Help with configuration vpn server on mac os

Does anyone know a step by step way to configurtae a vpn server on the normal snowleopard
i tried ivpn but i cannot connect to the L2TP vpn server ( i configurated it as described )
does anyone has a solution to try out ivpn
or is there any alternativ way for ivpn

Similar Messages

Help with configuring back to my mac on the time capsule?

I just found out about the "back to my mac" feature within the time capsule. I followed the directions on how to set it up, but I have a problem. it says that I am supposed to enable the nat port mapping protocol. I went to the internet tab in the TC and changed connection sharing to share a public ip address, and then enabled the Nat protocol but when I hit update, it says that I have to correct 3 problems:
1. DHCP beginning address. The dhcp range entered conflicts with the WAN ip address of my device. It shows 192.168.1.2
2. DHCP ending address. The dhcp range entered conflicts with the WAN ip address of my device. It shows 192.168.1.200
3. The wireless device is setup to allow configuration over the ethernet wan port, which decreases network security. It gives me the option to unclick the allow setup over wan box, or I can simply choose to ignore this problem.
What does all this mean? and how can I fix these problems?

3 Broadband presents a whole host of problems when using on the go: broadband it ain't -it has serious issues with gMail and gTalk, loses connections with the latter plus AIM and iChat, sends eMails off into the ether and basically is just toy broadband. I had the chance to compare the service with the offering from O2 Ireland (shortly about to go to 7,2 mbps) and there is just no comparison. To all intents and purposes, O2(IRL) behaves just like real broadband, performs all normals tasks with aplomb and without even getting up steam. This is how HSDPA should be (and this is over bluetooth, not even using the usb datamodem).
I'm dropping 3 IRL as soon as possible and just keeping 3 UK X-series as backup.

Do I have to configure DNS server before configuring VPN server?

Hi,
In my journey to get this mac os X server to actually work...
Do I need to configure DNS server on Mac OS X server first before setting up VPN or ICHAT server?
Or, it seems that I can use my D-Link Gaming router as a DNS server.
I think I'm most confused with which numbers to enter as my DNS... is it the local IP of my mac mini being used as the server (192.168.0.1) or is it the IP address assigned to my cabel modem?
There are so many posts on this, I am feeling lost.... has anyone found a really great step by step that explains how to do this?
thanks
Ethan-

Ethan,
My experience is that it is absolutely necessary to have an external DNS server setup correctly BEFORE you even start installing your OS X Server, so why not keep it. Still, once you have set up OS X Server, you can also use its own DNS server, but be VERY careful to set it up correctly. DNS mistakes, especially the ones regarding server's own IP addresses, are usually not forgiven by OS X Server. Many of us here have learned that the hard way. As for me, I prefer to have a dedicated DNS.
Best regards,
Andrus

The negotiation with the VPN server failed. Verify the server address and try reconnecting

Hi folks,
I am unable to connect VPN, While connecting error occurred. Can anyone advice how to solve this issue.
"The negotiation with the VPN server failed. Verify the server address and try reconnecting"
Thanks
Vinoth

This might help, at least from Harald's post onwards.

My Macbook disconnect with the vpn server after 1-2minutes inactivity

My Macbook disconnect with the vpn server after 1-2minutes inactivity. Why ? I would like maybe 5 minutes later some date download from this vpn server .

I hope this will help ..
setting the following on the VPN custom connection:
a) "lifetime time 24 hours;" or more
b) dpd_delay 0;
c) proposal_check claim;

Welcome. At the outset, I'm sorry for my English :) Please help with configuration Photoshop CS6 appearance. How to disable the background of the program so you can see the desktop. (same menus and tools) Chiałbym to be the same effect as CS5.

Welcome.
At the outset, I'm sorry for my English
Please help with configuration Photoshop CS6 appearance.
How to disable the background of the program so you can see the desktop. (same menus and tools)
i wantto be the same effect as CS5.

