HELP URGENT : accessing servlets thru localhost

Hi
I am trying to access a servlet on iplanet from another servlet through forms .
when i specifically give the machine name and point the form to
<form name=form1 action=https://avenger/servlet/LoopQualServlet method=GET>")
where avenger is my local machine it works fine and gets redirected .
But when i try to do the same thing using localhost its not working..
I gave
<form name=form1 action=https://localhost:8443/servlet/LoopQualServlet method=GET>");
Can someone pls help me figure where i am going wrong.???
Thx in advance ..
prabhu

hi
thx for the help.....Yes, both servlets are on the same iplanet server.I just tried the samething u said before seeing your post ...It worked....
But one more question though.... I am trying to access the first servlet from the browser by typing https://localhost:8443/servlet/LoopQualPage...This then gets redirected to another servlet thru forms i discussed earlier...It doesnt work .
But when when i try to say specifically https://avenger/servlet/LoopQualPage it works fine....
Any clue how i can access the first one the same way i was able access the second one thru forms without actually typing the machine name???????
Thx in advance
prabhu

Similar Messages

  • I want to buy an in-app purchase but i don`t remember my security questions and i cant access my recovery email either, what can i do? i have 100$ on my account and cant use it because of that problem, please help URGENT

    I want to buy an in-app purchase but i don`t remember my security questions and i cant access my recovery email either, what can i do? i have 100$ on my account and cant use it because of that problem, please help URGENT

    If you have a rescue email address on your account then you can use that - follow steps 1 to 5 half-way down this page will give you a reset link on your account : http://support.apple.com/kb/HT5312
    If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact Support in your country to get the questions reset : http://support.apple.com/kb/HT5699

  • PASSWORD FOR FLODERS  PLEAse  HELP URGENT

    HI ALL
    please tell me the method of implementing password
    provision for some folders/files in the system.
    it should ask for password authentification before
    opening when i click on the folder.
    please help urgent
    thanks
    belur

    Hi Swaroopba,
    It can be very well done thru Form based Authentication.
    For eg let me explain with respect to Tomcat.
    Go to
    $TOMCAT_HOME/webapps/examples/WEB-INF directory.
    Please add the following code in it.
    <security-constraint>
    <web-resource-collection>
    <web-resource-name>Protected Area </web-resource-name>
    <!-- Define the context URL's to be protected -->
    <url-pattern>/jsp/security/protected</url-pattern>
    </web-resource-collection>
    </security-constraint>
    Please add the following code in it. And you have to specify the roles for it.
    I hope this will be helpful for you.
    Or if you want it in an application, please let me know.
    Thanks
    Bakrudeen

  • Getting Servlet Exception while accessing servlets after deployment

    Hi,
    Iam getting a Servlet Exception while accessing servlets after deploying into weblogic 8.1
    Error 500--Internal Server Error
    javax.servlet.ServletException: [HTTP:101249][ServletContext(id=9599010,name=MyWeb,context-path=)]: Servlet class LoginServlet for servlet LoginServlet could not be loaded because the requested class was not found in the classpath F:\bea\weblogic81\samples\domains\examples\MyWeb\WEB-INF\classes;F:\bea\weblogic81\samples\domains\examples\.\examplesServer\.wlnotdelete\extract\examplesServer_MyWeb_MyWeb.
    java.lang.UnsupportedClassVersionError: LoginServlet (Unsupported major.minor version 49.0).
         at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:834)
         at weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.java:535)
         at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:373)
         at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:315)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6718)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3764)
         at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2644)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)
    My Folder Structureis like this,
    F:\bea\weblogic81\samples\domains\examples\MyWeb
    MyWeb is the projectName
    F:\bea\weblogic81\samples\domains\examples\MyWeb\WEB-INF
    Inside WEB-INF, i have web.xml and weblogic.xml, and classes directory with servlet classes.
    Any help will be appreciated.
    Thanx in advance.
    Regards
    Ram

    Hi,
    Thanks for the reply.
    Yes you are correct, i compiled using jdk1.5.
    but my servlet code will not compile in jdk1.4 version since i used advanced vaector classes in that.
    Is there any settings like script file that need to be changed so that i can point to my jdk1.5 compiler rather than the default one pointed by weblogic.
    Thanks in advance
    Ram

  • Dead bb curve 8520 SOS need help urgently

    hi guys
    I am experiencing several major issues
    1) my phone had been resetting itself a lot lately without reason and randomly. I then downgraded the OS from 5 to 4 then it continued to do the same so I did the removal of the vendor.xml file in the folder of my win 64 bit computer then the blackberry desktop manager, the BBSAK and the computer cannot find my phone. All it does is flash the LED several times in red and wont even restart or show some evidence of life. I have tried everything please help urgently!!!!!

    Hi and Welcome to the Community!
    Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain connected to a known-good wall charger (not PC USB):
    With the battery inside, connect your BB to the wall charger
    Leave it alone for 2 hours, no matter what the LED or the display does
    Remove the battery
    Wait 15 minutes
    Insert the battery
    Wait another 2 hours, no matter what the LED or the display does
    This has been known to "kick start" some BBs.
    It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
    Obtain a known good and already fully charged additional battery...use it in your BB and see what happens
    Obtain access to a known good and identical BB...use your battery in it and see what happens
    The results of this will indicate if it's your BB or your battery that has the problem.
    Otherwise, please try this drastic method:
    KB27956 How to recover a BlackBerry smartphone from any state
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Please Help - Urgent

