Help! Strange Problem with 23" Apple Cinema Display and Wireless Internet

For some reason, Safari runs much much slower on my housemates new 23" Apple Cinema Display than just on his new Macbook. He is running Tiger. We use Airport Extreme for house-wide wireless, and he has an Airport Express to connect to his printer. Here is what he wrote:
"Last night, I was watching videos on ABC.com --- not a problem to watch on my laptop screen (new Macbook) - very fast. Then, after dinner, I plugged in my external screen (Apple Cinema Display), and it was so slow and wouldn't load. I unplugged the screen, and it was lighting fast again, so I watched the videos on my laptop screen. This morning, I was plugged into the external monitor and the Internet was slow to check my email. I unplugged the screen, and it's lightning fast now on my laptop screen.
Does this make any sense??? Why would my external monitor affect the Internet speed? "

I am having a similar problem as well. When I attach my 23" cinema display to my MacBook core 2 duo, my connection to the internet immediately stops working. I have tested this several times and it happens every time I connect the Cinema Display to my MacBook. When I disconnect the Cinema Display, my internet connection works perfectly again. I'm stumped as to why this happens.
I have tried several different searches on the forums, but have found no other threads besides this one. I'm I won't have to suck it up and pay the $50 for the call to AppleCare support.

Similar Messages

Wi-fi not working with Apple Cinema Display and Bluetooth-peripheral

Hello everyone.
I have a MacBook Pro (Retina, 13-inch, Late 2013), with OS X Yosemite 10.10.1. My problem is that when I use my macbook in closed-clamshell mode, the wi-fi connection becomes very slow and it regularly drops.
My external display is a Apple Cinema Display, 22-inch, model M8149. My mouse is the Apple Magic Mouse and my keyboard is the Apple Wireless Keyboard.
Thanks in advance for helping me.

Good day Brett,
I followed the suggested steps and for Wireless Diagnostics is all ok, but my connectivity problems are not solved.
I have made two report of the analysis. The first in "normal" mode is downloadable here. The second in closed-clamshell mode is downloadable here.
Could you tell me what is going on?
Thank you a lot

How can I run a 27" Apple Cinema Display and another monitor from my MacBook Pro?

Hi everyone,
I recently purchased a brand new 15" MacBook Pro to replace my old one. I was told when ordering it that I would be able to hook up two external monitors to it using the Matrox DualHead2Go hardware. So, I also bought a 27" Cinema Display (non-Thunderbolt since it wouldn't work with the DH2Go). However, when I contacted Matrox they said their products don't support screens as large as the 27" ACD.
Bummer!
So, my question is: does anyone know how I can hookup a 27" Apple Cinema Display at 2560x1440 and a Acer 22" monitor at 1685x1050 (or, anything less really) to my new MacBook Pro?
I've looked around and haven't been able to find a good answer.
Thanks for your help!

Will something like this work? A USB to VGA adapter? Can I use this at the same time that I have a Cinema Display plugged into the Mini-DVI port and will they both work at the same time? Anyone know?
http://www.amazon.com/StarTech-Monitor-External-Adapter-USB2VGAE2/dp/B002FJQXXC/ ref=sr_1_2?s=electronics&ie=UTF8&qid=1329870330&sr=1-2

23" Apple Cinema Display and accurate color?

I use a dual 2.3GHz Power Mac G5 along with a 23" Apple Cinema Display fro graphic design work. I used to use a Pantone Color calibration device when I was using third-party monitors with my Macs. Now that I have the Cinema Display, I haven't bothered to calibrate this wonderful monitor. I had heard that using Apple's displays with their own computers would display the most accurate color possible without calibration. I haven't changed the color settings in my Adobe products, and I'm not seeing any significant issues with my color outputs. Any advice on this subject is appreciated.