Please try turning off
Window > Application Frame

Help with CF9 Standard Install and Mac OS Server (Snow Leopard Server)

Hello,
I recently purchased a mac mini server (with snow leopard server) and will be using it to host my CF9 applications. This install is WAY different than the install needed on a windows machine. I tried to install it once and somehow hosed up Apache and now I can't even get it to start up (apache). So I am having the colo company to do a full restore of the server and I took notes on the Mac Server install and below is the questions I have.
1.) Since Snow Leopard Server comes with Apache webserver, it is what CF wants to use. This is fine, I just need to know where these things are...
It is asking for the Configuration Directory: I'm guessing it is /private/etc/apache2 ? Right or Wrong???
2.) It is asking for Directory and file name of server binary: It currently defaults to /usr/sbin/httpd is this right or should I point it to another directory?
3.) It is asking for Directory and file name of server script: It currently defaults to /usr/sbin/apachectl is this right or should I point it to another directory?
It also wants the location where I can place the CFIDE. Can I place this anywhere I wish or is there a preferred location to point this to?
and finally, I have CF9 Standard, so on the mac server should I install it as a server configuration (self contained instance) or Enterprise Multiserver config. I was reading online that its better to install as an Enterprise Multiserver setup, but I don't know if this will work for me since I'm useing the standard edition.
Please Help ANYONE, if you have mac os experience and installing CF9 onto a mac server
Thanks

I have been getting this exact same problem. CF installer is somehow writing some invalid information into the httpd.conf file. I was able to replace the httpd.conf file with the default one, and was able to go through the webconnector process again and (sometimes randomly) it works. I also spent about 4 hours on the line with adobe CF support and made no progress beyond what I'll post here .
To answer your questions about file locations:
/private/etc/apache2/ for the httpd.conf files
/usr/sbin/ for both the apachectl and the httpd binaries
Although I'm able to get past where you are, and it seems to work correctly, Immediately upon adding a new site via server admin it all breaks. Coldfusion then will only work if I manually go to a cfm document. For example: http://example.com/ will give me the raw text from the (default index) index.cfm file. But typing http://example.com/index.cfm works.
I am lost here as well. After 4 hours on the phone with adobe support I would have hoped it would be an easy fix. I've completely nuked and reinstalled the server from scratch with the exact same results both times.
Does anyone have the slightest clue about what may be going on here?

Installing a VPN Server in Mac OS X

Has anyone tried to install a VPN server successfully in mac os x?
I was able to get webmin installed successfully, and I know on my linux distros webmin automatically detects if a VPN server is installed (such as poptop) or at least if the option is there, but in mac os x (not the server version) there is nothing listed.
Anyone know of any other VPN servers that could be installed in mac os x, or even anything for BSD that could be compiled from source?

