Help with browser/cache Possible iCloud issue- I think

A few months ago I built a website through Volusion.com.  I also bought my domain name through them: whisperingcreektradingpost.com
Shortly afterward I became dissatisfied with their service and chose to move to Shopify.com
In order to move my domain name, I had to transfer it to GoDaddy.com first and then follow Shopify instructions on how to have it point to my new store with them. IP address, etc.
So I did all that, and for a little while it seemed okay, but periodically would still point to the old Volusion store.  Today, Shopify told me that I needed to make sure all the setting with them were set correctly and to also add the domain name without the “www” to the list of what would point to the domain name.
Everything in Shopify is now set so that the following three items all point only to the main domain name whisperingcreektradingpost.com
1. whisperingcreektradingpost.com
2. www.whisperingcreektradingpost.com
3. whispering-creek-trading-post.myshopify.com
For the rest of the day and still tonight, I cannot get to my Shopify store at all.  Not on either of my desktops, laptop, two iPads, iPhone or iPod.  Everything on my network takes me to the old Volusion store when I type in that domain.  I even downloaded Chrome and tried that on the three computers, still no success. 
Even when I am in my admin section ON the Shopify website, when I input the data for a product, save it, then click the link to view in browser- it STILL takes me to the old Volusion site- even from INSIDE my Shopify admin!!!
Over an hour on the phone with Shopify tech support did not clear it up.  I cleared the data on every device on every browser.  Restarted every device, etc.  My daughter is next door with her own internet service account and can bring up my new site with no problem. 
The internet service provider swears they cannot store anything like cookies or cache on the router so it is not on them, Shopify is able to get to my site with no problem.  They told me that their only job is to make sure I have a connection to the internet. Period.  And that the problem of not getting the ‘right one’ is not something they can help with and if they sent someone out to prove that I would be charged for the service call.
Is it possible that there are cookies/cache on the iCloud that keeps putting the information back on my devices?  Is there some way that within my network they are all sending each other the case information before I can clear it?
I am the only one, and every device on my network, that cannot get any browser to go to the new website instead of the old one.
In addition, even with all the updates AND restarting several times, my internet connection is dragging something awful now.
Help.
I am very frustrated.

The browser icon availability is controled by the carrier provisioning. Assuming that you have a BlackBerry specific data plan then your device is properly provisioned. All you should have to do to get the browser icon back is register your BlackBerry on the network.
Go to Options > Advanced Options > Host Routing Table. Press the menu key and select Register Now. If the icon does not reappear after a minute or two them remove the battery for 10 seconds.

Similar Messages

  • Ipod doesn't work on speakers but headphones are fine and speaker works with iPhone. Possible connector issue? Any thoughts on how I can get the fixed?

    ipod doesn't work on speakers but headphones are fine and speaker works with iPhone. Possible connector issue? Any thoughts on how I can get the fixed?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • Please Help With Strange Cache Issue

    My Setup:
    a rpt report is "publish as web service" to a site hosted on IIS 7
    a Reportviewer control from a win app. accessing the report by seting its reportsource to http://xxxxxxxxxx/x.asmx
    Everything load and work correctly the first time i open my report from the winform
    My Strange Problem:
    When i re access the report (by closing down the winform then reload it and the reportviewer control) , it does not refresh data from the database again. I run a trace and verify this. It seem to be using some kind of server cache that i would like to turn off and ahve it hit the database every time i open the report
    Could someone please help?
    thanks

    So, all of the below is unknown:
    What version of CR? Unknown
    What updates for CR have been applied? None that I know of
    Make sure "Saved data" with report is not enabled. Unknown
    Make sure you dispose and close the report object. Unknown
    With all due respect, to use an analog, you're essentially saying; I got a car and it does not work. No idea if it has three wheels or four. No idea what make. No idea what engine. No idea if it uses gas, jet fuel, hydrogen... Now see if your local neighborhood mechanic can give you an idea ho to fix the car.
    Not sure why you do not have the info, unless this is a 3rd party app. If that is the case, you need to go to who ever created the app and get them to support you on it. E.g.; they will know the details and if need be, they can supply those to you or to this forum and we can go and see if we can get that car going.
    Ludek

