Help: Windows XP on MacBook Pro Boot Camp Partition via Target Disk Mode

Firstly, let me lay out my situation. I have an old MacBook Pro (2,2) with a broken disk drive. It was dropped in its youth and can no longer read from or write to CDs or DVDs of any kind. I have just recently bought a new MacBook Pro to replace it (6,2) and am currently trying to convert the old computer into an XP machine through Boot Camp. I'd like to be able to do so without having to buy an external disk drive.
After a clean install of OS X (10.6.3) onto the old machine, I successfully partition 85GB of space (although I previously attempted the same with a 32GB file system to no avail as well) for XP to be installed upon. Because I cannot boot my XP install disk directly from the broken disk drive, I then close Boot Camp Assistant and shut down the computer. I start it up in Target Disk Mode to be accessed from the new MacBook (6,2).
Once the old MacBook is connected, I insert my XP install disk into the new MacBook (6,2) and boot from the disk. After allowing the XP (Professional) boot to load the install files, I arrow-key down to my 85GB partition (FAT32, named standard as "BOOTCAMP") on the old MacBook (2,2)'s hard drive and select it as the partition I would like to install to. This is where I am directed to a new boot window that tells me in a series of paragraphs that the XP installer cannot reach the selected partition for what seems to be a number of reasons. What it seems to be trying to say to me is that it cannot do a remote install of XP on a Target Disk Mode-connected machine, while not "knowing" that I am trying to do so. It's a similar message to the one that Boot Camp Assistant shows when one tries to create a Boot Camp partition on a machine that is being accessed via Target Disk Mode (Apple puts it much more clearly than Microsoft).
I'd be perfectly content, albiet slightly vexed, to conclude here that it is not possible, shuttle over to the nearest Best Buy, and purchase an external disk drive if it weren't for one thing: I tried the same thing two weeks ago with Ubuntu 10.10 and it installed perfectly on the Boot Camp partition I had created then (I have since wiped all and installed OS X cleanly on the laptop).
Here comes the point/questions:
If the Ubuntu boot disk can access the partition, why can't the XP boot disk?
Is there some way to convince the boot system that the drive is local, rather than being accessed via Target Disk Mode?
Is there an easy solution that doesn't even require that, and will allow me to install to the disk over a firewire connection?
If anyone's knowledgeable and/or brave enough to tackle this one, I'll be eternally grateful. Heck, I'll be grateful if anyone even attempts to tackle it.
Thanks,
-Alec Page

Windows XP will only install from the optical drive. Target Disk Mode does not work with Windows volumes. Windows will not install from any external device.

Similar Messages

Macbook Pro won't mount during target disk mode

I don't know what to do.
I was using Safari today when the whole computer froze. Nothing was responding, so I had to force shut down.
When I went to restart, I got a gray screen with the apple logo and a progress bar; the bar will take a while to fill, then the computer shut down completely. Happens every time now.
I tried booting in safemode and it didn't work; the command prompt details said "Incorrect number of thread records. (4, 29503)" and "Incorrect number of extended attributes (It should be 381007 instead of 381008)"....... What does that mean????
I tried booting the backup drive and running disk utility to diagnose the problem, and it said the disk is unable to be repaired etc.
Now I'm trying to salvage my important files by using the firewire target disk mode with another mac. My macbook pro won't even mount; disk utility said it can't be mounted and is damaged.
Please help--what do I do to save these files???

My workflow was like this:
Partitioned fresh hard drive into 2 partitions: 1 for OS clone, 1 for data recovery
Used Carbon Copy Cloner (an excellent tool) to clone working OS to 1st partition
Attached harddrive to malfunctioning MBA
Held Option on malfunctioning MBA and booted to cloned drive
Once booted, I used old-school Data Rescue II to salvage data from MBA internal drive to my data recovery partition. (Probably need a newer / better data recovery program, as this one changed file names, moved things around, was generally not that awesome...)
Used Disk Util from booted clone to format MBA internal drive.
Used Carbon Copy Cloner to clone to formatted MBA internal drive.
Shut down, disconnected external drive, MBA booted normally.
Think that's everything. I've been touting the excellence of Carbon Copy Cloner for a while now for backups. In my opinion it's much more thorough than Time Machine backups, as you don't need a functioning OS. You can boot to a clone -- time / life saving!