I run the server on PowerPC and use clients on both PowerPC and Intel. Admittedly, my wife has run off the the MBP so my use on the Intel is limited these days.
If you want to route onto the network, you'll have to create routes after the TUN/TAP interface is up. The OS X FAQs on OpenVPN detail various ways to do this.
# Sample OpenVPN 2.0 config file for #
# multi-client server. #
# This file is for the server side #
# of a many-clients <-> one-server #
# OpenVPN configuration. #
# OpenVPN also supports #
# single-machine <-> single-machine #
# configurations (See the Examples page #
# on the web site for more info). #
# This config should work on Windows #
# or Linux/BSD systems. Remember on #
# Windows to quote pathnames and use #
# double backslashes, e.g.: #
# "C:\\Program Files\\OpenVPN\\config\\foo.key" #
# Comments are preceded with '#' or ';' #
# Which local IP address should OpenVPN
# listen on? (optional)
;local 192.168.2.253
# Which TCP/UDP port should OpenVPN listen on?
# If you want to run multiple OpenVPN instances
# on the same machine, use a different port
# number for each one. You will need to
# open up this port on your firewall.
port 443
# TCP or UDP server?
;proto tcp
proto tcp
# "dev tun" will create a routed IP tunnel,
# "dev tap" will create an ethernet tunnel.
# Use "dev tap0" if you are ethernet bridging
# and have precreated a tap0 virtual interface
# and bridged it with your ethernet interface.
# If you want to control access policies
# over the VPN, you must create firewall
# rules for the the TUN/TAP interface.
# On non-Windows systems, you can give
# an explicit unit number, such as tun0.
# On Windows, use "dev-node" for this.
# On most systems, the VPN will not function
# unless you partially or fully disable
# the firewall for the TUN/TAP interface.
;dev tap
dev tun
# Windows needs the TAP-Win32 adapter name
# from the Network Connections panel if you
# have more than one. On XP SP2 or higher,
# you may need to selectively disable the
# Windows firewall for the TAP adapter.
# Non-Windows systems usually don't need this.
;dev-node MyTap
# SSL/TLS root certificate (ca), certificate
# (cert), and private key (key). Each client
# and the server must have their own cert and
# key file. The server and all clients will
# use the same ca file.
# See the "easy-rsa" directory for a series
# of scripts for generating RSA certificates
# and private keys. Remember to use
# a unique Common Name for the server
# and each of the client certificates.
# Any X509 key management system can be used.
# OpenVPN can also use a PKCS #12 formatted key file
# (see "pkcs12" directive in man page).
ca /etc/openvpn/key/ca.crt
cert /etc/openvpn/key/server.crt
key /etc/openvpn/key/server.key
# Diffie hellman parameters.
# Generate your own with:
# openssl dhparam -out dh1024.pem 1024
# Substitute 2048 for 1024 if you are using
# 2048 bit keys.
dh /etc/openvpn/key/dh1024.pem
# Configure server mode and supply a VPN subnet
# for OpenVPN to draw client addresses from.
# The server will take 10.8.0.1 for itself,
# the rest will be made available to clients.
# Each client will be able to reach the server
# on 10.8.0.1. Comment this line out if you are
# ethernet bridging. See the man page for more info.
server 169.254.1.0 255.255.255.0
# Maintain a record of client <-> virtual IP address
# associations in this file. If OpenVPN goes down or
# is restarted, reconnecting clients can be assigned
# the same virtual IP address from the pool that was
# previously assigned.
ifconfig-pool-persist ipp.txt
# Configure server mode for ethernet bridging.
# You must first use your OS's bridging capability
# to bridge the TAP interface with the ethernet
# NIC interface. Then you must manually set the
# IP/netmask on the bridge interface, here we
# assume 10.8.0.4/255.255.255.0. Finally we
# must set aside an IP range in this subnet
# (start=10.8.0.50 end=10.8.0.100) to allocate
# to connecting clients. Leave this line commented
# out unless you are ethernet bridging.
;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100
;server-bridge 192.168.2.1 255.255.255.0 192.168.2.240 192.168.2.245
# Push routes to the client to allow it
# to reach other private subnets behind
# the server. Remember that these
# private subnets will also need
# to know to route the OpenVPN client
# address pool (10.8.0.0/255.255.255.0)
# back to the OpenVPN server.
push "route 10.0.0.0 255.255.255.0"
;push "route 192.168.20.0 255.255.255.0"
# To assign specific IP addresses to specific
# clients or if a connecting client has a private
# subnet behind it that should also have VPN access,
# use the subdirectory "ccd" for client-specific
# configuration files (see man page for more info).
# EXAMPLE: Suppose the client
# having the certificate common name "Thelonious"
# also has a small subnet behind his connecting
# machine, such as 192.168.40.128/255.255.255.248.
# First, uncomment out these lines:
;client-config-dir ccd
