Help with 6753 connection error from XP wireless laptop to AX

New to this forum and thanks for the time here.
I have two computers on a Linksys Network. Desktop PC is hardwired to a Linksys Wireless G Router/Access Point, the other laptop PC is wireless via Linsksys G card.
The Desktop can access, update, and stream to the AIrport Express without issue (after some time tinkering with the system).
On the Laptop I can see the Airport Express both in the Admin Utility and in the lower right corner of the iTunes client, but, cannot connect to the AX. The Admin Utility times out providing the 6753 error described in other forums, but, i still cannot solve the issue.
I appreciate any guidance or suggestions.

I have tried both hard and soft resets but no luck
Neither of these tyeps of resets will fully reset the TC back to factory default settings. I suggest that you try a Factory Default Reset as follows:
Pull the power plug from the TC
Wait 15-20 minutes
Hold in the reset button and continue to hold it for another 8-10 seconds while you plug the power back in to the TC
Release the reset button after the hold period and allow 25-30 seconds for the TC to restart and display a slow, blinking amber light
Try AirPort Utillity again to see if that will help
If you try the Factory Default Reset a few tmes and still have no luck, I am afraid that there has been an internal failure on the TC and you will need to contact Apple to discuss your options.

Similar Messages

  • Need help with MySQL connection error _mmServerScripts

    Trying to create insert a recordset I got the message:
    "The files from the _mmServerScripts folder are for the server model PHP-MySQL. You try to connect to a database using a different server model .Please remove this folder outside the Dreamweaver environment on both local and testing machines and try again."
    I've searched the net and have seen this message hunting people since dw8...
    I could not find a "cure".
    Things to notice:
    0 - Yes the whole thing is apache/php/mysql... just DW thinks it's not.
    1 - Both the connection and the Recordset actualy works. I have a whole site based on this connection and the recorsets I've created manualy based on it.
    2 - It does not matter if we erase or not the _mmServerScripts folder the message stands still allover.
    3 - The problem seems to show up when you split servers...
    3.1 - If I test in a WAMP environment where apache and mysql are in the same machine I can use DW to create data objects for me.
    3.2 - If I test in my real test environment which have web server and db server separated from each other then I can't use DW to create data objects, see bindings, behaviours etc... all I get is this message.... while the code itself runs fine anyway.
    Does any one already knows how to work around or fix this?
    Thanks,
    Julio

    Thanks PZ,
    Yes everything is fine with the site definition.
    everything works. I can upload, run, test all ok.
    The only thing that does not work is to insert any sort of data object through DW interface. If I declare my reordsets by hands or even If I use the ones DW created in my local test server all works fine.
    Then if I use the site definition and try to see any bindings or create a recordset or create a new connection using dw... then the messages come up and dw can't go any further in that task.
    By spli servers I mean one phisical linux server with apache/php but without mySQL + one physical Linux server with mySQL but without apache/php.
    So when I use a site definition that points either to a WAMP or LAMP i.e. when everything is in the same machine DW goes happy and does whatever it's asked to do.
    When I try that on the real mccoy environment (with the two separated servers)... It looks like DW gets confused...

  • Every time i try and get on the apps it comes up with server connection error

    every time i try and get on to the apps it keeps comeing up with server  connection error -1

    Hi,
    Please refer the link below to troubleshoot the issue
    http://h30434.www3.hp.com/t5/Printer-Networking-an​d-Wireless/Web-Services-problem-Server-connection-​...
    Although I am an HP employee, I am speaking for myself and not for HP.
    --Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • Please, could you help with The System Error?

    Hi guys,
    Please could someone help me with The system error: The Parameter is incorrect? which appears on the screen when I open Adobe Photoshop?
    It is Starter edition3.0 and so far it worked ok and suddenly this message haunts my screen. If I clic OK, whole application disappears. I tried hundred times and checked it is 5.1.2600 and my notebook has got Windows XP Profesional.
    Any advice hunging around?
    ThaaankxJ

    Thank you mark, I'll try.
    J
    Date: Fri, 18 Mar 2011 17:17:20 -0600
    From: [email protected]
    To: [email protected]
    Subject: Please, could you help with The System Error?
    Hi orion,
    Sorry that was the impression made by the support agent. If the version of the software that you have is 3.0 or 3.2, then the catalog can be upgraded when you run the trial version of Photoshop Elements. Version 8 had no time limitations, not sure if version 9 will timeout after 30 days or not.
    Just install, and when you launch, Elements will automatically convert the catalog to a format that it can read.
    -Mark
    >

  • Need some help with downloading PDF's from the net.

    need some help with downloading PDF's from the net.  Each time I try to click on a link from a website, if it takes me to a new screen to view a pdf, it just comes up as a blank black screen?  any suggestions?

