Help with (forte for Java CE) please

I had installed forte for Java CE and had recieved some problems. After I installed the program and tried to run it it said this error.
Cannot load c:\j2sdk1~1.1_0\jre\bin\classic\jvm.dll
Bacicly why I installed forte was for the debugger part. Jedit doesn't seem to work for me. I'm using windows xp home edition.
Any help would be great
Thanks in advance
George

Try downloading a newer SDK and getting
c:\j2sdk1~1.1_0\jre\bin
out of the path

Similar Messages

Help with Forte: very simple question, please help!

I recently downloaded the community version of Forte (Sun One) but can't seem to get any new empty class programs to execute properly. I know something is probably not set up right, which is why I really need a little help to get started. Regardless of the code I try to execute, the output error is always:
"java.lang.NoClassDefFoundError: (name of program)
Exception in thread "main" "
Please let me know what I'm not doing right. I would really appreciate anybody's thoughts on this problem because I would love to get Forte working so I can start learning Java. Thanks for your input!

I would tell you that Forte is not a tool for the beginner. you should look at something simpler. Forte is a fully integrated development environment. I would look at a simple editor like emacs, available at gnu.org. The commands of this editor are quite difficult to get use to.
As for setting the class varialbe. It depends on the O/s that you are using. win98/me is different than NT/xp. Need to know one or the other before explaining.
email me if you have question. email address is in my profile.

Need serious help with quicktime for windows. PLEASE HELP!!! : (

So i had quicktime on my windows program list and have had it since i bought the computer back in 08' well i got it back from a pawn shop after being down on my luck and they wiped everything out. ever since then i have been uploading pics and videos from my digital camera and the pics are fine but alot of the vids that i have put on here cannot be viewed and when i try to watch them i get an error message saying i need the latest version of quicktime. so i have tried uninstalling it after many failed update attemtps and i cannot get it to uninstall i have tried everything imaginable, from windows utility cleanup to removing it in add/remove programs to just deleting the files in the program list folder. Nothing. i get a prompt saying "the feature you are trying to use is on a resource that is unavailable." and then it goes on to say.. "Click ok to try again or enter an alternate path to a folder containing the installation package 'quicktime.msi' in the box below." and it already has two diffrent paths located in the entry box and i have tried them both and it keeps giving me the same message as i posted above. i am so lost and it dont help that i dont really know a whole lot about computers. i am stuck between a rock and a hard place.any input would be greatly appreciated. thanks!

i get a prompt saying "the feature you are trying to use is on a resource that is unavailable." and then it goes on to say.. "Click ok to try again or enter an alternate path to a folder containing the installation package 'quicktime.msi' in the box below."
Unfortunately, these sorts of msi-related troubles have gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing QuickTime again. Does the install go through properly this time?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

Help with iVPN for total novice please

Hello,
I am a total VPN novice so I may be doing something stupid here. I have a Mac Air running Mac OS X 10.6.7. I downloaded iVPN tonight. I've put it in the Applications folder and started it up.
I'm trying to create a VPN using L2TP. I've got a time capsule as a router, I've setup DHCP so that my MacAir is always given the address 192.168.0.3 and then I've forwarded the ports 500, 1701 and 4500
to this IP address. For the time being I have the firewall switched off but to be fair I'd rather have it on.
Using iVPN I've set the IP address range for clients to 192.168.0.10 - 192.168.0.20.
I then hit start in IVPN but the server always shows status OFF.
I've checked Activity monitor and vpnd and racoon are running. If I look at the log for vpnd is says listening for connections but it never sees any.
I've tried to connect to the vpn but it won't respond. I've tried ping-ing the server ip address but get no response.
Any help greatly appreciated, if I need to provide more info let me know and if I come across as very daft then it is because I am. I am loving trying to teach myself this stuff but right now I think my brain is going to melt!
Thanks.
Jenni

What are your goals here? Getting access to disk storage on your TC? That won't work via a VPN, as you don't have a way to terminate the VPN connection on your TC, and you probably don't have anything else on your LAN that can back-connect to the TC.
Are you running Mac OS X Server 10.5 here, as is implied by the choice of forum? (Or are you trying to activate an in-bound VPN into this MacBook Air running Mac OS X client software? Or into the TC?) And is this 10.5 or 10.6 you're running?
It's not easily feasible to test VPNs locally (from hosts operating in the same IP subnet), and connecting from the client box to itself is unlikely to work.
If you want to use VPNs, reconfigure your local network out of the 192.168.0.0/24 and 192.168.1.0/24 subnets, as those are ubiquitous, and having the same subnet on both ends of the VPN connection will trigger IP routing issues.
FWIW, It's far easier to configure a VPN into a firewall gateway box (one with VPN capabilities, and this is something which the Airport and Time Capsule series devices lack), and (for your sort of usage) PPTP and L2TP clients (built into Mac OS X 10.5 and 10.6) are the easiest approaches. From that, you can VPN connect to the gateway (in front of your TC) and can then access the TC as if you were local to your network.