;route 192.168.40.128 255.255.255.248
# Then create a file ccd/Thelonious with this line:
# iroute 192.168.40.128 255.255.255.248
# This will allow Thelonious' private subnet to
# access the VPN. This example will only work
# if you are routing, not bridging, i.e. you are
# using "dev tun" and "server" directives.
# EXAMPLE: Suppose you want to give
# Thelonious a fixed VPN IP address of 10.9.0.1.
# First uncomment out these lines:
;client-config-dir ccd
;route 10.9.0.0 255.255.255.252
# Then add this line to ccd/Thelonious:
# ifconfig-push 10.9.0.1 10.9.0.2
# Suppose that you want to enable different
# firewall access policies for different groups
# of clients. There are two methods:
# (1) Run multiple OpenVPN daemons, one for each
# group, and firewall the TUN/TAP interface
# for each group/daemon appropriately.
# (2) (Advanced) Create a script to dynamically
# modify the firewall in response to access
# from different clients. See man
# page for more info on learn-address script.
;learn-address ./script
# If enabled, this directive will configure
# all clients to redirect their default
# network gateway through the VPN, causing
# all IP traffic such as web browsing and
# and DNS lookups to go through the VPN
# (The OpenVPN server machine may need to NAT
# the TUN/TAP interface to the internet in
# order for this to work properly).
# CAVEAT: May break client's network config if
# client's local DHCP server packets get routed
# through the tunnel. Solution: make sure
# client's local DHCP server is reachable via
# a more specific route than the default route
# of 0.0.0.0/0.0.0.0.
;push "redirect-gateway"
# Certain Windows-specific network settings
# can be pushed to clients, such as DNS
# or WINS server addresses. CAVEAT:
# http://openvpn.net/faq.html#dhcpcaveats
;push "dhcp-option DNS 10.8.0.1"
;push "dhcp-option WINS 10.8.0.1"
# Uncomment this directive to allow different
# clients to be able to "see" each other.
# By default, clients will only see the server.
# To force clients to only see the server, you
# will also need to appropriately firewall the
# server's TUN/TAP interface.
;client-to-client
# Uncomment this directive if multiple clients
# might connect with the same certificate/key
# files or common names. This is recommended
# only for testing purposes. For production use,
# each client should have its own certificate/key
# pair.
# IF YOU HAVE NOT GENERATED INDIVIDUAL
# CERTIFICATE/KEY PAIRS FOR EACH CLIENT,
# EACH HAVING ITS OWN UNIQUE "COMMON NAME",
# UNCOMMENT THIS LINE OUT.
;duplicate-cn
# The keepalive directive causes ping-like
# messages to be sent back and forth over
# the link so that each side knows when
# the other side has gone down.
# Ping every 10 seconds, assume that remote
# peer is down if no ping received during
# a 120 second time period.
keepalive 10 120
# For extra security beyond that provided
# by SSL/TLS, create an "HMAC firewall"
# to help block DoS attacks and UDP port flooding.
# Generate with:
# openvpn --genkey --secret ta.key
# The server and each client must have
# a copy of this key.
# The second parameter should be '0'
# on the server and '1' on the clients.
;tls-auth ta.key 0 # This file is secret
# Select a cryptographic cipher.
# This config item must be copied to
# the client config file as well.
;cipher BF-CBC # Blowfish (default)
;cipher AES-128-CBC # AES
;cipher DES-EDE3-CBC # Triple-DES
# Enable compression on the VPN link.
# If you enable it here, you must also
# enable it in the client config file.
comp-lzo
# The maximum number of concurrently connected
# clients we want to allow.
;max-clients 100
# It's a good idea to reduce the OpenVPN
# daemon's privileges after initialization.
# You can uncomment this out on
# non-Windows systems.
;user nobody
;group nobody
# The persist options will try to avoid
# accessing certain resources on restart
# that may no longer be accessible because
# of the privilege downgrade.
persist-key
persist-tun
# Output a short status file showing
# current connections, truncated
# and rewritten every minute.
status /var/log/openvpn-status.log
# By default, log messages will go to the syslog (or
# on Windows, if running as a service, they will go to
# the "\Program Files\OpenVPN\log" directory).
# Use log or log-append to override this default.
# "log" will truncate the log file on OpenVPN startup,
# while "log-append" will append to it. Use one
# or the other (but not both).
;log openvpn.log
;log-append openvpn.log
# Set the appropriate level of log
# file verbosity.
# 0 is silent, except for fatal errors
# 4 is reasonable for general usage
# 5 and 6 can help to debug connection problems
# 9 is extremely verbose
verb 3
# Silence repeating messages. At most 20
# sequential messages of the same message
# category will be output to the log.
;mute 20