    Back up all data.
    Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
    /Library/Internet Plug-ins
    In the Finder, select
    Go ▹ Go to Folder
    from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
    From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
    The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
    If you still have the issue, repeat with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

  • I need help with this code error "unreachable statement"

    the error_
    F:\Java\Projects\Tools.java:51: unreachable statement <-----------------------------------------------------------------------------------------------------------------THIS
    int index;
    ^
    F:\Java\Projects\Tools.java:71: missing return statement
    }//end delete method
    ^
    F:\Java\Projects\Tools.java:86: missing return statement
    }//end getrecod
    ^
    3 errors
    import java.util.*;
    import javax.swing.*;
    import java.awt.*;
    public class Tools//tool class
    private int numberOfToolItems;
    private ToolItems[] toolArray = new ToolItems[10];
    public Tools()//array of tool
    numberOfToolItems = 0;
    for(int i = 0; i < toolArray.length; i++)//for loop to create the array tools
    toolArray[i] = new ToolItems();
    }//end for loop
    }//end of array of tools
    public int search(int id)//search mehtod
    int index = 0;
    while (index < numberOfToolItems)//while and if loop search
    if(toolArray[index].getID() == id)
    return index;
    else
    index ++;
    }//en while and if loop
    return -1;
    }//end search method
    public int insert(int id, int numberInStock, int quality, double basePrice, String nm)//insert method
    if(numberOfToolItems >= toolArray.length)
    return 0;
    int index;
    index = search(id); <-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------HERE
    if (index == -1)
    toolArray[index].assign(id,numberInStock, quality, basePrice,nm);
    numberInStock ++;
    return 1;
    }//end if index
    }//end if toolitem array
    return -1;
    }//end insert method
    public int delete(/*int id*/)//delete method
    }//end delete method
    public void display()//display method
    for(int i = 0; i < numberOfToolItems; i++)
    //toolArray.display(g,y,x);
    }//end display method
    public String getRecord(int i)//get record method
    // return toolArray[i].getName()+ "ID: "+toolArray[i].getID()
    }//end getrecod
    }//end class
    Edited by: ladsoftware on Oct 9, 2009 6:08 AM
    Edited by: ladsoftware on Oct 9, 2009 6:09 AM
    Edited by: ladsoftware on Oct 9, 2009 6:10 AM
    Edited by: ladsoftware on Oct 9, 2009 6:11 AM

    ladsoftware wrote:
    Subject: Re: I need help with this code error "unreachable statement"
    F:\Java\Projects\Tools.java:51: unreachable statement <-----------------------------------------------------------------------------------------------------------------THIS
    int index;
    ^
    F:\Java\Projects\Tools.java:71: missing return statement
    }//end delete method
    ^
    F:\Java\Projects\Tools.java:86: missing return statement
    }//end getrecod
    ^
    3 errorsThe compiler is telling you exactly what the problems are:
    public int insert(int id, int numberInStock, int quality, double basePrice, String nm)//insert method
    if(numberOfToolItems >= toolArray.length)
    return 0; // <<== HERE you return, so everyting in the if block after this is unreachable
    int index;
    index = search(id);  //< -----------------------------------------------------------------------------------------------------------------HERE
    if (index == -1)
    toolArray[index].assign(id,numberInStock, quality, basePrice,nm);
    numberInStock ++;
    return 1;
    }//end if index
    }//end if toolitem array
    return -1;
    }//end insert method
    public int delete(/*int id*/)//delete method
    // <<== HERE where is the return statement?
    }//end delete method
    public String getRecord(int i)//get record method
    // return toolArray.getName()+ "ID: "+toolArray[i].getID() <<== HERE you commented out the return statement
    }//end getrecod
    }//end class

  • I can connect hardwired but my wireless laptop will not recognize my router wirelessly