    Hi everyone, I�m having problems with Java Mail, I have just installed it along with the java activation framework, they are located in the following directories:
    JavaMail: C:\jdk1.3.1\lib\javamail-1_2[1]
    Java activation framework: C:\jdk1.3.1\lib\jaf1_0_1[1]
    I have the classpath set as: C:\jdk1.3.1\lib\mail.jar;C:\jdk1.3.1\lib\activation.jar
    When I try to compile the sample code provided with these packages, msgsend.java using Jbuilder 2 I get the following errors:
    Error (36): cannot access directory javax\mail.
    Error (37): cannot access directory javax\mail\internet.
    Error (209): class message not found in class msgsend.
    Error (210): class MessagingException not found in class msgsend
    Error (134): class Session not found in class msgsend
    Error (134): variable Session not found in class msgsend
    Error (139): class Message not found in class msgsend
    Error (139): class MimeMessage not found in class msgsend
    Error (141): class InternetAddress not found in class msgsend
    Error (145): cannot access class Message.RecipientType;neither class nor source found for Message.RecipientType.
    Error (146): Variable InternetAddress not found in class msgsend
    Error (148): cannot access class Message.RecipientType;neither class nor source found for Message.RecipientType.
    Error (149): Variable InternetAddress not found in class msgsend
    Error (151): cannot access class Message.RecipientType;neither class nor source found for Message.RecipientType.
    Error (152): Variable InternetAddress not found in class msgsend
    Error (162): Variable Transport not found in class msgsend
    Error (170): class Store not found in class msgsend
    Error (172): class URLName not found in class msgsend
    Error (172): class URLName not found in class msgsend
    Error (189): class Folder not found in class msgsend
    Error (195): Variable Folder not found in class msgsend
    Error (197): class Message not found in class msgsend
    Error (197): class Message not found in class msgsend
    If I try to use another Java package to compile it I get even more errors (52), I cannot compile it by using the Javac command line compiler, it just says �Bad command or file name�.
    Can anyone tell me Why this is happening and how I might be able to fix it please, I need to start learning Java Mail quickly but at the moment I can�t even begin to do this until I can understand how to get this sample code to work.
    Thanks Everyone
    Noel

    First of all... don't post with topics like "Please Help - Urgent". The topic is supposed to reflect what the question is about.
    Secondly... think for a second. If mail.jar is in C:\jdk1.3.1\lib\javamail-1_2[1]... why are you with your classpath saying that mail.jar is in C:\jdk1.3.1\lib ?
    You classpath is supposed to point directly at you jar-files.
    /Michael

  • Cannot access servlet in tomcat4

    I'm a newbie to server side java. Please guide me.
    Installed Apache2 and Tomcat4 in Win2K. The installation seems OK because the index pages of both apache and tomcat appear when accessed as localhost on browser.
    I wrote (in fact, copied from a tutorial) a servlet, compiled and placed it at
    tomcat_root\webapps\ROOT\WEB-INF\classes as suggested in the tutorial.
    But it doesn't work when I access as:
    http://localhost:8080/servlet/MyServlet
    It reports a HTTP Status 404 error.
    By the way, when I run it as an example servlet it works fine. By that I mean I placed it inside the pre-existing tomcat_root\webapps\examples\WEB-INF\classes folder and ran as http://localhost:8080/examples/servlet/MyServlet
    My another puzzle is why the servlet needs to be accessed that way. I don't see any 'servlet' folder anywhere under my Tomcat installation, but it seems to be a must at the URL calling the servlet.
    Thank you.

    Take a look at the web.xml files, both in conf and in WEB-INF, you'll learn that the /servlet/ url is mapped to the invoker that tries to find your classes, but is bad to have active in production.
    Basically, you need to tell tomcat, through your web.xml the mapping between url (you may choose something other that servlet) and your actual servlets.
    Patrick

  • How to access Servlets in WLS examples

              I am trying to access Servlets stored in myserver/servletclasses/examples/servlets
              directory. .class files are here. When I tried to access a servlet in a browser,
              I am getting error. Can any one help me?
              

              In Weblogic 5.1, each example (souce code) in $WL_HOME/examples) comes with a very
              good and detail instruction. Read these instructions will definitely help you
              to understand Weblogic 5.1. Weblogic 6 is a little bit different, but most instructions
              are still useful.
              "magunta" <[email protected]> wrote:
              >
              >I am trying to access Servlets stored in myserver/servletclasses/examples/servlets
              >directory. .class files are here. When I tried to access a servlet in
              >a browser,
              >I am getting error. Can any one help me?
              

  • Installation help(urgent)

    hi e1
    i have developed a application using wireless toolkit.it is running well on my notebook.but when i try to install that jar file in my device which is Nokia 6600
    it gives a message "not supported"..
    anybody help .urgent

    i have changed it to CLDC 1.0 and the application got installed fine on my device
    now when i try to connect it through GPRS it is giving the following error
    Connect Symbian OS error=-1520: System error
    i am using HTTP connection and it connects to a servlet which is there on server.
    i am having full GPRS connection
    any suggestiong please help
    thank very much for previous replies

  • Starting tomcat problem, please help urgent

    I installed jwsdp on windowsXP . The log file gives this following error when i try to start tomcat:
    java.util.zip.ZipException: Access is denied
         at java.util.zip.ZipFile.open(Native Method)
         at java.util.zip.ZipFile.<init>(ZipFile.java:127)
         at java.util.jar.JarFile.<init>(JarFile.java:138)
         at java.util.jar.JarFile.<init>(JarFile.java:80)
         at org.apache.catalina.loader.StandardClassLoader.addRepositoryInternal(StandardClassLoader.java:1081)
         at org.apache.catalina.loader.StandardClassLoader.<init>(StandardClassLoader.java:200)
         at org.apache.catalina.startup.ClassLoaderFactory.createClassLoader(ClassLoaderFactory.java:202)
         at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:141)
         at java.lang.reflect.Method.invoke(Native Method)
         at org.apache.commons.launcher.ChildMain.run(ChildMain.java:269)
    Bootstrap: Class loader creation threw exception
    java.lang.IllegalArgumentException: addRepositoryInternal: java.util.zip.ZipException: Access is denied
         at org.apache.catalina.loader.StandardClassLoader.addRepositoryInternal(StandardClassLoader.java:1109)
         at org.apache.catalina.loader.StandardClassLoader.<init>(StandardClassLoader.java:200)
         at org.apache.catalina.startup.ClassLoaderFactory.createClassLoader(ClassLoaderFactory.java:202)
         at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:141)
         at java.lang.reflect.Method.invoke(Native Method)
         at org.apache.commons.launcher.ChildMain.run(ChildMain.java:269)
    PLEASE HELP ,URGENTLY NEEDED TO SHOW SOME WORK ON THIS.
    THANKS
    jim

