Help with a weird problem

I have a site just taking over and am having an issue figuring out why a Social link will not work. I've examined the code and can't see what is wrong. The site is here
Southern Oregon Music Festival | Tickets
On the home page the social links all work, but on the other pages only the instrument donation link works. The code is inside a div marked social, the links are valid, I validated the code through WW3 and I can't find why the Twitter and Facebook links don't work. When I highlight the code in FF or Chrome and examine it, it looks as if the top two links are wrapped within an h2 tag but they are not, at least not that I can see.
Can anyone help?  

I have sent this code through validator and it comes back clean. There are some deprecated issues but nothing that points to an issue which would cause this to happen. On the home page I had to move the code for H2 tag and the links worked. These are exactly the same on the inside pages. But on the home page there is no h2 tag. 
The H2 tag was below the main paper area, when I moved it out of that area it worked on the home page. Here when I move the <h2> tag to above the main paper area the links start to work. But that breaks the design, throws padding, margins everything off.
I'm trying to figure out why?
Here's the inside page, if I remove the h2 tag to place it above the social div, the links work but it breaks the design. I guess I could redesign but as this is for a nonprofit organization I'm faced with limits to time and money
   <div id="content">
             <div id="top">
         <ul id="social">
<li><a class="fb" target="_blank" href="https://www.facebook.com/somusicfestival">Facebook</a></li>
<li><a class="tr" target="_blank" href="https://twitter.com/sormusicfest">Twitter</a></li>
<li><a class="dp" href="donation_program.html">Instrument Donation Program</a></li>
</ul> 
           <!-- main paper area -->
   <h2><span id="pgt">2015 Festival Tickets</span></h2>
        <div id="paper">

Similar Messages

  • Help with a weird problem: MB Air, Internet, and Cinema Display

    I have the first MacBook Air, running the latest Leopard release.
    I use an Airport Extreme with Verizon FIOS.
    I have no problems connecting with the Internet (knock on wood) on the Air. However, when I use a 23-inch Cinema Display (not the most recent CD) with the Air my Internet connection slows to a crawl, or I can't connect at all. I unplug the CD from the Air, and I can connect to the Internet again quickly.
    Any idea what the problem is?
    The Air works well with the CD. The only problem is when I use the Air connected to the CD and access the Web.
    Thanks in advance for any help.

    The Air is plugged in, and all appears to be OK with the Air's power. Same with the Cinema Display. The Air appears to have the power to render properly on the Cinema Display but not enough juice left to engage its built-in wi-fi to access the web? I am at a complete loss on this one. Will be calling Apple support or stopping by the Genius Bar, as I have one other item (different computer) I must deal with.
    Thanks.

  • I need help with a browser problem

    I am was given a new iMac G3 (from 2001) which was really never used.I have not yet had any serious problems with it, but really could use some help with a browser problem.
    I have 4 different web browsers that needs the macro media flash player update. The browsers I use are internet explorer, iCab, Netscape, and the original Mozilla Firefox.
    It would be of great appreciation for the readers of this post to answer my question.
    I am also having the problem with installing the plug - ins for the browsers. Thank You For Taking the Time To read This!

    Hi, rynodino -
    As Tom has suggested, plugins need to be installed in the Plug-Ins folder for the browser.
    Typically each browser will have its own Plug-Ins folder, usually located in the same folder containing the browser itself. In order for each of several browsers to access the same plugins, the plugins must be replicated and placed in each of the Plug-Ins folders for each of the browsers. The easy way to do that is to hold down the Option key while dragging a plugin to the new location - a copy (not an alias) of the plugin will be generated at the location it is dragged to.
    Most plugins will display a Netscape icon regardless of where they are located - this is normal.
    It is not unusual for the installer for a plugin to default its install to the Plug-Ins folder for Internet Explorer. So be it. Just replicate the new plugin to the other Plug-Ins folders as needed.
    Note that some plugin installs will involve more than one item. For those, be sure to replicate all items for it. Using labels can help identify what is new, what has been most recently added, in a Plug-Ins folder.