    I have the WRT54G and for a while my laptop was working with my router wirelessly.  We then hooked 4 other computers into it.  At that point my laptop could connect to my router wirelessly but i could not get on the internet.  So i went to the website 192.168.1.1 and tryed to change the security settings.  I reset the security settings and now I cannot get on that website anymore.  My laptop doesn't see the wireless signal from the router but it does work hardwired.  anyone have any ideas what i messed up??? oh and by the way i have vista
    Message Edited by   on 07-30-2007 02:36 PM

    did you change the router settings from your wireless laptop ?? its always recommended to change the router settings from the wired computer ...
    also , on the router web interface , try changing the wireless channel - either 1 or 11 , beacon interval - 50 , Fragmentation threshold - 2306 , RTS threshold - 2307

  • I need help moving my Photoshop 7 from my old laptop to my new laptop which is running Windows 7 Enterprise.  I've tried two routes unsuccessfully.  I install the CD, it does not autoplay.  I execute Autoplay.exe at the root directory, I am welcomed, I ch

    I need help moving my Photoshop 7 from my old laptop to my new laptop which is running Windows 7 Enterprise. I’ve tried two routes unsuccessfully. I install the CD, it does not autoplay. I execute Autoplay.exe at the root directory, I am welcomed, I choose English, I accept the EULA, I get the Install/Explore choices window, with the Install button already selected, I click the Photoshop button, the CD spins, and nothing happens.  In the 2nd attempt I execute Setup.exe in the Photoshop directory, and nothing happens at all.  I’m never even offered the opportunity to enter my product code. What should I do?

    There could is likely a compatibility problem between the old software and the newer operating system.

  • Hello  I need your help with installing the flash drive into my laptop

    Hi
    I am Rachel Friedman asking for your help with installing the flashdrive player into my laptop.
    Thanks
    Rachel

    To give you any useful advice, I'm going to need to know more about your computer and browser:
    https://forums.adobe.com/message/5249945#5249945

  • Help with HP Laser CM1415fnw wired and wireless setup

    Hello all,
    I am have have trouble with both wired and wireless. It will only let me do one or the other. Is there a way i can do both?
    everything works if i am wired or wireless but, the user wants to be able to use both.
    Any help would be great.
    This question was solved.
    View Solution.

    Sorry, both cannot be enabled by design.  That said, devices on a network do not care how others are connected.  You can print from a wireless connection to a wired (Ethernet) printer and v/v.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • ORA-12154 Connection error from HFM to Oracle Database