    Hi,
    I have a similar problem, i try to deploy a JAR file built on AIX 5.2 platform (jvm 14.1) into Tomcat 5.5.7 running on Windows platform when i try start Tomcat it's fail with the fellowing message
    SEVERE: Error deploying web application directory usi
    java.lang.IllegalArgumentException
         at java.util.zip.ZipInputStream.getUTF8String(ZipInputStream.java:299)
         at java.util.zip.ZipInputStream.readLOC(ZipInputStream.java:238)
         at java.util.zip.ZipInputStream.getNextEntry(ZipInputStream.java:73)
         at java.util.jar.JarInputStream.<init>(JarInputStream.java:58)
         at java.util.jar.JarInputStream.<init>(JarInputStream.java:43)
         at org.apache.catalina.util.ExtensionValidator.getManifest(ExtensionValidator.java:368)
         at org.apache.catalina.util.ExtensionValidator.validateApplication(ExtensionValidator.java:187)
         at org.apache.catalina.core.StandardContext.start(StandardContext.java:3942)
         at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:759)
         at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:739)
         at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:524)
         at org.apache.catalina.startup.HostConfig.deployDirectory(HostConfig.java:909)
         at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:872)
         at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:474)
         at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1106)
         at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:310)
         at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1019)
         at org.apache.catalina.core.StandardHost.start(StandardHost.java:718)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1011)
         at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:440)
         at org.apache.catalina.core.StandardService.start(StandardService.java:450)
         at org.apache.catalina.core.StandardServer.start(StandardServer.java:683)
         at org.apache.catalina.startup.Catalina.start(Catalina.java:537)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:271)
         at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:409)

  • Accessing servlets using login and goto

    Hi,
    I'm having a problem in accessing servlets without visiting the DesktopServlet. There is no problem if the servlet does not require a parameter, but if I try to pass a parameter to the servlet, it does not pass the parameter -
    Without visiting the DesktopServlet when I try to visit an servlet X , it gives me a session exception.
    Thrown SessionException : Invalid service host name.
    I use the following code to login and go to the servlet :
    String redirectTarget = "login?&goto=" + req.getRequestURI() + "&hotelComponent=" + hotelComponent;
    resp.sendRedirect(redirectTarget);
    Inside the doGet of the servlet, I now try to read the hotelComponent parameter -
    String hotelComponent = req.getParameter("hotelComponent");
    But now I get a null. I can not get the hotelComponent parameter. Any suggestions will be very helpful
    Thanks in advance
    Partha

    Thanks for the suggestions ! The original problem of not being able to pass parameters like -
    "login?&goto=" + req.getRequestURI + "?param=" + value"
    has been solved by encoding the URL string sent to resp.sendRedirect.
    However the suggestion you have given regarding setting of cookies in the browser might have a bearing on my actual problem. I'm trying to do away with the redirection to the login servlet in the DesktopServlet.
    Here is what I'm trying to do to make our website searchengine friendly - using WGET scrape the DesktopServlet and set it as the index.html. When somebody tries to access the links which are ordinary servlets, it gives a session exception. I catch the session exception and in the catch block use "login?&goto" to do a response.sendRedirect. This does a login and gets me the session.
    All the servlets work fine except for one which is identical to the ones working except for the fact it is a post from a form on the DesktopServlet. Here I get a HTTP 400 Bad Request error. I've noticed that when I clear the cache and try I get a better response.
    Any suggestion on how to overcome this ( possibly by setting cookies ) would be greatly appreciated.
    Thanks in advance

  • Username and password- Need help urgently!

    Hi
    1) First of all, i have received an email stating that my account under Removed personal information to comply withCommunity GuidelinesandTerms and Conditions of Use.
    is being banned as there is multiple obsence post. I need to clarify that i have never used my account to post in BBM forum before. Even if i did, is when i need help urgently for my BBM application. Currently i am holding 4 bbms now. Have never came across this issue. Pls check and advise
    2) I urgently need to setup my email accounts. But this time round, when i logged in, they required for my email id and password. And yes my email id is Removed personal information to comply withCommunity GuidelinesandTerms and Conditions of Use. all the while for the past 4 years. I am unable to log in. I tried all kinds of password but unable to log into my mobile settings
    Verfiy Blackberry ID
    This application requires u to verify ur blackberry id to continue.
    blackberry ID username:
    Removed personal information to comply withCommunity GuidelinesandTerms and Conditions of Use.
    password:
    I went to the forget password option, unfortunately as i have never retrieved my password before, i am unable to remember the security question as i did not use it for the past 4 years.
    Pls advise.
    Urgent and thanks

    Hi,
    I have been trying this technique for the past 4 days. It doesnt work no matter how i change the password at the link that u gave me. Even though it's being reset accordingly, i am still unable to log in the password at my mobile. i am 100% sure that i have entered the correct password at my mobile. ( verify blackberry id) . I want to setup new email accounts under "setup" . Upon me clicking " email accounts", it prompt for the one key password. I have never faced this issue before. I am very very sure that my password is correct. Pls advise as i need to add email accounts. Other programs are working fine without any password required being prompt. ie. blackberry world
    This is very very urgent to be resolved. Pls help.

