Help uninstall/ install

i have an old version of itunes 4.8 or something, i'm trying to uninstall. i then want to install the latest version. i went to add/remove programs in the control panel. it no longer is in the add/remove, but there is still an icon on desktop and when i click on it goes to itunes. thank you for reading this, please help if you can!

THANK YOU very much! I am re-installed now.  Although I have not checked to see if InDesign is behaving better.  It was moving very slow and the wheel spun every time I did something.  I have a brand new iMac (16GB memory/3.4 GHz) and there’s no reason for the lag.  At least from the computer anyway.  I printed out your solution and saving it in case I or one of my co-workers have this issue.  Thanks Again.
Lena Jones
Graphic Artist
<Deleted - personal information> Professionals
Corporate
<Deleted - personal information>
I AM CARESOUTH

Similar Messages

  • HELP cannot install itunes, uninstall itunes or uninstall quicktime

    Hello - Went to upgrade my orig ver of itunes ver 6.0 to the video version to grab some music videos, and that is when all went to ****.
    Got an error message that itunes was unable to install to my PC. PC is p4 running winXP sp2/3.
    Error code: -3
    Went to uninstall itunes, and got another error message that itunes was unable to complete the task with NO error code.
    Also went to uninstall quicktime, and apparently the uninstall is not on my computer. I reinstalled quicktime, which was successful, but after rebooting and then trying to uninstall quicktime again, i got same error message quicktime uninstall cannot be found, quicktime cannot be uninstalled.
    I did manage to get itunes successfully uninstalled.
    After reboot and clearing out temp files and cache then again rebooting, then attempting to reinstall itunes VER 6.0 just the plain version for windows, NOT the video version, i again got error message that itunes was unable to install on my PC.
    PLEASE HELP.
    i cannot seem to load in a successful ver of itunes to listen to music, nor uninstall/install quicktime.
    FYI -
    Quicktime will not work when opened through itunes and through start menu, but will work when opened in the program and actually clicking on the .exe button.
    pls help! i just want regular ver of itunes without video now, just want to listen to music what i bought, thnx

    YES it is a Windows 98 based software, since i was unable to find older ver of Quicktime, i used what i had.
    Incidentally, i figured out that when i went to install the Video ver of itunes, the ver 6.0 did not completely uninstall, some files were somehow corrupted.
    There is a round about fix located on the windows tech support section which deleted previous Windows installer programs that in turn deletes older versions of programs, you pick from a list that the program detects, and it will delete all older versions.
    Here is the link, if you know anyone that needs it..
    it fixed my PC, after using this program i was able to successfully install 1st- the standalone version of quicktime, then itunes without incident.
    http://support.microsoft.com/default.aspx?scid=kb;en-us;290301
    bunny

  • I accidentally uninstalled my WLAN on my notebook and need help re-installing it.

    I have a HP Pavilion dv9925nr and need help re-installing the WLAN. Please help!

    Hello,
    This unit came with VIsta and here is a driver for this unit.
    its either going to be the Broadcom
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-66350-1&cc=us&dlc=en&lc=en&...=
    Or intel driver
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-66349-1&cc=us&dlc=en&lc=en&...=
    I am an HP employee.
    "Did my response help with your issue? If so, please give me Kudos by clicking the "Kudos" button or mark the post that solved your problem as the Accepted Solution. Thanks!"

  • Please help me install Pattern Maker?

    Hi,
    At this url:
    http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=4687&fileID=4377
    I am trying to download the plugin:
    CS5_Optional_PlugIns_Installer.dmg
    The files included are:
    CS5 Optional Extension Plug-Ins.mxp
    and
    CS5 Optional Plugins.mxp
    When I attempt to install either of these two files, I get the following error message:
    I’m attempting to place the installs into the Applications> Photoshop CS5 > Plugins > Optional Plugins
    I'm on a Mac OS 10.6.5
    What am I doing wrong?
    Thank you so much in advance.
    Linda

