Help with CS4 and fireworks

Hey all, running out of time I am trying to set up a website for my sons baseball team this spring and I am in a little bit of a pickle. I am using DW CS4 and I have set up a slide show in fireworks CS4 as well, when I create the slideshow and test in a browser it works with no problem. Here is where the issue comes in to play, I create a sideshow using the the (player-black flash and when I import it into dreamweaver and set it up on my page I save the page and when I test I have no pictures show up. (I have included a screen shot) of what happens. I have tried different type of players and they all do the same thing. I have watched videos on how to import the slide show into dw and as far as I know that is not the problem. I have downloaded the most current version of adobe flash player but still no luck. And this is the one thing that everybody wants more than anything the pictures of games. Can anyone give me some help or suggestions, I have downloaded a software called visual sideshow, but I like the way fireworks looks and I plan on adding more slides as the year goes on. For what it is worth I have the copy of Adobe master collection CS4, but being new to web design and watching videos on fireworks it seem to be the easiest to learn. Can anyone give me some feed back on what I may be doing wrong. By the way I am using Win7 if that matters any
Thanks,

Fireworks is not the ideal solution for slideshows. Creating images, yes.
For a slideshow have a look hete http://forums.adobe.com/thread/1144742

Similar Messages

Having trouble with Dreamweaver and fireworks willing to pay for support

I'm new to the forum and i was hoping to get some help with
dreamweaver and fireworks.
I built a site on my own using dreamweaver 3 years ago but
have forgotten almost everything. I am planning on building a new
web site and have been messing with dreamweaver for over a week
trying to figure it out, with little success. I bought a web
building package years ago that included fireworks, dreamweaver,
freehand and maybe more, but i lost my books on dreamweaver and
fireworks somehow.
Anyways, I was trying to learn dreamweaver 3 and fireworks
and was having a lot of trouble with it. The dreamweaver bible
assumes you know how to make a navigation bar using fireworks and
that simply isnt the case for me. So I need help with that.
Also, i have been having trouble with my template. This is
how you save your basic page correct? For some reason it doesnt
save the whole page for me. I figured out the editable regions
part, I think, but since i didnt know how to make a navigation bar
I made my own links out of text, and this part isnt saving with the
template.
I have a lot more questions but i think ive taken enough of
your time. I am willing to pay someone to help me build this site,
i cant afford a lot but i think my questions are pretty basic.
Thanks

There is a recent thread on the FW forum that may interest
you - it's called
"Firworks and HTML". The advice there applies in your case,
too.
One problem with your use of DW3 is this -
the browser world has changed quite a bit in the almost 10
years since DW3
was released. Some (many?) of the behaviors in DW3 simply
won't work any
more because of these (significant) changes. Are you
absolutely locked into
using DW3?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"jfmalewitz" <[email protected]> wrote in
message
news:[email protected]...
> I'm new to the forum and i was hoping to get some help
with dreamweaver
> and
> fireworks.
> I built a site on my own using dreamweaver 3 years ago
but have forgotten
> almost everything. I am planning on building a new web
site and have been
> messing with dreamweaver for over a week trying to
figure it out, with
> little
> success. I bought a web building package years ago that
included
> fireworks,
> dreamweaver, freehand and maybe more, but i lost my
books on dreamweaver
> and
> fireworks somehow.
> Anyways, I was trying to learn dreamweaver 3 and
fireworks and was having
> a
> lot of trouble with it. The dreamweaver bible assumes
you know how to make
> a
> navigation bar using fireworks and that simply isnt the
case for me. So I
> need
> help with that.
> Also, i have been having trouble with my template. This
is how you save
> your
> basic page correct? For some reason it doesnt save the
whole page for me.
> I
> figured out the editable regions part, I think, but
since i didnt know how
> to
> make a navigation bar I made my own links out of text,
and this part isnt
> saving with the template.
> I have a lot more questions but i think ive taken enough
of your time. I
> am
> willing to pay someone to help me build this site, i
cant afford a lot but
> i
> think my questions are pretty basic.
> Thanks
>