If the display uses the Apple Display Connector (ADC)
<http://upload.wikimedia.org/wikipedia/commons/thumb/0/09/AppleDisplayConnector.j pg/800px-AppleDisplayConnector.jpg>
you will need a DVI to ADC adapter.
<http://www.welovemacs.com/mb571zla.html>
They are also available on eBay.
<http://www.ebay.com/itm/Apple-DVI-to-ADC-adapter-A1006-for-Apple-LCD-monitors-Mi nt-Condition-/251073546040?pt=US_Video_Cables_Adapters&hash=item3a75264738#ht_5 0 0wt_1089>

Help - Strange Problem with Yahoo email on my 3G iphone

When I send email from my yahoo account - very often the recipient gets multiple copies - sometimes as many as 5 copies. Sometimes they only get one copy. But usually they get multiple copies. I have been to the ATT store a few times trying to get this cleared up but no one can figure out why this happens and what to do about it.
Does anyone else have this problem.
Does anyone know why and what to do?

Using the email validation tool, did you get any errors?
When you install the Yahoo account to your Q10, it accepts your email address and password and sets up the account?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Apple Cinema Display and mini display port

I have purchased (for a ridiculous price) an adapter to allow me to use my cinema display with my new macbook pro retina system. While it does work it doesn't seem to allow me to use anything but best for display which is only 1280x800 resolution which is far less than this monitor supports and looks terrible. In fact for making me spend $30 for a stupid adapter is is very disppointing.
So first question is can anyone tell me if there is some way to get this to actually work?
Second question along the same line, is that I also purchased an adapter for mini display to VGA for using with projector systems that I sometimes need to hook up to when I go onsite to customer facitilites and within about an hour of being attached to an Acer monitor my entire system seg faulted and crashed with a hard reset. Equivalent to the Windows blue screen of death. I've never had this happen before and wondering if this is a known problem?
Thanks for any info you can provide.
Glenn

Do you have your MacBook Pro in mirror mode or extended desktop mode (System Preferences > Displays)? If it's in mirror (the default) then the external display will be limited to the MBP's screen resolution. I use my miniDisplayPort -> DVI adapter all the time with my Sony Bravia TV and have no issues displaying 1920x1080 on the extended desktop.
Officially, the Retina MBP supports:
- 2880 by 1800 pixels (Retina mode)
- 1920 by 1200, 1680 by 1050, 1280 by 800, and 1024 by 640 pixels (scaled mode)
In System Preferences > Displays make sure your display setting is Extended and then select the extended display panel and select 1680x1050. See if that helps. If that works, then try the 1920x1200 setting if your display supports it. BTW, the extended display panel only appears if you actually have the external display connected.
What make/model monitor are you using?
Never heard of a system crashing because it was connected to a projector. I also use the miniDisplayPort -> VGA adapter to project and have never had a problem.
Is there anything else going on with your MBP?

Please Help! Problem with 'whistle' when using Audition and Premeire Pro 1.5 with Audigy