  • Help with browser issue - Acrobat Pro default for PDF

    Hello,
    I have Acrobat Pro CS3 set as default for reading pdf's, because I often have to edit the pdf's I open. This works fine with pdf's I open from disk.
    However, it seems that somehow Acrobat Pro has taken over as default for opening pdf's inside browsers as well. My plugins list in FF shows "Adobe Acrobat 9.1.0.163 Adobe PDF Plug-In For Firefox and Netscape". Whenever I navigate to a page which is a pdf, the entire Acrobat Pro external program opens, displaying a blank page and an error message popup - when I click OK on the error, the application closes and the pdf opens in the browser window - sometimes this requires several tries before it opens in browser.
    Here is an image showing the error message and the FF plugin installed: http://terraffirma.com/images/PDF-error.jpg
    I have Reader 9 installed on system, and I am downloading Reader 10 just to see if a reinstall will correct this.
    Any suggestions on how to set system up with Acrobat Pro as default for opening pdf's from disk, and having browser directly use a plugin?
    Thank you.

    Thanks Chris - That did EXACTLY what I wanted it to do.
    I was able to create a button that prompts the user to save the form, then it hides the price fields, then it flattens, then it e-mails the form. The order was important since I wanted the salesperson to be able to save the "not-flattened" form.
    James

  • How Do I get Help with a Major Customer Service Issue?

    Hello,
    I am a Pro Care member and I took my Macbook Pro in to one on the local stores to ask them about a font issue that I was experiencing. One one the Genius guys came over and asked me a few questions and told me that this wasn't a big deal at all, that they just needed to reinstall my default fonts and that it should take maybe 45 minutes. This was at 4:30pm. Six hours later they came back to be to tell me that they had corrected the font issue but all of my user data and applications were lost! It was if I had a brand new Macbook Pro! This was a Friday evening. I was told to take my laptop to a company called Data Savers the next day to have this company try to restore my data/applications.
    I took my laptop to Data Savers on Saturday and they told me that they would need to keep it for a day. I went back to pick it up on Sunday and I was given an external drive that had "raw restored data" on it. When I had been speaking with the store manager about the situation and he wanted me to provide him with a list of software that was on the machine. So, when I got home from picking up my laptop from Data Savers I started it and all I got was an icon of a circle with a slash through it!! I called the guys at Data Savers and told them about this and they asked to bring the laptop back to them on Monday. I did. After running some diagnostics on the machine I was told that my hard drive was "toast!"
    Needless to say I was both upset and distraught! The store manager told me (in emails that I still have) that he understands how upset that I was about coming in for a font related issue and three days later being told that my laptop was no more that a big paper weight. He said (in these emails) that he would replace my laptop and he would try to get me the latest versions of the software that I had to make up for the business that I had lost in the last few days due to the fact that I didn't have have my machine.
    The store manager then called me back on a Tuesday and said that his superiors had told him that he cold not do what he said that he would do. Obviously, this increased my level of frustration. I was able to speak to this manager, think it may have been some sort of regional manager and after indicating that I had emails of the store manager acknowledging the facts of the matter and stating that he was very sorry for what happen, the regional manager said that she wanted me to send her copies of the emails. I told her that the store manager had copies of everything. She told me that she would get back to me. This was Wednesday afternoon. That same evening the store manager called me to say that "because I was lead to believe that Apple would replace my laptop, they would do so. I was told to be be at the store around noon on the following day (Thursday) and to bring my laptop. I was told that they would replace it.
    When I got to the store on Thursday, the manager came up to me and shook my hand and said that he was sorry for all the trouble and inconvenience. He went on to say that before he could replace my laptop that I would have to sign a document saying that I agree that they were not responsible for anything that had happened in the past six days!!
    The fact is, that isn't true and they know it. I have the email to prove it. I didn't sign the document. the next day because I could no longer afford to lose money and clients I went into another Apple store and purchased in brand new system!
    The fact is that I believe that Apples products are far superior to PC products. I was told by some to never buy from Apple again and tell everyone that I know about my experiences with this particular store. All I want is for Apple to do the right thing! Just replace my Macbook Pro like they said they were going to do. They don't have to provide any software updates, just do the right thing and replace my machine!!
    Can anyone tell me if they have had a similar experience and if so, how it was resolved? Who in the corporate office can I talk to about this to get it resolved? Are there and Apple insiders out there that can help me resolve this situation? I would like to avoid having to take legal action if at all possible.
    I look forward to any help that you can provide.
    SydCam