Help with PS and HDR Effect Pro from Nik

I altready have a help request into Nik Software, but was hoping someone here could offer some suggestions.
I'm running the Nik Complete software program on Win 7 64Bit, Raid 5 machine. 8800 GTS 512 MB card; 12gb of RAM, i7 quad core, 2.67 GH, PS CS5 and Lightroom 3.2, Wacom Intuos 3 tablet.
I have the most updated drivers for video, wacom tablet. OS is current with updates. PS CS5 is updated, but I am NOT running Lightroom's 3.3 RC.
I updated all software updates for the NIK software collection from their site and still have the same problem even after uninstall and re-install.
When I attempt to run HDR Efect Pro I get the menu window to select my images, click ok and with in seconds I get the message that Adobe Photoshop CS5 has stoopped working and must close...
I've gone to their site and looked into their FAQ/troubleshooting and did all their recommendations, update drivers, look for color profiles with 0 Bytes in the system color spool for both 32 and 64 bit apps and still no luck. This also happens with CS4 and CS3 and if I attempt to use the program form Lightroom and Bridge. Any ideas, work arounds, suggestions? Their automatic reply from my support request says 2-3 days due to the high populaity of their program!!!
Thanks for any and all help.

Outside of suggesting some pretty generic things, I can't offer much help... I don't use Nik products myself
You could try disabling the "Use OpenGL Drawing" setting in Photoshop as a workaround to see if that helps. Perhaps between Photoshop and the plug-in problems are being caused in the OpenGL driver for your particular video card.
Also, given that 3rd party plug-ins and Photoshop could be competing for memory, you could try changing the amount of memory Photoshop is allowed to use in the Edit - Preferences - Performance dialog.
Good luck.
-Noel

Need help with CS4 transitions

Hi,
I am trying to use a cross dissolve transition. To make it simple, I have two clips. I'm obviously doing something wrong here. I've watched the Adobe TV tutorial and all the guy does is to select cross dissolve from the effects box, and drags it over to the clip on the timeline. I think I am doing the exact same thing, but when I play my clip back, I can see no transition effect played back.
Maybe I'm putting it in the wrong place I thought, so I tried putting it in front of the split between the two clips. Then again at the beginning of the second clip. Neither of them worked, so I shut CS4 down, and booted it up again. I started a new project, and put two new clips in it. I put the dissolve transition at the beginning of the second clip, and it worked like a charm. Then to see if that was a fluke, went to a point about 3 minutes earlier in the timeline. So now I am on clip one. I go and make a cut in the timeline, and try to place another Cross dissolve at this spot. It appears to place the transition there because it creates the rectangular box, and it has the name cross dissolve in that rectangular box,but when I try to play it to see the transition, it isn't working. Go back to the beginning of the second clip, and that one still works perfectly.
I noticed that there is a difference in the appearance of the two cross dissolve rectangular boxes. The one that works has a single diagonal line that goes from lower left to upper right in the cross dissolve box, and then there are a whole series of diagonal lines that go from upper left to lower right all across the cross dissolve box . It looks like a whole bunch of dark gray and white backslashes. In the one that doesn't work, there is just that single diagonal line that goes from lower left to upper right. No backslashes on this one. What am I doing right in the first one, but not in the second?
I find that it will work perfectly if I put in a new clip. If I put in the Cross Dissolve at the beginning of a new clip that I add to the timelime, it will work perfectly. It is only when I try to split a clip that is already on the timeline, and then put the cross dissolve in at that point.
Perhaps it is not possible to do what I am attempting to do. Maybe you can't split a clip and place the transition at that point?

When I am shooting video, it is not unusual for me to be taping a scene of a mountain, for example, and then put the camera on pause, while I briefly position myself to take video of the river that is flowing at my feet. That is what is happened on this clip that I am attempting to put the transition in between. Rather than having the scene just instantly change at this point, from the mountain to the river, it would be nice to have a smoother transition then that.
My mind was working on the problem while sleeping last night, and I think I might understand how to handle it. It might have been too simple for me to think about yesterday. I haven't tried it yet, but would it not work, to insert the mountain scene from my source monitor into the timeline, and then go back and insert the river scene into the time line instead of inserting both of them at the same time. Would these not now be two separate clips on the timeline, and the transition could now be applied?
Your analogy with the DJ is very good, but it isn't quite the same. You are correct in that he would be only fading from one song to the same spot on the same song. In my case I am going from an image of a mountain to an image of a river. Same clip, but different images. I appreciate the help, and your thoughts.
Terry Lee Martin
Date: Sat, 22 Aug 2009 23:15:55 -0600
From: [email protected]
To: [email protected]
Subject: Need help with CS4 transitions
From a creative standpoiint, I don't understand the desire to transition from one clip to the exact same spot on that same clip. That's like a DJ at a night club fading from one song to the exact same spot on that same song being played on a second CD player. What's the point?
>