  • Need help urgently with OS X and Windows 7

    I need help urgently.
    I installed Windows 7 on my macbook pro with OS X Lion. After installing Windows7, I accidently converted the basic volumes to dynamic volumes and now i can't even boot to OS X.
    Please help me how to recover my OS X Lion. If I have to delete Windows and bootcamp partitions, it is OK.
    I just want to get back my OS X bootable.
    Thanks

    thihaoo wrote:
    Sorry
    I can't even see the OS X partition when I hold down the "Option" key.
    I could see OS X and Windows partitions if I hold down Option key before changing the partitions to Dynamic partitions from Basic in Windows 7.
    Now can't see OS X partiton and only see Winodws partition but when I tried to boot onto Windows7 , I got BSOD and macbook pro restart.
    Please help
    The usual reason for the OSX partition to be invisible under these circumstances is that it has been trashed by Windows.
    Do you have a backup?

  • I Need Help to Access The Source Code From A Form to Know the Calculation Formula

    Hi,
    I Need Help to Access The Source Code From A Form to Know the Calculation Formula. The application is a windows form application that is linked to SQL Server 2008. In one of the application forms it generates an invoice and does some calculations. I just
    need to know where behind that form is the code that's doing the calculations to generate the invoice, I just need to get into the formula that's doing these calculations.
    Thank you so much.

