Help with computer and Mountain Lion

I am running Snow Leopard on my iMac but cannot upgrade to Mountain Lion because my computer was purchased in early 2007. Is there any way to get the iCloud for this computer?

If your Mac meets the following requirements you can upgrade to Lion:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
However Lion is not available directly from the Mac App Store, having been replaced by Mountain Lion, but you should be able to get it by ringing 1-800-MY-APPLE if you're in the USA, or the number given at bottom left of this page for other countries.

Similar Messages

Connectivity issue with LeapPad and Mountain Lion

Has anyone else had issue with connecting a Leappad game console with Mountain lion? I keep getting an error message asking me to switch off and then on again to solve the problem, but it doesn't solve the problem..... I have tried manually giving the Leapster an ip address but whatever i try just fails.. HELP.???

I have the same issue and have contacted tech support.
This is the response I have from them:
Hi,
Thank you for your email,
Unfortunately there is some issues currently with MAC OSX Mountain Lion and the Leappad Explorer drivers. We have been in contact with apple regarding this solution and have developed a fix for the issue. This will be implemented in Apple's next OSX update which should be soon.
If you have any other questions please let us know,
Regards
Don't Miss Out
To ensure that your LeapFrog emails get to your inbox, please add [email protected] to your email Address Book or Safe List.

Selling a 2009 Mac with FCP and Mountain Lion?

I am selling my 2009 iMac and I would like to reset it to the factory settings, BUT I would like to also keep Final Cut Studio and Mountain Lion on it. Is this possible? If not, is there a work-around?

As for the OS (Mountain Lion), no you cannot. Unfortunately, the license is not transferable for any OS purchased at the app store. You will need to erase and reinstall the original OS; if you leave ML on it, the buyer will never be able to reinstall as the purchase/license is tied to your Apple ID forever. You also need to give the buyer the original install disks. I'd tell the buyer that I've discounted the price by $20 so he can buy ML with his own Apple ID since it wouldn't work with my ID.
If you purchased Final Cut on retail disks, then yes, you are allowed to sell or transfer those as long as you do not retain a copy, and you must give the disks to the buyer. It won't do him any good without the disks in case there needs to be a reinstall. If you purchased it at the app store, the same license applies: any app purchased at the app store is not transferable and will not work reliably as Apple's servers would be able to detect its presence on another machine with a different ID.
There is no workaround - this is what is required legally; if you wish to do something else, no one here is going to suggest anything as we would be violating the ToU of these forums.

Help with backup of Mountain Lion & upgrade to Mavericks

I am contemplating an upgrade to Mavericks from Mountain Lion 10.8.5 on my iMac i5 with a 1TB HD (500 GB available) and 8GB memory.
Before doing so, I would like to make sure I can revert if necessary and thinking of possibly using Carbon Copy Cloner to clone my HD onto a Lacie 3TB external HD.
Can someone make suggestions about preparing the 3TB HD? Should I use the 3TB HD strictly for CCC? Or is it of sufficient size to partition the drive to share between CCC and Time Machine? (Partition size suggestions would be helpful if that's a recommended way to go).
I have never used CCC and have not yet purchased it, so if there's any other suggestions for someone not too computer savvy, they would be appreciated. I am not currently using Time Machine, but wouldn't mind the extra safety.
Awhile back I read some unhappy posts on the new Pages & Numbers programs, so I would also like to keep my current Pages & Numbers versions for now.
Thank you.
Barbara

You must first create a new partition on the LaCie. The partition should be a few GBs larger than the total amount of space used on your internal drive.
To resize the drive do the following:
1. Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
2. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)
4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.
You can now clone your system to the new partition:
Clone Mavericks, Lion/Mountain Lion using Restore Option of Disk Utility
     1. Select the destination volume from the left side list.
     2. Click on the Restore tab in the DU main window.
     3. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     4. Select the source volume from the left side list and drag it to
         the Source entry field.
     5. Double-check you got it right, then click on the Restore button.
Destination means the new partition on the LaCie backup drive. Source means the internal startup drive.