    Apple Computer Customer Relations:
    1-512-674-2500

  • Please Help with Setting Up an iCloud Account with a PC

    Friends,
    I'm using a IBM ThinkPad W510 with Mozilla Firefox as my search engine, Thunderbird as my email program and I recently purchased an iPad 3 and own an iPod.  I am very interested in using iCloud but short of finding an IT Engineer, I am in dire need of step by step help on how to set up iCloud on these three pieces of hardware.  I'm willing to pay for the information if needed but as it looks now, after spending three nights and about 9 hours I don't think it's possible.  My email address is [email protected] and I am unclear as to if I have to use .me or whatever Apples email options are.  I really need help and it's stuff like this that really keep 30 year PC users from jumping the fence and going totally Apple which I may consider in the future after seeing Windows 8 in the fall. Please help me out.
    With Great Respect and Needs,
    Ed

    iCloud Help
    Creating an iCloud account- Frequently Asked Questions
    Apple IDs and iCloud
    iCloud: What version of Windows software am I using for iCloud?

  • I need help with BlackBerry 8820's bluetooth issue

    Hi!
    Please accept my appology of my poor English.
    My 8820 has a bluetooth issue with Bluedio E9+ headset. It must be note that the headset works well with another phone (not BlackBerry). My BlackBerry can't actively connects to bluetooth headset by the method 'Menu' key > 'Connect' option, but still able to receives connection request from the headset and pairs with the headset when i choose Yes. At this point I can use bluetooth function for data transfering, Voice Dialing and music playback (i.e. mp3 files). But each time I try a mp4 file with default video player in Media folder, its audio will never work with the bluetooth function, and the phone's speakers is automatically enabled. I try the menu when the video was playing, but there are only Activate Handset and Active Speakerphone options. Then I was converted the file with BlackBerry Video Converter Pro; I remove and reinsert the battery; I wipe the phone and install new ROM,... But none of them work.
    Please help!
    TheME® ToanDuong™
    Copyright © 1986-2015.
    Mama MiraTech, Co. Ltd.
    All rights reserved.

    This was an unintended result of an intentional change to fix how Premiere Pro handles spanned MXF clips. To learn a bit more, please consult this thread: http://forums.adobe.com/thread/1358012?tstart=0
    Look for the workaround recommended by PPRO developer Wil Renczes.

  • Ipod Nano Help with what is possibly wrong!

    I will try to explain what has happened in the last 2 days so you can possibly diagnose the problem. Thanks
    Yesterday August 10 I plugged my Ipod into an ipod charger I have never used produced by Panasonic. It was a universal attachment for both ipods and cell phones and there where warning labels to connect the USB attachment correctly else it could create reverse polarity. I did not notice the lable when I connected my ipod usb into it and than the other end into my ipod. I was wondering why it wasnt charging and then i noticed the label. I thought that it ruined my ipod right there burning out the circuity. So I decided to plug it into a different ipod FM/Charger adapter to see if it would charge. It did and i was relieved and it charged for about an hour. I listened to it for about 10min than went to bed.
    Next day: I did not touch it until later today (august 11) when i noticed it would not turn on. I tryed to charge it with the Panasonic Ipod charger and it did nothing. When I got back home i attached it to the computer via the usual USB cable and tried to charge it and nothing happened and then connected it to an ipod boombox type dock and it allowed me to acess and listen to music. I allowed it to sit there for about 30min to see if it would hold a charge and once i removed it, it had very little charge. I hurried and connected it to my pc and it began to charge through the USB but when I ran a diagonstics check it said that the ipod connection status failed and the ipod did not show up in "my Computer."
    So basically I believe that the battery is shot do to the reverse polarity but does anyone know if there is a safety on the ipod since it worked after I did that? Or anything else i should try!
    Thanks

    do you know what that game was? (the one that uses the motion sensor feature) because though that post was very helpful, i was wondering if there are games that use the motion sensor feature.

  • Who can I contact about getting some help with this ongoing (several months) issue???