    Hi, 
    Thanks for the reply. This is a view and [AmountDue] is supposed to be [CurrentDueAmount] + [PastDueAmount] - [PaidAmount]. The view is not calculating [PaidAmount] right . Below is the complete code of the view. Do you see anything wrong in the code ?
    Thanks. 
    SELECT     [isi].[InvoiceID], [ii].[DueDate], [SubInvoiceID] = [isi].[ID], [INV_FacilityID] = [if].[ID], [if].[FacilityID],
    [iff].[FacilityFeeID], [LoanID] = NULL, [isi].[PortfolioID], [isi].[Portfolio], 
                          [PaymentType] = [isis_fee].[SectionType], [Name]
    = [iff].[Name], [ReceivedAmount], [dates].[CurrentDueAmount], 
                          [PastDueAmount] = CASE WHEN ISNULL([ReceivedAmount],
    0) > 0 THEN [pastdue].[PastDueFeeAmount] + ISNULL([ReceivedAmount], 0) 
                          WHEN ISNULL([ReceivedAmount], 0) 
                          < 0 THEN /* We bring past due to zero and
    apply reset to current. */ CASE WHEN [pastdue].[PastDueFeeAmount] + ISNULL([ReceivedAmount], 0) 
                          < 0 THEN 0 ELSE [pastdue].[PastDueFeeAmount]
    + ISNULL([ReceivedAmount], 0) END WHEN ISNULL([ReceivedAmount], 0) = 0 AND 
                          [pastdue].[PastDueFeeAmount] < 0 THEN 0 ELSE
    [pastdue].[PastDueFeeAmount] END, [PaidAmount] = CASE WHEN ISNULL([ReceivedAmount], 0) 
                          < 0 THEN /* We bring past due to zero and
    apply rest to current. */ CASE WHEN [pastdue].[PastDueFeeAmount] + ISNULL([ReceivedAmount], 0) 
                          < 0 THEN - ([pastdue].[PastDueFeeAmount]
    + ISNULL([ReceivedAmount], 0)) ELSE 0 END WHEN ISNULL([ReceivedAmount], 0) = 0 AND 
                          [pastdue].[PastDueFeeAmount] < 0 THEN - [pastdue].[PastDueFeeAmount]
    ELSE 0 END, [AmountDue] = [unpaid].[UnpaidFeeAmount], [ID] = [iff].[FacilityFeeID]
    FROM         [dbo].[INV_SubInvoice] isi JOIN
                          [dbo].[INV_Invoice] ii ON [isi].[InvoiceID]
    = [ii].[ID] JOIN
                          [dbo].[INV_Facility] [if] ON [isi].[ID] = [if].[SubInvoiceID]
    JOIN
                          [dbo].[INV_FacilityFee] iff ON [if].[ID] = [iff].[INV_FacilityID]
    JOIN
                              (SELECT     [sis_fee].[ID],
    [sis_fee].[SectionTypeCode], [SectionType] = [st_fee].[Name], [sis_fee].[INV_FacilityFeeID]
                                FROM      
       [dbo].[INV_SubInvoiceSection] sis_fee JOIN
                   [dbo].[INV_SectionType] st_fee ON [sis_fee].[SectionTypeCode] = [st_fee].[Code]
                                WHERE      [INV_FacilityFeeID]
    IS NOT NULL AND [StatusCode] = 'BILL') isis_fee ON [iff].[ID] = [isis_fee].[INV_FacilityFeeID] JOIN
                              (SELECT     [iffa].[SectionID],
    [AccrualDeterminationDateMax] = MAX([iffa].[AccrualDeterminationDate]), 
                   [AccrualDeterminationDateMin] = MIN([iffa].[AccrualDeterminationDate]), [CurrentDueAmount] = SUM([iffa].[AccruedFeeAmount]), 
                   [ReceivedAmount] = SUM([iffa].[ReceivedFeeAmount])
                                FROM      
       [dbo].[INV_FacilityFeeAccrual] iffa
                                GROUP BY [iffa].[SectionID])
    dates ON [isis_fee].[ID] = [dates].[SectionID] LEFT JOIN
                              (SELECT     *
                                FROM      
       [dbo].[INV_FacilityFeeAccrual]) unpaid ON [dates].[SectionID] = [unpaid].[SectionID] AND 
                          [dates].[AccrualDeterminationDateMax] = [unpaid].[AccrualDeterminationDate]
    LEFT JOIN
                              (SELECT     [SectionID],
    [PastDueFeeAmount] = SUM([PastDueFeeAmount])
                                FROM      
       [dbo].[INV_FacilityFeeAccrual]
                                GROUP BY [SectionID]) pastdue
    ON [dates].[SectionID] = [pastdue].[SectionID]
    UNION
    SELECT     [isi].[InvoiceID], [ii].[DueDate], [SubInvoiceID] = [isi].[ID], [INV_FacilityID] = [if].[ID], [if].[FacilityID],
    [FacilityFeeID] = NULL, [il].[LoanID], [isi].[PortfolioID], [isi].[Portfolio], 
                          [PaymentType] = [isis_loan].[SectionType], [Name]
    = [il].[Name], [ReceivedAmount], [CurrentDueAmount], [PastDueAmount] = CASE WHEN ISNULL([ReceivedAmount], 
                          0) > 0 THEN [PastDueAmount] + ISNULL([ReceivedAmount],
    0) WHEN ISNULL([ReceivedAmount], 0) 
                          < 0 THEN /* We bring past due to zero and
    apply rest to current. */ CASE WHEN [PastDueAmount] + ISNULL([ReceivedAmount], 0) 
                          < 0 THEN 0 ELSE [PastDueAmount] + ISNULL([ReceivedAmount],
    0) END WHEN ISNULL([ReceivedAmount], 0) = 0 AND 
                          [PastDueAmount] < 0 THEN 0 ELSE [PastDueAmount]
    END, 
                          [PaidAmount] = CASE WHEN [isis_loan].[SectionTypeCode]
    = 'LOAN_PRIN' THEN 0 ELSE CASE WHEN ISNULL([ReceivedAmount], 0) 
                          < 0 THEN /* We bring past due to zero and
    apply rest to current. */ CASE WHEN [PastDueAmount] + ISNULL([ReceivedAmount], 0) 
                          < 0 THEN - ([PastDueAmount] + ISNULL([ReceivedAmount],
    0)) ELSE 0 END WHEN ISNULL([ReceivedAmount], 0) = 0 AND 
                          [PastDueAmount] < 0 THEN - [PastDueAmount]
    ELSE 0 END END, 
                          [AmountDue] = CASE WHEN [isis_loan].[SectionTypeCode]
    = 'LOAN_PRIN' THEN [CurrentDueAmount] ELSE [unpaid].[AmountDue] END, [ID] = [il].[LoanID]
    FROM         [dbo].[INV_SubInvoice] isi JOIN
                          [dbo].[INV_Invoice] ii ON [isi].[InvoiceID]
    = [ii].[ID] JOIN
                          [dbo].[INV_Facility] [if] ON [isi].[ID] = [if].[SubInvoiceID]
    JOIN
                          [dbo].[INV_Loan] il ON [if].[ID] = [il].[INV_FacilityID]
    JOIN
                              (SELECT     [sis_loan].[ID],
    [sis_loan].[SectionTypeCode], [SectionType] = [st_loan].[Name], [sis_loan].[INV_LoanID]
                                FROM      
       [dbo].[INV_SubInvoiceSection] sis_loan JOIN
                   [dbo].[INV_SectionType] st_loan ON [sis_loan].[SectionTypeCode] = [st_loan].[Code]
                                WHERE      [INV_LoanID]
    IS NOT NULL AND [StatusCode] = 'BILL') isis_loan ON [il].[ID] = [isis_loan].[INV_LoanID] JOIN
                              (SELECT     [iffa].[SectionID],
    [AccrualDeterminationDateMax] = MAX([iffa].[AccrualDeterminationDate]), 
                   [AccrualDeterminationDateMin] = MIN([iffa].[AccrualDeterminationDate]), [CurrentDueAmount] = SUM([iffa].[ExpectedPrincipalAmount]), 
                   [ReceivedAmount] = SUM([ReceivedPrincipalAmount])
