Help, uninstall of Encore CS4 causing problems with PP CS4

I uninstalled Adobe Encore CS4 (from my Master Suite).  It gave me an error at the end, but I ignored it and used encore for my project.  I thoguht that all was fine.  I opened up Premiere Pro today and it opens, but it does not have the abiltiy to do HD any longer.  Obviously whatever failed in my re-install affected Premeier.  I am going to uninstall CS4 and reinstall the entire program.  Any advice to ensure a clean uninstall and a clean install?  I've had issues before and want to do it right - and hopefully once.
Lisa
P.S. I am running Windows 7, 64 bit
Message was edited by: lisaellensegal

Lisa,
Most likely is that you have been bitten by the "Revert to Trial" Bug. Did you recently update PrPro?
If so, and you are missing your HD options, you now have the "trial," though you started with the full-paid version.
Here are the steps to perfrom:
Deactivate, if possible
Uninstall PrPro
Download and run the Adobe Cleaner Tool CS5 (that is the latest) several times, rebooting in between each
Install PrPro and immediately Update, before launch
Launch and test.
Good luck,
Hunt

Similar Messages

  • My Mac is 15 months old and all of a sudden it has started resetting the time and date then I get a message saying not all apps will work because of the pre Jan date any help as to why ? Causing problems with wireless router.

    My Mac book pro is 15 months old and now suddenly it has started resetting the date and time, causing problems with applications and my wireless access. Any suggestions as to why this is happening and how to fix it?

    Seems the time isn't being saved to your computer correctly, it may be a corrupt file that isn't saving the time anymore.
    You can move the
    com.apple.systempreferences.plist
    file out of your Users/Library/Preferences folder to the desktop and reboot.
    then go to your System Preferences > Date and Time and set a time server close to your location (or in your time zone)
    (trash the file on the desktop if no ill issues occur later on)
    or you can follow/bookmark these support docs to reset your PRAM and SMC (and for future reference)
    http://support.apple.com/kb/TS2570
    http://support.apple.com/kb/TS1440
    http://support.apple.com/kb/HT1455
    http://support.apple.com/kb/ht3964
    http://support.apple.com/kb/HT1379
    http://support.apple.com/kb/ht1379
    http://support.apple.com/kb/HT1509
    I don't remember exactly where OS X is keeping it time settings now, but I think one of those choices should help resolve your issue and won't hurt anything giving them a shot. Perhaps someone else could refresh my memory.

  • Bridge CS4 causing problem with Explorer

    The following problem occurred after adjusting the Preference settings in Bridge CS4:
    When right clicking on any folder in either the Explorer or on the Desktop the following message is displayed "Windows Explorer has stopped working..."
    This is now the second time, after having created two new User Accounts. While Explorer worked perfectly for a couple of days before adjusing the settings in Birdge, I cannot undo what has caused this problem and am reluctant to setup yet another user account. Also, I can't figure out which setting change might have caused this.
    Is it possible that by adjusting the settings in Bridge it added a shell extension to Windows Explorer?
    Has anyone here encountered a similar problem after adjusting the settings in Bridge?
    Cheers,
    Michael
    Ps. this has also been posted in the Phtoshop forum

    Sorry, did not read your mail before sending the first answer...
    Glad it works again. Remember that OSX is Unix based and does not like
    strange caracters in folder and file names, and no slashes or dot's except
    the dot before a three caracter file extension.
    SOLVED!

  • Help me Please ,, I have a problem with Flash cs4

    hi ,,
    I wanna design a website by using Flash cs4 or flash cs3 ,, my computer's system is Viste ...
    in the last day I was download the flash program from Adobe website .. the terial one ...
    then when I complete the download ,, I go to install the program ...BUT !!!! always it show me a Alert window and it asked me to close (( Internet explorer )) to make the install contnue ,,, and the problem is that im not opening any programs eather internet explorer when Im install flash program
    help me please what can I do I need the program very important
    and thank you so much
    Salma

    I use task manager ,,, the result is = no Internet Explorer are RUNNING
    and the Flash cs4 program still does not install
    thank you but the problem still not solve