    I will try to make a long story at least somewhat shorter.Comcast customer for 20 years (yes - literally 20 uninterrupted years). 8 years of service at current address.Several months ago I restructure my bill - all my promotions etc had run out and I wanted to reduce my bill.  Ended up being told my customer support that I could save money by getting the "Triple Play" (I've NEVER had comcast phone service, I have my own VOIP phone solution).  They told me I didn't have to "use" the phone, just getting it hooked up would save me money.  Fine.Internet service was not supposed to have been touched / changed at all. A few days after making these changes, a large box from Comcast shows up at the house.  It has TWO cable modems in the box.  Not sure why they sent them - I already had the latest cable modem (that was capable of supporting the phone service they needed to activate). Notified comcast about the shipment.  They said don't worry about it.  Okay, I left them in the box. Tech shows up at house while I'm working.  Wife called and I talked to tech. He said he just needed to get some "numbers" off the modem to activate the phone service (I'm in the IT industry - I will assume he wanted MAC / SN#'s).  I made sure he was making no changes to the modem itself - I've got my own home network setup.  The Comcast cable modem serves as a gateway and it's in bridged mode.  Always has been. I have my own router etc. So a week or so after that visit, the modem started losing connectivity.  It happens almost EVERY DAY and it's almost always in the later afternoon (5:30-7pm EST) and sometimes late at night.  When this happens, the ONLY way to get the connection back is to unplug modem power AND the coax cable input.  It will then restart the modem and it comes back.  Simply unplugging power and restarting will not do it. After multiple hours spent with support on the phone (we activated the newest modem they sent - same issue.  Activated the other modem they sent - same issue.  In fact they weren't able to put one of them in bridged mode at all). They said a tech needed to come out. Tech comes out - checks the feed to the house.  Said there is a lot of noise in the lines.  (Please note that there is one main comcast feed to my house - it splits outside (in the comcast locked box) into two feeds which enter the house. One feed splits and runs the upstairs TV's (Digital Adapters) and the downstairs STB / DVR.  The other feed goes DIRECTLY to my cable modem. I ran those feeds myself when I moved in this house.  Never had an issue before. Cable TV never has issue - only internet.   So the tech replaced some ends on the upstairs line (Cable TV - he said that signal noise could cause issues with the internet).  I then helped the tech run a BRAND NEW line from the split at the comcast box, directly to the modem.  He said the signal / noise looked much better. Next day - same ISSUE - modem dropped connection.  Pull power and coax cable, reseat, modem restarts, signal comes back. I called support again.  They gave me an incident #.  Said they would have a "Crew supervisor" contact me, since it's obvious the problem lies outside of my home. A tech called and left a voice mail on my phone (was working when it came in, couldn't answer).  They did not leave a call back number. Called support again.  They told me a tech would call me back and was advised to leave a call back number.  That was MONDAY of last week.  Haven't heard anything.  The contact # is my cell...no missed calls. Is there another number I can call or email address so I can escalate this issue?  Having to disconnect / reconnect the modem EVERY DAY at least once is getting tiresome.   I'm in the Richmond Virginia area if it matters at all. Thanks.

    ctandc-
    I am so sorry for the delay! I am sending you a private message so that we can discuss your billing concerns more freely.
    At the top of each Forum page, you will see a small gray envelope icon. This icon will have a number next to it if you have any new messages waiting. To open a PM to read it, double click on the envelope. If you click on the white envelope a window will open with tabs for your Private Message Inbox, Sent Messages, Friends, Ignored Users, and Compose new Message. You can also access this area by clicking on the Username in a Thread or post. By default, Private Messages are enabled. You can disable this feature in My Settings>Preferences> Private Messenger.

  • Help with photos.  iPhone - iCloud - iPhoto - Email ?????

    I'm a new mac user.   I switched over from Windows.   The process of obtaining photos from iCloud on my iMac seems like a big hassle.  So inconvenient I can't believe anyone would actually design it this way so maybe I'm just ignorant.
    I take a photo with my iPhone.
    The photo is uploaded through iCloud and appears in my iPhoto on my iMac.
    Now I want to attach the photo to an email in the included mail program.
    When I browse for the photo to attach, I look in "Photos" but iPhoto is grayed out.  Why?
    So what I've been doing is saving the picture to my desktop then attaching it that way.
    This seems like a REALLY stupid extra step.  What am I doing wrong here?  
    Thanks in advance.