  • Help with stuttering/jittering problem AFTER export

    Hi all,
    I'll describe the problem, then the solutions I've tried. First, my system is a Dell Precision 690 3.0Ghz dual core, 2Gb ram, win XP pro service pack 3, Premiere CS4. I also updated to the latest nVidia drivers (8 Jan 09, ver 181.20) which fixed a separate crashing problem with CS4.
    Here's the problem. My video in the timeline previews perfectly. No jittering, stuttering, or flickering. When I export my video, I always get some scenes jitter or stutter (the action in the scene jumps around back and forth). This generally occurs in the same places of a scene. I don't have any stills or freeze frames.
    I've read some of the forum threads on flicker and stutter, but they mainly apply to a frozen frame, or picture. I've played with the following with no effect: anti-flicker, gaussian blur, increasing my bit rate, exporting to different formats (mpeg1, avi, wmv).
    My frame rate is 29.97 drop frame. It wouldn't allow me to change my field order. Other settings are NTSC, multiplexer (Mpeg1) (I'm not sure what that does), multiplexer bit rate=variable, video bit rate tried at CBR= 3.0Mbps, and VBR1 (min=1, avg=3,max=4.5).
    This is driving me crazy as my timeline preview is perfect. Please help!!!
    Thanks very much in advance! Also, is CS3 less problematic than CS4?
    RickyRoma

    Ricky:
    The successful export was based on a time consuming troubleshooting work-around.
    This was a corporate video that was played at a fairly large meeting. Several months later other departments of the company wanted to use the same video, but with some shot changes that are relevant to their departments. In the meantime, we upgraded to CS4 and had to open the CS3 project with CS4 (We uninstalled CS3).
    I narrowed down the jitter problem to a graduating Gaussian blur added to a PSD on Video layer 1 that had an image above it on Video layer 2 with a transparent background. Gaussian blur and fast blur cause unacceptable image shake when the timeline is rendered and the shaking exists in the exported AVI. Fortunately, I was able to overlay segments of the original CS3 exported avi over the shaking areas in the new CS4 project because those areas were not changed.
    The overlay presented yet another minor problem. The aspect ratio of a widescreen NTSC video exported from CS3 is about 8 pixels wider than that exported from CS4. So I had to stretch the old CS3 overlayed avi segments to a place on the timeline where the aspect ratio change was not detectable.
    *It is possible that one of the editors stretched the width of the CS3 avi. One person in the forum did confirm though that CS3 exported avi's with a slightly wider aspect ratio than CS4.
    We had a few other weird problems with this converted from CS3, CS4 project:
    1.) Certain still image transitions failed to work. They would appear normal until rendered. The exported avi would be missing the transitions.
    I found a workaround... For whatever reason hitting the "reset" icon in the Effects Control pallet (keyframe added) fixed the missing transition problem.
    2.) Some timelapse, scaled down P2 1080i footage on the timeline exported with an odd unintended effect. The sky with clouds would hold a few frames, then jump ahead. Kind of a stop-start effect that was not in the original footage.
    Didn't find a work-around.
    3.) A still image at the end of the video shook violently in the export.
    I fixed that by being able to overlay the original CS3 avi over this area.

  • Hello, im new to mac and I need some help with a java problem.

    Hello, im new to mac. I just need someone who can help with a problem ive come across when playing online games that run java. The game is arcanists. its on the funorb website. really fun game and i love it, but i cant play it without my screen keep scrolling or my character not responding at all. please get back at me ASAP. thx apple friends!

    FF has an extention that can be used to increase the conection speed. Its called Tweak Network 1.1 I see a difference on my iMac G5. Its not huge but it may be a big difference on yours.
    http://www.bitstorm.org/extensions/tweak/

  • Help with this occurring problem group differs on Library should be 0 group is 80

    Please can someone help me with the following problems when using disk utility.
    Keep getting the same repeating errors after repairing.
    Group differs on "Library:; should be 0; group is 80
    Permissions differ on "Library"; should be drwxr-xr-x; they are drwxrwxr-t.
    Group differs on :Library/Preferences:; should be 0; group is 80.
    Permissions differ on "Library/Preferences"; should be drwxr-xr-x; they are drwxrwxr-x.

    You can safely ignore it:
    http://support.apple.com/kb/ts1448

  • Please I really need help with this video problem.