I hope someone can help with this problem. The start of these messages is at the bottom. Any suggestions would be most welcome...Bill Allen
Hi David (00)... Thanks for your reply. I just wanted to let you know
that I am going to post all of this correspondence on as many Creative
forums that I can find in hopes of finding someone that help with this
problem.
I will advise you of the results
Thanks again...Bill Allen
----- Original Message -----
From: "Creative Americas Customer Support"
To: "Bill Allen"
Sent: Saturday, February , 2006 :39 AM
Subject: Re: Creative System Information (English : Adobe Premeire Pro .5
and Adobe Audition) (KMM987992I6636L0KM)
> Sir,
>
> The only time that I've see a random tone being generated as you
> decribe, it was necessary to update the system bios to correct.
>
> While we are able to playback and record with the card and it's included
> software, Adobe continues to not allow you to monitor what you're
> recording. As best we can tell, there's nothing wrong with the card and
> I would urge you to check with Adobe for any "monitor recording"
> switches that may be in their software.
>
> For faster service please reply with previous correspondence when
> replying to this email.
>
> Best Regards
> ,
>
> David (00)
> Team Specialist
>
> Technical Support
> Creative Labs Americas
>
>
>
> To provide feedback on your "Creative Experience" please click on the
> following link:
>
Link removed
>
> This link is provided so that you may provide feedback on your "Creative
> Experience". If you require further troubleshooting or have additional
> questions simply reply to the original mail and we will be glad to
> assist you.
>
> Original Message Follows:
> ------------------------
> Jeen... I appreciate, very much, your reply. But I don't appreciate
> trying
> to be 'ping ponged' back and forth between Creative and Adobe. While I
> realize that you can only deduce a solution from what I tell you, I
> believe
> that if you re-read my description of the problem you will realize that
> the
> problem is with the sound card and it's associated software. Otherwise
> why
> would the system work as expected when it it turned on the next morning?
>
> I would also like to know where the 'tone' comes from. When recording
> video segment (with audio) through the firewire connection of the
> Creative Audidgy 2ZS card, after a short while the audio is replaced with a
> constant tone (as I said, it is about 200 Hz). If I record the video thru the
> Firewire connection and the audio through the 'Line-In' connection,
> there is no problem with the recording the audio track 'tone free'. However,
> sometimes but not always, when the audio is played back the tone will
> appear. This has happened with both Adobe Premeire Pro .5 and Adobe
> Audition. It is not in the audio track of Adobe Premeire Pro .5 or
> Adobe Audition, so the problem must lie with the Creative Audigy 2ZS card or
> it's associated software. I'm sure your audio engineers have knowledge of
> this problem and I would appreciate an answer.
>
> Thanks...Bill Allen
>
> ----- Original Message -----
> From: "Creative Americas Customer Support"
>
> To: "Bill Allen"
> Sent: Friday, February 0, 2006 2:5 AM
> Subject: Re: Creative System Information (English : Adobe Premeire Pro
> .5
> and Adobe Audition) (KMM9780I6636L0KM)
>
>
>> Dear Bill,
>>
>> Thank you for replying back to Creative Technical Support.
>>
>> With regards to your issue, I understand that you are having
> difficulty
>> getting the audio to record from the applications Adobe Premiere Pro
> .5
>> and therefore not sound during the playback.
>>
>> As you have verified that the sound card is working properly with the
>> other applications on recording or playback, this could be due to the
>> improper setup for the audio in the Premiere Pro .5.
>>
>> You may like to refer to Adobe for assistance on the configuration of
>> the audio settings as we are not in a better position to advise you on
>> third party software.
>>
>> Should you have not sound or issues with our software, please feel
> free
>> to contact us so that we can assist you.
>>
>> For faster service please reply with previous correspondence when
>> replying to this email.
>>
>> Best Regards
>> ,
>>
>> Jeen
>> Technical Support
>> Creative Labs Americas