    Hi Linda,
    Sorry if I confused, but I just want to make sure that you don't have all the Optional Extensions installed and enabled (as fallout from trying to get Pattern Maker working). There are two .mxp files and you mentioned trying to install both of them. I haven't seen the actual error you get, so to be safe, I'm suggesting that you make sure to disable all the Optional Extensions (and likely all the optional plug-ins that you don't need too). The installers are/were all or nothing (I'm not sure if the installer .mxp for Optional Extensions has been removed yet).
    The quickest way to uninstall is using the CS5 Service Manager application (IF it is working correctly). The quickest way to tell if they are installed is probably to look in this folder: Adobe Photoshop CS5/Plug-Ins/Extensions.
    There should only be 5 there by default: Enable Async IO, FastCore, MMXCore, MultiProcessor Support, and ScriptingSupport.
    Let me know if you still have  questions,
    regards,
    steve
    Linda1234567 wrote:
    Okay, now I have no idea what you're talking about!  pattern maker is working.  Can't I just leave well enough alone?:-)Linda
    Date: Wed, 29 Dec 2010 17:37:09 -0700
    From: [email protected]
    To: [email protected]
    Subject: Photoshop Macintosh Please help me install Pattern Maker?
    Hi Linda,
    If you installed the Optional Extensions Plug-Ins.mxp you'll want to uninstall all of them (or disable them and only enable individual ones that are needed). To uninstall, use the CS5 Extension Manager. To disable them, individually rename each with a tilde(~) as the first character.
    regards,
    steve
    >

  • Please Help Me Install Flash player

    Yesterday I unintentionally uninstalled Flash player with a product named Perfect Uninstaller. During the process it states that the Item I uninstalled will be uninstalled now and forever. Every time I click "run" to install it starts for about one second and then stops completely. I'm beginning to think that they meant it and that there is some sort of blocking going on but that is just an assumption. I hope some can help. I am a novice obviously. I am using Windows XP.
    Message was edited by: toad eater
    Message was edited by: toad eater

    Yeah it was a goofy move for sure. Thanks for the direction I finally got the download..
    Date: Thu, 16 Sep 2010 15:50:03 -0600
    From: [email protected]
    To: toad eater
    Subject: Flash Player Please Help Me Install Flash player
    Hi, I really don't know how one can "unitentionally uninstall" anything, LOL
    You can go to this site and follow the instructions:
    http://kb2.adobe.com/cps/191/tn_19166.html
    Thanks,
    eidnolb
    >

  • After uninstalling/installing itunes  I get this  window   16 bit MS-DOS Subsystem  The NTVDM CPU has encountered an illegal instruction CS:05aa IP:0480 OP: 6300 72006f Choose close to terminate. Neither ignore or close works

    After uninstalling/installing itunes ( there was a problem with an upgrade) the following window appears on my account page
    16 MS-DOS Subsystem
    The NTVDM CPU has encountered an illegal instruction CS:05aa IP: 0480 OP:6300 72006f Choose close to terminate application. Neither close or ignore works. I don't know where to turn for help I'm using Windows 7. Thx

    Hi there,
    I am also experiencing this problem, but with 1.4.2_06. Last week (late Jan 2005) the dynamic versioning was working fine, downloading and installing the latest version of Java as required.
    However now (early Feb 2005), I am finding that after downloading the latest version of Java and beginning the install, I am getting this error.
    I was hoping that you may have heard of a cause or solution for this problem?
    Many thanks

  • Firefox user when i try to access my gmail,orkut and yahoomail i get this error message Error code: sec_error_expired_certificate All the other sites are working fine please help Plugins installed:

    Firefox user
    when i try to access my gmail,orkut and yahoomail i get this error message
    Error code: sec_error_expired_certificate
    All the other sites are working fine
    please help
    Plugins installed:
    == URL of affected sites ==
    http://

     Hi,
    One of my ex-colleagues has installed a NI-DAQ 6.5 in our system. [And I do not see any other naitional instruments card in the CPU of the computer, may be he removed it] I deleted the account and all his files in the system. When I am trying to install version8.0, its not getting installed and giving me a message that I should uninstall the previous version by going to Add/Remove programs in the control panel.
    I tried doing that, but the "Change/Remove" button does not seem to work...[There is no response and so unable to install the new version...]
    Any idea how can this problem be solved?
    It is a windowsXP operating system with SP2 installed on a machine with P4 processor.
    Thanks