RV042 with Windows VPN Server

Hi!,
how do I connect the RV042 with an Windows VPN Server,
so that the PC's behind the RV042 get the external IP of the VPN and join the VPN-Server's Network.
I did configure the Windows Server with this tutorial:
http://blog.lan-tech.ca/2012/01/28/sbs-2011-essentials-configuring-vpn-access/
I can connect from any device just fine, so the server is running properly. I just need to know how to connect the RV042 to this VPN.
Kind Regards
penpenpen

Dear Customer,
Thank you for reaching the Small Business Support Community.
Please refer to the below document, I think it is what you are looking for;
http://sbkb.cisco.com/CiscoSB/Loginr.aspx?login=1&pid=2&app=search&vw=1&articleid=2957
Please do not hesitate to reach me back if there is any further assistance I may help you with.
Kind regards,
Jeffrey Rodriguez S. .:|:.:|:.
Cisco Customer Support Engineer
*Please rate the Post so other will know when an answer has been found.

VPN server on Mac OS X client

This may sound crazy,
But is it possible to run the VPN server on a regular Mac OS X Tiger client?
I'd like to run a lightweight server VPN at home to help access my home network from the outside world. But, I don't want to run the full blown OS X server on any of my machines.

The client version of Mac OS X 10.3 and 10.4 contains vpnd, but you will need to set it up yourself; see here and here for information on this task.
(16487)

Help with Netscape enterprise server 6.1 error get_auth_user_ssl

background: I'm not a web admin, I'm a perl coder just put into a place to recode some perl that is not up to standards. Any help would be appriciated, and if you can help solve this, I'd buy you your favorite 6 pack :)
There is this server here Sun5.8 running NES 6.1. All the other servers run apache and aren't having any issues. This one runs NES 6.1 because the data on the server is very restricted to specific groups of people.
Now, before I post for help with tuning this beast, I'd like to get rid of of these error msgs, as I think this is what's causing the slowness on the system. ( just set MaxProcs to 2. It was running just 1 process before)
There are 2 virtual servers set up. foo.com and bar.com (I can't cut and paste across the systems, so I have to type everything by hand.
after a child process admin shuts down, a new process starts up:
warning (pid) in sytemname virtual server https-foo, urlhost foo.com does not match subject "system name" of certificate Server-Cert.
bunch of infos: install new configuration, ready to accept...Java classpath...
all normal
Then paraphrasing
Loading IWSSessionManager by default
IWSSessionManager: max 1000
{Address ...IOTimeout .. MinCGIStubs...CGIStubsTImeout..MaxCGIStubs }
directive ignored
That's when all these
security (PID): get_auth_user_ssl: unable to map cert to LDAP entry. Reason: No such object etc....
The CN it's saying that no such object exists, does exist.
Once it spits out about 10 of these, the page loads or you get
catastrophe (PID): Server crash detected.
At this point, a new session starts up and the user then gets in, or they all start complaining.

plugins (I'm assuming you mean the Init fn's from magnus.conf.. (I'm a newb to all this. LOL )
I hope I don't have any spelling errors here, I have to type it all. The PC i'm on to access the internet is on a different network than the server is on, so no copy and paste..
Init fn="perf-int" enable=true
Init fn="define-perf-bucket" name="cgi-bucket" description="CGI Stats"
Init fn="load-types" mime-types="mime.types"
Init fn="load-modules" shlib="/usr/netscape/servers/bin/https/lib/libNSServletPlugin.so" funcs="NSServletEarlyInit,NSServletLateInit,NSServletNameTrans,NSServletService" shlibs_flags="(global|now)"
Init fn="NSServletEarlyInit" EarlyInit="yes"
Init fn="NSServletLateInit" LateInit="yes"
Init funcs="shtml_init,shtml_send" shlib="/usr/netscape/servers/bin/https/lib/libShtml.so" NativeThread="no" fn="load-modules"
Init LateInit="yes" fn="shtml_init"
Init fn="flex-init" access="$accesslog" format.access="%Ses->client.ip% etc, etc, etc lots more to type... I can type it all if you need it.
Init fn="stats-init" profiling="on"
No core file(s)
./start -version
Netscape Communications
Netscape-Enterprise/6.1SP4 B07/07/2003 02:38

Need help with Flash media server

I am using XAMPP. Now i want to intall Flash media server. How can i configure my apache server to work with flash media server? I dont want to install the apache server coming along with flash media

Hi,
What excactly is the usecase you are trying here? Are using your external Apache to proxy your http traffic from FMS to it or do you want to use http streaming feature of FMS?
If you want to proxy it then use the following document : http://help.adobe.com/en_US/FlashMediaServer/3.5_AdminGuide/WSE2A5A7B9-E118-496f-92F9-E295 038DB7DB.html
Refer Configure HTTP proxying topic in the document.

Can anyone help with clearing space on my Mac Mini, it says the hard drive is full and runs slowly.

Please help, we got the Mac Mini from a family member so it may have his stuff on it but no longer required, we have only put a smal amount of data on it so don't believe we have over filled it. I backed up to a hard drive all photos etc as I thought it may be them filling it, now I cannot even scan a document to it. Is there any way to Defrag it as you can normally do to a windows system as well as either declutter it or restore the whole thing.
Best Regards
Smithy

The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.