Help with CyberX3D for Java

hello i'm trying to work with cyberX3d from satoshi konno but i couldn't work with it. the only thing that i obtain when i try to use it is a black java screen and i can't close it, i have to close it from the console of the sotware Together.

Hey I'm finding and trying to use CyberX3D, too. But it's dissapear!!! i cannot view and download it from it's home page!!!
Can you send me this package via email ??!!!!
I'm hearing from you~!!! Thanks in advance!!!!! :-)

Need some help with tools for java projects

Hi Friends,
I just want to know what software release management tool do you use.Is there any free tool available on net??
I do not need a subversion tool( cvs,svn etc) or a automation build tool ( luntbuild, cruisecontrol, anthill) , I am looking for some tool,that helps you manage the release after its made.For example,i would like to track down which release was made to which customer on which date,how many releases were made to any particular customer,what source code was shipped to the customer..and so on....
Is there any such tool that can accomplish this???
Thanks

Hi Friends,
I just want to know what software release management tool do you use.Is there any free tool available on net??
I do not need a subversion tool( cvs,svn etc) or a automation build tool ( luntbuild, cruisecontrol, anthill) , I am looking for some tool,that helps you manage the release after its made.For example,i would like to track down which release was made to which customer on which date,how many releases were made to any particular customer,what source code was shipped to the customer..and so on....
Is there any such tool that can accomplish this???
Thanks

Help with MacMail for a newbie please

I have just set up our G5 Mac's on our Windows Domain, I have enabled IMAP on Exchange Server 2003 and configured Mac Mail accordingly.
Mac Mail can now send and receive messages and attachment just fine but when a sent message fails you do not receive the automated delivery failure notification from the System Administrator.
If the Mac operator uses Outlook Web Access or a PC using IMAP to check his Inbox then the automated messages are displayed fine but Mac Mail refuses to pick them up. I am new to Mac's and would appreciate some advice, I have checked the Junk mail and they are not there either....
Cheers for reading.

Hi Mark, and a warm welcome to the forums!
I really have no idea on this, but I suspect possibly a port problem, do you know which port the failure notification uses?
Might turn off the Mac's Firewall for a test.
Ports used by Exchange Server...
http://www.petri.co.il/portsused_byexchange.htm

Forte For Java GUI Editor

Hi everyone,
I've been trying to switch usage between Forte for Java running on 2 platforms (Win NT and Solaris 8). For this reason, I want to try to use the GUI Editor in each. But when I tried copying the same .class file from one platform to another and running opening the file under Forte for Java, the GUI Editor doesn't show up the form and Component Editor. Is there a way to make Forte for Java able to recognize the GUI components in a class file not creatd in Forte or not in that version of Forte? Thank you for any help!
Bob

Hi,
this happens not just with class file but also with .java
file. I created a GUI with Forte ( on windows ) and because I did not jave runtime setup on windows, I copied, java file that was created to the unix env. Then added some code to it and copied back to the windows.
After that, GUI editor never came up. I lost all that I did
to create a GUI. Now I can modify GUI only manually.
I you have found answer to this, please let meknow
at [email protected]
rgds,
sam

Sunsofts Forte for Java & SQLJ - anyone?

Hi,
we would like to use Sunsofts Forte for Java as an IDE to work with SQLJ sources.
Since currently no other tool besides Oracles JDeveloper seems to contain direct support for SQLJ we run into the need to give up SQLJ and use plain JDBC instead because we favorize Forte so much over JDeveloper. (Note: please don't discuss the pros and cons of JDeveloper vs. Forte!)
Does anybody use SQLJ inside Forte an can supply us with some guidance/help etc.?
Do any of you know if Sun ore some other vendor will supply SQLJ modules for Suns Forte?
Any help will be greatly appreciated.
Regards,
Robert.