    Hi!
    Please I need help with this app I am trying to make for an Android cellphone and I've been struggling with this for a couple of months.
    I have a main flash file (video player.fla) that will load external swf files. This is the main screen.When I click the Sets Anteriores button I want to open another swf file called sets.swf.The app is freezing when I click Sets Anteriores button
    Here is the code for this fla file.
    import flash.events.MouseEvent;
    preloaderBar.visible = false;
    var loader:Loader = new Loader();
    btHome.enabled = false;
    var filme : String = "";
    carregaFilme("home.swf");
    function carregaFilme(filme : String ) :void
      var reqMovie:URLRequest = new URLRequest(filme);
      loader.load(reqMovie);
      loader.contentLoaderInfo.addEventListener(Event.OPEN,comeco);
      loader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS,progresso);
      loader.contentLoaderInfo.addEventListener(Event.COMPLETE,completo);
      palco.addChild(loader); 
    function comeco(event:Event):void
              preloaderBar.visible = true;
              preloaderBar.barra.scaleX = 0;
    function progresso(e:ProgressEvent):void
              var perc:Number = e.bytesLoaded / e.bytesTotal;
              preloaderBar.percent.text = Math.ceil(perc*100).toString();
              preloaderBar.barra.scaleX =  perc;
    function completo(e:Event):void
              preloaderBar.percent.text = '';
              preloaderBar.visible = false;
    btHome.addEventListener(MouseEvent.MOUSE_DOWN,onHomeDown);
    btHome.addEventListener(MouseEvent.MOUSE_UP,onHomeUp);
    btSets.addEventListener(MouseEvent.MOUSE_DOWN,onSetsDown);
    btSets.addEventListener(MouseEvent.MOUSE_UP,onSetsUp);
    btVivo.addEventListener(MouseEvent.MOUSE_DOWN,onVivoDown);
    btVivo.addEventListener(MouseEvent.MOUSE_UP,onVivoUp);
    btHome.addEventListener(MouseEvent.CLICK,onHomeClick);
    btSets.addEventListener(MouseEvent.CLICK,onSetsClick);
    function onSetsClick(Event : MouseEvent) : void
              if (filme != "sets.swf")
                          filme = "sets.swf";
                          carregaFilme("sets.swf");
    function onHomeClick(Event : MouseEvent) : void
              if (filme != "home.swf")
                          filme = "home.swf";
                          carregaFilme("home.swf");
    function onHomeDown(Event : MouseEvent) : void
              btHome.y += 1;
    function onHomeUp(Event : MouseEvent) : void
              btHome.y -= 1;
    function onSetsDown(Event : MouseEvent) : void
              btSets.y += 1;
    function onSetsUp(Event : MouseEvent) : void
              btSets.y -= 1;
    function onVivoDown(Event : MouseEvent) : void
              btVivo.y += 1;
    function onVivoUp(Event : MouseEvent) : void
              btVivo.y -= 1;
    Now this is the sets.fla file:
    Here is the code for sets.fla
    import flash.utils.Timer;
    import flash.events.TimerEvent;
    var video:Video;
    var nc:NetConnection;
    var ns:NetStream;
    var t : Timer = new Timer(1000,0);
    var meta:Object = new Object();
    this.addEventListener(Event.ADDED_TO_STAGE,init);
    function init(e:Event):void{
    video= new Video(320, 240);
    addChild(video);
    video.x = 80;
    video.y = 100;
    nc= new NetConnection();
    nc.connect(null);
    ns = new NetStream(nc);
    ns.addEventListener(NetStatusEvent.NET_STATUS, onStatusEvent);
    ns.bufferTime = 1;
    ns.client = meta;
    video.attachNetStream(ns);
    ns.play("http://www.djchambinho.com/videos/segundaquinta.flv");
    ns.pause();
    t.addEventListener(TimerEvent.TIMER,timeHandler);
    t.start();
    function onStatusEvent(stat:Object):void
              trace(stat.info.code);
    meta.onMetaData = function(meta:Object)
              trace(meta.duration);
    function timeHandler(event : TimerEvent) : void
      if (ns.bytesLoaded>0&&ns.bytesLoaded == ns.bytesTotal )
                ns.resume();
                t.removeEventListener(TimerEvent.TIMER,timeHandler);
                t.stop();
    The problem is when I test it on my computer it works but when I upload it to my phone it freezes when I click Sets Anteriores button.
    Please help me with this problem I dont know what else to do.
    thank you