    Hi,
    I am trying to configure Hyperion HFM but can write to HFM database.
    The implementation architecture:
    Hyperion 11.1.2.2 (with all the requiered patches for HFM, FDM, Shared Services, Workspace and Oracle Application Development)
    Server 1:
    Windows Server 2008 x64
    Installed products: Foundation (EPMA, CalcManager), BI, HFM web components and ADM driver
    Configured products: Foundation(EPMA, CalcManager), BI.
    Database Client: 11gR2 x64
    Server 2:
    Windows Server 2008 x64
    Installed products: HFM, FDQM
    Configured Products: FDQM, HFM
    Database Client: 11gR2 x32, 11gR2 x64 (x32 version installed first)
    Server 3:
    Database: Oracle 11.2.0.2
    All the products from server 1 are working fine, FDQM (server 2) is also working fine, but, when I try to do any action related with HFM database the system fails.
    I have tested the connection is these scenarios:
    1. SQLdeveloper: successfull!, I can create tables, views, etc. Double checking the user privileges it has all the required.
    2. tnsping: successfull!
    3. HFMApplicationCopy utility: Successfull using UDL file and writing the connection parameters.
    4. EPM System Configurator: the configurator successfully validates the database connection information, but does not create the tables on the database. No errors in the configtool log.
    5. EPM Diagnostic Tool: fails with this error message:
    ------------STARTING VALIDATION SCRIPTS----------
    LOGGING IN HFM....
    CREATING APPLICATION....
    ERROR: Unable to CreateApplicationCAS
    Number (dec) : -2147215936
    Number (hex) : &H800415C0
    Description  : <?xml version="1.0"?>
    +<EStr><Ref>{DC34A1FD-EE02-4BA6-86C6-6AEB8EF5E5A3}</Ref><AppName/><User/><DBUpdate>1</DBUpdate><ESec><Num>-2147467259</Num><Type>1</Type><DTime>10/19/2012 8:30:52 AM</DTime><Svr><server_name></Svr><File>HfmADOConnection.cpp</File><Line>511</Line><Ver>11.1.2.2.300.3774</Ver><DStr>ORA-12154: TNS:could not resolve the connect identifier specified</DStr></ESec><ESec><Num>-2147215616</Num><Type>1</Type><DTime>10/19/2012 8:30:52 AM</DTime><Svr><server_name></Svr><File>CHsxSQLConnectionPool.cpp</File><Line>585</Line><Ver>11.1.2.2.300.3774</Ver></ESec><ESec><Num>-2147215936</Num><Type>0</Type><DTime>10/19/2012 8:30:52 AM</DTime><Svr><server_name></Svr><File>CHsxServerImpl.cpp</File><Line>8792</Line><Ver>11.1.2.2.300.3774</Ver></ESec><ESec><Num>-2147215936</Num><Type>0</Type><DTime>10/19/2012 8:30:52 AM</DTime><Svr><server_name></Svr><File>CHsxServer.cpp</File><Line>90</Line><Ver>11.1.2.2.300.3774</Ver></ESec><ESec><Num>-2147215936</Num><Type>1</Type><DTime>10/19/2012 8:30:52 AM</DTime><Svr><server_name></Svr><File>CHsxClient.cpp</File><Line>1356</Line><Ver>11.1.2.2.300.3774</Ver><PSec><Param><server_name></Param></PSec></ESec><ESec><Num>-2147215936</Num><Type>1</Type><DTime>10/19/2012 8:30:52 AM</DTime><Svr><server_name></Svr><File>CHsxClient.cpp</File><Line>936</Line><Ver>11.1.2.2.300.3774</Ver></ESec><ESec><Num>-2147215936</Num><Type>0</Type><DTime>10/19/2012 8:30:52 AM</DTime><Svr><server_name></Svr><File>CHsxClient.cpp</File><Line>4096</Line><Ver>11.1.2.2.300.3774</Ver></ESec></EStr>+
    Source       : Hyperion.HFMErrorHandler.1
    ERROR: while Application created
    7. HFM Classic application creation: fails with the following error:
    Error*11*<user_name+>*10/19/2012 08:30:52*CHsxServer.cpp*Line 90*<?xml version="1.0"?>+
    +<EStr><Ref>{DC34A1FD-EE02-4BA6-86C6-6AEB8EF5E5A3}</Ref><AppName/><User/><DBUpdate>1</DBUpdate><ESec><Num>-2147467259</Num><Type>1</Type><DTime>10/19/2012 8:30:52 AM</DTime><Svr><server_name></Svr><File>HfmADOConnection.cpp</File><Line>511</Line><Ver>11.1.2.2.300.3774</Ver><DStr>ORA-12154: TNS:could not resolve the connect identifier specified</DStr></ESec><ESec><Num>-2147215616</Num><Type>1</Type><DTime>10/19/2012 8:30:52 AM</DTime><Svr><server_name></Svr><File>CHsxSQLConnectionPool.cpp</File><Line>585</Line><Ver>11.1.2.2.300.3774</Ver></ESec><ESec><Num>-2147215936</Num><Type>0</Type><DTime>10/19/2012 8:30:52 AM</DTime><Svr><server_name></Svr><File>CHsxServerImpl.cpp</File><Line>8792</Line><Ver>11.1.2.2.300.3774</Ver></ESec><ESec><Num>-2147215936</Num><Type>0</Type><DTime>10/19/2012 8:30:52 AM</DTime><Svr><server_name></Svr><File>CHsxServer.cpp</File><Line>90</Line><Ver>11.1.2.2.300.3774</Ver></ESec></EStr>+
    8. EPMA Application deployment: fails with same message.
    Please help me with some insights on this problem, I have tried everything but nothing works.
    Regards
    Edited by: Otein on 19-oct-2012 14:04