PROBLEMS WITH JAMVOX AND MOUNTAIN LION ?

I USE THE JAMVOX GUITAR INTERFACE WITH MY MACBOOK PRO. EVERYTHING WAS WORKING HUNKY DORY AFTER UPGRADING TO MOUNTAIN LION...BUT THEN, AFTER ABOUT THREE WEEKS, IT JUST STOPPED WORKING. EVERY TIME I TRY TO START THE PROGRAM NOW, GET THE SPINNING MAC "WAIT" BALL. IM SEEING ON VOX'S WEBSITE THAT OTHERS ARE ALSO HAVING SIMILAR PROBLEMS. HAS ANYONE FIGURED OUT A WORK AROUND ? MANY THANKS FOR THE HELP.

I am truly disappointed in the new operating system, is there anyway to switch back to OSX Lion and perhaps get my money back?
Why do you think that is the normal performance for Mountain Lion?
First thing to try is boot into Safe Mode by holding down the Shift key on restart.
It will take a little while to boot as it runs some disk checks. Once it is done, it will show the login screen. Log in and try it out. If everything seems normal, you likely have some third-party software that is incompatible with ML.
If it is still messed up, boot into the Recovery HD (cmd-r on restart) and Repair the disk using Disk Utility.
Restart and see if there are still problems.
If so, I would reinstall ML and see if that fixes the issues.

Non NVidia graphics card issues with Adobe and Mountain Lion

It took me a while to figure it out, but now I am certain. If using a Mac with a non nvidia graphics card there will be issues in Mountain Lion while using Adobe products. I tested this with Illustrator CS6 for over a year on 5 different Mac computers.
Here is what happens
As soon as I open Illustrator on a Mac without a NVidia graphics card and I attend to apply an shadow effect, Illustrator crashes. If I do this procedure on a Mac with a NVidia inside, all works well.
I tested this on the following Macs
MacBook Pro (Early 2009) with NVidia 9600M GT - it works
MacBook Pro (Early 2011) with Radeon 6750M - doesn't work
Mac Pro (Early 2009) with Radeo HD 5770 - doesn't work
The same Mac Pro (Early 2009) with NVidia GT120 - it works
MacBook Air (Mid 2012) with Intel HD 4000 - doesn't work
iMac (Late 2012) with NVidia 680MX - it works
Since I owned all these Macs, I could test it several times with different kind of software updates. 10.8, 10.8.1, 10.8.2 and 10.8.3 did deliver the same result. Everytime the same result.
Already got in touch with Adobe
With Illustrator CS5 it worked like a charme, so I assumed it could be an Adobe issue. But Adobe support told me, it's Apple's fault since 10.8 uses different processes for the graphics performance.
What can be done, to resolve this issue? I cannot buy only Macs with NVidia inside, since the small portable front of Macs is only coming with Intel graphics cards. And is there anybody out there, having this issue? I cannot be the only one, using shadows in Illustrator.

With Illustrator CS5 it worked like a charme, so I assumed it could be an Adobe issue. But Adobe support told me, it's Apple's fault since 10.8 uses different processes for the graphics performance.
A typical response. IMO it's most likely a combination of Adobe's reluctance to fix the issue combined with Apple's desire for advancement and change. I've personally experienced several things that've become broken owing to Apple changing fundamental aspects of the OS, and the developers of the third-party software in question have either never fixed their software, or are taking their sweet time. WireTap Studio and Snapz Pro from Ambrosia are a case in point, though they eventually fixed Snapz Pro. Eventually…
Frankly, good luck getting either side to do anything about this. Your best bet is probably getting in touch with AppleCare and seeing if you can get this escalated to Engineering, but I wouldn't hold your breath for a fix from either party. Or perhaps one of the Apple mailing lists will prove useful.