  • Help with add file name problem with Photoshop CS4

    Frustrating problem: Help with add file name problem with Photoshop CS4. What happens is this. When I am in PS CS4 or CS3 and run the following script it runs fine. When I am in Bridge and go to tools/photoshop/batch and run the same script it runs until it wants interaction with preference.rulerunits. How do I get it to quit doing this so I can run in batch mode? Any help is appreciated. HLower
    Script follows:
    // this script is another variation of the script addTimeStamp.js that is installed with PS7
    //Check if a document is open
    if ( documents.length > 0 )
    var originalRulerUnits = preferences.rulerUnits;
    preferences.rulerUnits = Units.INCHES;
    try
    var docRef = activeDocument;
    // Create a text layer at the front
    var myLayerRef = docRef.artLayers.add();
    myLayerRef.kind = LayerKind.TEXT;
    myLayerRef.name = "Filename";
    var myTextRef = myLayerRef.textItem;
    //Set your parameters below this line
    //If you wish to show the file extension, change the n to y in the line below, if not use n.
    var ShowExtension = "n";
    // Insert any text to appear before the filename, such as your name and copyright info between the quotes.
    //If you do not want extra text, delete between the quotes (but leave the quotes in).
    var TextBefore = "Lower© ";
    // Insert any text to appear after the filename between the quotes.
    //If you do not want extra text, delete between the quotes (but leave the quotes in).
    var TextAfter = " ";
    // Set font size in Points
    myTextRef.size = 10;
    //Set font - use GetFontName.jsx to get exact name
    myTextRef.font = "Arial";
    //Set text colour in RGB values
    var newColor = new SolidColor();
    newColor.rgb.red = 0;
    newColor.rgb.green = 0;
    newColor.rgb.blue = 0;
    myTextRef.color = newColor;
    // Set the position of the text - percentages from left first, then from top.
    myTextRef.position = new Array( 10, 99);
    // Set the Blend Mode of the Text Layer. The name must be in CAPITALS - ie change NORMAL to DIFFERENCE.
    myLayerRef.blendMode = BlendMode.NORMAL;
    // select opacity in percentage
    myLayerRef.opacity = 100;
    // The following code strips the extension and writes tha text layer. fname = file name only
    di=(docRef.name).indexOf(".");
    fname = (docRef.name).substr(0, di);
    //use extension if set
    if ( ShowExtension == "y" )
    fname = docRef.name
    myTextRef.contents = TextBefore + " " + fname + " " + TextAfter;
    catch( e )
    // An error occurred. Restore ruler units, then propagate the error back
    // to the user
    preferences.rulerUnits = originalRulerUnits;
    throw e;
    // Everything went Ok. Restore ruler units
    preferences.rulerUnits = originalRulerUnits;
    else
    alert( "You must have a document open to add the filename!" );

    you might want to try the scripting forum howard:
    http://www.adobeforums.com/webx?13@@.ef7f2cb

  • I just updated my latest java but the update is causing problems with some externale devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device

    i just updated my latest java but the update is causing problems with some external devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device.
    Is this possible and how do i do that?
    Anyone who responds thanks for that!
    Juko
    I am running
    Hardware Overview:
      Model Name:          Mac Pro
      Model Identifier:          MacPro1,1
      Processor Name:          Dual-Core Intel Xeon
      Processor Speed:          2,66 GHz
      Number of Processors:          2
      Total Number of Cores:          4
      L2 Cache (per Processor):          4 MB
      Memory:          6 GB
      Bus Speed:          1,33 GHz
      Boot ROM Version:          MP11.005D.B00
      SMC Version (system):          1.7f10
      Serial Number (system):          CK7XXXXXXGP
      Hardware UUID:          00000000-0000-1000-8000-0017F20F82F0
    System Software Overview:
      System Version:          Mac OS X 10.7.5 (11G63)
      Kernel Version:          Darwin 11.4.2
      Boot Volume:          Macintosh HD(2)
      Boot Mode:          Normal
      Computer Name:          Mac Pro van Juko de Vries
      User Name:          Juko de Vries (jukodevries)
      Secure Virtual Memory:          Enabled
      64-bit Kernel and Extensions:          No
      Time since boot:          11 days 20:39
    Message was edited by Host

    Java 6 you can't as Apple maintains it, and Java 7 you could if you uninstall it and Oracle provides the earlier version which they likely won't his last update fixed 37 remote exploits.
    Java broken some software here and there, all you'll have to do is wait for a update from the other parties.

  • If I install the update to Adobe Reader 10, will that cause problems with Acrobat Pro 9?

    Firefox (version 15.0.1) is telling me I need to install an update to Adobe Acrobat 9.4 in order to view pdf files in my browser. I use Acrobat Pro 9. The update is actually Adobe Reader 10, and I am wondering if I install this, will it cause problems with my version of Acrobat Pro?
    Because I am not sure if this is so, I have temporarily disabled the plug-in and now pdf files download automatically rather than display in my browser. I would prefer they open in my browser but do not want to upgrade to Acrobat X.
    My OS is Windows Vista. I did not include the "troubleshooting information" file because I'm not sure what specific info is being requested.
    Thanks for any help.