Help with writing and retrieving data from a table field with type "LCHR"

Hi Experts,
I need help with writing and reading data from a database table field which has a type of "LCHR". I have given an example of the original code but don't know what to change it to in order to fix it and still read in the original data that's stored in the LCHR field.
Basically we have two Function modules, one that saves list data to a database table and one that reads in this data. Both Function modules have an identicle table which has an array of fields from type INT4, CHAR, and type P. The INT4 field is the first one.
Incidentally this worked in the 4.7 non-unicode system but is now dumping in the new ECC6 Unicode system.
Thanks in advance,
C
SAVING THE LIST DATA TO DB
DATA: L_WA(800).
LOOP AT T_TAB into L_WA.
ZDBTAB-DATALEN = STRLEN( L_WA ).
MOVE: L_WA to ZDBTAB-RAWDATA.
ZDBTAB-LINENUM = SY-TABIX.
INSERT ZDBTAB.
READING THE DATA FROM DB
DATA: BEGIN OF T_DATA,
             SEQNR type ZDBTAB-LINENUM,
             DATA type ZDBTAB-RAWDATA,
           END OF T_TAB.
Select the data.
SELECT linenum rawdata from ZDBTAB into table T_DATA
     WHERE repid = w_repname
     AND rundate = w_rundate
     ORDER BY linenum.
Populate calling Internal Table.
LOOP AT T-DATA.
APPEND T_DATA to T_TAB.
ENDLOOP.

Hi Anuj,
The unicode flag is active.
When I run our report and then to try and save the list data a dump is happening at the following point
LOOP AT T_TAB into L_WA.
As I say, T_TAB consists of different fields and field types whereas L_WA is CHAR 800. The dump mentions UC_OBJECTS_NOT_CONVERTIBLE
When I try to load a saved list the dump is happening at the following point
APPEND T_DATA-RAWDATA to T_TAB.
T_DATA-RAWDATA is type LCHR and T_TAB consists of different fields and field types.
In both examples the dumps mention UC_OBJECTS_NOT_CONVERTIBLE
Regards
C

Can I take a frame from my project and use it as a custom menu background with CS4 and its Encore

My project is edited in CS4.
I moved it to Encore CS4.
I don't want to use any of the supplied menu templates in CS4 Encore.
I was hoping CS4 would be all I needed to create custom menus using scenes from my project.
My question is: Can I take a frame from my project and use it as a custom menu background with CS4 and its built in Encore or do I need some other element from the Adobe catalog to make these custom chapter menus and sub-menus?
Thanks Jim

OK, I'm back. Here are my steps for creating Custom Menus with PS, En and PrPro:
In PrPro, move the CTI (Current Time Indicator) to the desired Frame. Check Frames on either side, with the Program Monitor’s Magnification to 100%, or maybe even 200% (you’ll need to scroll, but get a really clear picture). You want the clearest Frame in that area. With AME, in CS4, you’ll want to Export that Frame as .TIFF, or .BMP. I use .TIFF for this.
Now, for a caveat. When you Import this Exported Frame into Photoshop, be sure to check the specs., especially the PAR. You may have to use Image>PAR to adjust this to match your Project’s specs. Or, all might be perfect - just check this out.
Now, at this point, I choose the Library Menu, Blank, so that everything is setup. One can create the Menu from scratch, but careful attention needs to be paid to the exact naming conventions. At the very least, unless you’ve done this dozens of times before, use that Blank Menu, or similar as a guide, so you get things done, as they must be done.
Using that Blank Menu, just drag the Layer from your Exported Frame to your Menu image. It will appear above the black Background.
Add, or manipulate your Button Layer Sets, as is required, keeping them together. Remember that Button #1 will be the Button Layer Set, that is lower down in the Layers Palette. This can play a roll with Button Routing, back in Encore. Lower Button Layer Sets will have lower Button numbers.
Now, I always rename my Button Layer Sets, keeping the required characters - just changing the name. I also do all of my Button text in PS, and make sure to turn OFF Sync Button Names.
When done, Save_As .PSD, and then Import_As_Menu into Encore. Note: if you start with the Blank Menu, you can choose Edit in Photoshop, and then when done in PS, you just need to Save, and it will update in Encore. This is a personal workflow choice. I do the Edit in Photoshop route, but it is not necessary. One just needs to Import the resulting .PSD into Encore with Import_As_Menu, so that Encore does all the things that it needs to and recognizes the .PSD as a Menu.
When deciding what to base your Menu on, remember that you can "populate" your Menu with Buttons from the Functional Content. I’d suggest studying these Assets, and picking the ones that work best for you. You can still alter/edit those back in PS, so you just need to "get close."
Pay special attention to the required naming conventions. You cannot deviate from those first characters in the Button Layer Sets. They MUST be followed.
If you have any questions, do not hesitate to ask.
Good luck,
Hunt