>>
>>
>>
>> To provide feedback on your "Creative Experience" please click on the
>> following link:
>>
Link removed
>>
>> This link is provided so that you may provide feedback on your
> "Creative
>> Experience". If you require further troubleshooting or have additional
>> questions simply reply to the original mail and we will be glad to
>> assist you.
>>
>> Original Message Follows:
>> ------------------------
>> Ronshone... Thanks for your reply.
>>
>> Here is the information you requested:
>>
>> Sound Blaster Audigy 2ZS
>> PID: 0 03 50 00 00 00 02
>> Driver Ver: 2.8.4
>> Firmware : 0.0.0
>> Model: SB.0350
>> Serial Number: MSB0350472004288E
>> Ink stamp: 50SPT470D
>>
>> The Audigy 2ZS is the only sound card installed
>> The Audigy 2ZS card is at least one slot away from the graphics card.
>> The Audigy 2ZS card is one slot away from another card.
>> The Audigy 2ZS card is properly seated in the PCI slot.
>> The PC's internal wires have been moved away from the Audigy 2ZS card
> .
>> The 'on-board' sound is disabled thru the BIOS.
>> The 'on-board' game port is disabled thru the BIOS.
>> The XP Pro operating system is up to date with all updates.
>> There were no background operation going at the time of the tests.
>> The anit-virus program was closed
>> The CPU is not overclocked.
>> And, I am the Administrator.
>>
>> The card came in a Creative retail Box along with the input unit that
>> mounts
>> in the dri've bay. I can't recall what that is called.
>>
>> I have relocated the sound card to a slot that is 4 slots away from
> the
>> graphics card and slot away from another card, in this case an
>> additional
>> IDE dri've controller.
>>
>> I have performed the test you outlined. I found that I had to record
>> using
>> the 'line in' source input. And I had to playback using the 'wave'
>> source.
>> As far as that test is concerned, everything worked. However when I
>> bring
>> up Adobe Premeire Pro .5 I do not hear the audio when capturing, and,
>> even
>> though the audio meters in Premeire Pro in indicate that there is
> audio
>> playing from the audio track on playback, I hear nothing from the
>> speakers.
>>
>> I then brought up the Creative Speaker Settings requester and did a
>> diagnostic test. All tests indicated "pass". But when I click on the
>> 'Speaker Settings' and perform the 'Speaker Test' I hear nothing. I
>> should
>> add that in both mixers, the Creative Surround Mixer and the Play
>> Control
>> mixer, all inputs and outputs are selected (not muted). Also when I
>> performed this same test yesterday the 'Speaker Test' worked fine.
>>
>> On rebooting, the 'Windows XP' sound is heard from the speakers.
>> Bringing
>> up Adobe Premeire Pro .5, the audio played as expected. The 'Speaker
>> Test'
>> in the Creative Surround Mixer also worked as expected.
>>
>> I then recorded the rest of my program using the Adobe Premeire Pro
> .5
>> 'Capture' requester and when I tried to playback from within Adobe
>> Premeire
>> Pro .5 all I got was a constant tone (about 200 Hz), even though the
>> audio
>> meters in Adobe Premeire Pro .5 indicated that the audio was good and
>> had
>> no constant tone.
>>
>> I rebooted the computer and brought up Adobe Premeire Pro .5 and my
>> program. Without making any changes to either mixers, Adobe Premeire
> Pro
>> .5
>> performed, and the sound played, as expected. In the 'Play Control'
>> mixer
>> only the 'wave' was acti've. All the rest were muted. It was the same
>> for
>> the 'Creative Surround Mixer'.
>>
>> I am at a loss as to what the problem is. Any help would be
>> appreciated.
>>
>> ...Bill Allen
>> ----- Original Message -----
>> From: "Creative Americas Customer Support"
>> @customercare.creative.com
>> To: "Bill Allen"
>> Sent: Monday, February 06, 2006 9:42 PM
>> Subject: Re: Creative System Information (English : Adobe Premeire Pro
>> .5
>> and Adobe Audition) (KMM933384I6636L0KM)
>>
>>
>> Dear Bill,
>>
>> Thank you for contacting Creative Technical Support.
>>
>> With regards to the issue you are having, I would really appreciate it
>> if you can provide me with the model number of the sound card. It
>> should
>> start with CT or SB followed by 4 numbers found on the sound card. I
>> also need the serial number which can be found on the sticker and the
