Help with Front Row...

I just received my refurbished imac replacement.It is running great,i added more memory up to 2gb. My question is i dont have Front Row on this replacement it is the same as the imac i sent back 20in. 2.16ghz 2gb ram 250gb hd how do i install this do i have to re-install everything?

acidpope
Here's everything you'll need to troubleshoot Front Row and your Remote.
1) Keyboard shortcuts for Front Row
http://docs.info.apple.com/article.html?path=Mac/10.4/en/cdb_frkybd.html
2) Troubleshooting the Apple Remote
http://docs.info.apple.com/article.html?artnum=302549
3) Pairing your Apple Remote with your computer
http://docs.info.apple.com/article.html?artnum=302545
4) How to replace the Apple Remote battery
http://docs.info.apple.com/article.html?artnum=302543
Dennis
17" iMac Intel Core Duo 1.5GB Ram   Mac OS X (10.4.8)   Maxtor 300GB FireWire 2G Nano

Similar Messages

  • Stuck with Front Row

    My mother was trying to email two simple jpg files from "Documents" folder. I don't know what she clicked. She ended up with Front Row stuck on her screen. Could not exit. Mouse did not work, neither was the keyboard. She also remembered hearing excessive HDD scratching.
    When she described the problem, I did not understand because I've never seen Front Row. I had to drive clear across the town to help her out.
    I had to yank off the power in the back. Then boot. Everything is a o.k. now.
    How could one end up with Front Row? Especially from an email environment?

    Alex DeSlim wrote:
    My mother...
    How could one end up with Front Row? Especially from an email environment?
    That is expected behavior from mothers
    btw - instead of "yanking out" the main, you could just hold down the power button on the Mac until it shuts off.
    -mj

  • New iMac install problem with Front Row

    Hi I just got my imac yesterday, the desktop intel core duo with mac os x tiger. It comes with front row but when I clicked on it to open, it said I needed to install, so I followed the instructions to the letter, and when it starts to install front row, it says: "there were errors installing the software. Please try installing again." Which I did repeatedly, plus restarting. No go. Can anyone give me a tip on what I should try next? Thanks. you can email me [email protected]

    Normally to activate Front Row you press the Menu button on the Apple Remote that came with your Mac or you can use the keyboard shortcut of Command(Apple) + Escape.

  • Having problems with front row (and the opticle drive)

    I bought my macbook three days ago, and I'm already having problems. First off, I transfered music from my user profile on my old iMac G5 to the macbook via data DVD. My music collection had some purchaces from the itunes store, so I had to go through the authorization thing, and I can now play them just fine in the iTunes library, but the problem is, if I try to use the front row program to play my purchaced music, I get the message saying that I have to authorize it first. What the ****? Does anybody else have this problem? Also, like many other macbook users, I'm having problems with the opticle drive, such as getting cds to be recognized and other things of that nature.

    I noticed that this problem started after I tried to use a software to unlock my drive's region...
    I believe this is the problem. The VLC Media Player will usually play DVDs from other regions without changing the settings on your optical drive. You may need to reset your optical drive's firmware back to the original setting, make sure you have the region set for the one you'd prefer to use the most and then use VLC to play the other DVDs.
    -Doug
    P.S. After two years in the Front Row forum, I'm not sure I've ever heard of anyone playing HDDVD_TS folders with Front Row. I'm not saying it won't work, but I'm not sure it's really supported either. I do have DVD Studio Pro myself, but I'll have friends or family staying with me for nearly the next month, so my evenings and weekends will be a bit full to try making one up for testing...

  • Using Smart folders with front row

    I have several video files on my Hard Disk, and would like to see them without having to move them to the MOVIE folder.
    Creating aliases doesn't work because I always have new files and can't synchronize all of them manually!
    Best way would be to create a Smart folder INSIDE movies that will be automatically populated with all the videos on my computer.
    Any ideas on how to do it?
    thanks,
    P.

    I don't think a "smart folder" is going to work. A "smart folder" is not really a folder itself, it's a text file that remembers the criteria you selected for a search. It's a little Mac OS X magic that makes the Finder think it's a folder. Front Row thinks it's a text file. You won't be able to browse the contents of a "smart folder" with Front Row. Now, why Apple couldn't add smart folder technology into the Front Row interface, I have no idea. I would think they could implement this. I would send them some feedback and request this option:
    http://www.apple.com/feedback/macosx.html
    -Doug

  • Tonnes of Music with Front Row

    hey everybody. I was wondering if anyone knew how to solve my small issue with front row. since i only have a 40GB iPod, I have to de-select much of my library, picking and choosing which albums make the cut while im on the go. Im almost up to 80 GB of music in my iTunes library -- The problem Im having is that when you de-select a song in iTunes, it does not show up in Front Row. Since my music collection is growing and growing, I'd like to find a way where I can still enjoy all of my music while using Front Row even if it's not destined to be uploaded to my iPod.
    Thanks!