Configure VPN Server Cisco 877W

Hello!
I need to implement VPN Server on a Cisco 877W.
The idea is as follows:
Access the network from anywhere using the Cisco VPN Client;
The router need receive a minimum 5 simultaneous connections;
Each User would have a login and password;
Cisco 877W (System image file is "flash: C870-advipservicesk9-mz.150-1.M10.bin")
Following script:
version 15.0
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug uptime
service timestamps log uptime
service password-encryption
service sequence-numbers
hostname VPN
boot-start-marker
boot-end-marker
logging buffered 10240
enable secret PASS@PASS
aaa new-model
aaa authentication login default local
aaa authorization exec default local
aaa session-id common
clock timezone BR -3
dot11 syslog
dot11 ssid ACESSO01
authentication open
authentication key-management wpa
guest-mode
wpa-psk ascii PASS@PASS
no ip source-route
ip dhcp pool ODIM
   import all
   network 192.168.100.224 255.255.255.224
   default-router 192.168.100.254
   dns-server 10.151.176.80 201.10.120.3 10.151.176.79 201.10.1.2
   update arp
ip cef
no ip bootp server
no ip domain lookup
ip domain name local
ip inspect name firewall tcp
ip inspect name firewall udp
ip inspect name firewall cuseeme
ip inspect name firewall h323
ip inspect name firewall rcmd
ip inspect name firewall realaudio
ip inspect name firewall streamworks
ip inspect name firewall vdolive
ip inspect name firewall sqlnet
ip inspect name firewall tftp
ip inspect name firewall ftp
ip inspect name firewall icmp
ip inspect name firewall sip
ip inspect name firewall esmtp max-data 52428800
ip inspect name firewall fragment maximum 256 timeout 1
ip inspect name firewall netshow
ip inspect name firewall rtsp
ip inspect name firewall pptp
ip inspect name firewall skinny
no ipv6 cef
multilink bundle-name authenticated
archive
path flash:config
write-memory
file verify auto
username suporte privilege 15 secret 5 $1$WdPL$PHwugOutS3fztS8hBUl9g0
ip tcp timestamp
ip ssh version 2
bridge irb
interface ATM0
description #### A D S L - INTERNET ####
no ip address
no ip proxy-arp
load-interval 30
no atm ilmi-keepalive
interface ATM0.1 point-to-point
description #### A D S L - INTERNET ####
pvc 0/35
pppoe-client dial-pool-number 1
interface FastEthernet0
description #### I N T R A N E T ####
switchport trunk native vlan 100
switchport mode trunk
load-interval 30
interface FastEthernet1
interface FastEthernet2
interface FastEthernet3
interface Dot11Radio0
no ip address
no ip proxy-arp
load-interval 30
encryption mode ciphers aes-ccm tkip
ssid ACESSO01
speed basic-1.0 basic-2.0 basic-5.5 basic-6.0 basic-9.0 basic-11.0 basic-12.0 basic-18.0 basic-24.0 basic-36.0 basic-48.0 basic-54.0
station-role root
no cdp enable
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Vlan1
description #### ETH`S ####
no ip address
no ip proxy-arp
load-interval 30
bridge-group 1
bridge-group 1 spanning-disabled
interface Vlan100
description #### I N T R A N E T ####
ip address dhcp
no ip proxy-arp
ip nat outside
ip virtual-reassembly
interface Dialer0
description #### I N T E R N E T ####
ip address negotiated
ip access-group Traffic-Permit-IN in
no ip redirects
no ip unreachables
ip mtu 1492
ip nat outside
ip inspect firewall out
ip virtual-reassembly
rate-limit input access-group 100 16000 8000 8000 conform-action transmit exceed-action drop
encapsulation ppp
load-interval 30
dialer pool 1
dialer-group 1
ppp authentication pap chap callin
ppp chap hostname user@user
ppp chap password pass@pass
ppp pap sent-username user@user password pass@pass
ppp ipcp dns request
ppp ipcp wins request
ppp ipcp route default
no cdp enable
interface BVI1
description #### BRIDGE Vlan1/Dot11Radio0 ####
ip address 192.168.100.254 255.255.255.224
no ip proxy-arp
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1452