    Hi WMdotcom
    did you try to view pdf with your acrobat pro 9 ?
    see
    [https://support.mozilla.org/en-US/kb/change-firefox-behavior-when-open-file Change what Firefox does when you click on or download a file]
    [https://support.mozilla.org/en-US/kb/set-how-firefox-handles-different-file-types
    Set how Firefox handles different types of files]
    thank you

  • My host name changes every few days, since Xmas adding a macbook its changed 6 times. Do I need to stop this? Does it cause problems with sharing between the iMac and macbook?

    my host name changes every few days, since Xmas adding a macbook its changed 6 times. Do I need to stop this? Does it cause problems with sharing between the iMac and macbook?

    There are several possible causes for this problem.
    1. Two (or more) computers on the local network have the same Bonjour name, such as "X's-MacBook-Pro.local".
    2. You have two simultaneous connections to the same local network: probably Ethernet and Wi-Fi. If applicable, disconnect the Ethernet cable or turn off Wi-Fi.
    3. A Mac wakes from sleep due to network traffic. This is due to a bug in OS X that may only affect some models.
    4. A device that gets its network address from the router wakes from sleep, and the address it was using before has been assigned to another device.
    5. A third-party wireless router has incompatible settings or firmware. In that case, refer to the manufacturer or ISP for support. Restarting the router may help, temporarily.
    6. See also this support article.
    Rename the computer in the Sharing preference pane.

  • Problems with Photoshop CS4

    Hello everyone
    I installed windows 7 64 bit and photosop cs4 32 and 64 bits.
    For plugins I use photoshop 32 bit as in 64 does not recognize.
    When working with photoshop 32-bit, or by applying a similar effect on photoshop I "refresh" the screen, I have to give it a click above to update the action taken, which does not happen with the 64-bit . previously when I had windows XP 32 bit, something similar is happening but unlike in Windows 7 is became more confusing to work
    Looking at other forums I found that others feel the same.
    I recently upgraded my computer to Windows 7, but can not get photoshop to work properly.The refresh of the windows is horrible, it gives many hitches, even small images at 72 dpi. It's pretty desperate
    I have a similar problem with Photoshop CS4, Windows 7 and the Gforce 9800 GTX version 196.21
    The problem is that whenever I do a process, I have to click on the screen to react, is quite annoying if you retouch photos, anyone know where the problem may lie?
    Example of my problem
    I apply an effect to an image flash
    Notice how after applying it, as is the browser and thumbnail in the layer and I obviously still displays the result on the image.
    After giving up a click:
    I shows the effect applied, but the display remains the same, as in the layer.
    If I want to leave the viewer have to make the preview zoom.
    As you will see work like this is very annoying and stressful. Any help?

    Did you update PS CS4 to 11.0.1? If not update before turning off opengl or updating Nvidia drivers.
    There are also new nvidia drivers out 197.13. However, newer does not always equal better.

  • Problem with Flash CS4. Getting error when rendering the file

    Hi,
    One of my user is facing problem with Flash CS4.
    Whenever he tries to render the file, Flash CS4 throws the below error and only after restarting the application, it works fine for another couple of hrs.
    Please some one help me to resolve this issue.
    -Prabagaran L.

    Please post in the Flash forum. This forum is for suite specific issues.
    Bob

  • Hello! Help me please, I have a problem with the program occurred after the upgrade to version 3. 6. 16, namely by pressing the button 'Open a new tab' nothing happens. ?

    Hello! Help me please, I have a problem with the program occurred after the upgrade to version 3. 6. 16, namely by pressing the button 'Open a new tab' nothing happens. ?

    This issue can be caused by the Ask<i></i>.com toolbar (Tools > Add-ons > Extensions)
    See:
    * [[Troubleshooting extensions and themes]]

  • GEARAspiWDM.sys causes problems with PlexTools.

    The unsigned driver GEARAspiWDM.sys (to be precise: upper filter) that you installed on my system cause problems with my DVD recorders (Px-716A and PX-760A). First thing I notice is a longer responce time (delay). The big problem is that there are faults while trying to erase or burn DVD media (I mostly use rewritable disks). I love iTunes, but just keep in mind why using upper filters and/or unsigned drivers is a very-very bad idea! The least you can do is to ask the user if he/she wants to install this driver.
    I found my way to uninstall the driver manually. Later I found the uninstaller from Gear Software:
    http://www.gearsoftware.com/cfknowledgebase/articledisplay.cfm?articleid=295
    Now iTunes will alert me that it cannot burn disk on every startup. You know what? I don't care about this future! So don't bother me every startup!