    Hi,
    I Have solved one of my problems, the one that keep HFM from connecting to the Oracle database.
    I just change the TNSNAMES.ORA, like this:
    Initial tnsnames.ora
    PRUEBA.WORLD=
    +(DESCRIPTION_LIST =+
    +(DESCRIPTION =+
    +(LOAD_BALANACE = ON)+
    +(FAILOVER = ON)+
    +(ADDRESS_LIST =+
    +(ADDRESS = (PROTOCOL = TCP)(HOST = <server_name>)(PORT = <port>))+
    +)+
    +(CONNECT_DATA =+
    +(SERVICE_NAME = <service_name>)+
    +)+
    +)+
    +)+
    Modified tnsnames.ora
    PRUEBA.WORLD=
    +(DESCRIPTION =+
    +(LOAD_BALANACE = ON)+
    +(FAILOVER = ON)+
    +(ADDRESS_LIST =+
    +(ADDRESS = (PROTOCOL = TCP)(HOST = <server_name>)(PORT = <port>))+
    +)+
    +(CONNECT_DATA =+
    +(SERVICE_NAME = <service_name>)+
    +)+
    +)+
    I Just delete the line "+(DESCRIPTION_LIST =+" and its corresponding closing parenthesis, I did this cause in the configuration utility log I saw this line:
    +TNS parsing: Entry: DESCRIPTION_LIST [[Address: Protocol:(TCP) Host:(<server_name>) Port:(1521) SID:(<service_name>)]]+
    So, if the applications were trying to connect to connection descriptor DESCRIPTION_LIST, the driver could not recognize DESCRIPTION_LIST as a valid one.
    There is a lot going on behind the scenes when you work with Oracle Database as the repository, maybe there is some other way to address this issue, but it worked for me, hope it can help you too.

  • Help with "Testing Failed" Error message in iWeb09

    I bought the iLife 09 upgrade purely so I could publish to my own domain server. I have a MobileMe account and iWeb09 publishes fine there--no problems.
    My domain name is hosted on a Windows NT server. The admin is willing to help, but I was hoping someone could point me to documentation for this error:
    "Testing Failed.
    Unable to write to server. Verify your settings and try again."
    If I ftp to the site in a terminal window and do a put, I can write to the site. Obviously, I could at some point, because it servers the "dummy" page I put up, but I tested again in case my permissions had changed.
    I looked at the "Publishing to Windows-based FTP Server" but it does not seem to describe this error.
    BTW, I pay AppleCare for support, but when I tried to get support documentation from them, the tech said they "can't help" with this part of iWeb and hung up on me--the call lasted exactly 90 seconds.
    I am hoping someone out here will know where the errors are documented or will be able to help me figure it out.

    I waded through the posts for iWeb09 and came across a recommendation for Cyberduck (www.cyberduck.ch), so I tried a copy. Works like a champ. Unlike iWeb09, all I had to do was type in my server name, user name, and password to open the connection. Then I published my site to a folder in iWeb and uploaded the folder in Cyberduck. Cyberduck had no problem writing to the server.
    I still would love to know why iWeb can't write to my web server.

  • Im new to this and need help with putting a password on my wireless

    I've had my linksys router for a few years now and recently have been asked to secure it so no one else in the neighborhood can connect to it but me but Ive never known how and I cannot find the installation CD for it.  I have a model number# WRT54G.  I tried searchin the forums but couldn't seem to find one I could understand.  If anyone could please offer me some help on how to simply put a password on it so just my computer and the others in the house can access the wifi thatd be great.  Thanks