Video "Dropouts" with FCS and Mountain Lion

I would like to see if anyone else is having this problem and maybe save some folks from the experience.
I have two macs.
#1- Imac, 2.93, core 2 duo, 4g ram, 24".
#2-Macbook Pro, 17", 2.53, 4g
4t g-raids
Clean Install done on Imac of Mountain Lion. Reloaded fcs.
Did NOT touch macbook. Still running Snow Leopard.
Working on large video job...1080 60i, avchd, panny cam.
Went to transfer footage using all usual settings.
Video on imac looked like "old school" video drop outs. As you can imagine, it was a long night to figure this out.
Erased footage and hooked up my g-raids to the Macbook. Looked fine.
Took hard drives back to imac, tried transfer again. Stuttering and drop outs continued.
Back to Macbook with Snow Leopard, no problems. My guy is editing job right now on Macbook.
I am in the middle of a clean install of Snow Leopard on the imac. I'm gonna have to send the "boys" out to get my $20 bucks back from Apple.
Thought I'd post it in case someone sees same thing and thinks they are crazy.
Mountain lion could not capture footage without drops. Snow Leopard (my trusty os) did it all.
Shocked I say, Apple....Shocked. (Not really, been down this road before) Never believe what they say. Don't upgrade unless forced by gunpoint.

This is the FCP X forum - you should ask this question in the Final Cut Studio forum:
https://discussions.apple.com/community/professional_applications/final_cut_stud io
Andy

Anyone having issues with MacBook Pro2,2 with sleep and Mountain Lion?

Since installing Mountain Lion on my MacBook Pro (2,2, June 2007), I am unable to put my machine to sleep. I close cover and the fan keeps running.
Anybody have any ideas how to fix this?

Scroll through this board to see the varied problems with ML, I don't think Apple even bothered to test Logic with ML, many problems with interface freeze/lag, also some problems with audio stuttering. Don't know how much longer Snow Leopard will be supported but I'm staying there as long as possible. Sorry I don't have better news.

Audio USB crackles on MBP with Retina and Mountain Lion

I have a USB device connected to my MacBook Pro with Retina Display and the audio crackles no matter what I play. I hardly have any processing working and there are no other USB devices. I think that this was working under Lion but I think this is a problem under Mountain Lion. Anyone else have this problem? I am trying to determine whether the problem is in the MBP or the OS... Thanks :-)

Could be it needs to be connected to both USB port by using a Y USB cable to supply enough power to it. And it won't show up unless there is a CD or DVD disc in it.

Scanning software to work with CS6 and Mountain Lion

Since I upgrading my Mac to OS Mountain Lion 10.8 and downloaded Adobe CS 6 I have been unable to get my Epson Scanner to work properly. Since none of the drivers from the Epson and Adobe websites have worked so that I could scan from photoshop, I am looking into using third party software. Adobe mentioned VueScan in their instructions, but it is expensive and I don't like how it is laid out. It appears that SilverFast only works with 32 bit not the 64 required in CS6.
Has anyone else found scanning software that worked for them?
Or does anyone have an idea of getting the Epson software to work on my machine?
The scanner is an Epson Perfection v600 photo scanner, which is still being sold currently as something that works with new computers.

I have a scanner. I am trying to get a driver or new scanner software to work with it. Someone in a different discussion pointed out an article in MacWorld that goes into why this is not working.
http://www.macworld.com/article/1168305/get_your_scanner_to_work_with_photoshop_cs6.html
I would still be interested to know if anyone has had a positive experience with third party scanning sofware. Vue scan? Silverfast?
Also to the Adobe staff :
This is quoted from the MacWorld article.
Right now, if users are running Mountain Lion (OS X 10.8), they will not be able to scan into Photoshop CS6 as described. According to Adobe, this is an across-the-board problem with the Cocoa classes comprising the scanning interface that it is using in Photoshop. It is neither a user nor a scanner manufacturer issue.
Adobe is aware of the problem, has identified it as an Apple OS issue that they are working with Apple to solve, and offer no time frame for when it will be fixed. "
Any idea on the timeframe or if there will be an anouncement when this is resolved?