    Perhaps you should change the way you sync your iPod? You could create a playlist that gets synchronized to the iPod. Then you wouldn't have to use the check box to select items to sync.
    -Doug

  • Interrupting Keynote 3 with Front Row

    When I interrupt a slide with Front Row to play a song, I get the desktop back afterwards rather than the slide I interrupted. I have to manually click on the Keynote icon to get back to my slide. Is this the intended behavior? It would be really nice if the interrupted slide would come back up.

    When I interrupt a slide with Front Row to play a
    song, I get the desktop back afterwards rather than
    the slide I interrupted. I have to manually click on
    the Keynote icon to get back to my slide. Is this the
    intended behavior? It would be really nice if the
    interrupted slide would come back up.
    This drove me mad until I discovered the trick. This assumes you're using the Apple Remote.
    1) click through KN until the point you want to switch out to Front Row. (This can be any point, say build 27 on a slide with 43 builds. It can even be in the middle of an embedded QT movie - yes, even a 1920x1080 HDV assuming you've got the codec from FCP or QMaster).
    2) this is the important bit. Click the ENTER button on the remote - in the centre of the click wheel - BEFORE you click the MENU button to call up Front Row. The freezes KN at exactly the moment you click.
    3) Do whatever you want in Front Row
    4) Return to KN using the MENU Button to get back up the Front Row hierarchy
    5) Then click the ENTER button again to restart KN at exactly the point you left it. You do not get the Desktop back and you do not need to manually click the present slides button in KN.
    This really blew 'em away at one of my recent gigs.
    MacBookPro 17. G5 Dual 2Ghz. iMac G5   Mac OS X (10.4.7)  

  • AirTunes compatibility with Front Row

    In the AirPort Express FAQ, it says:
    Question: Can I use other applications, like QuickTime or Windows Media Player, to send sound to AirPort Express via AirTunes?
    Answer: At this time Apple only supports sending one AirTunes stream to AirPort Express via iTunes 4.6 or later.
    What does this mean for Front Row? Is Front Row just a interface for iTunes and hence works with AirTunes, or not. I see in the Front Row forum people asking many questions about getting volume control with Front Row and AirTunes, so it seems like the FAQ description sounds more limited that the reality.
    I am particularly interested the ability to watch a movie (that has been loaded into iTunes) using the Front Row interface and piping the sound out to AirTunes. In this case, would Front Row be using iTunes (and work with AirTunes) or would Front Row be using QuickTime (and not work with AirTunes)?
    If movies in Front Row will work, will it work for all movies loaded into iTunes -- e.g. not just mov files, but also avi files supported with QuickTime plug-in to make them work in iTunes? And, if avi files loaded into iTunes would work, would it work for both movies physically stored in /iTunes/movie folder, as well as 'reference movies' stored in that folder pointing to files stored elsewhere?

    Per the Wikipedia AirPort article, no video in iTunes. Apparently, there are 3rd party utilities that can pump any program sound output (Mac and Windows) to the AX, not just iTunes -- which is handy, say, if you want to play Pandora in Safari. However, even these programs say they are useless for video. Apparently, the AirTunes protocol delays playback 2 to 10 seconds for buffering. Delay in audio playback aren't a problem, but with video, the sound and picture would be out of synch.

  • Aperture shared over a network for viewing with Front Row?

    Aperture shared over a network for viewing with Front Row? I can view iPhoto from my laptop or desk top but I cannot find a way to share Aperture over the network.

    If tested to work with other MacOs versions, this should be a main FAQ listed on Apple's Support website for Aperture and/Mac OSX.