                                FROM      
       [dbo].[INV_LoanPrincipalAmortization] iffa
                                GROUP BY [iffa].[SectionID]
                                UNION
                                SELECT     [iffa].[SectionID],
    [AccrualDeterminationDateMax] = MAX([iffa].[AccrualDeterminationDate]), 
                  [AccrualDeterminationDateMin] = MIN([iffa].[AccrualDeterminationDate]), [CurrentDueAmount] = SUM([iffa].[AccruedInterestAmount]), 
                  [ReceivedAmount] = SUM([ReceivedInterestAmount])
                                FROM      
      [dbo].[INV_LoanCashInterestAccrual] iffa
                                GROUP BY [iffa].[SectionID]
                                UNION
                                SELECT     [iffa].[SectionID],
    [AccrualDeterminationDateMax] = MAX([iffa].[AccrualDeterminationDate]), 
                  [AccrualDeterminationDateMin] = MIN([iffa].[AccrualDeterminationDate]), [CurrentDueAmount] = SUM([iffa].[AccruedInterestAmount]), 
                  [ReceivedAmount] = SUM([ReceivedInterestAmount])
                                FROM      
      [dbo].[INV_LoanPIKInterestAccrual] iffa
                                GROUP BY [iffa].[SectionID])
    dates ON [isis_loan].[ID] = [dates].[SectionID] LEFT JOIN
                              (SELECT     [AmountDue]
    = [UnpaidPrincipalAmount], [SectionID], [AccrualDeterminationDate]
                                FROM      
       [dbo].[INV_LoanPrincipalAmortization]
                                UNION
                                SELECT     [AmountDue]
    = [UnpaidInterestAmount], [SectionID], [AccrualDeterminationDate]
                                FROM      
      [dbo].[INV_LoanCashInterestAccrual]
                                UNION
                                SELECT     [AmountDue]
    = [UnpaidInterestAmount], [SectionID], [AccrualDeterminationDate]
                                FROM      
      [dbo].[INV_LoanPIKInterestAccrual]) unpaid ON [dates].[SectionID] = [unpaid].[SectionID] AND 
                          [dates].[AccrualDeterminationDateMax] = [unpaid].[AccrualDeterminationDate]
    LEFT JOIN
                              (SELECT     [PastDueAmount]
    = SUM([PastDuePrincipalAmount]), [SectionID]
                                FROM      
       [dbo].[INV_LoanPrincipalAmortization]
                                GROUP BY [SectionID]
                                UNION
                                SELECT     [PastDueAmount]
    = SUM([PastDueInterestAmount]), [SectionID]
                                FROM      
      [dbo].[INV_LoanCashInterestAccrual]
                                GROUP BY [SectionID]
                                UNION
                                SELECT     [PastDueAmount]
    = SUM([PastDueInterestAmount]), [SectionID]
                                FROM      
      [dbo].[INV_LoanPIKInterestAccrual]
                                GROUP BY [SectionID]) pastdue
    ON [dates].[SectionID] = [pastdue].[SectionID]
    UNION
    SELECT     [isi].[InvoiceID], [ii].[DueDate], [SubInvoiceID] = [isi].[ID], [INV_FacilityID] = [if].[ID], [if].[FacilityID],
    [FacilityFeeID] = NULL, [il].[LoanID], [isi].[PortfolioID], [isi].[Portfolio], 
                          [PaymentType] = 'PIK Interest Applied', [Name]
    = [il].[Name], [ReceivedAmount], [CurrentDueAmount] = - [dates].[CurrentDueAmount], 
                          [PastDueAmount] = - CASE WHEN ISNULL([ReceivedAmount],
    0) > 0 THEN [PastDueAmount] + ISNULL([ReceivedAmount], 0) WHEN ISNULL([ReceivedAmount], 0) 
                          < 0 THEN /* We bring past due to zero and
    apply rest to current. */ CASE WHEN [PastDueAmount] + ISNULL([ReceivedAmount], 0) 
                          < 0 THEN 0 ELSE [PastDueAmount] + ISNULL([ReceivedAmount],
    0) END WHEN ISNULL([ReceivedAmount], 0) = 0 AND 
                          [PastDueAmount] < 0 THEN 0 ELSE [PastDueAmount]
    END, [PaidAmount] = - CASE WHEN ISNULL([ReceivedAmount], 0) 
                          < 0 THEN /* We bring past due to zero and
    apply rest to current. */ CASE WHEN [PastDueAmount] + ISNULL([ReceivedAmount], 0) 
                          < 0 THEN - ([PastDueAmount] + ISNULL([ReceivedAmount],
    0)) ELSE 0 END WHEN ISNULL([ReceivedAmount], 0) = 0 AND 
                          [PastDueAmount] < 0 THEN - [PastDueAmount]
    ELSE 0 END, [AmountDue] = - [AmountDue], [ID] = [il].[LoanID]
    FROM         [dbo].[INV_SubInvoice] isi JOIN
                          [dbo].[INV_Invoice] ii ON [isi].[InvoiceID]
    = [ii].[ID] JOIN
                          [dbo].[INV_Facility] [if] ON [isi].[ID] = [if].[SubInvoiceID]
    JOIN
                          [dbo].[INV_Loan] il ON [if].[ID] = [il].[INV_FacilityID]
    JOIN
                              (SELECT     [sis_loan].[ID],
    [sis_loan].[SectionTypeCode], [SectionType] = [st_loan].[Name], [sis_loan].[INV_LoanID]
                                FROM      
       [dbo].[INV_SubInvoiceSection] sis_loan JOIN
                   [dbo].[INV_SectionType] st_loan ON [sis_loan].[SectionTypeCode] = [st_loan].[Code]
                                WHERE      [INV_LoanID]
    IS NOT NULL AND [StatusCode] = 'BILL' AND [sis_loan].[SectionTypeCode] = 'LOAN_INT_PIK') isis_loan ON 
                          [il].[ID] = [isis_loan].[INV_LoanID] JOIN
                              (SELECT     [iffa].[SectionID],
    [AccrualDeterminationDateMax] = MAX([iffa].[AccrualDeterminationDate]), 
                   [AccrualDeterminationDateMin] = MIN([iffa].[AccrualDeterminationDate]), [CurrentDueAmount] = SUM([iffa].[AccruedInterestAmount]), 
                   [ReceivedAmount] = SUM([ReceivedInterestAmount])
                                FROM      
       [dbo].[INV_LoanPIKInterestAccrual] iffa
                                GROUP BY [iffa].[SectionID])
    dates ON [isis_loan].[ID] = [dates].[SectionID] LEFT JOIN
                              (SELECT     [AmountDue]
    = [UnpaidInterestAmount], [SectionID], [AccrualDeterminationDate]
                                FROM      
       [dbo].[INV_LoanPIKInterestAccrual]) unpaid ON [dates].[SectionID] = [unpaid].[SectionID] AND 
                          [dates].[AccrualDeterminationDateMax] = [unpaid].[AccrualDeterminationDate]
    LEFT JOIN
                              (SELECT     [PastDueAmount]
    = SUM([PastDueInterestAmount]), [SectionID]
                                FROM      
       [dbo].[INV_LoanPIKInterestAccrual]
                                GROUP BY [SectionID]) pastdue
    ON [dates].[SectionID] = [pastdue].[SectionID]