    To set up wireless security, you must use a computer that is wired to the router.
    Where to find the router settings: The router's login password is usually on one of the "Administration" pages. The other settings are all found in the "Wireless" or "Wireless Security" section of the router's setup pages, located at 192.168.1.1
    First, give your router a unique SSID. Don't use "linksys".
    Make sure "SSID Broadcast" is set to "enabled".
    Next, leave the router at its default settings (except for the unique SSID), and then use your pc to connect wirelessly to the router. Test your wireless Internet connection and make sure it is working correctly. You must have a properly working wireless connection before setting up wireless security.
    To implement wireless security, you need to do one step at a time, then verify that you can still connect your wireless computer to the router.
    Next, encrypt your wireless system using the highest level of encryption that all of your wireless devices will support. Common encryption methods are:
    WEP - poor (see note below)
    WPA (sometimes called PSK, or WPA with TKIP) - good
    WPA2 (sometimes called PSK2, or WPA with AES) - best
    WPA and WPA2 sometimes come in versions of "personal" and "enterprise". Most home users should use "personal". Also, if you have a choice between AES and TKIP, and your wireless equipment is capable of both, choose AES. With any encryption method, you will need to supply a key (sometimes called a "password" ).
    The wireless devices (computers, printers, etc.) that you have will need to be set up with the SSID, encryption method, and key that matches what you entered in the router.
    Retest your system and verify that your wireless Internet connection is still working correctly.
    And don't forget to give your router a new login password.
    Picking Passwords (keys): You should never use a dictionary word as a password. If you use a dictionary word as a password, even WPA2 can be cracked in a few minutes. When you pick your login password and encryption key (or password or passphrase) you should use a random combination of capital letters, small letters, and numbers, but no spaces. A login password, should be 12 characters or more. WPA and WPA2 passwords should be at least 24 characters. Note: Your key, password, or passphrase must not have any spaces in it.
    Most home users should have their routers set so that "remote management" of the router is disabled. If you must have this option enabled, then your login password must be increased to a minumum of 24 random characters.
    One additional issue is that Windows XP requires a patch to run WPA2.   The patch is located in SP3, so you will need SP3 to run WPA2. 
    Note:
    WEP is no longer recommended. The FBI has demonstrated that WEP can be cracked in just a few minutes using software tools that are readily available over the Internet. Even a long random character password will not protect you with WEP. You should be using WPA or preferably WPA2 encryption.

  • EPrint problem with CP1525nw - connection error

    I just installed a CP1525nw in our home network.  It's wired, and we can print and access the printer's web page from every computer - no problems with local printing.
    However, I'm not able to successfully complete the ePrint setup. When printing the information sheet using the control panel, I quickly get the message "Connection Error, Check Connection", and it asks me to hit 'ok' to return to the main menu.  
    I am able to turn ePrint on and off, as well as enable and disable ePrint, both from the printer's webpage as well as the front LED menu.  Each time I toggle the latter, I get a new email address.  This successfully displays in the printer's LED window, so I know the printer is able to connect to the internet.  
    When I manually go to hp's ePrint website, and try to register my printer using the email address, it fails - unrecognized.
    I'm aware that in order to complete the installation, the information sheet must successfully print.  That seems to be the only thing failing.  Any thoughts?
    Here is some information about the printer and environment:
    - Apple AP Extreme
    - Printer directly wired to AP
    - IP: 10.0.1.17, DNS 10.0.1.1 (router)
    - Firmware: 20101125
    Thanks again.

    Everything is now working just fine.  I wish I could say that I know what changed, but it must be magic.  
    This morning, after letting the ePrint stuff rest for a few days, I removed the service (using the web server), cycled power on the printer, added the ePrint service to the printer, and now everything is just fine.  I'm able to print from our iPad no problem.  
    Seems hp fixed something, just not sure what.