  • Satellite A200-13O: Help in installing Vista Ultimate from Basic

    I need help in installing Windows Vista Ultimate in my A200-13O.
    My current operating system is Windows Vista Basic and I want to upgrade it to Windows Vista Ultimate.
    Based on the driver download section I need the following drivers to be installed.
    1 Windows Vista RTM
    2 Intel ICH7M Chipset Utility native
    3 Intel 945GM Display Driver
    or
    3 nVIDIA G72MV-A3/NB7P-GS Display Driver
    4 Realtek ALC861D Audio Driver
    5 Realtek 10/100 8101E/ Gigabit 8111B LAN Driver
    6 Synaptics Touch Pad Driver (with LuxPad)
    7 ALPS Touch Pad Driver
    8 TI Multiple Digital Media Card Reader
    9 TOSHIBA Software Modem
    10 Intel Golan Wireless LAN Driver
    11 Intel Kedron Wireless LAN Driver
    12 Atheros Wireless LAN Driver
    13 Chicony Camera Software
    14 Bluetooth Stack for Windows by Toshiba
    15 Bluetooth Monitor
    16 TOSHIBA Value Added Package
    17 TOSHIBA Flash Cards Support Utility
    18 TOSHIBA Hardware Setup Utility
    19 TOSHIBA Supervisor Password
    20 TOSHIBA SD Memory Utilities
    21 TOSHIBA ConfigFree
    22 TOSHIBA Assist
    23 TOSHIBA Speech System
    24 TOSHIBA Extended Tiles for Windows Mobility Center V1.01
    25 TOSHIBA Fingerprint Utility V5.6.0.3221
    I have already downloaded most of them but I can't find some like [2] Intel ICH7M Chipset Utility, [11] Intel Kedron Wireless LAN Driver, [23] TOSHIBA Speech System. Also some of the drivers are not installing properly.
    Can you please help me out.

    The chipset driver you can get on the Intel webiste
    www.intel.com
    But I think the driver could also be in the display driver because its the same chip.
    The WLAN driver I have found on the Toshiba website so download and install it.
    The speech system could be integrated in the sound driver.
    But download and install all drivers and the system will work.

  • Need help in installing a SATA hard drive with 865pe NEO2

    Hello there
    I need a help in installing a Sata hard drive ,it is WD 250 GB , my motherboard is 865PE Noe2 , the bios is the latest one
    already I got another old hard drive ,not a Sata ,a regular IDE one installed as a master hard drive
    I want to install the sata hd as a slave for the IDE hd for now to transfer the files and documents
    I already physically installed the Sata hard drive yet the problem is that it was listed in the bios , I followed some of the steps here in the forum mentioned but all what I got is I found it listed as the fourth IDE master , not as the primary IDE slave
    in Windows Xp Sp2 it is not listed of course in the windows explorer , but it is there in the device manager
    look I am very confused and I tried most of the combinations in the ide configuration in BIOS 
    what should I do coz I am feeling so bad and stupid  ,you can consider me a n00b in this hard drive thing

    1st the sata drive cannot be listed as a slave drive to the ide master [key word=ide-can be configured as master OR slave, master IF only 1 hd, master and slave IF 2 hds], on the sata controler you can have master and slave, the ide cable has two connectors for the hds, sata has only 1 hd connector.
    are you wanting to install the sata as primary master and move the operating sys to that drive, if so you will need an IMAGING software to move an operating system OR you could do a fresh operating system install to the sata drive then install your programs.

  • Does any update help to install and run myFaces components?

    Hi.
    I have JSC trial. And didn't make update.
    I can't install myFaces component library. Why?
    Does any update help to install and run myFaces components, and other component library?
    Thanks.