  • CSS Layout issue!! Help Urgent!!

    I am having a problem with creating a css layout, in the past i used tables and am trying to convert my sites for my customers. I have layed out the website using divs and css and it looks great until i put in the cosing of the menu bar. when i put in the coding for the menu bar suddenly the bar has a padding around it but i cannot find a padding that would change this in the css coding. I need this done asap! so please help. ill show my coding below:
    this is the div coding:
    <div id=Nav>
       <ul class="dropdown" id="Bar"; width: 879px" name="Bar">
             <li class="style16" style="width: 161px; height: 22px">
       <a href="default.html" style="width: 146px">Home</a></li>
             <li class="style10" style="width: 169px; height: 23px">
       <a href="about.html" style="width: 153px">About</a></li>
         <li class="" style="height: 31px; width: 175px; left: 0px; top: 0px">
       <a href="Equipment.html" class="style18">
       <div class="style10" style="width: 156px; height: 20px;">
        Equipment</div>
       </a> <ul class="sub_menu">
                <li><a href="compressor.html">Air Compressors</a></li>
                <li><a href="compactions.html">Compaction</a></li>                            
                <li><a href="concrete.html">Concrete Equipment</a></li>
                <li><a href="forklifts.html">Fork Lifts</a></li>
                <li><a href="generators.html">Generators</a></li>                            
                <li><a href="groundthawing.html">Ground Thawing</a></li>
                <li><a href="heaters.html">Heaters</a></li>
                <li><a href="scissorlifts.html">Scissor Lifts</a></li>                            
                <li><a href="boomlifts.html">Boom Lifts</a></li>
                <li><a href="lighttowes.html">Light Towers</a></li>
                <li><a href="misc.html">Misc.</a></li>                            
                <li><a href="dirtequipment.html">Dirt Equipment</a></li>
                <li><a href="powertools.html">Power Tools</a></li>
                <li><a href="pumps.html">Pumps | Saws | Welders</a></li>                              
                     </ul>
             </li>
             <li style="width: 165px"><a href="locations.html">
       <div class="style10" style="width: 154px">
        Locations</div>
       </a>
               </li>
                 <li style="width: 180px"><a href="contact.html">
       <div class="style16" style="height: 24px">
        Contact Us</div>
       </a>         </li>
            </ul>
      </div>
    This is the css coding:
    #wrapper {
    width: 880px;
    margin-right: auto;
    margin-left: auto;
    background-color: #f4f4f4;
    #Navigation {
    background-image: url(Images/NAvigation%20BAr.jpg);
    background-repeat: no-repeat;
    width: 880px;
    visibility: visible;
    height: 3-px;
    vertical-align: top;
    Nav {
    vertical-align: top;
    margin: 0px;
    padding: 0px;
    clear: both;
    height: 20px !important;
    #wrapper1 {
    width: 876px;
    margin-right: auto;
    margin-left: auto;
    color: #F4F4F4;
    /* IE10 Consumer Preview */
    background-image: -ms-linear-gradient(left, #716375 0%, #E8E8E8 100%);
    /* Mozilla Firefox */
    background-image: -moz-linear-gradient(left, #716375 0%, #E8E8E8 100%);
    /* Opera */
    background-image: -o-linear-gradient(left, #716375 0%, #E8E8E8 100%);
    /* Webkit (Safari/Chrome 10) */
    background-image: -webkit-gradient(linear, left top, right top, color-stop(0, #716375), color-stop(1, #E8E8E8));
    /* Webkit (Chrome 11+) */
    background-image: -webkit-linear-gradient(left, #716375 0%, #E8E8E8 100%);
    /* W3C Markup, IE10 Release Preview */
    background-image: linear-gradient(to right, #716375 0%, #E8E8E8 100%);
    margin-bottom: auto;
    #Bar {
    background-repeat: no-repeat;
    width: 880px;
    height: 28pt;
    overflow: visible;
    background-image: url(Images/NAvigation%20BAr.jpg);
    position: relative;
    vertical-align: top;
    #container {
    width: 880px;
    color: #000;
    background-color: #EDEDED;
    dominant-baseline: 578px;
    /* IE10 Consumer Preview */
    background-image: -ms-linear-gradient(left, #716375 0%, #E8E8E8 100%);
    /* Mozilla Firefox */
    background-image: -moz-linear-gradient(left, #716375 0%, #E8E8E8 100%);
    /* Opera */
    background-image: -o-linear-gradient(left, #716375 0%, #E8E8E8 100%);
    /* Webkit (Safari/Chrome 10) */
    background-image: -webkit-gradient(linear, left top, right top, color-stop(0, #716375), color-stop(1, #E8E8E8));
    /* Webkit (Chrome 11+) */
    background-image: -webkit-linear-gradient(left, #716375 0%, #E8E8E8 100%);
    /* W3C Markup, IE10 Release Preview */
    background-image: linear-gradient(to right, #716375 0%, #E8E8E8 100%);
    margin-bottom: auto;
    #content {
    float: left;
    color: #090;
    width: 580px;
    padding-right: 6px;
    background-color: #033;
    margin-top: 20px;
    .container {
    color: #000;
    background-color: #ff6;
    width: 876px;
    #expect {
    height: 164px;
    width: 294px;
    float: right;
    position: relative;
    background-color: #C90;
    margin-left: 582px;
    padding-top: 10px;
    #hours {
    float: left;
    height: 55px;
    width: 294px;
    line-height: 4px;
    word-spacing: normal;
    white-space: normal;
    display: inline;
    letter-spacing: normal;
    padding-top: 10px;
    font-size: 13pt;
    color: #000;
    margin-left: 586px;
    background-color: #F99;
    #footer {
    height: 76px;
    width: 880px;
    background-color: #CC0;
    clear: both;
    #cards {
    float: right;
    height: 31px;
    width: 294px;
    margin-left: 582px;
    padding-top: 10px;
    background-color: #F36;
    #contact {
    float: left;
    height: 328px;
    width: 293px;
    word-spacing: normal;
    white-space: normal;
    line-height: 1px;
    color: #000;
    display: inline;
    font-size: 14pt;
    background-color: #FFF;
    padding-top: 10px;
    margin-top: 20px;
    #header {
    background-image: url(Images/Proquip%20Logo/Proquip%20logo2.jpg);
    background-repeat: no-repeat;
    background-position: center center;
    width: 885px;
    height: 126px;
    background-color: #000;
    margin-right: 2.5px;
    margin-left: 0px;
    #wrapper #container #contact p strong {
    color: #800000;
    font-size: 14pt;
    #wrapper #container #contact blockquote p a {
    color: #000;
    #wrapper #container #expect div {
    color: #900;
    font-size: 14pt;
    font-weight: bold;
    #wrapper #container #hours div {
    color: #900;
    font-size: 14pt;
    font-weight: bold;
    #box2 {
    background-image: url(Images/Option%201/Services/whitebox2.jpg);
    #box3 {
    background-image:url(Images/Option%201/Services/redbox2.jpg);
    background-repeat:no-repeat;
    background-position: center center;
    #gold {
    background-image:url(Images/Option%201/Logos/gold.gif);
    background-repeat:no-repeat;
    #white {
    background-image:url(Images/Option%201/ProQuip-Pics/box1.gif);
    background-repeat:no repeat;
    #forklift {
    background-image:url(Images/Option%201/ProQuip-Pics/34-01-4380.jpg);
    background-repeat:no-repeat;
    #scissorlift {
    background-image:url(Images/Option%201/ProQuip-Pics/jlg-scissor-lifts-21.jpg);
    background-repeat:no-repeat;
    /* Navigation Menu- Level one */
    ul {
    list-style: none
    ul.dropdown {
    font-size: 13pt;
    color: #000000;
    height: 25px;
    text-decoration: none !important;
    width: 860px;
    position: relative;
    vertical-align: top;
    ul#Bar.dropdown {
    width: 878px;
    position: relative;
    vertical-align: top;
    ul.dropdown li {
    font-weight: 600;
    float: left;
    zoom: 1;
    font-family: Arial, Helvetica, sans-serif;
    font-size: 13pt;
    display: block;
    width: 175px;
    color: #000000;
    top: 25px;
    text-decoration: none !important;
    text-align: center;
    ul.dropdown a:hover {
    color:#cc0000;
    ul.dropdown a:active {
    color: #000000;
    ul.dropdown li a {
    display: block;
    border-right: 1px solid#333;
    color: #000000;
    border-right-width: 1px;
    text-decoration: none !important;
    text-align: center;
    ul.dropdown li:last-child a {
    border-right:none; /* does not wotk in IE */
    text-decoration:none !important; } 
    ul.dropdown li.hover,
    ul.dropdown li.hover {
    color: #000000;
    position: relative;
    height: 28px;
    top: 0px;
    ul.dropdown li.hover a {
    color:#800000;
    /* Level Two Navigation */
    ul.dropdown ul {
    width: 180px;
    visibility: hidden;
    position: absolute;
    top: 100%;
    left: 36%;
    display: block;
    float: left;
    color: #000000;
    text-decoration: none !important;
    height: 25px;
    ul.dropdown ul li {
    font-weight: normal;
    color: #000000;
    border-bottom: 1px solid #ccc;
    float: left;
    border-bottom-color: #c0c0c0;
    border-bottom-style: groove;
    display: block;
    background-color: #dbdbdb;
    text-decoration:none !important;
    /* IE 6&7 needs inline block */
    ul.dropdown ul li a {
    border-right: none;
    display: inline-block;
    height: 18px;
    line-height: 16px;
    color: #000000;
    width: 100%;
    text-decoration: none !important;
    /* Level Three Navigation */
    ul.dropdown ul ul {
    top: 100%;
    color: #000000;
    text-decoration: none !important;
    ul.dropdown li:hover>ul {
    visibility: visible;
    color: #000000;
    top: 30px;
    text-decoration: none !important;