    When I browse for the photo to attach, I look in "Photos" but iPhoto is grayed out.  Why?
    Is this where you're seeing the grayed out iPhoto in Mail?
    Or are you trying to use the Attach button to add a photo?
    If the photo is in your iPhoto Library on your Mac then you can  select it and click on the Share button at the bottom right of iPhoto
    and then on the Mail button in the next window:
    and add it to a new email that way.

  • Need Help with "ldap_search: Administrative limit exceeded" issue

    Hi,
    I recently created an index for an attribute called abcSmDisableFlag. When i perform an Ldapsearch using an application owners binddn, 10 entires are returned before i get the error: ldap_search: Administrative limit exceeded. When I use the Directory Manager I do not get this error while the same 10 entries are returned.
    I have analyzed the error and access logs and i think the problem is with the index (notes=U). I performed a reindex on the attribute but it din't work.
    Below are the details i gathered from
    error log:
    [20/Sep/2010:15:04:59 -0400] - WARNING<20805> - Backend Database - conn=1189378 op=1 msgId=2 - search is not indexed base='ou=customers,o=abc
    enterprises,c=us,dc=abc,dc=net' filter='(&(objectClass=abcIdentity)(abcIdmDeleteDate<=2010-09-20)(!(abcSmDisabledFlag=1)))' scope='sub'
    access log:
    [20/Sep/2010:15:04:59 -0400] conn=1189378 op=-1 msgId=-1 - fd=536 slot=536 LDAP connection from UserIP to ServerIP
    [20/Sep/2010:15:04:59 -0400] conn=1189378 op=0 msgId=1 - BIND dn="cn=xyzservices,ou=appid,dc=abc,dc=net" method=128 version=3
    [20/Sep/2010:15:04:59 -0400] conn=1189378 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0.001190 dn="cn=xyzservices,ou=appid,dc=abc,dc=net"
    [20/Sep/2010:15:04:59 -0400] conn=1189378 op=1 msgId=2 - SRCH base="ou=customers,o=abc enterprises,c=us,dc=abc,dc=net" scope=2 filter="(&
    (objectClass=abcIdentity)(abcIdmDeleteDate<=2010-09-20)(!(abcSmDisabledFlag=1)))" attrs=ALL
    [20/Sep/2010:15:05:03 -0400] conn=1189378 op=1 msgId=2 - RESULT err=11 tag=101 nentries=1 etime=4.604440 notes=U
    I have indexed both abcIdmDeleteDate and abcSmDisabledFlag with a presence and equality index.
    I am using Sun Directory Server 6.2. All the nsslapd limits are at Default value and I am not supposed to increase those values.
    I will be very grateful if anyone can kindly share ideas/solutions on this issue and help me out.
    Thanks!!

    I don't know if your issue has been resolved but two things i see here:
    1 - you should not be on 6.2, move to 6.3 or 7.
    2 - your filter is the answer, when you use a filter of "(&(objectclass=abcIdentity)(abcIdmDeleteDate<=2010-09-16)("\!"(abcSmDisabledFlag=1)))", DSEE takes the 1st part of your filter, in your case objectclass=abcIdentity, and does a search on it. Then after retrieving all entries it checks all that have an abcSmDisableFlag <=2010-09-16 and finally out of the remaining entries it will check which do not have an abcSmDisableFlag=1.
    The search on objectClass is resulting in an unindexed search, apparently. What you need to do is alter the order of your attributes in your search filter and have objectClass at the end.
    I hope this makes sense and helps.