    Hi,
    The following thread could be of help for you:
    http://swforum.sun.com/jive/thread.jspa?forumID=123&threadID=48666
    Cheers :-)
    Creator Team

  • I need help to install Toolkit CreateJS for Flash CS6.

    Hi,
    I need help in installing CreateJS for Flash CS6. I had downloaded the Toolkit CreateJS from here: http://www.adobe.com/go/downloadcreatejs and here: http://www.adobe.com/devnet/createjs/articles/using-flash-pro-toolkit- createjs.html. When I attempted to install the extension using Adobe Extension Manager, the installation files did not have the required .zxp or .mxp files. It only had a file with a .mxi extension. Please advise. Thanks.

    Why installing IIS o_O?
    For Installing a developer Machine just install Oracle Developer suite; for testing your forms you use OC4J ("start OC4J instance" in start menu), and you can run your forms in web; no need for a aditional webserver (don't believe there's an OC4J connector for IIS available; and if so I wouldn't use it either ;-))
    For Installing a server for "productional" use install Oracle Application Server (available on otn) which comes with an Apache as webserver and all the other needful things for runnung forms on the web.
    For configuring both of them just take a look at the documentations on http://otn.oracle.com
    regards
    christian

  • Can somebody help me install IOS 6.1.3 back to my iPhone 4. IOS 7 is not smooth enough as perfect as IOS 6.1.3. I am stuck with this OS, every app gives a break for 4-5 seconds to open up. And playing games in this OS using iPhone 4 is really crazy

    Can somebody help me install IOS 6.1.3 back to my iPhone 4. IOS 7 or 7.0.4 is not smooth enough as perfect as IOS 6.1.3. I am stuck with this OS, every app gives a break for 4-5 seconds to open up. And playing games in this OS using iPhone 4 is really crazy. Very much disappointed that I am not able to use IOS 7 and cant go back to what I need.

    Mani Dinesh wrote:
    Can somebody help me install IOS 6.1.3 back to my iPhone 4.
    Downgrading is not supported by Apple.
    Mani Dinesh wrote:
    ...every app gives a break for 4-5 seconds to open up. ...
    See this discussion...
    https://discussions.apple.com/message/23731048#23731048

  • Help, I installed parallel and windows, and opened videos (on an external hard disk) with windows, and now cannot open them with Mac, and use i movies.  How do I reverse this?

    Help, I installed parallel and windows, and opened videos (on an external hard disk) with windows, and now cannot open them with Mac, and use i movies.  How do I reverse this?

    Paragraphs help the reader, just saying.
    What are you actually trying to do? Why do you need "DVD size" folders if you're creatng an Archive on an external hard drive?
    Also, I understand burning folders instead of individual photos or albums gives you more space on a DVD.
    It makes no difference at all.
    How can I keep the captions on my photos (not events) when I print or transfer to a new folder?
    You can export while writing the metadata to the file in most cases.
    Tne only way I know is to copy photos from the Windows to folders on my HD, then copy and paste photos or albums or events to HD, then create a new folder and fill it to the appropriate DVD size. 
    HD? Another HD? You use HD there in a way that makes no sense. What's the point of 'DVD size'?
    I also thought I should download future photos to my Canon programming that comes with EOS cameras and edit and then decide which photos to save to iPhoto library and which to save only to my archival HD?
    Does this have any relation to the previous questions? You know you can delete from iPhoto, right?
    You're somewhat confused and you need to
    1. Decide what exactly you want to do
    2. Then go about it.
    If I understand you correctly - and there's no guarantee that I do -  the easiest thing is to bring all your Photos into iPhoto and do everything from there.
    You can have an archive on an external disk, you can sort and select and edit with or via iPhoto
    Regards
    TD

  • I can't uninstall/install FireFox due to a pop-up that says: Your computer must be restarted to complete a previous upgrade of Firefox..."