    I have the site using tables up and running, this is a website for a client so I cant make a test site using that domain would it be ok if I screen shot'ed the problem?
    Date: Thu, 24 Apr 2014 12:19:44 -0700
    From: [email protected]
    To: [email protected]
    Subject: CSS Layout issue!! Help Urgent!!
        Re: CSS Layout issue!! Help Urgent!!
        created by Jon Fritz II in Dreamweaver support forum - View the full discussion
    Well, you're not using position:absolute, so you've got a big thumbs up from a bunch of us for that.
    Is there any chance you could post a link to this page on your server? It's much easier to troubleshoot from a browser than it is to rebuild the page from code fragments.
    If you haven't gone live with the page yet, create a folder called TEST in your site and save copies of the page and css there. Upload TEST and post a link to it here. Once the problem is found/fixed, delete TEST from the server.
    You can also attempt to use Firefox or Chrome to find your issue by right clicking > Inspect Element. All CSS that affects a given element will be displayed with file name and line numbers there.
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6327947#6327947
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6327947#6327947
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6327947#6327947. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Dreamweaver support forum at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Maybe you are looking for

  • Report from SAP Quickviewer code

    Hi, I have been given a code generated by SAP Quickviewer (transaction SQVI). The client expects me to design an ABAP Report using this code as a guideline. Is this practically possible. I don't even have access to the name of the quickview. No tech

  • File - XI -WebService Scenario Question

    XI is using Receiver SOAP Adapter to trigger webservice. This scenario is executed every 15 mins. Webservice admin saying that there are 10 to 15 Xi user Ids at any given point time in the receiving server. Why does the User Id stays active even afte

  • About Mono/Stereo working with Logic 9

    Hello guys, I´m new member here... I hope to share here with you great audio experiences. Sure... i´m new Logic 9 pro user too. So i have no much idea about some things. As I could see in other discussions, we have great geniuses of the audio here an

  • Logos in email signatures - JPG or PNG format?

    Personally I don't see a need to have a logo in your signature. Comes across differently based on the email client or provider.

  • Can't open submenus on web pages

    On some web pages I can't open sub menu on menu item selected. TD Waterhouse web pages do not work properly.