BINGO !
Thanks Roxie!
Roxi suggested looking for a log file possibly in .../bin
found log files in:
C|/forte_jdk/forte4j/bin
and,
C|/forte_jdk/forte4j/bin/hs_err_pid1704.log
contained
at sun.awt.font.NativeFontWrapper.registerFonts(Native Method)
which I recognized from having previously encountered
Unexpected exception from NativeFontWrapper.registerFonts(Native Method)
http://developer.java.sun.com/developer/bugParade/bugs/4482430.html
and previously fixed code to deal with that bug by adding
set JAVA_FONTS=C:\home\rholder\sandbox\msda\jre\lib\fonts
to the .bat file that launched the java program,
sooooooooo,
by going to ControlPannel|System|Advanced|EnvironMentVariables
and adding
JAVA_FONTS=C:\home\rholder\sandbox\msda\jre\lib\fonts
forte for java 4 ce now performs mount|Filesystem, etc
and, debugging of java code is now in progress!!!
thanks again Roxie,
[email protected]

Flex with webdynpro for java using Flex Island

Hi Friends,
I am on Netweaver/SAP Enterprise Portal 7.0 SPstack12, I am developing UI for BI reports using VC, I am interested in developing UI using flex and want to integrate those apps with EP, I came to know flux Island supports flux with webdynpro java, basically I am a webdynpro for java developer, I want to develop flux applications with webdynpro for java in NWDS. And i want to know how to use Flex Island with webdynpro for java. So could u please post some useful links.
Thank in advance
Regards
samba

Hi
If you want to try out using ADOBE Flash Islands with WDJ, you would need to download SAP CE 7.1 EhP1 trial version, if not done so already.
The following link may help you in building the WDJ component with Flash Islands..
The specified item was not found.
If you donot want to develop the Flex project you can download the .swf file provided by the SAP mentors:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10989ef6-968c-2b10-50a9-eb34a5267163
Thanks.
Chitrali

About Forte for java

I'm a really beginner on Java.
I don't the guru use what kind of java developing tools.
There's only one I can use is "Forte for java".
Dose anyone there who familiar to it and can help me?

I'm a really beginner on Java.
I don't the guru use what kind of java developing
tools.
There's only one I can use is "Forte for java".
Dose anyone there who familiar to it and can help me?I used Forte for Java when I was really really new to Java too. I liked it.
I liked the way different words in the Java program were shown in different colors. It helped me to understand the language. I thought it was a nice tool.
But unfortunately, I only learned Java with Forte. I associated all my work with Forte. I was thinking much about Forte. I didn't learn about directory structures in an application or how Java uses a classpath until I stopped using Forte.
So yawmark is right. If you use Mac OSX try using BBEdit as an editor. It will color your code. And outside of an IDE you will be aware of the basics of Java. If you use another Operating System, there are other text editors available that can color your code and that can be helpful.

PetStore running in Forte for Java 4 - Part 1

I am hoping to get the PetStore (1.3.1_01) running under Forte for Java 4 EE. If I succeed I will be posting this up to the web-site so that it is publicly available. However I am very new to Forte for Java (FFJ) [I ran it for the first time six days ago]. As a concequence I may not understand the best way of configuring projects or web modules etc, associating the J2EE, implementing ANT files etc etc etc. So what I thought I would do is (briefly) explain what I am doing so that if I am doing stupid things or there are better ways of doing things you guys can shout (ie get some peer review as I proceed).
The overall approach I am taking is:
+ The project is stored in the standard \forte4j-userdir\system\Projects directory.
+ the source currently is stored separately (ie the directory I unzipped the perstore to).
+ I am building the project in the same sequence that the main build.xml files specifies (ie components / waf / apps).
+ I expose parts of the PetStore project to FFJ by mounting local directories from the unzipped PetStore directory.
+ As long as the j2ee.home is defined in build.properties the ANT build processes work. However a compile under FFJ will not work as it does not know where the j2ee.jar file is. Therefore I have mounted the j2ee.jar and added this to the project. [IS THERE A BETTER WAY OF DOING THIS?]
Each of the COMPONENTS (asyncsender, encodingfilter, purchaseorder etc) are held in separate java packages. Each of these have been mounted separately and then arranged in the same order as they appear in components/build.xml. Each of these can then be compiled, or, built using the ANT files successfully. Finally for the COMPONENTS I wanted to make the components/build.xml known to FFJ. Unfortunately you can't just mount the components directory (see problem below). So I have created a new directory at the petstore/src level called build and mounted this directory. The components build.xml file has been copied into this directory and renamed to components.xml. Finally the base directory in components.xml has been changed from (.) to (../components). Double clicking on this now builds all of the COMPONENTS without errors.
I have taken this approach rather than just mounting the components directory as when you do a build you get the following error:
"java.lang.ClassNotFoundException: Mount/org-openide-filesystems-LocalFileSystem_1.settings: missing 'class' attribute in 'instance' element". [WHAT IS THIS AND IS THERE A SOLUTION?]
Hopefully I will get some more time tomorrow to start work on the waf part of PetStore.
Cheers
Paul