Using Adobe PhotoShop CS4, I cannot add text to a new layer. It was always a snap with previous versions of OS 10. Has anyone else noticed issues with CS4 and Lion? Many thanks in advance. Pete Hendricks

Using Adobe PhotoShop CS4, I cannot add text to a new layer. It was always a snap with previous versions of OS 10. Has anyone else noticed issues with CS4 and Lion? Many thanks in advance. Pete Hendricks

Happy to report that iTunes Match has returned to working like normal on iTunes 10.7 on my computer today. If any iTunes engineers read this thread, I really appreciate the fix.
Has it returned to normal for you?

Help with count and sum query

Hi I am using oracle 10g. Trying to aggregate duplicate count records. I have so far:
SELECT 'ST' LEDGER,
CASE
WHEN c.Category = 'E' THEN 'Headcount Exempt'
ELSE 'Headcount Non-Exempt'
END
ACCOUNTS,
CASE WHEN a.COMPANY = 'ZEE' THEN 'OH' ELSE 'NA' END MARKET,
'MARCH_12' AS PERIOD,
COUNT (a.empl_id) head_count
FROM essbase.employee_pubinfo a
LEFT OUTER JOIN MMS_DIST_COPY b
ON a.cost_ctr = TRIM (b.bu)
INNER JOIN MMS_GL_PAY_GROUPS c
ON a.pay_group = c.group_code
WHERE a.employee_status IN ('A', 'L', 'P', 'S')
AND FISCAL_YEAR = '2012'
AND FISCAL_MONTH = 'MARCH'
GROUP BY a.company,
b.district,
a.cost_ctr,
c.category,
a.fiscal_month,
a.fiscal_year;
which gives me same rows with different head_counts. I am trying to combine the same rows as a total (one record). Do I use a subquery?

Hi,
Whenever you have a problem, please post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) from all tables involved.
Also post the results you want from that data, and an explanation of how you get those results from that data, with specific examples.
user610131 wrote:
... which gives me same rows with different head_counts.If they have different head_counts, then the rows are not the same.
I am trying to combine the same rows as a total (one record). Do I use a subquery?Maybe. It's more likely that you need a different GROUP BY clause, since the GROUP BY clause determines how many rows of output there will be. I'll be able to say more after you post the sample data, results, and explanation.
You may want both a sub-query and a different GROUP BY clause. For example:
WITH    got_group_by_columns     AS
     SELECT a.empl_id
     ,     CASE
                    WHEN c.category = 'E'
              THEN 'Headcount Exempt'
                    ELSE 'Headcount Non-Exempt'
            END          AS accounts
     ,      CASE
                    WHEN a.company = 'ZEE'
                    THEN 'OH'
                    ELSE 'NA'
            END          AS market
     FROM              essbase.employee_pubinfo a
     LEFT OUTER JOIN mms_dist_copy             b ON   a.cost_ctr     = TRIM (b.bu)
     INNER JOIN       mms_gl_pay_groups        c ON   a.pay_group      = c.group_code
     WHERE     a.employee_status     IN ('A', 'L', 'P', 'S')
     AND        fiscal_year           = '2012'
     AND        fiscal_month          = 'MARCH'
SELECT    'ST'               AS ledger
,       accounts
,       market
,       'MARCH_12'          AS period
,       COUNT (empl_id)      AS head_count
FROM       got_group_by_columns
GROUP BY accounts
,            market
;But that's just a wild guess.
You said you wanted "Help with count and sum". I see the COUNT, but what do you want with SUM? No doubt this will be clearer after you post the sample data and results.
Edited by: Frank Kulash on Apr 4, 2012 5:31 PM

MOVED: [Athlon64] Need Help with X64 and Promise 20378

This topic has been moved to Operating Systems.
[Athlon64] Need Help with X64 and Promise 20378

I'm moving this the the Administration Forum. It seems more apporpiate there.