Mac pro boot camp partition cloned to MBP?

i have a 200 GB mac pro boot camp partition with windows 7 on it and between setting it up and getting all my software customized it has been like doing time in a soviet gulag.
if i create a 200 GB partition on my MBP can i clone this from one machine to another?
it would save me a heck of a lot of time and aggravation
TIA
p.s not sure if this makes a difference but my mac pro is a first generation deal that required amy burning a image to disk or something along those lines...

Do you know what I do to get 10.5?
Purchase it if the computer doesn't include it.
Also, I don't understand why the drivers are going to be on older software that doesn't have Boot Camp bundled with it.
The drivers are not on a Mac OS X 10.4 CD or DVD. They are on the Mac OS X 10.5 DVD.
Leopard has Boot Camp bundled with it doesn't it? Isn't part of the deal upgrading and improving the drivers?
Yes.
You say in the above "or use up a Windows installation"
This only applies if the Windows disk or license agreement allows you to create a limited number of installations.
Are you saying here that I could also reformat the drive with XP on it?
You could, but there is little reason to do so.
Do I have to reconfigure my workspaces if I do the second option above?
If you erase the Windows partition, yes.
(30311)

Need Help Installing Snow Leopard onto a blank HD via Target Disk Mode

Hey everyone.
Recently I had the HD on my Black Macbook crash due to a mechanical failure. I have just purchased a new Hard Drive for my Macbook. It is completely blank other than the fact that I connected it to my girlfriend's White Macbook earlier today to create 2 partitions. I have a new copy of Snow Leopard that I want to install on it and was hoping someone could guide me through the process.
What I have with me as of now is:
One Black Macbook (UK bought) w/ Partitioned Blank HD and a non-functional Superdrive
One White Macbook (US bought) running Tiger w/ working Superdrive that mounts the SL DVD
FireWire Cable
New Snow Leopard DVD
My first attempt at this failed. I connected the two Macs with the FW cable and started up the Black Macbook in Target Disk mode. Both my HD partitions showed up on the White Macbook. I inserted the SL DVD into the White Macbook and when it mounted I clicked on install. Of course, now it thinks that I want to install SL on the White Macbook whereas I want to install it on the Black Macbook.
I'm a college student without a working computer and with my finals coming up, I'm in deep trouble. I want to mention that my Black Macbook's Superdrive spits out _everything except for Movie DVDs and My Leopard Startup Disk._ It spins the SL DVD for a few seconds and spits it out as well. I'm wondering whether this might be an issue with the DVD region code on the SL DVD though I don't think that's it. My region code is currently set to Region 1 (US) where I purchased the Snow Leopard DVD off Amazon. I initially thought there was a problem with the DVD and CD lens in the drive and I bought a DVD/CD Lens Cleaner CD but I can't run it because the Superdrive spits that out too. I'm out of warranty on the Black Macbook so fixing the Superdrive is pretty much out of the question. I was under the impression that I would be able to install SL via Target Disk Mode without any hassles but boy was I ever so wrong.
Is there any way that I can do this? I'm hoping someone here can help me out. Please do if you find the time to.

By other computer, do you mean the White Macbook? So I should basically put the SL DVD in the White Macbook, restart with the C key held down? Is that right?
Please pardon me if I'm being stupid.

Scan HP OfficeJet 6600 in Win7 in MacBook Pro Boot Camp

I initially installed my OfficeJet 6600 on my MacBook Pro, but my MBP has a Boot Camp partition where I run Windows 7. I usually print and scan from the Mac side. I can print with no problem when working in Windows, so I never gave any thought to scanning. Today I hit a snag when I tried to scan a document while working in Windows. I started at the printer/scanner and chose "Scan to Computer." The only machine that appeared was my MBP. Do I need to so something special to get Scan to Computer to work with my Win7 partition?

Hi Caesar3,
Welcome to the HP Forums.
I see that you are having some scanning issues.
I suggest that we start off by running the HP Print and Scan Doctor and see if it finds any issues.
Write me back if you have any other questions or concerns.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Brand new Macbook Pro Boot Camp boots to blinking cursor

I have a brand new Macbook pro running Mountain Lion and Boot Camp 5.0. I have made the disk needed for drivers and support and stuff. Installation looks like it was successful. It gets up through making an account and setting up windows update stuff (never gets to the desktop). After that it says preparing desktop followed by logging out followed by shutting down. It then restarts over and over again to a black screen with a blinking cursor. Anyone have any ideas? I have seen stuff about booting to the win7 disk and selecting repair and then command line to repair the boot efi stuff but since it never has a successful boot it never has a build to repair to. I am frustrated after 7 different installs of windows and a lot of time wasted.