>> ink stamp which is printed on the back of the card. This number will
>> not
>> be located on any of the stickers and it will not be labeled. It is a
>> number that has been stamped on the card itself, possibly near the
>> outer
>> edge of the card to determine the best advice for you.
>>
>> Did the sound card come pre-installed in the PC, comes in a plastic
>> cover or brown box or did it come in a Creative retail box package?
>>
>> Below is a link that may help with the location of the model number.
>>
>> Run a keyword search for SID2456 from the link below.
>>
Link removed
>>
>> I also need you to try the following recording test.
>>
>> SELECT THE RECORDING SOURCE IN SURROUND MIXER
>> . Go to Start Programs Creative SB Audigy Surround Mixer
>> 2. Click on the Recording Source (should be on the right side of the
>> mixer under the REC label)
>> 3. Change the recording source to Analog Mix
>> 4. Mute the other analog sources (Mic, CD Audio, Auxiliary, Tad, PC
>> speaker) that you don't want recorded with the audio stream.
>> 5. You may wish to select "record without monitoring" by click on the
>> (+) above the Analog Mix recording source. This keeps the source from
>> playing out to speakers while recording
>>
>> TEST RECORD THE AUDIO
>> . Go to Start Programs Accessories Multimedia Sound Recorder.
>> 2. Click the Record button (red dot)
>> 3. Talk into the microphone
>> 4. Let it record the source for a little bit
>> 5. Hit the Stop button (black square)
>> 6. Hit the play button (single arrow pointing right)
>> 7. You should now hear the audio that you recorded.
>>
>> If you are still having issues, I recommend you to ensure the
> following
>> for the audio installation and test:
>>
>> - The card is the only card installed other than the Graphics card.
>> - The card is at least one empty slot away from the Graphics card.
>> - Place the soundcard away from all the others.
>> - That the card is seated properly in the PCI slot.
>> - Move the PC's internal wires away from the soundcard.
>> - That the on-board sound on your motherboard is disabled through the
>> BIOS.
>> - That the on-board gameport is disabled through the BIOS.
>> - That your motherboard BIOS is up-to-date.
>> - That the operating system is up-to-date with the latest service
> packs
>> and patches.
>> - That there are no background applications open when you attempt the
>> solution.
>> - That the anti-virus program is disabled.
>> - That if you are over-clocking your system, return all options to
>> their
>> recommended settings.
>> - That you access the PC with administrator rights.
>>
>> Do reply back to me if you are still having problems with any error
>> messages prompted. Thanks.
>>
>> For faster service please reply with previous correspondence when
>> replying to this email.
>>
>> Best Regards
>> ,
>>
>> Ronshone
>> Technical Support
>> Creative Labs Americas
>>
>>
>>
>> To provide feedback on your "Creative Experience" please click on the
>> following link:
>>
Link removed
>>
>> This link is provided so that you may provide feedback on your
>> "Creative
>> Experience". If you require further troubleshooting or have additional
>> questions simply reply to the original mail and we will be glad to
>> assist you.
>>
>> Original Message Follows:
>> ------------------------
>> User Detail
>> ----------------------------------------
>> Name : Bill Allen
>> Email Address : [email protected]
>> Self Description : Intermediate PC User
>>
>> Creative Product Information
>> ----------------------------------------
>>
>> Problem Type : I need help with a third-party software application
>>
>> Problem lies with:
>> ----------------------------------------
>> Adobe Premeire Pro .5 and Adobe Audition
>>
>> Customer's System Specification
>> ----------------------------------------
>>
>>
>> Detailed Problem Description
>> ----------------------------------------
>> I can hear sound from my computers speakers. The diagnostic tests
>> performed by the Creative software are all "OK", but I cannot record
>> audio with either of the two programs mentioned above. I have checked
>> everything I can think of and all of the settings appear to be "OK".
> I
>> have also updated the driver for the sound card. What can I do?
>>
>> Attachment :
>> [ Attachment Type: application/octet-stream Name: CTSi.cab]