Help with bridge and cs4

I was using CS4 and didn't like bridge so I uninstalled it and now I want to use it again but cannot get it to reinstall properly. I even uninstalled the whole adobe CS4 extended suite and reinstalled and still cannot get it to open. Help Please!

44jenni wrote:
…Held down option key when it was opening and it reset system preferences…
Hehehehe…
That reset Photoshop's preferences files, not "system preferences".

Help with N8 and Adobe Premiere?

Hi, I am using Adobe Premiere Pro CS4 v4.1.0.
I recently got a Nokia N8 and am now trying to edit the video recordings, but am having some problems.
The phone records at 25fps 1280x720 using H.264 MPEG-4 codec, with sound in Stereo 130kbps 48 kHz.
When I create a project and load the .mp4 file into it, the first problem I see is that it reads it as 500fps and the video is only a second or 2 long.
I then interpret the footage to the correct 25fps, and the video then works fine. However, the sound seems to not be there.
I've noticed that due to Premiere interpreting it as 500fps, it thus only plays the first second or two of the sound when left as 500fps and plays all the video in that second or two, and thus when changing to the correct 25fps, it is therefore only the two seconds playing over the entire minute of video.
I also tried changing the file into other formats. The only other one that kind of worked was .mov. It allowed the sound to work perfectly, the video loaded at correct frames, however, when playing the video on premiere, it then showed black screen for most of the clip.
Have tried to find out about this online and installed a couple different codec packs and media players, but nothing helped with this problem in Adobe Premiere. However, the clip played fine in the media players, such as RealPlayer.
If anyone has any advice on this, it would be appreciated. I would prefer to fix this issue correctly rather than have to manually interpret or transcode the footage each time I want to edit it.
Btw, I also posted this question on a forum with Nokia N8 Users, and others also tried it out and had same or similar issues. They also tried on CS5 and it still didn't work.
*UPDATE* I just tested again to change the file from .mp4 to .mov by simply renaming it, and this time it loaded perfectly into Premiere. However, I have to do this on my XP computer, as my Windows 7 doesn't change the format of file by simply renaming it. Hence, I would still like help with getting it to recognise the .mp4 correctly though in the first place, rather than having to rename my files each time on the XP computer.

Moshpit84 did you utilize the uninstallers located in Applications/Utilities/Adobe Installers to remove your installation of Premiere Pro? Also what version of the Adobe Application Manager are you currently using?

Contribute 6.5 can not ftp after years of no issues with CS4 and CS5

The problem
Contribute 6.5 can not connect via ftp using settings that formerly worked (and still do) in CS4 and CS5.
How we ended up here
I am the administrator website where
Our content editors have been using Contribute CS 4 and Contribute CS 5 without issue, 6+ years.
We are trying to upgrade to CS 6.5 to better support HTML5 markup now used within the site.
When attempting to configure a website connection in 6.5, Contribute alerts:
"Contribute cannot find the website files on the server. Please contact the website's administrator for assistance."
After closing the dialog box the failed connection is removed from contributes website connection list.
We have a shared hosting account and utilize ftp to publish changes.
Server is Win2008 with IIS 7.5
Again it's shared hosting, so read/write ftp are scoped to our account's directory.
We attempted this on serveral pcs including on a PC with a fresh install of Windows 7.
We can still connect successfully via ftp with CS4, CS5, dreamweaver, and Filezilla.
Which is why I believe this to be a Contribute 6.5 issue.
I've attempted the following troubleshooting articles:
Use network I/O logging to log operations, identify problems
I compared the I/O logging for both CS5 and CS 6.5 which both appear to log the same diagnostic steps.
Contribute FTP Server Checker (quite dated)
All successes reported. No failures.
Troubleshooting a Connection CS4 (linked from with CS 6.5's help UI)
As indicated above, alternate FTP clients have no issue.
This appears to be similar issue to the following posts:
5301620 - HELP - FTP Connection Error with Contribute 6.5
5907180 - Contribute 6.5 can no longer connect to sites ...
Unfortunately, there has been no solutions posted on either of these threads.
Any help would be greatly appreciated.
I can PM the network I/O log details if there is adobe staff who can get them in the right hands.
(Again the logs only show successes.)