I should add that I went as far as downloading a trial of parallels and imported by boot camp partition. It booted fine but when I tried to install the drivers and support files I got a message that said this version of boot camp is not meant for this hardware. I was thinking if it was hanging on something I could boot into it using parallels and fix it. No dice.

Windows Installer Doesn't Recognize BOOT CAMP Partition

Hello,
I need help and cannot find the answer anywhere on the Internet. I created a 15 gig Windows partition through boot camp successfully. My macbook restarted to run windows installer and I got through all of the screens except where it asks which partition I want to install windows on (Only gives the option of C: which is the size of my Mac OSX drive). I didn't want to install over that drive since it'll write over my Leopard OS. Does anyone know why it won't recognize the boot camp partition? I show the partition on my desktop and in my drive directory.
I also am using an old Windows XP CD that I am not sure if it has SP2 on it. I know we NEED SP2 but I'm wondering if the CD might not contain the SP2 then it won't recognize the partition (maybe the reason for needing SP2). I thought that it would still install it just wouldn't work if we updated to SP2... any ideas?!?
Thanks for any help in advance!

You do need SP2 or later, and even then, some discs do what yours did, don't prompt for target partition or give any option, AND auto select the full OS X partition.
Unless you can slipstream a full SP2 I'd shop for an SP3 disc, and make sure you aren't cutting the partition size short (and leaving 20% free on OS X at least afterwards).

Windows installer can't detect boot camp partition

Hello,
I recently bought my first iMac and I am trying to install Windows 8.1 using the Boot Camp Assistant. I have rebooted the Mac into the Windows installer program and made it to the screen titled "Where do you want to install Windows?" However, the Boot Camp partition I thought I created earlier is not showing on the list of available drives. I have tried hitting the Refresh button several times.
Any assistance would be greatly appreciated. Thank you for your help.

I haven't really kept up lately but the only thing I see missing in your information is you didn't say if you had Formatted the Boot Camp partitiion to NTFS. The last I looked into Boot Camp that was one of the mandatory things you had to do in order for the installer to "see" the partition.
You end up formating it twice.
The original format when you make the Windows partition should be "Mac OS Extended (Journaled)" it's done by the Mac (BootCamp) then when your booted from the Windows installer you then have to format it again with the NTFS format. And of course it has to be on an internal drive. And a full install disk not an upgrade disk. Boot Camp 5?
Take a gander at the instructions again and see if you might have missed a step?
Hope it helped, at least I bumped ya up.......

Can a dead MacBook Pro be used as a target disk?

I have a Santa Rosa MacBook Pro, 15 inch display, with 250 GB and nVidia GeForce 8800 GT. A few weeks ago I left it to sleep, and the battery eventually drained (the blinking ceased). Now, if I plug in the charger, the light is always green (so are the little LED lights near the battery panel). If I hit the power on button, it doesn't respond.
I've resetted the PRM, and taken the battery out for 10 minutes and so on but it hasn't helped.
Would this call for a change in battery? I described it to a member of the Apple team at the Apple store (since I didn't have my laptop at the time we went to the mall) and he said it didn't sound good, but that's all he said.
It has once been in repair for a faulty logic board which Apple covered under an extension program, but that was a year and a half ago. Besides that it was working like a dream until this happened.
I have no warranty and I'm especially worried about the data I might lose because the external HD that Time Machine used died a few days ago.
I was thinking of using the MacBook Pro as a Target Disk, and connect it to my working Apple MacBook. But won't the MacBook Pro have to be switched on?
Please help! I would like any suggestions, detailed walkthroughs so I can atleast save my data.
Thanks!

...If I hit the power on button, it doesn't respond...
Yes, the computer must be able to at least turn on in order to work in Target Disk Mode. Your only option would appear to be to remove the drive from the Macbook, then put it into an external case so you could use it as your would any other external drive.
...the external HD that Time Machine used died a few days ago....
Oh dear, Murphy seems to have taken a large interest in you. While it won't help you now, for the future, what I always recommend to my clients is to have "at least 3 copies". Basically, this is the original, one "normal" backup and another backup that's stored offsite in a firesafe. In addition to dead hard drive like you had, offsite is insurance against theft or damage to building and contents. And firesafe for obvious reasons, but that is at your discretion depending on the importance of the data. But even if you don't go offsite, at least manually make another copy of your documents, iTunes Library, iPhoto Library, etc. on to another hard drive, flash drive, CD, DVD, etc.