    My first guess is you're simply generating an error. You'll always want to load this on your device in quick debugging over USB so you can see any errors you're generating.
    Outside that, if you plan on accessing anything inside the SWF you should be loading the SWF into the correct context. Relevant sample code:
    var context:LoaderContext = new LoaderContext();
    context.securityDomain = SecurityDomain.currentDomain;
    context.applicationDomain = ApplicationDomain.currentDomain;
    var urlReq:URLRequest = new URLRequest("http://www.[your_domain_here].com/library.swf");
    var ldr:Loader = new Loader();
    ldr.load(urlReq, context);
    More information:
    http://help.adobe.com/en_US/ActionScript/3.0_ProgrammingAS3/WS5b3ccc516d4fbf351e63e3d118a9 b90204-7de0.html
    If you're doing this on iOS you'll need to stripped SWFs if you plan on using any coding (ABC) inside the files. You mentioned iOS so I won't get into that here, but just incase, here's info on stripping external SWFs:
    http://blogs.adobe.com/airodynamics/2013/03/08/external-hosting-of-secondary-swfs-for-air- apps-on-ios/

  • Can someone help with a networking problem?

    Here's a situation I need some help with:
    I live in a semi-detached house. My neighbour has broadband, I don't. The phone company (BT) has said it would cost too much to install another line to enable me to have broadband, and would involve digging up the road and the garden, which they're not prepared to do.
    However, someone at work has suggested that I approach my neighbour and ask if I could 'share' their broadband connection and in return pay a contribution to their monthly costs.
    For this, I believe, I would need to buy a router, plus something to make my Mac 'wireless'.
    Now, I consider myself Mac-savvy, but when it coms to wireless stuff I confess I know very little! So if someone could explain in simple terms what I would need to buy and approx costs I be very grateful!
    I have a G5, and I believe my neighbour is a PC user.
    Also, can someone explain how the whole 'share' thing works? Does my neighbour have to have their computer on all the time? Do I need to sign up with an ISP? Will having two computers accessing one line slow it down significantly?
    Many thanks,
    Andy

    Hi Andy, before going too far down the 'sharing' route I would rattle some cages chez BT. If your neighbour has broadband then you and they are within a hair's breadth (line length speaking) of the same distance to the exchange. If they have enabled BB next door, why can't they enable BB for you without the hassle? I live on a mobile home site in the back of beyond in Devon and when I upgraded from dial-up to BB, and then to 1 meg there was no problem. There was a two week hiatus while BT did their stuff 'on the line' but it all went without a hitch. Er...I take it you do have an exclusive landline?
    However, if the situation re the line is as per, then the simplest way (to obviate any wifi interference issues) would be for you or neighbour to route an ethernet cable through walls/window frames from your Mac to a router on their side of the wall. (Approx £30?) This would be connected to their phone line. Their PC would also plug into the router. (Which they may already have if they're on BB, though they may have a nasty USB BB modem &nbsp:&nbsp: No good for what you want.
    If you/they don't want the 'hardwire' option then first you have to wifi enable your Mac if it is not already. Not sure of the costs but check on the Apple website for 'Airport Extreme Card'. Don't go the wifi USB dongle route, apparently they are not VG, though I've no personal experience. You would then have to get a wifi router modem (from £40 I think, it's a long time since I've looked, my Belkin has been virtually faultless) which would sit on their side of the wall plugged into the BT socket. Their PC would either plug into that or connect wirelessly with it, as is their wont. That's basically it, but there could still be interference issues, eg, two households with microwaves, cordless phones; intervening walls, bookcases, filing cabinets etc., etc.,
    If done via either of the above, then no, your neighbour doesn't have to have their PC on all the time, if ever.
    You don't have to sign up with an ISP, it would have to be a 'gentleman's agreement' that you bung him £x pm for your share. He is already paying his ISP.
    In practice, sharing would only slow down large downloads.If you were each downloading a large file at the same time then you would be sharing the bandwidth, so your respective files would download at half the speed than they would otherwise. If you are each surfing and if you both 'clicked' at the same time then, yes, he might think, "Wish I hadn't said yes to Andy, this page is taking ages". I don't really think anyone would notice though unless he was surfing at the same time as you were downloading something big, or vice versa.
    I hope the above is some help but I would have a word with the neighbour first and sound them out, after rattling BT that is...
    Come back here if you want more help.
    Good luck!
    Adrian