  • [8i] Need help with hierarchical (connect by) query

    First, I'm working in 8i.
    My problem is, I keep getting the error ORA-01437: cannot have join with CONNECT BY.
    And, the reason I get that error is because one of the criteria I need to use to prune some branches with is in another table... Is there anyway to work around this? I tried an in-line view (but got the same error). I thought about using the connect by query as an in-line view and filtering off what I don't want that way, but I'm not sure how to filter out an entire branch...
    Here is some simplified sample data:
    CREATE TABLE     bom_test
    (     parent          CHAR(25)
    ,     component     CHAR(25)
    ,     qty_per          NUMBER(9,5)
    INSERT INTO     bom_test
    VALUES     ('ABC-1','101-34',10);
    INSERT INTO     bom_test
    VALUES     ('ABC-1','A-109-347',2);
    INSERT INTO     bom_test
    VALUES     ('ABC-1','ABC-100G',1);
    INSERT INTO     bom_test
    VALUES     ('ABC-1','1A247G01',2);
    INSERT INTO     bom_test
    VALUES     ('ABC-100G','70052',18);
    INSERT INTO     bom_test
    VALUES     ('ABC-100G','M9532-278',5);
    INSERT INTO     bom_test
    VALUES     ('1A247G01','X525-101',2);
    INSERT INTO     bom_test
    VALUES     ('1A247G01','1062-324',2);
    INSERT INTO     bom_test
    VALUES     ('X525-101','R245-9010',2);
    CREATE TABLE     part_test
    (     part_nbr     CHAR(25)
    ,     part_type     CHAR(1)
    INSERT INTO     part_test
    VALUES     ('ABC-1','M');
    INSERT INTO     part_test
    VALUES     ('101-34','P');
    INSERT INTO     part_test
    VALUES     ('A-109-347','P');
    INSERT INTO     part_test
    VALUES     ('ABC-100G','M');
    INSERT INTO     part_test
    VALUES     ('1A247G01','P');
    INSERT INTO     part_test
    VALUES     ('70052','P');
    INSERT INTO     part_test
    VALUES     ('M9532-278','P');
    INSERT INTO     part_test
    VALUES     ('X525-101','M');
    INSERT INTO     part_test
    VALUES     ('1062-324','P');
    INSERT INTO     part_test
    VALUES     ('R245-9010','P');This is the basic query (with no pruning of branches):
    SELECT     LEVEL
    ,     b.component
    ,     b.parent
    ,     b.qty_per
    FROM     bom_test b
    START WITH          b.parent     = 'ABC-1'
    CONNECT BY PRIOR     b.component     = b.parentThe query above gives the results:
          LEVEL COMPONENT                 PARENT                        QTY_PER
          1.000 101-34                    ABC-1                          10.000
          1.000 A-109-347                 ABC-1                           2.000
          1.000 ABC-100G                  ABC-1                           1.000
          2.000 70052                     ABC-100G                       18.000
          2.000 M9532-278                 ABC-100G                        5.000
          1.000 1A247G01                  ABC-1                           2.000
          2.000 X525-101                  1A247G01                        2.000
          3.000 R245-9010                 X525-101                        2.000
          2.000 1062-324                  1A247G01                        2.000
    9 rows selected....but I only want the branches (children, grandchildren, etc.) of part type 'M'.
    e.g.:
          LEVEL COMPONENT                 PARENT                        QTY_PER
          1.000 101-34                    ABC-1                          10.000
          1.000 A-109-347                 ABC-1                           2.000
          1.000 ABC-100G                  ABC-1                           1.000
          2.000 70052                     ABC-100G                       18.000
          2.000 M9532-278                 ABC-100G                        5.000
          1.000 1A247G01                  ABC-1                           2.000Any suggestions?

