Help! When I select "Phone" it tries to open and gives me a white screen and closes. I cannot view my missed calls or voicemails.
If anyone knows anything about this...
When I select "Phone" on my home screen the iPhone attempts to open it, brings up a white screen and then will shut back down. I have 8 missed calls or voicemails yesterday and I couldn't check any of them. Does this happen to anyone else?
Also, when I receive a call and I answer it does not give me the ability to end call or any of my options (sources, keypad,etc.) during the call.
Basically, I can't do anything with my contacts, favorites, missed calls or voicemails.
Can someone please help?
I have tried that multiple times. I have also made sure that I have the latest updates. Would haveing 27,000+ contacts have anything to do with it?
Sometimes it works and sometimes it doesn't
Similar Messages
-
My iPhone camera will not open up. When I press on the icon it open and closes quickly. When I open it from my home screen it reboots my phone. What should I do?
Tried that and it still isn't working. Not sure if it's software thing but I just noticed when I swipe up my control center the flashlight option is not available as well. I'm not sure why this is. I have a 5s with the newest software. That's for the suggestion
-
Email not opening on my iPad2 This is a sudden thing, email had been working fine since purchasing the device then today would not stay open, now it will not open at all. After trying to open mail I receive a white screen for a nano second and the app closes.
Have you tried closing the Mail app completely ? From the home screen (i.e. not with Mail 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
I just got my iphone 5C on Wednesday, I was slow to move my apps over because well I loved my iphone3. Never had any problems!
I finally moved my apps over last night and was prompted to upgrade to 7.1. I upgraded, then received a voicemail, listened to part of the voicemail (the phone dropped the call) and went back to the main screen.
Then nothing worked. I try to open the phone icon and it tried to open but it returned to the main screen. I tried opening anything else and nothing will work. Not even the phone icon. It also would not shut down.
I let it sit for twenty minutes and tried to turn it off. Then ten minutes later it just rebooted itself. Waited until it came back up and tried to open settings, photo, camera, phone nothing will open.
I know the touch is still working because it is locked and it will allow me to unlock it every time. So I guess something is working.
Any suggestions?Finally got my phone to power off. I was able to reset the phone and everything is now working. I guess I just needed patience!
-
When I have more than one window open and close one firefox crashes
Closing any open window causes Firefox to crash.
Could be caused by Norton Confidential if you have crash report that involve coFFPlgn.dll.
If you have submitted crash reports then please post the IDs of one or more crash reports that have this format:
*bp-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
You can find the IDs of the submitted crash reports on the <i>about:crashes</i> page.
*You can open the <b>about:crashes</b> page via the location bar, like you open a website.
See:
*http://kb.mozillazine.org/Mozilla_Crash_Reporter
*https://support.mozilla.org/kb/Mozilla+Crash+Reporter
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode -
When I select a photo on my iPhone and send it via email, the receipient receives it sideways. Any way to fix that?
When you took this photograph your phone was being held in that way. Sideways, try taking the photo straight on. Or it is the Picture file itself, open up the application you edit photos with and rotate it to be proper orientation. I recently had the same problem but you either have to retake or edit it at this point.
-
Running 10.6.8. Trying to open and view contents of a CD (of an MRI) and getting message 'This program cannot be run in DOS mode' Is there a way? Thanks for the help.
Go to the support site for the provider of the MRI software.
Sounds like it windows/PC. I have ran across that for the CDs that veterinarians provide for digital x-rays.
I would try on a PC or on yuur Mac with Windows via BootCamp or a virtual machine like VirtualBox -
my phone is in some mode where it will say everything i am trying to open and i have to double tap on it to open and wont scroll. whats wrong?
You are in VoiceOver mode, you need to go into your settings>general>accessibility and turn off VoiceOver.
-
will my voice mails be lost if my phone froze trying to update itunes? I have the screen with the USB and the itunes circle. phone completely dysfunctional.
as ar as I know, voicemails aren't stored on your iPhone, your carrier saves them.
To solve the problem you're having, use this: http://support.apple.com/kb/HT1808
Using his article will erase everything on the device, so make sure you have a backup!