  • Need help with Pivoting rows to columns

    Hi,
    I need help with pivoting rows to columns. I know there are other posts regarding this, but my requirement is more complex and harder. So, please give me a solution for this.
    There are two tables say Table 1 and Table 2.
    Table1
    name address email identifier
    x e g 1
    f s d 2
    h e n 3
    k l b 4
    Table2
    identifier TRno zno bzid
    1 T11 z11 b11
    1 T12 z12 b12
    1 T13 z13 b13
    2 T21 z21 b21
    2 T22 z22 b22
    As you can see the identifier is the column that we use to map the two tables. The output should be like below
    output
    name address email identifier TRno1 zno1 bzid1 TRno2 zno2 bzid2 TRno3 zno3 bzid3
    x e g 1 T11 z11 b11 T12 z12 b12 T13 z13 b13
    f s d 2 T21 z21 b21 t22 z22 b22
    Also we do not know exactly how many TRno's, zno's, etc each value in the identifier will have. There may be only 1 TRNO, zno and bzid, or there may be four.
    All the values must be in separate columns, and not be just comma delimitted. There are also other conditions that i have to add to restrict the data.
    So, can you please tell me what is should use to get the data in the required format? We are using Oracle 10g. Please let me know if u need any more information

    Something like this ?
    SCOTT@orcl> ed
    Wrote file afiedt.buf
      1  select a.name,
      2  a.address,
      3  a.email,
      4  b.* from (
      5  select distinct identifier
      6  ,max(trno1) trno1
      7  ,max(zno1) zno1
      8  ,max(bzid1) bzid1
      9  ,max(trno2) trno2
    10  ,max(zno2) zno2
    11  ,max(bzid2) bzid2
    12  ,max(trno3) trno3
    13  ,max(zno3) zno3
    14  ,max(bzid3) bzid3
    15  ,max(trno4) trno4
    16  ,max(zno4) zno4
    17  ,max(bzid4) bzid4
    18  from (select identifier
    19  ,decode(rn,1,trno,null) trno1
    20  ,decode(rn,1,zno,null) zno1
    21  ,decode(rn,1,bzid,null) bzid1
    22  ,decode(rn,2,trno,null) trno2
    23  ,decode(rn,2,zno,null) zno2
    24  ,decode(rn,2,bzid,null) bzid2
    25  ,decode(rn,3,trno,null) trno3
    26  ,decode(rn,3,zno,null) zno3
    27  ,decode(rn,3,bzid,null) bzid3
    28  ,decode(rn,4,trno,null) trno4
    29  ,decode(rn,4,zno,null) zno4
    30  ,decode(rn,4,bzid,null) bzid4
    31  from (select identifier,
    32  trno,bzid,zno,
    33  dense_rank() over(partition by identifier order by trno,rownum) rn
    34  from table2)
    35  order by identifier)
    36  group by identifier) b,table1 a
    37* where a.identifier=b.identifier
    SCOTT@orcl> /
    NAME       ADDRESS    EMAIL      IDENTIFIER TRNO1      ZNO1       BZID1      TRNO2      ZNO2       BZID2      TRNO3      ZNO3       BZID3      TRNO4      ZNO4       BZID4
    x          e          g          1          T11        z11        b11        T12        z12        b12        T13        z13        b13
    f          s          d          2          T21        z21        b21        T22        z22        b22
    SCOTT@orcl> select * from table1;
    NAME       ADDRESS    EMAIL      IDENTIFIER
    x          e          g          1
    f          s          d          2
    h          e          n          3
    k          l          b          4
    SCOTT@orcl> select * from table2;
    IDENTIFIER TRNO       ZNO        BZID
    1          T11        z11        b11
    1          T12        z12        b12
    1          T13        z13        b13
    2          T21        z21        b21
    2          T22        z22        b22
    SCOTT@orcl>Regards
    Girish Sharma

  • 10.5.1 No AirTunes with Front Row

    Why is there no AirTunes with Front Row in Leopard? I used it daily with Tiger.

    It is absolutely necessary that this is fixed asap. The Airport Express should be free to interact with other applications in the first place. I am already considering spending $25 on AirFoil, so that I can use my Airport Express to its fullest potential. But I can't believe that Apple would screw up Front Row and Airport Express like this. Shame on them for not having addressed this yet.

  • Anybody using M-Audio Transit USB with Front Row?

    If any of you are using Front Row with the external Transit USB D/A Coverter, and are experiencing freezing issues, you may want to read below what I have been able to figure out as to why this is happening.
    After MANY hours of frustration, I have been able to confirm that the Transit USB is causing the following problem:
    I have a Mac Mini with a clean install of Leopard 10.5.2 and all Apple updates. Nothing else is installed. With the Transit NOT connected to the Mini, I installed the latest 1.7-3 drivers from your site and restarted computer. I then connected the Transit and selected AC-3 as the Audio Output. In order to make Front Row see AC-3, you must open "DVD Player" and select its output to "Digital Out - M-Audio Transit USB" instead of "System Sound Output". You then need to restart Mini. With that done, playing movies thru "DVD Player" works fine. However, when you go to watch a movie thru "Front Row", the Transit (for some reason) causes "Front Row" to freeze. It doesn't freeze during movie playback, it freezes when hitting "Menu" and you are sitting at the Menu Screen that asks for the following 3 options: "Resume Playing", "Start from Beginning", or "DVD Menu". There is no way to get out of this frozen state. You MUST restart computer. When computer restarts, if you go into "DVD Player" Preferences and change the audio output selection back to "System Sound Output" and restart computer, this issue disappears and Front Row works fine again (however, without AC-3).
    To reiterate my point: Transit USB works fine with DVD Player but NOT with Front Row. I have confirmed this on 2 Mac Mini's.