    Hi,
    user11033437 wrote:
    First, I'm working in 8i.
    My problem is, I keep getting the error ORA-01437: cannot have join with CONNECT BY.
    And, the reason I get that error is because one of the criteria I need to use to prune some branches with is in another table... Is there anyway to work around this? I tried an in-line view (but got the same error). Post your query. It's very hard to tell what you're doing wrong if we don't know what you're doing.
    ...but I only want the branches (children, grandchildren, etc.) of part type 'M'.
    e.g.:
    LEVEL COMPONENT                 PARENT                        QTY_PER
    1.000 101-34                    ABC-1                          10.000
    1.000 A-109-347                 ABC-1                           2.000
    1.000 ABC-100G                  ABC-1                           1.000
    2.000 70052                     ABC-100G                       18.000
    2.000 M9532-278                 ABC-100G                        5.000
    1.000 1A247G01                  ABC-1                           2.000
    You mean you want don't want the descendants (children, grandchildren, etc.) of any component whose part_type is not 'M'.
    The part_type of the component itself doesn't matter: component '101-34' is included, even though its part_type is 'P', and component 'X525-101' is excluded, even though its part_type is 'M'.
    >
    Any suggestions?Sorry, I don't have an Oracle 8.1 database at hand now. All three of the queries below get the correct results in Oracle 10.2, and I don't believe they do anything that isn't allowed in 8.1.
    You can't do a join and CONNECT BY in the same query on Oracle 8.1.
    I believe you can do one first, then the other, using in-line views. The frist two queries do the join first.
    --     Query 1: Join First
    SELECT     LEVEL
    ,     component
    ,     parent
    ,     qty_per
    FROM     (     -- Begin in-line view to join bom_test and part_test
              SELECT     b.component
              ,     b.parent
              ,     b.qty_per
              ,     p.part_type     AS parent_type
              FROM     bom_test     b
              ,     part_test     p
              WHERE     p.part_nbr     = b.parent
         )     -- End in-line view to join bom_test and part_test
    START WITH     parent     = 'ABC-1'
    CONNECT BY     parent          = PRIOR component
         AND     parent_type     = 'M'
    ;Query 2 is very much like Query 1, but it does more filtering in the sub-query, returning only rows hose part_type or whose parent's part_type is 'M". Your desired result set will be a tree taken entirely from this set. Query 2 may be faster, because the sub-query is more selective, but then again, it may be slower because it has to do an extra join.
    {code}
    -- Query 2: Join first, prune in sub-query
    SELECT     LEVEL
    ,     component
    ,     parent
    ,     qty_per
    FROM     (     -- Begin in-line view to join bom_test and part_test
              SELECT     b.component
              ,     b.parent
              ,     b.qty_per
              ,     p.part_type     AS parent_type
              FROM     bom_test     b
              ,     part_test     p
              ,     part_test     c
              WHERE     p.part_nbr     = b.parent
              AND     c.part_nbr     = b.component
              AND     'M'          IN (c.part_type, p.part_type)
         )     -- End in-line view to join bom_test and part_test
    START WITH     parent     = 'ABC-1'
    CONNECT BY     parent          = PRIOR component
         AND     parent_type     = 'M'
    {code}
    Query 3, below, takes a completely different approach. It does the CONNECT BY query first, then does a join to see what the parent's part_type is. We can easily cut out all the nodes whose parent's part_type is not 'M', but that will leave components like 'R245-9010' whose parent has part_type 'M', but should be excluded because its parent is excluded. To get the correct results, we can do another CONNECT BY query, using the same START WITH and CONNECT BY conditions, but this time only looking at the pruhed results of the first CONNECT BY query.
    {code}
    --     Query 3: CONNECT BY, Prune, CONNECT BY again
    SELECT     LEVEL
    ,     component
    ,     parent
    ,     qty_per
    FROM     (     -- Begin in-line view of 'M' parts in hierarchy
              SELECT     h.component
              ,     h.parent
              ,     h.qty_per
              FROM     (     -- Begin in-line view h, hierarchy from bom_test
                        SELECT     component
                        ,     parent
                        ,     qty_per
                        FROM     bom_test
                        START WITH     parent     = 'ABC-1'
                        CONNECT BY     parent     = PRIOR component
                   ) h     -- End in-line view h, hierarchy from bom_test
              ,     part_test     p
              WHERE     p.part_nbr     = h.parent
              AND     p.part_type     = 'M'
         )     -- End in-line view of 'M' parts in hierarchy
    START WITH     parent     = 'ABC-1'
    CONNECT BY     parent     = PRIOR component
    {code}
    I suspect that Query 3 will be slower than the others, but if the CONNECT BY query is extremely selective, it may be better.
    It would be interesting to see your findings using the full tables. Please post your observations and the explain plan output.
    As usual, your message is a model of completeness and clarity:
    <ul>
    <li>good sample data,
    <li> posted in a way people can use it,
    <li>clear results,
    <li> good explanation
    <li> nciely formatted code
    </ul>
    Keep up the good work!

Maybe you are looking for

  • Refresh a report list after remote function call

    Hi, My customer has a report listing invoices. A non-SAP program calls a remote function creating an invoice with BAPI. My customer wants the list to be refreshed after the invoice is created via RFC or to refresh the list in specified time intervals

  • Missing key in OCR, can't set interfaces with oifcfg

    (also posted in Metalink Unix Installation/OS: RDBMS Technical Forum) I have installed clusterware on a 2 node cluster running RedHat 5. OCR and voting disks are on raw devices, but everthing else is shared using GFS. I can start both nodes but I can

  • Getting 'unidentified error occured' while database connecting on local computer

    I have downloaded CS5 Dreamweaver trial version on my c omputer, with windows 7. I have also downloaded easy php as php-mysql-apache server on the same computer. While creating a databse connection, I get following message 'Undefined error ocurred'.

  • Subject area in RPD  got deleted

    Hi, A subject area in Business layer of RPD got deleted and i have all my joins and logical keys defined. I have a backup of the rpd taken a week back. Can i import the deleted subject area alone from the backup rpd and restore in business layer of t

  • Strange blurry effect - Premiere Pro CS4

    It looks like I'm still far away from a standard, steady and predictable workflow because every now and then something strange occurs and mess up my work. Now I'm dealing with h.264 video. The problem occurs on my output video in a form of messed up