Access Boot Camp Partition via Fusion or Parallels

I already have a 20gb Vista partition on my Mac is it possible to access that via Fusion or Parallels without rebooting?

I use Fusion with a boot camp partition containing Windows Vista. No issues when running both Leopard and Fusion with Windows.
One thing to note though and that is if you are planning to play Windows based games via Fusion then forget it. It will be very slow and in most cases unplayable due to speed. Now, if you are running productivity software (MS Office for Windows etc) then you will love this convenience.
Axel F.

Running Boot Camp partition via a VM?

Can someone comment on their experiences running Boot Camp through their VM software?
Does it prevent you from booting into the Boot Camp partition?
I know you have to install the tools for your VM onto the Boot Camp partition to keep your activation active? What happens if one uninstalls the VM? Can the tools be uninstalled to and the Boot Camp partition work like normal again?
Most importantly, can running the Boot Camp partition through a VM cause any damage?

It seems to be hanging, it's actually listed as Not Responding by the force quit menu.
Though I did just check the HD in Disk Utility, and it seems like there is a Windows Partition of the correct size, so I am starting to think BCA just crashed after successfully partioning.

Hi i am trying to install windows to my macbook through boot camp and i get this message Can't install the software because it is not currently available from the Software Update server.!!!what can i do???please help me!

Can't install the software because it is not currently available from the Software Update server. this is the message that i get a few days now that i am trying to install windows through boot camp to my macbook!does anybody knows what i can do????

You keep it on the usb stick for after you boot into Windows. From Windows you install the Windows Support software on the stick. Do you realize that you need to buy and install Windows? The Windows Support software you downloaded is only the Windows drivers for your hardware.
Read the Boot Camp installation instructions and help guides located here: http://www.apple.com/support/bootcamp/

MacBook Pro - Boot Camp 5 - Windows 7

I have a Mid 2010 MacBook Pro 13", running Mac OS X 10.8.4, Via Boot Camp 5 I also have Windows 7 64Bit on it. Now re-did it several times to always run into the same issue which; sound is not working and more imprtantly right-click via Trackpad not working. Yes, I installed the drivers provided by Apple but to no avail.
Anybody any ideas ?
Thanks in advance!

Hello,
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 4GB at least, more if you can afford it)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
It's been pulled from the online store, so you have to call Apple to buy it, last I heard, but quick, call before it's gone!
Call Apple 1-800-MY-APPLE
You have to get 10.6.8 first to go even higher to 10.7 or 10.8

MacBook Pro Boot Camp Windows XP-SP3 Win only restarts boot to black screen

i have a new install of 10.6.1 w/boot camp running an sp3 updated xp version. I have completed the same install on a more new MacBook Pro 15" with no issue, however my mbp 2.33Ghz aluminium has restart problems but ONLY when doing a "restart" from the running xp os. again only when i am running from xp alone, and only when doing a restart (which is all the **** time for xp) does my mbp 1st do a normal apple chime and then hang to a black screen.
once i power down, hit the power button and restart, do i get a normal blue/grey screen, apple chime and the option to boot to macos or my windows partition. the same restart when running macos brings the grey/blue screen up right away.
seems to me there must be something off about doing a restart from windows.
has anyone seen this? any recommendations for diagnostics or a solution would be most appreciated!

never mind, i blitzed the xp drive and reinstalled. 3rd times a charm

MacBook Pro Boot Camp Underscan Issue

Hello,
I have a Late 2011 MacBook Pro with an Intel Core i7 2.5GHz processor and AMD Radeon 6770M and Intel HD Graphics 3000 for graphics processing. Right now my issue is that when I boot my MacBook Pro into Windows 7 with Boot Camp I get an underscan issue with an HDMI connection. I have it connected to a Dell S2440L through a DVI to HDMI cable connected to the Apple Mini DisplayPort to DVI adapter. The image on the Dell monitor is that it is surrounded by a black border and I can't find a way to adjust the underscan settings in Windows 7. Does anyone have any ideas? Thanks for helping.

Since Windows uses the 9600M GT the power-draw (wattage) on the battery is alot higher. But even when both OS X and Windows use the same graphic OS X draws less minimum wattage.
XP is a special problem, because the NVidia drivers seem to have a bug that keeps them from clocking down the graphic-card in 2D and make the GPU run at full speed all the time. This does not happen on Vista though.

Help: Windows XP on MacBook Pro Boot Camp Partition via Target Disk Mode

Similar Messages

Maybe you are looking for