  • Need help with simple mask problem

    hi there this is mark from superbooty a band that has played in the bay area for over 10 years...
    i was wondering if someone could help me with a Motion2 problem i'm having regarding masks.
    i'm working on this simple animated scene of a car going by a beach - the photo is from the passenger side and shows the outside mirror.
    i'm moving the background (different from the original that came with the car) and i want to move an image of tokyo inside the mirror housing too.
    i figured out how to do the mask but when i try to animate the image of tokyo the mask layer moves with it. when i lock the mask i can't move the image - ???
    there's got to be a way to lock the mask but be able to move what it is masking..
    here are the links to three images that show what the problem is - the first is
    the shot of the scene unmasked, shot 2 is the scene with the mask enabled, and the third is the shot when i try to animate the tokyo background:
    http://superbooty.com/mirrorbeach1.jpg
    http://superbooty.com/mirrorbeach2.jpg
    http://superbooty.com/mirrorbeach3.jpg
    any help would be most appreciated - thanks!

    Adam's solution is the one I'd use - put the mirror contents in a layer, mask the layer, then manipulate the mirror content image. Did this solve it for you - if so, please click on the or buttons over posts as appropriate...
    Patrick

  • Help with a small problem....

    Hello friends,
    I have 2 minor problems using msaccess....
    1).I was designing a login appln i am having a hard time with case sensitivity...
    say suppose username:Scott,password:Tiger
    it authentication username:ccott,password:tiger
    and so on without checking case sensitivity....
    my sevlet code wud look something like this....
    String username=request.getParameter("username").trim();
    String password=request.getParameter("password").trim();
    rs=stmt.executeQuery(select [some value] from login where uid='"+username+" And pwd='"+password+"'");
    if(rs. next()){
    else{
    out.println("Invalid");
    2).I have a memo field in my table which holds a large set of text data....
    This might include double quotations (") whever this charecter is encountered the servlet or the jsp is replacing this charecter by (?).
    Though i got a hint of why it is happening i'm unable to fix that......
    An advice wud really help me out....
    Thanks In Advance !! !! !!
    REGARDS,
    RAHUL

    I don't do MSAccess, but I found this thread that made some sense:
    http://www.experts-exchange.com/Databases/MS_Access/Q_21645848.html
    Maybe it will help with your case sensitivity problem. It basically says to perform a secondary comparison based on Hex or Decimal values of the returned usernames/passwords. Not optimal, but that's what you get for using Access and not a production quality DB (IMHO). It's not like there aren't free ones out there.
    As far as your "quote" problem. Are you saying that trying something like this doesn't work?:
    String text = request.getParameter("text");
    String id = request.getParameter("id");
    if (text != null) {
      PreparedStatement st = con.prepareStatement("UPDATE table SET text = ? WHERE id = ?");
      st.setString(1, text);
      st.setString(2, id);
      st.executeUpdate();
    }Of course you need to catch exceptions, etc. But the general idea should work. You see Access doesn't need to provide PreparedStatements, the driver (I assume JDBC-ODBC bridge) should.

  • Please help with Nokia N95 problem.

    If anyone can help with this I’d be much appreciated, I have a N95 on contract with T-Mobile. When I try to play videos from myspace, or you tube etc… I get a message telling me the following.
    “Hello, Either you either have JavaScript turned off or an old version of macromedia's flash player click here to get the latest flash player”.
    I then get the option of clicking on a link within the previous sentence statement that directs me to acrobat downloads home page where I get the following message.
    “We are unable to locate a web player that matches your platform and browser. Please visit our table of recommended web players”
    This is deeply frustrating as in nearly every other way I feel the phone is perfect. If Any one can hep me fix this problem I’d be much appreciated.

    daperk,
    You should post this to board "Smartphones, Nseries and Eseries Devices".

  • Please help with column float problem in IE8

    Hi there,
    Sorry to be so pushy - but I am desperate for help!!
    Having serious problems with my site in some PC's showing Internet Explorer 8. My right column floated right is moving down the page underneath the left column..
    It shows fine on IE8 on my PC - however on my clients PC (vista with IE8) it is showing up as mentioned above. Is there a fix for this.
    Here is my link http://www.dooks.com/pgs/welcome.html
    The css is all there! If you need anything please let me know as I need to get this sorted - I have had serious issues with this site that I have never had before with other sites and am starting to think there is a bug in my software. I redid the index page and this one page (linked above) to see what my problems are - so help with query v appreciated.
    Many thanks,
    Karen

    Lawrence_Cramer wrote:
    A point to keep in mind is that IE8 is still in Beta.
    Not anymore.
    http://www.microsoft.com/Presspass/press/2009/mar09/03-18IE8AvailablePR.mspx
    "REDMOND, Wash. — March 18, 2009 — Today Microsoft Corp. announced the availability of Windows Internet Explorer 8, the new Web browser that offers..."
    Mark A. Boyd
    Keep-On-Learnin' :-)

  • Need help with this book problem...Pig game...can ANYONE help!??