ip policy route-map PBR
ip forward-protocol nd
no ip http server
no ip http secure-server
ip nat inside source route-map ADSL interface Dialer0 overload
ip nat inside source route-map INTRANET interface Vlan100 overload
ip route 0.0.0.0 0.0.0.0 Dialer0 name ADSL
ip route 0.0.0.0 0.0.0.0 10.48.50.1 name INTRANET
ip access-list extended ADSL
deny   ip any 10.0.0.0 0.255.255.255
permit ip any any
deny   ip any host 192.168.100.255
deny   udp any any eq tftp log
deny   ip any 0.0.0.0 0.255.255.255 log
deny   ip any 127.0.0.0 0.255.255.255 log
deny   ip any 169.254.0.0 0.0.255.255 log
deny   ip any 172.16.0.0 0.15.255.255 log
deny   ip any 192.0.2.0 0.0.0.255 log
deny   ip any 192.168.0.0 0.0.255.255 log
deny   ip any 198.18.0.0 0.1.255.255 log
deny   udp any any eq 135 log
deny   tcp any any eq 135 log
deny   udp any any eq netbios-ns log
deny   udp any any eq netbios-dgm log
deny   tcp any any eq 445 log
deny   ip any any log
ip access-list extended INTRANET
permit ip any 10.0.0.0 0.255.255.255
deny   ip any any
deny   ip any host 10.48.50.255
deny   udp any any eq tftp log
deny   ip any 0.0.0.0 0.255.255.255 log
deny   ip any 10.0.0.0 0.255.255.255 log
deny   ip any 127.0.0.0 0.255.255.255 log
deny   ip any 169.254.0.0 0.0.255.255 log
deny   ip any 172.16.0.0 0.15.255.255 log
deny   ip any 192.0.2.0 0.0.0.255 log
deny   ip any 192.168.0.0 0.0.255.255 log
deny   ip any 198.18.0.0 0.1.255.255 log
deny   udp any any eq 135 log
deny   tcp any any eq 135 log
deny   udp any any eq netbios-ns log
deny   udp any any eq netbios-dgm log
deny   tcp any any eq 445 log
ip access-list extended Traffic-Permit-IN
deny   ip 0.0.0.0 0.255.255.255 any
deny   ip 10.0.0.0 0.255.255.255 any
deny   ip 127.0.0.0 0.255.255.255 any
deny   ip 169.254.0.0 0.0.255.255 any
deny   ip 172.16.0.0 0.15.255.255 any
deny   ip 192.0.2.0 0.0.0.255 any
deny   ip 192.168.0.0 0.0.255.255 any
deny   ip 198.18.0.0 0.1.255.255 any
deny   ip 224.0.0.0 0.15.255.255 any
deny   ip any host 255.255.255.255
permit tcp any any eq 1723
permit gre any any
deny   icmp any any echo
deny   ip any any log
access-list 100 permit icmp any any echo-reply
access-list 100 permit icmp any any echo
access-list 110 permit ip 192.168.100.224 0.0.0.31 any
dialer-list 1 protocol ip permit
no cdp run
route-map ADSL permit 10
match ip address 110
match interface Dialer0
route-map INTRANET permit 10
match ip address 110
match interface Vlan100
route-map PBR permit 10
match ip address ADSL
set interface Dialer0
route-map PBR permit 20
match ip address INTRANET
set interface Vlan100
control-plane
bridge 1 route ip
line con 0
no modem enable
line aux 0
line vty 0 4
transport input telnet ssh
scheduler max-task-time 5000
end

Some Help?

Help with installing CS3 on new Mac

Recently purchased new Macs for the department. Cannot install CS3! It asks for the CS2 license number which we have. Turns out it doesn't recognize it. Called customer support and everyone had the same answer, but no solution. I purchased the CS2 corporate license when we had about 6 Macs. Now, we're down to 3 so I purchased the CS3 as individual suites. They said there is no workaround with getting CS3 to recognize the CS2 license! We called 4 different times and talked to 4 different reps who gave us all the same broken-record response. Any help with be greatly appreciated!

I believe that is essential what the customer service folks were telling my designer. However, both was installed before on the old Macs (CS2 corporate licensed and CS3 individual license) - that's the odd thing, is that it worked before on an older system. All we did was buy new hardware.
I hope this isn't Adobe's way of making us upgrade to CS4 - lol!

Help with configuration vpn server on mac os

Similar Messages

Maybe you are looking for