  • Need help with 2008 macbook pro superdrive issue pleasee

    hello,
    I have this macbook pro
    Model Family: MacBook Pro
    Display: 15"
    Processor Type: 2.6GHz Core 2 Duo
    Model Number: A1260
    Color: Aluminum
    Factory: China
    Production Year: 2008
    Production Week: 22 (May)
    Production Number: 774
    200 gb hd
    4gb of ram
    also apple care til jun 11
    OK so I bought the computer for 650 from my friend and soon after buying found a problem. The problem was the optical drive not reading all the disc that I put in the system. So I took the macbook pro to apple they installed a new super drive. I get home today and try to install snow leopard and have a issue. The way I went about was starting up holding the option button and waiting to boot from the disc for a fresh install. First time I tried I got a symbol that look like the restricted sign you see when you cant smoke in a area ect... So I restart and try again this time I get to the install screen click does the estimation ect.. 34 minutes than goes to 28 minutes pretty much has frozen there now, and after waiting all this time about 20 minutes I get the spinning beach ball. Also forgot to say that the super drive is now super dooper annoying loud and make odd sounds too with vibration. So I guess make another apple gen bar apt? And have them possible replace the super drive again?
    update just got an error occured while installing mac os x still have spinning beach ball

    I'm guessing Apple didn't do a good job. I think you need to make a return trip. And politely remind them that you're making a return trip.

  • Help with kernel and possible power supply problem

    From 2 days after getting my imac I had my first Kernel restart.  Since then I have done everything apple has asked.  Ram resets and removing everything from the imac itself To find that it still had a kernel problem.  The error messages are Plugnplay or spinlock usually but have also been various ones such as  Kerneltask.  I have done a full reinstall of the operating system and only installed official apps from apple store, adobe flash and silverlight and next day was a kernel error for plugnplay.
    The imac is currently in the shop for a look at but 2 phonecalls back saying they have had no evidence of errors. In fact its perfect for them.  The kernel is usually a few hours from turning it on but can go all day fine But they have had the imac almost a week.
    So the only thing I can think of is if it works great for them is either they are really lucky or have a different electricity supply/cable.  So this leaves me thinking as stupidly as if it is working perfect for them then could it be a surge protector or power supply causing the random crashes?  Even something to do with the power lead itself?  I am really pulling at strings and going crazy because the only other thing I have been told to do is spend a week at a time just adding one thing at a time till the error shows itself so could be months and months.
    i know kernel issues are historically hard to diagnose but any help would be great.  At the moment i have a £3000 paperweight on my desk thats only turned on a few hours a day  because I have no faith in it.

    Hi Joel,
    For the external drive issue try resetting your firewire ports.
    To do this, shutdown and disconnect the firewire devices from your computer and from each other if there is a chain of them. Now disconnect the power cords from both your computer and from the firewire devices. Wait fifteen minutes. Connect up again and see what happens. The FW ports on Macs have a 'self re-setting fuse" that requires all power to be removed for a period of time for re-activation.
    You may also want to try a PRAM reset if that doesn't resolve the issue. Sometimes this can also be implicated in FW problems. Shut down. Hold down the command option p r keys. Now start up, keeping the keys mentioned depressed until the chimes have sounded three times.
    Cheers
    Rod

  • Newbie help with 12i and firefox java issue

    We are in the testing stages for a 12i upgrade. I’m currently testing browser and java version compatibility using an upgraded test system. My problem is the version of java on the desktop client. IE7 will launch the apps fine with any version of java. However, any version of Firefox (including just released v3) will not launch java unless java version 5 update 13 is loaded. I’ve reviewed several metalink docs including 389422.1 and 393931.1 and have used the workaround listed forcing FF to use the older version of java. However, that means that we will have to roll out this older version of java to all clients to use Firefox. During my research I found where Oracle provides a techstack update for 11i (290807.1) that will fix this issue and allow Firefox to work with newer versions of java. Has anyone else run into this issue and if so how did you address it? Is there a 12i update that will fix this issue? I’m a newbie that’s started supporting Oracle, etc. so forgive me for any ignorance I show on the subject. Thanks in advance.

    Tod,
    It sounds like your Oracle E-Business Suite Release 12 instance is configured to request end-users to use JRE 1.5.0_13.
    Firefox has a known limitation (or feature, depending on your point of view): it will invoke only the specified JRE version requested by the E-Business Suite, even if later versions of the JRE (e.g. 1.6.0_03) are installed on the same desktop.
    This behaviour is explained in more detail in Note 290807.1 in Appendix A. Since this behaviour is hardcoded into Firefox, your options are:
    1. Configure your Oracle E-Business Suite Release 12 environment to request a later version of JRE installed on your Firefox-equipped desktops
    2. Use IE -- it doesn't enforce static versioning.
    3. Contact the Mozilla team and request that they provide a new option to use either static versioning (the status quo) or the latest JRE version installed on the desktop.
    Regards,
    Steven