    I need help with the following book problem...could someone write this code for me?? Thanks!!
    First design and implement a class called PairOfDice, composed of two six-sided Die objects. Using the PairOfDice class, design and implement a class to play a game called Pig. In this game, the user competes against the computer. On each turn, the current player rolls a pair of dice and accumulates points. The goal is to reach 100 points before your opponent does. If, on any turn, the player rolls a 1, all points accumulated for that round are forfeited and control of the dice moves to the other player. If the player rolls two 1s in one turn, the player loses all points accumulated thus far in the game and loses control of the dice. The player may voluntarily turn over the dice after each roll. Therefore the player must decide to either roll again (be a pig) and risk losing points, or relinquish control of the dice, possibly allowing the other player to win. Implement the computer player such that it always relinquishes the dice after accumulating 20 or more points in any given round.
    I realize this is a long code, so it would be greatly appreciated to anyone who writes this one for me, or can at least give me any parts of it. I honestly have no clue how to do this because our professor is a dumbass and just expects us to know how to do this...he doesn't teach us this stuff...don't ask. Anyways, thanks for taking the time to read this and I hope someone helps out!! Thank you in advance to anyone who does!!!

    Nasty comments? It's not a matter of not liking you, it's a matter of responding to the
    "I'ts everyone else's fault but mine" attitude of your post.
    If you are genuine, the program is very easy to write, so, your Professor is correct when he said you should
    be able to do it. I'm still very much in the beginner category at java, and it took me only 20 mins to write
    (+5 mins to design it on paper). 2 classes in one file < 100 lines. Most of the regulars here would do it in half the time / half the lines.
    All of the clues are in the description, break them down into their various if / else conditions. Write it down on paper.
    Have a go. Try to achieve something. Post what you've tried, no-one will laugh at you, and you will be
    pleasanty surprised at the level of help you will get when you've "obviously" made some effort.
    Again, have a go. If you don't like problem-solving, then you don't like programming. So, you gotta ask
    yourself - "what am I doin' here?"

  • Please Help with text parsing problem

    Hello,
    I have the following text in a file (cut and pasted from VI)
    12 15 03 12 15 03 81 5 80053 1 1,2,3 $23.00 1 ^M
    12 15 03 12 15 03 81 5 84550 1 1,2,3 $15.00 1 ^M
    12 15 03 12 15 03 81 5 84100 1 1,2,3 $15.00 1 ^M
    12 15 03 12 15 03 81 5 83615 1 1,2,3 $15.00 1 ^M
    12 15 03 12 15 03 81 5 82977 1 1,2,3 $15.00 1 ^M
    12 15 03 12 15 03 81 5 80061 1 1,2,3 $44.00 1 ^M
    12 15 03 12 15 03 81 5 83721 1 1,2,3 $15.00 1 ^M
    12 15 03 12 15 03 81 5 84439 1 1,2,3 $44.00 1 ^M
    12 15 03 12 15 03 81 5 84443 1 1,2,3 $40.00 1 ^M
    12 15 03 12 15 03 81 5 85025 1 1,2,3 $26.00 1 ^M
    12 15 03 12 15 03 81 5 85008 1 1,2,3 $5.00 1 ^M
    this method reads the text from a file and stores it in a ArrayList
        public ArrayList readInData(){
            File claimFile = new File(fullClaimPath);
            ArrayList returnDataAL = new ArrayList();
            if(!claimFile.exists()){
                System.out.println("Error: claim data - File Not Found");
                System.exit(1);
            try{
                BufferedReader br = new BufferedReader(new FileReader(claimFile));
                String s;
                while ((s = br.readLine()) != null){
                         System.out.println(s + " HHHH");
                        returnDataAL.add(s);
            }catch(Exception e){ System.out.println(e);}
            return returnDataAL;
        }//close loadFile()if i print the lines from above ... from the arraylist ... here is waht i get ...
    2 15 03 12 15 03 81 5 80053 1 1,2,3 $23.00 1 HHHH
    HHHH
    12 15 03 12 15 03 81 5 84550 1 1,2,3 $15.00 1 HHHH
    HHHH
    12 15 03 12 15 03 81 5 84100 1 1,2,3 $15.00 1 HHHH
    HHHH
    12 15 03 12 15 03 81 5 83615 1 1,2,3 $15.00 1 HHHH
    HHHH
    12 15 03 12 15 03 81 5 82977 1 1,2,3 $15.00 1 HHHH
    HHHH
    12 15 03 12 15 03 81 5 80061 1 1,2,3 $44.00 1 HHHH
    HHHH
    12 15 03 12 15 03 81 5 83721 1 1,2,3 $15.00 1 HHHH
    HHHH
    12 15 03 12 15 03 81 5 84439 1 1,2,3 $44.00 1 HHHH
    HHHH
    12 15 03 12 15 03 81 5 84443 1 1,2,3 $40.00 1 HHHH
    HHHH
    12 15 03 12 15 03 81 5 85025 1 1,2,3 $26.00 1 HHHH
    HHHH
    12 15 03 12 15 03 81 5 85008 1 1,2,3 $5.00 1 HHHH
    HHHH
    I see the ^M on the end of the lines ... but i dont understand why im getting the blank lines
    in between each entry ... I printed "HHHH" just to help with debugging ... anyone have any ideas why i am getting the extra blank lines?
    thanks,
    jd