    This problem arose when I attempted to upgrade my existing FireFox browser to the new FireFox 7. I clicked through the auto-update, but didn't think that anything changed, as the browser didn't look like the image in the feature explanation image I was viewing. I then tried to download Firefox 7, and when I tried to instal it, this process began.
    I can't uninstall/install FireFox due to a pop-up that says: Your computer must be restarted to complete a previous upgrade of Firefox..." When restarted and attempted again, the same pop up appears and I am stuck in an infinite loop.
    I cannot locate the Mozilla file within my program files to try and delete cantankerous upgrade components, which seems to resolve this issue for many people. See: https://support.mozilla.com/en-US/questions/796566
    I also tried completely deleting Firefox, which didn't work either-- I ended up doing a system restore, only to be met with the same infinite loop.
    Now, when I click on the Mozilla icon, nothing happens. No window opens, no error message, nothing.
    Why can't I find the Mozilla folder in my Programs File but can see it in Control Panel "Add or Remove Programs" (though I can't uninstal due to infinite loop)?

    It is probably because you are not properly closing Firefox. Restarting your system would make sure that Firefox had terminated, but you do not have to do that.
    To properly close Firefox on Windows systems, use
    :File > Exit or "Firefox:" button > Exit
    When you get the message "Firefox is already running" it is too late, and you must force termination of Firefox through the Windows Task Manager before restarting Firefox. Windows 7 has a keyboard shortcut to save you a step "Ctrl+Shift+Esc" then on "Processes" tab, select "firefox.exe" and use the "End Process" button. More thorough would be to right-click on the "firefox.exec" and choose "End Process Tree".
    You would find firefox.exe in a Mozilla folder in your program files, but y0u would not want to delete it there, you would need to use the Control Panel which you have already identified and do it from there -- but generally you would not need to do that, and there is nothing in what you have posted to indicate that you should. But if you did do that, then don't let the install start Firefox for you as you would want to use you existing desktop icon or method of starting Firefox, and should decline having Firefox install start Firefox for you. When the install starts then invoke Firefox in your normal manner. This should eliminate problems of creating a new profile rather than using your old profile.

  • PHOTOSHOP ELEMENTS 6  'HELP' NOT INSTALLED

    I have PSE 6 installed from the Adobe disk on a Mac which uses OS10.5.8.
    When I try to access the 'PSE 6 HELP' component from the toolbar I see the following - "Could not find the Adobe Help Application.You may need to re-install the application and the Help component." Why is Help not installed from the installation disk?
    Is re-installation is the only solution?  And if so, do I have to un-install first, or will re-installation print over the existing version? If it requires un-install, how do I do this?
    Thanks in advance

    Don't worry. Most products now have on-line help.
    http://help.adobe.com/en_US/PhotoshopElements/6.0_Mac/

Maybe you are looking for

  • How to edit the existing ALV grid output variants

    Hi experts, The requirement states that I need to rearrange the existing output layout of the ALV & add a few fields in it. Currently, the output layout is stored as a variant. The program uses the FM LT_DBDATA_READ_FROM_LTDX, to load the fields asso

  • Can't create Test package

    Hello, After updating up to 22 version new problem has apeared in Test management. I can't create test package in newly created Test Plan. There are disabled buttons like a "create package" and "change package" on the "Test package management" screan

  • JDev 10.1.3: ADF - How to end-date a record

    I am fairly new to ADF, but I have a question about end-dating a record. I have a table with a start and end date on a record. I have created a method that will allow the user to copy a record. I have an ADF read-only table, they select the record an

  • How to load a base64-stream (always WORD-document) in large XML files ( 1 MB) into ORACLE 10 table

    On our Oracle Server there are multipe XML files that I have to read and put the data into an ORACLE 10 table. I have to threath these XML files one by one. In the XML there is also een base64-stream (alwasys a WORD-document) .  This base64-stream ex

  • How Can insert the records into Excel_sheet by using SQL Task-SSIS ?

    As per requirement , insert the records in excel sheet(DT)  by using SQL Task-SSIS . I used SQL query in SQL Task-SSIS: e.g.., INSERT INTO [DT$B1:B1] VALUES ('COMMM') but error:Executing the query "INSERT INTO [DT$B1:B1] VALUES ('COMMM') " failed wit