TeamRacing6 wrote:
b noir,
I can get itunes to start if I disable Bonjour or if I "repair" it first. Sometimes I can repair Bonjour though add/remove programs, sometimes it will only "repair" using WinRar. Sometimes I have to "repair" Bonjour 2 or 3 times to get iTunes to start.
I have tried uninstalling and reinstalling at least a dozen times. I have tried redownloading iTunes at least 5 times and from different links. This leads me to believe that the dnssd.dll file is not itself corrupt, but this newest version is causing a conflict with XP somewhere somehow.
Team, iTunes 10.2.2.12 has just been released. I installed it and checked, and BonJour's been updated to version 2.0.5.0, and there's a new 2.0.5.0 version of dnssd.dll on my system. So I reckon it's worth a try updating to that to see if it's of any help with your trouble.

MBP will not work with 20" Apple Cinema Display

I got a 20" ACD about a month ago. Everything was working perfectly until I disconnected it from my laptop a few days ago. After I reconnected, the display will no longer work. The MBP does no even show the needed resolution in preferences any more. I have tried every setting there is and have reset my PRAM. Nada.
Anybody have a clue?

OK Here's the correct link to the thread about which cards work best on a windoze box...
http://discussions.apple.com/thread.jspa?messageID=1104428

Desperately seeking help. mod_jk problem with Apache 2.0.49 and Tomcat 4.1.

Hi All,
I am setting up the connection between Tomcat 4.1 and Apache 2.0.49 since past 3 days without success.
I downloaded the
JK 1.2
JK 1.2 Binary Releases
mod_jk_1.2.5_2.0.47.dll from apache site.(renamed it to mod_jk.dll as instructed). Now the problem is that after making the other settings in server.xml, httpd.conf,workers.properties
My Tomcat does not show any error when i uncomment the following code
<Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
               port="8009" minProcessors="5" maxProcessors="75"
               enableLookups="true" redirectPort="8443"
               acceptCount="10" debug="0" connectionTimeout="20000"
               useURIValidationHack="false"
               protocolHandlerClassName="org.apache.jk.server.JkCoyoteHandler"/>
which is the code for mod_jk2. I don't understand this as I have download the file for JK1.2.
I am getting the mod_jk.conf file generated but it is generated with the following code.
<IfModule !mod_jk.c>
LoadModule jk_module C:/Program Files/Apache Group/Apache2/modules/mod_jk.dll
</IfModule>
JkWorkersFile "C:/Program Files/Apache Group/Tomcat 4.1/conf/jk/workers.properties"
JkLogFile "C:/Program Files/Apache Group/Tomcat 4.1/logs/mod_jk.log"
JkLogLevel info
<VirtualHost localhost>
    ServerName localhost
    JkMount /admin ajp13
    JkMount /admin/* ajp13
    JkMount /webdav ajp13
    JkMount /webdav/* ajp13
    JkMount /examples ajp13
    JkMount /examples/* ajp13
    JkMount /tomcat-docs ajp13
    JkMount /tomcat-docs/* ajp13
    JkMount /manager ajp13
    JkMount /manager/* ajp13
</VirtualHost>
AGAIN , here I fail to understand why it is generating the jk_module with forward slash.
(I HAVE GIVEN THE ps=/ property in worker.properties)
Once I add the path in quotes i.e.
LoadModule jk_module "C:/Program Files/Apache Group/Apache2/modules/mod_jk.dll"
I am able to start the apache server. but am failing in the connection test ie. not able to view the examples directory.
Plz. advise me , I am really going crazy over this stuff.
Thanks in advance,
Vishy.

I am confused, you need to pick modjk2 or modjk.
I would not use a precompiled modjk2.dll , I have and had security problems.
I would compile it from source. The instructions are in the source package.
If you use modjk, your on the right steps, modjk is more difficult to setup. than modjk2.
For modjk2 all you need is
LoadModule jk2_module C:/Program Files/Apache Group/Apache2/modules/mod_jk2.dll
and the workers2.properties in /conf directory, that's it.
Tomcat 4 and above come 'stock' with ajp workers turned on port 8009.
First make sure modjk is loaded in Apache.
Make sure all 30 lines of error page is uncommented on http.conf
You can do this by http://servername/SOMEbogusAddress
just go to apache page, then try and load a non-existing page
You should see at bottom of page:
Apache/2.0.49 (Unix) mod_jk2/2.0.4

Problems with two apple ID's and synching of contacts

I have accidentally created two apple ID's: one without an email domain and my actual one linked to my accounts everywhere on my Mac, iCloud and iPhone.
I am trying to sync my contacts from my iPhone that have synced with hotmail into iCloud and it won't do it. I have synced what I have in iCloud with the phone though. Also, how come you cant sync contacts from Google anymore when you add your google account mail?
Secondly, I am trying to update aps and it gives me the other ID to sign in with instead of my actual account even though the account is entered into my iPhone correctly (in iCloud).
My actual iCloud account from the iCloud website does not have all the tabs that I have into my iCloud account on my Mac. Any ideas how I can fix all this mess?
Thank you in advance for the suggestions.