    maybe its a FileReader deal.. Im not sure, maybe try using InputStreams. This code works for me (it reads from data.txt), give it a try and see if it works:
    import java.io.*;
    public class Example {
         public Example() throws IOException {
              BufferedReader b = new BufferedReader(new InputStreamReader(new FileInputStream("data.txt")));
              String s = "";
              while ((s = b.readLine()) != null) {
                   System.out.println(s);
              b.close();
         public static void main(String[] args) {
              try {
                   new Example();
              catch (IOException e) {
                   e.printStackTrace();
    }

  • Help with "simple" JFileChooser problem...

    Hi all,
    how do I set the font in a JFileChooser???
    I have tried everything, but it always uses the Look & Feels default font setting. Can I change the default Look&Feels font setting?
    Greatfully for any suggestions!
    Cheers
    Anders ;-D

    Hello!
    You can use the UIManager, e.g. UIManager.put("FileChooser.font", new Font("Arial",
    Font.BOLD, 14);
    Well, that didn't seem to help with my case either. So I tried something else: I overrided all of the defaults by using UIManager.put(key, value) this way I got all of the Fonts in the JFileChooser to change.
    Correct me if I'm wrong... ;)
    - Cathra -
    Sample Code that performs the requested:
    // Prepare the resources
    FontUIResource font12Arial = new FontUIResource( "Arial", Font.PLAIN, 12 );
    // Put values into UIDefaults (before initializing the JFileChooser)
    UIManager.put( "ToolTip.font", font12Arial );
    UIManager.put( "OptionPane.messageFont", font12Arial );
    // shown for example
    UIManager.put("FileChooser.openButtonText", "OpenUp");
    UIManager.put("Button.font", font12Arial);
    UIManager.put("Label.font", font12Arial);
    UIManager.put("Table.font", font12Arial);
    UIManager.put("TextField.font", font12Arial);
    UIManager.put("ScrollPane.font", font12Arial);
    UIManager.put("ComboBox.font", font12Arial);
    UIManager.put("CheckBox.font", font12Arial);
    UIManager.put("TitledBorder.font", font12Arial);
    UIManager.put("RadioButton.font", font12Arial);
    UIManager.put("ToolTip.font", font12Arial);
    UIManager.put("TextPane.font", font12Arial);
    UIManager.put("TextArea.font", font12Arial);
    UIManager.put("Tree.font", font12Arial);
    UIManager.put("List.font", font12Arial);
    UIManager.put("MenuBar.font", font12Arial);
    UIManager.put("Menu.font", font12Arial);
    UIManager.put("MenuItem.font", font12Arial);
    UIManager.put("TableHeader.font", font12Arial);
    UIManager.put("TabbedPane.font", font12Arial);
    // somewhere in the code:
    JFileChooser c = new JFileChooser();
    c.showOpenDialog(aParentFrame);

Maybe you are looking for