Notes don't sync with iphone and mountain lion

I upgraded to mountain lion and I cannot get my notes to sync for the life of me. So now I have notes on my iphone and separate notes on my computer. They never sync, so they are virtually worthless. What the heck happened? I don't use iCloud. In the past, I just clicked sync and the notes would be the same on the computer and iphone. Simple. How can I fix this??

Syncing Notes using iTunes is no longer supported on OS X v10.8 and later. Read more here:
http://support.apple.com/kb/HT4191

Problems with pages and mountain lion

Hey i just updated my iwork, and installed mountain lion, solely for the iwork icloud feature. I do a lot of work on my ipad and it would be very useful if they would sync with my macbook. But unfortunately when i create a new document in pages for the icloud it just says the files name and has a picture of a cloud underneath with "waiting" next to it. Why is this??

Hey i just updated my iwork, and installed mountain lion, solely for the iwork icloud feature. I do a lot of work on my ipad and it would be very useful if they would sync with my macbook. But unfortunately when i create a new document in pages for the icloud it just says the files name and has a picture of a cloud underneath with "waiting" next to it. Why is this??

Potential Problems with Airplay and Mountain Lion

Hey Everyone,
I recently purchased an Apple TV, and I tried to use Airplay with our Macbook Pros. Airplay would work with all of the iOS Devices, but when it came to using with the MBP, it would either show a black screen, or a frozen image of my screen. I called AppleCare, and the rep told me it was a problem with the AppleTV, so I returned it and bought a new one, and it did the same thing. I found out that the problem was occuring because of the type of router I was using. I have a dualband router, and I set everything on one band of the router. I decided to try to place the laptops on a different band, and that's all it took. My airplay now works flawlessly.
So, if you're having a problem with airplay, and you have a dualband router, try placing your computer & iOS devices on the opposite band, and it should work perfectly.
Hope this helps.
- Kaytie Walters

The VPN log looks like:
1      13:34:36.904 09/11/12 Sev=Warning/3
CM/0xA3100027
Adapter address 10.211.55.6 has changed or not detected. Current address(es): 10.98.70.169.
2      13:34:52.044 09/11/12 Sev=Warning/2
CVPND/0xA340000E
Failed to get adapter index.
3      13:35:07.044 09/11/12 Sev=Warning/2
CVPND/0xA340000E
Failed to get adapter index.
4      13:35:07.123 09/11/12 Sev=Warning/2
CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CheckUpVASettings: Found IPADDR entry addr=10.98.70.169, error 0
5      13:35:08.123 09/11/12 Sev=Warning/2
CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CheckUpVASettings: Found IPADDR entry addr=10.98.70.169, error 0
6      13:35:09.123 09/11/12 Sev=Warning/2
CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CheckUpVASettings: Found IPADDR entry addr=10.98.70.169, error 0
7      13:35:10.123 09/11/12 Sev=Warning/2
CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CleanUpVASettings: Was able to delete all VA settings after all, error 0
8      13:35:11.861 09/11/12 Sev=Warning/2
IKE/0xA3000067
Received an IPC message during invalid state (IKE_MAIN:512)
9      13:35:12.407 09/11/12 Sev=Warning/2
IKE/0xA3000067
Received an IPC message during invalid state (IKE_MAIN:512)

Bluetooth issue with iPad and mountain lion

My iPad will pair with my iMac, but it will not connect - since I installed Mountain Lion. It will pair AND connect with Snow Lion. Is this a 'new' OS 10.8 issue?

To print (printer pro) from my iPad. But since it doesn't even connect....

Need help with OS X Mountain Lion

I purchased OS X Mountain Lion from the Mac App store but it will not download. It just says "waiting". How do I go about resolving this?

same problem reported here :
https://discussions.apple.com/message/19721535#19721535
the apple guys by phone couldn't help me
they took 22$ and without software

Help with computer and Mountain Lion

Similar Messages

Maybe you are looking for