Setup another user account on your Mac. You use your Apple ID on your account and the other person on theirs.
Open System Preferences > Users & Groups then select the Password tab.
Click the gold padlock icon bottom left corner of the window. You will be prompted for your admin password.
Now click + to create a new acocunt.
Select: Show fast user switching menu as and make a selection.
You should see an account name top right corner of your screen. From there you can switch accounts.

Help!- problems with Adobe reader v9 ifilter and sqlserver2005

Hello,
I am trying to implement search of pdf in binary column in sqlserver2005 using Adobe ifilter.
I installed full version of Adobe reader v9 which has its own Ifilter on my server (runs on 32bit)
I have done the following based on what i read on the internet:
The environment variable path has an entry for Adobe reader the following:D:\Program Files\Adobe\Reader 9.0\Reader
exec sp_fulltext_service 'load_os_resources', 1;
exec sp_fulltext_service 'verify_signature', 0;
Restarted services SQLserver and MSFTESQL
The issue is upon installation, sqlserver wasn't showing the doc type 'pdf' so I registered the dll but the sys.fulltext_document_type is showing this path instead and I can't update system tables in sqlserver2005.
Also when I carry out a search based on my Fulltext setup, it returns 0 rows.
select
document_type, path from sys.fulltext_document_types where document_type = '.pdf'
document_type               Path
.pdf                                c:\program Files\Microsoft SQL Server\MSSQL.3\MSSQL\Binn\AcrodIF.dll
Please what can I do to correct things and make it possible to carry out my pdf search
THANKS!!!!

I have resolved this myself as follows:
I deleted the pdf document type entry from table sys.fulltext_document_types
At the command prompt, in the directory where Acrobat reader is installed which was on my server D drive path:
     d:\program Files\Microsoft SQL Server\MSSQL.3\MSSQL\Binn\ and REGISTERED the ifilter dll - AcrodIF.dll
exec sp_fulltext_service 'load_os_resources', 1;
exec sp_fulltext_service 'verify_signature', 0;
Restarted MSFTESQL service
This resolved the problem and all these searches work:
select * from tablename where freetext(*, 'searchword')
select * from tablename where contains(*, 'searchword')
Search phase also work:
select * from tablename where freetext(*, '*search phrase*')
select * from tablename where contains(*, '*search phrase*')

Apple cinema display and newer G5

do i need a special adaptor to hook up this monitor to a G5/dual 2.3 ghz with a GeForce 6600 video card, the IT guy is dragging his feet on getting these 2 to work together...
http://arstechnica.com/reviews/4q00/g4cube_cd/images/cd-big.jpg
G5 dual/2.0 Mac OS X (10.4.5) 600 gigs of space

Does this article contain anything useful?
(17385)

Strange problem with wtk 2.5.1 and jre/jdk 5

Hi all,
i can't seem to build any of the example projects nor my own when i hit build it throws up a dialog stating that it can't find the jdk...but when i looked at the bat files all of the paths are correct...anyone else have this problem or know what's wrong

Cross posting
http://forum.java.sun.com/thread.jspa?messageID=9870469
Cross posting is rude.
db

HT5624 I am haveing problem with my apple I'd and password

Hi. I have an apple id but when I try to update my games and stuff it giving me a different apple I'd

All apps are tied to the apple ID that originally downloaded or bought them.
If you change apple IDs, you will still need to use the old apple ID and password to update the apps.
Only solution is to delete the apps and buy them again under the new ID.

Apple Cinema Displays and Windows

I know it will work with windows. But what kinda of
controls will I get? Since there is no controls on
the monitor it seems besides brightness. Or it all
depended on the graphic cards to be in control?
What is default color temp then?
Windows XP Pro

WinACP <http://sourceforge.net/projects/winacd/> will give you a monitor control panel in XP.

Help! Strange Problem with 23" Apple Cinema Display and Wireless Internet

Similar Messages

Maybe you are looking for