  • Need help with Mac Pro (2008) iCloud sync problem

    I am using a Mac Pro (Early 2008) with multiple drives and partitions, some of which I use for various software testing.  I wanted to have access to the same data on various partitions, so I tried to use iCloud to store some Pages files. I found that in the Mountain Lion Partition that I normally use, that the document data ( Pages, Numbers, etc) would not upload to the cloud... just showed as waiting. All other iCloud Data ( Calendar, Address Book , etc) did sync fine. If I accessed iCloud using a browser or looked on iClould using the iCloud Manage function in the iCloud system preferences, I could see all the files.  I then found that I did have another Mountain LIon partition in which the data syncing all worked.  Other testing showed that if I did a clone of the working partition using SuperDuper, the clone worked properly, but if I did a clean install of 10.8.4, the document data did not sync.If I did a clean install and used the migration assistant to migrate from the working partition, it still did not work.  I later found that if I replaced the top level Library file in a non working partition with the one from the working partition, that I could make the non working partition sync properly. I have not been able to find a subset of the folder that would make things work, but have not tried every combination. At this point my only conclusion is that there must be a bug in the 10.8.4 installer. Apple has been working on this for a few weeks, but has not found anything and cannot duplicate... but they are testing with iMacs.
    Is there anyone with a Mac Pro (2008) who can do a clean install of 10.8.4 on a partition and see if they can still access their iCloud data (Pages, Numbers, Etc). If so that would probably confirm the otherwise unexplanable problem.

    I am using a Mac Pro (Early 2008) with multiple drives and partitions, some of which I use for various software testing.  I wanted to have access to the same data on various partitions, so I tried to use iCloud to store some Pages files. I found that in the Mountain Lion Partition that I normally use, that the document data ( Pages, Numbers, etc) would not upload to the cloud... just showed as waiting. All other iCloud Data ( Calendar, Address Book , etc) did sync fine. If I accessed iCloud using a browser or looked on iClould using the iCloud Manage function in the iCloud system preferences, I could see all the files.  I then found that I did have another Mountain LIon partition in which the data syncing all worked.  Other testing showed that if I did a clone of the working partition using SuperDuper, the clone worked properly, but if I did a clean install of 10.8.4, the document data did not sync.If I did a clean install and used the migration assistant to migrate from the working partition, it still did not work.  I later found that if I replaced the top level Library file in a non working partition with the one from the working partition, that I could make the non working partition sync properly. I have not been able to find a subset of the folder that would make things work, but have not tried every combination. At this point my only conclusion is that there must be a bug in the 10.8.4 installer. Apple has been working on this for a few weeks, but has not found anything and cannot duplicate... but they are testing with iMacs.
    Is there anyone with a Mac Pro (2008) who can do a clean install of 10.8.4 on a partition and see if they can still access their iCloud data (Pages, Numbers, Etc). If so that would probably confirm the otherwise unexplanable problem.

Maybe you are looking for

  • Regarding xml file sequence and sales order sequence not equal

    Hi frnds,                                  The XML File generates after sorting the line items, the sorting is done alphabetically on material master codes but the when the program converts the XML to Sales orders, the line item numbers does not matc

  • Signing Adobe PDF

    Hi, I am trying to "sign" a PDF file. I was able to this AM, but I cannot all of a sudden. It wont let me write or anything. Please help I need this for work!

  • Display Export to ms excel in SAP B1 version 9.1

    Hi Everyone! I am learning SAP B1 version 9.1 at advanced G/L account determination.Highlights of SAP version 9.1 display "Export to ms excel" and "Migrate"button but I can not find them. Everyone that knows these ones, please help me! Thanks & Best

  • ICloud password issues

    Hi I have recently been asked to change my iCloud password because it didn't match my profile.I did this using my iOS device through something called iforgot?? i'm now using my Mac and a pop up came up asking to sign into iCloud with my password.Whic

  • Switching my radio

    I have recently upgraded my Curve 8330, to a newer Torch 9800. I have somehow managed to turn the radio off, on the Curve. I'd like to at least turn that part of the handset on (or enable it, at least), in readiness for a potential new owner. Can som