    This is indeed an M-Audio issue. I have the same setup you do, except my mini is a 1.25GHz G4 with no on-board Digital audio output.
    To make it work with front row, you have to go to (Settings) and turn off the background music, it will stop freezing and let you select your media.
    My AC3 output from my Transit USB has never worked in this configuration. My receiver just doesn't see AC3 coming out of it.....soooo no sound at all. However I set it to (Outputs 1&2), (24bit) and boom...my receiver plays back in its Pro Logic setting via an optical connection from the Transit. All my movies and music playback just lovely. BUT. If I go on the net and try to play a flash video, like a YouTube, etc... Safari will freeze. I verified it is the Transit and not Safari because the moment I unplug the Transit, Safari wakes up, the video resumes and sound plays through the internal speaker just fine.
    Something's goofy with the M-Audio Driver for Leopard.

  • Headless mini disagrees with Front Row

    FYI. I'm running a Mini Intel headless via Timbuktu. With no monitor attached the remote does fine controlling iTunes, but when one tries to invoke Front Row, either via the keyboard or the remote, it results in a blank white screen. This was news to Apple, so I thought I'd post the info.
    Mini Intel Core duo   Mac OS X (10.4.6)  

    Interesting, I've never tried Timbuktu with Front Row but Apple Remote Desktop works fine.

  • Why didn't the Mac Pro come with Front Row?

    I have absolutely loved my quad-core mac pro. It's been one of the best-performing computers I've ever owned, but this issue has somewhat annoyed me for quite some time: Why didn't this computer come with Front Row?
    I wouldn't imagine an IR port would be difficult at all to install into the case, so why wasn't it? I suppose I could rationalize its omission as this being a computer aimed at professionals--but then again MacBook Pro has Front Row as well... so what gives?
    Is there any aftermarket ways of having Front Row work with your Mac Pro?

    Indeed, I'm going to try the Wii remote approach as soon as mine arrives.
    It will also usable as a MIDI controller in Logic
    Anyone know if it's easy to redirect the DVD player output to a second DVI card? I have two monitors on the X1900 and I have a 7300 spare which I could use to drive my projector.

  • Problem with front row, please help!

    I got a year old MBP 15" which I updated to leopard, and it works generally fine, except for the fact that when using front row and leaving it playing music for about 5 minutes idle, it freezes, goes to blank screen, but still plays the playlist it was set on, but when I use the remote control, or press keys, it keeps frozen, the only way to quit is to force power off.
    Please help me, as I really like Front Row and my MBP is my hub for playing music in reunions.
    Thanks in advance

    I have (hopefully) found a solution to my part of this problem. I was getting the ClassCastExceptions on any page with a <jbo:row> tag after doing a failed DML action. I have tested this with the delete event. (btw, I am using jdev9.0.3.3 w/ BC4J/JSP) Before what I was doing was this:
    <% try { %>
    <jbo:Row id="delrow" datasource="ds" rowkeyparam="jboRowKey" action="Delete" />
    <% } catch (JboException jboEx) { %>
    do something
    <% } catch (Exception ex) { %>
    uh-oh, this is bad
    <% } %>
    If I removed the try/catch block everything worked fine. Unfortunatlely, I need to try/catch block here. To work around the problem I changed the code to this:
    <% Row rowDelete = ds.getRowFromKey(params.getParameter("jboRowKey")); %>
    <% try { %>
    <%
    rowDelete.remove();
    %>
    <% } catch (JboException jboEx) { %>
    do something
    <% } catch (Exception ex) { %>
    uh-oh, this is bad
    <% } %>
    The second bit of code does the same thing (but it doesn't use a bean like I think <jbo:Row> does) and it doesn't cause the ClassCastError on subsequent errors.
    I really hope this helps someone else because it took me forever to get a workaround!
    ~Rob Lundeen

Maybe you are looking for