    We know about the large file support issue (though this given version of it looks new to me) and work on it.
    There is no intent to set __GNUC__ for us, nor we recommend users to define __GNUC__ with our compiler.
    However we do have (another) solution for this issue and it will be available in one of the upcoming Sun Studio eXpress releases.
    regards,
    __Fedor.

  • Firefox causing problems with web pages and Yahoo

    Firefox has been causing problems with:
    Yahoo: no matter how many times I reset the font size, it is always much bigger. Also the "From" box (where my name and email address appear) has shrunk;
    This does not happen in Chrome
    A particular website has suddenly stopped working: http://explore.org/#!/live-cams/player/kitten-rescue-cam
    Instead of seeing what is going on on the live cam, all I get is a green screen.
    This does not happen in Chrome.
    I have followed all the instructions:
    - Reset Firefox
    - Disabled and re-enabled add-ons
    And yet this has solved nothing. Iam now having to run both Firefox and Chrome at the same time. This is highly frustrating. I like Firefox better than Chrome but problems are mounting up and I do need help.
    Has any one got some idea what is going on?
    Many thanks...
    Anna

    Hi
    Thank you for your input. I did try Font size, reset, zoom... the lot and nopes it did nothing. As I said the problem is in Firefox, not in Chrome.
    I also checked the plug-ins issue and it seems they are in order and up to date.
    Now this morning, the website has been working again in Firefox (was working ok in Chrome).
    Overall Firefox's performance with some websites is poor. My health report confirms the number of times it crushes (many times a day, which is highly frustrating). I am keen to keep Firefox as it is so mcuh nicer in many ways than Chrome but it's performance is an issue for me... sigh...

  • Problem with Photoshop CS4 after migration to new Mac

    I just migrated from an old Mac to a new Macbook Pro running Mavericks. I'm having a problem with Photoshop CS4. Specifically, two things:
    1) When I open an image in Camera Raw, I get this error:
    Fatal error - missing component
    /Library/Application Support/Adobe/Adobe Version Cue CS4/Client/4.0.0/VersionCue.framework
    2) When I try to save anything, it tells me it can't because of a program error.
    I've looked around for a solution. Apparently I had to install Java, but that hasn't solved the issue. A couple of people mentioned that reinstalling would work for a similar problem. My problem with that is that my disk is on the other side of the world and my new macbook doesn't have a disk drive anyway. So I logged into my Adobe account hoping to see a download link for software I have licences for, but there isn't one.
    So my question is firstly, whether there is a simpler solution to the errors I am getting and, if not, if there's a solution to reinstalling Photoshop CS4 without the disk.
    Thanks!

    Did you use Apple's migration tool?  It misses a lot of support files, especially in the Application Support directories.
    You'll have to copy those files manually, or reinstall the app.

  • When I print a photo to my epson printer, it comes out larger than the original photo - so the photo prints beyond the borders. Tried readjusting all sorts of things but nothing helps. I had this same problem with my Canon. any ideas?

    When I print a photo to my epson printer, it comes out larger than the original photo - so the photo prints beyond the borders. Tried readjusting all sorts of things but nothing helps. I had this same problem with my Canon. any ideas?

    Crop to the print size before pringing
    LN

Maybe you are looking for

  • Concatenate all data in one row to all data in the next row

    I have been trying to do this, I'm sure simple procedure, with no luck Table A B 1 5 2 4 3 3 4 2 5 1 and put all the data from each row into a single cell to look like this Table C 1:5, 2:4, 3:3, 4:2, 5:1 I imagine I need to use some kind of recursiv

  • Feature Request: Never deactivate my credit

    My credit is mine and was paid for. I do not want it to be deactivated. No matter how seldom I use it. Do not tell me again that it is deactivated please. @Forum visitors: Please reply to this post if you agree with me. Solved! Go to Solution.

  • DefaultMessageListenerContainer Does receive message from remote Queue

    I am developing an application where I need to consume JMS messages from JMS Queue on remote weblogic server 10.3.3.0. My application is deployed WLS 10.3.2.0 and I using Spring 2.5.6. In my spring configuration, I have used Springframework's Default

  • Mac OS X srever newbe and ichat

    Hi, I'm trying to set up a new mac mini server in a public school. But I'm having problems with iChat server. Firstly,I cannot turn it off in Server Preferences, the green balloon is always on (always). Also in the Server admin -> settings -> general

  • Statistical Setup failure - Purchasing application

    We upgraded our R/3 Plug-In from 2002.1 to PI 2004.1. To test the setup and init process,we ran the statistical setup run for 02 application. The setup program is successful but the documents are not posted into the MC02....SETUP tables. Checked the