Good luck
Message was edited by: jesterwylde -
I have set up iPhoto 11 so that pictures will be edited in Photoshop elements 11. I selected the option to edit in another application. But when I select edit in iPhoto, elements opens but the photo does not open in elements. I'm using a Macbook pro 15 inch with retina display with OS 10.8.4 What is the problem?
http://barbarabrundage.com/2011/10/05/adobe-hide-and-seek-setting-pse-10-as-exte rnal-editor/
It relates to Elements 10, but it's the same for 11. -
When my phone is not plugged into the charger or computer, it will not turn on at all; even though it is not dead. When it's plugged into the computer, it will go to a white screen with a grey apple icon and then it will turn off again and repeat. IOS7 and iPhone 5.
http://support.apple.com/kb/HT1808
Try this step and if you cannot get your device into recovery mode there is a chance you have a hardware failure and you need to call apple to see what service options you have. -
I want to change my primary e-mail address that I use with Apple ID - help guide says Select Edit next to “Apple ID and Primary Email Address.” But there is no 'edit' on that section there is on every other but not that one. Can anyone help?
You can create an alias @icloud.com email address within your current account that will receive email in your current iCloud inbox (see http://help.apple.com/icloud/#/mm6b1a490a). (@me.com addresses are no longer available as new addresses.) Just be aware that you cannot use an alias address later to create a new iCloud account or move it to a different account.
Also, even if you created a new iCloud account with a new ID, your existing purchases would not be lost. They are permanently tied to the original ID you used to purchase them. You can also continue to use the existing ID for the iTunes store; it does not need to be the same as the ID you use for iCloud. -
I had just updated my Mac to 10.6.1. When it finished, I had tried to open up Itunes but it says it requires 10.6.8 or later. When i had tried to update my mac it asked for my adiminstartor password. I dont know my password. Any way to reset it without using a disc?
Sure there is.
1. restart your computer in Single User Mode (by pressing Command + S during boot - see http://support.apple.com/kb/ht1492)
This will boot your OS X system in a kind of command line mode.
Note: this will not work if you have a Firmware password set.
2. when in Single User Mode, enter the following command
mount -uw /
to mount your OS X file system.
3. now you can enter the following command
passwd username
replacing "username" by your OS X user's short name. Then you will be prompted to enter the new password for that user. You will have to confirm that new password.
Note that you will not see any character showing when you enter the new password; this is expected behaviour. -
When I select a title or lower thirds and try to enter text by double clicking on it I cannot enter any text at all. Also the text area box does not show up at all where you can enter text also.
It's a bit hit and miss, Walter. Sometimes the box to enter text shows up straight away in the inspector under "text". Other times, although you click "text" in the inspector, there's nowhere to actually write anything.... then what you have to do is move the trackbar over the Title Box until you see the text boxes in the main Viewer. In the Viewer, double click a text box.... you can enter text there, but it's a bit flaky, but when you've clicked in it, you'll find that under "Text" in the inspector, the box for inputting text has magically appeared!
I'm not sure if anyone else has this trouble, but it is a bit of a pain! -
Hi yours, and it will be sent to O iphone 5s Mobicom Co.?
I want Mobicom LLC coming by? apple company iphone 5s faster sent to do Mobicom LLC. When Mobicom LLC phone 5s in the next, and it will send you in the gym did Mobicom LLC ready to send. :))What the **** are you on about?
Do you have a proper question to ask? If so ask it in a proper and understandable way.
What you have typed here is just plain gibberish!!
Maybe you are looking for
-
It is possible to have two tables of same name in Oracle !
Oracle Version:10gR2 In MS-Access 2007, I had to use the 'Export' feature by which i copy a table (and its data) to an Oracle Schema via ODBC connection. Later i realised that , when copying tables with a mix of lower and upper case names , the table
-
Error while creating the Unique Index of the Primary Key of an Item
Hi all, I have deployed a new item (CO_CONTRACTUNIT_PRODUCT) in my publication. The deploy appears to be successfull as the item can be seen in the repository through the Mobile Manager. The problem occurs when i sync my local DB to get the item offl
-
Want to change share everything plan, but have a conundrum.
I went into a Verizon store a couple of months ago to buy a smartphone. First time dealing with Verizon so they ask me what I am looking for and what kind of data I want to be allowed. After telling them what I wanted (unlimited talk and text, 1GB of
-
GT70 Dragon edition 2 bluetooth
Hi I bought my laptop 6 months ago .. and the bluetooth was perfectly working then the bluetooth stopped and when I try to turn on the bluetooth from the SCM the mouse stop moving and I have to restart it and I uninstalled the driver and reinstall it
-
Can a cfp-2150 boot without a network connection?
Howdy, I'm trying to use a cFP-2120 to run a PID control loop and collection some data. The system is a remote location served with a wireless network, switch and connected pc's. Our wireless network is down for some upgrades. Can I get the cFP bo