Before starting on the waf import to Forte for Java (FFJ) I did a quick review. And found an issue. FFJ was not recognising the EJB components as EJBs.
When creating a new EJB FFJ will store the following "special" files:
+ <ejb name>.ejbdd containing the <ejb-jar> definition
+ <ejb name>.ejbj2eeri containing the <j2ee-ri-specific-information> [AM I CORRECT IN SAYING THIS IS THE CONTAINER SPECIFC DEPLOYMENT INFORMATION? ]
+ <ejb name>.sesejb or .entejb or .mesejb - depending on whether the bean is an session / entity / message bean
The PetStore project contains <ejb-jar> definitions in ejb-jar.xml files. These files were therefore copied out to the appropriate location for FFJ and renamed to <ejb name>.ejbdd. On opening the project FFJ now recognises the EJBs correctly (signified by the FFJ bean icon). The build.xml files were then changed to copy the new <ejb name>.ejbdd files to the META-INF directory. The project both compiles and can be built from the ANT files successfully.
So far I have not done anything about the ejbj2eeri files [CAN ANYONE PROVIDE ME WITH ANY INFO ABOUT THESE? FOR EXAMPLE DOES FFJ HAVE ANY SPECIFIC VALUES STORED IN HERE OR WILL THE CURRENT VALUES DEFINED FOR THE J2EE REFERENCE IMPLEMENTATION BE OK].
Neither have I done anything about the .sesejb / .entejb / .mesejb files. They contain the following information:
<?xml version="1.0" encoding="UTF-8"?>
<fjee-ejb>
<file-version>1.0</file-version>
<ejb-version>2.0</ejb-version>
</fjee-ejb>
[AGAIN CAN ANYONE PROVIDE ANY INFORMATION ABOUT THESE? ARE THEY NECESSARY OR IMPORANT]
Thanks for any help that can be provided.
Paul

Open Forte for java project in Sun java studio enterprise

Hi Everyone, I am new to Java development. I have a java application developed in Forte for java 4 and I need to open and compile it in Sun java studio enterprise. Could anybody tell me how to do that? Thank you very much.

The recent versions of the IDE (starting with NetBeans 4.1 and JSE 8) are based on a more-robust project system that is ant based. Projects from Forte for Java 4, unfortunately, cannot be directly opened in JSE8, NB4.1 and later.
If you do have access to the original source code, pl. try the following in the latest version of JSE or NetBeans:
- Create a fresh project in jse using File | New Project. (For a java standalone app, you would choose General | Java Application from the dialog).
- Add the existing files to the empty project. You can do so by right-clicking on the project, selecting properties and adding the existing source directories under 'Source Packages' in 'Sources' category.
Or from the new project dialog, you could select 'General | Java Project with existing sources' option.

Forte for Java and webLogic

How do I integrate WebLogic 6.1 and Forte for Java?

Hi.
You might check with Sun/Forte for info on how to do this.
Regards,
Michael
Stjepan Maric wrote:
How do I integrate WebLogic 6.1 and Forte for Java?--
Michael Young
Developer Relations Engineer
BEA Support

Problems uninstalling Forte for java 4 community edition

I just installed Forte for java 4 community edition at work, and when i tried to uninstalled it with add/remove programs from control panel. And the uninstall wizard start but then a Sun window apper and it is written, uninstalling and the uninstall program seems to be frozen.

i have the same problem, reading the documentation it seems you got to run the installer again and you ll get prompted with the "file deletion confirmation"
too bad i have a self-installing package and i don't get the prompt...
guesses anyone?

Help with (forte for Java CE) please

Similar Messages

Maybe you are looking for