@Zaldomoh
Have you found a solution or been given assistance from Adobe to resolve this issue? I'm having the same problem (CS 6.5 ftp'ing to a shared hosting enviroment). Details of our situation can be found on thread 1384686

CS3 script runs slow with CS4 and CS5

I have written a table transformation script for InDesign CS3, which formats an imported Excel table.
With InDesign CS3 the script runs well. Now I tried the same script with InDesign CS4 and CS5 and it runs very slow. It's about 10 times slower than with CS3.
I tried to turn off redrawing, but this didn't help. It even got slower again!
Does someone has made similar experiences? Could you solve the performance issue?
Do scripts in CS4/CS5 generally run slower than in CS3?
Does CS4 differ so much to CS3 that the script runs 10 times slower?
What can I do to improve the execution performance?
Thanks for any tips / advices etc.

I now have made some tests with profile / timing. Here are the results.
you find the code snipped below. It iterates first over all rows and then over all cells inside of the row. In the cell iteration, the function hasGapInLineBelow(...) does more iterations.
The example is with a table of 42 rows and 9 cells.
I have compared CS3 and CS5
there are 3 test cases:
for 1/1 means: first for-loop is in iteration 1 and second for loop is in iteration 1 (statements for first row and first cell done)
for 1/9 means: first for-loop is in iteration 1 and second for loop is in iteration 9 (statements for first row and all 9 cells of the row done)
for 2/9 means: first for-loop is in iteration 2 and second for loop is in iteration 2 (statements for second row and all 9 cells of the row done)
it's strange that normal variable assignments take lot of time (like the statement startPos = indexLeftNeightbourOfCurrentCell;) -> I don't understand why this can be so time consuming!?!
it's also strange why in "for 1/9" and "for 2/9" variable assignments take much longer than in "for 1/1"...
could I use another data type than array for the variable isMergedRow? Which one?
do you know any performance optimizations?
in which time unit ExtendScript Toolkit shows the measured periods?
how are the times calculated in loops? Are these the times sumed up over all iterations or is it just the time for a single statement?

Trouble Printing with CS4 and Epson

I wish to print a 13x19 photo on my Epson Photo Stylus R3000. After entering all the info correctly with paper size, type, quality, etc I get a print with a one inch blank border on the top and bottom. I called Epson and they said it was not their problem, it must be something with Adobe. I am using Photoshop CS4 and Windows 7. Help, please. Doro

So, I found this little piece of info on Epson's site, the question doesn't quite match our problem, but the answer (you would think) would fix us...
Q: I don’t see my printer driver on the Epson Macintosh Snow Leopard Support page. Where can I find a Mac OS 10.6.x driver for my product?
A: Try the following:
Rosetta needs to be installed in Snow Leopard. If necessary, install Rosetta.
Go to Drivers & Support, select your product category, then select your product name.
Select Drivers & Downloads, then select Macintosh Operating Systems from the drop-down list and click Go.
Download the Macintosh 10.5.x drivers for your product.
Note: If there are no Macintosh OS X 10.5.x drivers available for your product, download and install the Macintosh OS X 10.4.x drivers and the Common Updater software for your product.
Follow the on screen instructions to finish the driver installation.
I followed the instructions to the letter.... no results, I still don't see the driver in the drop-down list of available Printer Drivers!

Photomerge problems with CS4 and CS5

I am having all kinds of sudden problems with Photomerge that I never had before (with CS4). I do very big files and have multiprocessor MacPro and 16 gigs of RAM and whether I use CS4 interactive or CS5 with the Ul plugin in 32 bit Photoshop is just crashing half way through the operations. I am very annoyed that the new CS5 does not have interactive in 64 bit as any automatic function almost never does the merge properly. But at the moment nothing is working with either Photoshop.
Any ideas and will Adobe implement interactive in photomerge in 64 bit? I am a professional doing large scale pieced-together murals and need the interactive mode and in 64 bit to utilize all the RAM and the ability of the architecture of the system.

Some Win7 reading
Win7 Help http://social.technet.microsoft.com/Forums/en-US/category/w7itpro/
Win7 Configuration Article http://windowssecrets.com:80/comp/100218
Win7 Monitor http://windowssecrets.com:80/comp/100304
Win7 Optimizing http://www.blackviper.com/Windows_7/servicecfg.htm
Win7 Adobe Notes http://kb2.adobe.com/cps/508/cpsid_50853.html#tech
Win7 Adobe Update Server Problem http://forums.adobe.com/thread/586346?tstart=0
Win7 Photoshop http://forums.adobe.com/thread/511916?tstart=0
Processes http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx
Also hardware setup
A link with many ideas about computer setup http://forums.adobe.com/thread/436215?tstart=0

Help with CS4 and fireworks

Similar Messages

Maybe you are looking for