Help with installing a CHAT CLIENT/SERVER

i cant seem to get my chatclient or chatserver to successfully connect to my server. even if i do a local host 127.0.0.1 thing it STILL says that it cannot connect.
the server is a stand alone.
is there a general place to install the compiled files?
im SO frustrated right now.
im writing a card game. it is done but now i need to implement the networking. so im starting with a simple chat server and i cant even get THAT to work.
HELP.....

I'm actually working on a card game (client/server if I can) as well, when I spotted this message. Card games work for me because they're simple, they're relatively fun and easy to figure out, and they aren't real-time or heavy on animation/sprites/hardware acceleration.
http://vpoker.sourceforge.net/ is a java based card game that has some excellent examples of how to conceptualize a 'card' object and a 'deck' of cards.
good luck, can try emailing me if you want to toss around ideas about our respective card games.

Similar Messages

  • Installing Elements 11 on Mac. Need help with install error "Setup wants to make changes."

    Installing Elements 11 on Mac 10.8.2. Need help with install error:  Setup wants to make changes. Type your password to allow this."  After entering Adobe password, nothing happens.  Locked from further installation.  Any ideas?  Adobe phone support could not help.

    Just before letting changes (installation in this case) be made on the system, Mac OS prompts for password & this has to be the Mac system password. This password prompt is the system's own native prompt & would accept the system password only. Please make sure it is the right system password (all/admin rights) and the installaion should run.

  • Help with installing 10.6.3

    Hello, I'm looking for a bit of help with installing Mac OS X 10.6.3 without screwing up.
    I currently have a Macbook with 10.6.3 on it, and I want to COMPLETELY reset my Mac. I want to have a pretty much brand new Mac with 10.6.3, which I have the disk for. I actually just updated from 10.5.8, hoping that it would erase my hard drive and re-install, but it didn't. So I would like help with how to completely reset my Mac, and re-install 10.6.3.
    Thanks in advance!
    ~Dan

    Use that disk, but after booting from it and before running the install, choose Disk Utility from the Utilities menu and erase the drive.
    (75462)

  • Hello  I need your help with installing the flash drive into my laptop

    Hi
    I am Rachel Friedman asking for your help with installing the flashdrive player into my laptop.
    Thanks
    Rachel

    To give you any useful advice, I'm going to need to know more about your computer and browser:
    https://forums.adobe.com/message/5249945#5249945

  • MOVED: help with installing 2 os on one hd

    This topic has been moved to Operating Systems.
    help with installing 2 os on one hd

    RedMoose:
    Congratulations on installing an upgraded HDD into your PowerBook.
    I am not sure exactly what happened in the formatting process, but here are some directions that should help:
    Formatting, Partitioning Zeroing a Hard Disk Drive
    Warning! This procedure will destroy all data on your Hard Disk Drive. Be sure you have an up-to-date, tested backup of at least your Users folder and any third party applications you do not want to re-install before attempting this procedure.
    Boot from the install CD holding down the "C" key.
    Select language
    Go to the Utilities menu (Tiger) Installer menu (Panther & earlier) and launch Disk Utility.
    Select your HDD (manufacturer ID) in left side bar.
    Select Partition tab in main panel. (You are about to create a single partition volume.)
    Select number of partition in pull-down menu above Volume diagram.
    (Note: 1 partition is normally better for an internal HDD. External HDDs usually have more than one. See Dr. Smoke’s FAQ Backup and Recovery for tips on partitioning external HDD.)
    Type in name in Name field (usually Macintosh HD)
    Select Volume Format as Mac OS Extended (Journaled)
    Click Partition button at bottom of panel.
    Select Erase tab
    Optional: (Select the sub-volume under Manufacturer ID (usually Macintosh HD).
    Check to be sure your Volume Name and Volume Format are correct.
    Select on Security Options button (Tiger) Options button (Panther & earlier).
    Select Zero all data. (This process will map out bad blocks on your HDD. However, it could take several hours. If you want a quicker method, don't go to Security Options and just click the Erase button.)
    Click OK.
    Click Erase button
    Quit Disk Utility.
    Open installer and begin installation process.
    Please post back with further questions, comments or an update.
    Good luck.
    corneius

  • Problem with Installing and Configuring MS Server 2012 Essentials trial and MS Server 2012 Standard trial

    My name is John Grace.  I have been an MS customer for years.  Never before in my experiences with MS up to this point have I experienced such POOR product support.  Your pre-sales agents have no knowledge to offer with pre-sales config or
    install issues, your support personnel are trained not to provide any reasonable help with even minor questions and concerns helping to make sure your trial experiences are progress and successful, your product support Mgrs show lack luster concern if you
    need some technical direction.  The first thing that is asked is do you have a support contract or credit card for this session.  Now, if I am evaluating products a support contract should not be necessary as you should want customers to have good
    outcomes with their trials.
    I have been trying to configure test servers with the above mentioned products for the past 6 days with no success.  Each install is different and the configurations some times work and some times they don't.  I reach out for help in your forums,
    etc., and am still at square one.
    This frustrating and breeds a lack of confidence in your organization.  When Bill Gates was in charge I experienced none of the nonsense today. 
    I have identified bugs and issues to your product teams and they gladly accept these.  But when help is needed...it is send us an email type attitude.  I have 8 8 core servers running  windows 2008 server R2 slated for upgrading to windows
    2012 server, and more after that.  If I don't get the trial software to work, the upgrades are terminated.
    Please give me some help or you will loose me as a customer, and customers that I installed systems for.
    John Grace
    (937) 286-4912
    John Grace

    Hi again Alan,
    Thanks for the reply, i have however not been able to find any viable hotfix from MS addressing this problem so far. I only found the QFE for 2008 R2, but this is not applicable in my enviroment.
    Sadly, we are experiencing the same issue with the 2008 R2 server as print server now. So the problem seems to be with the 2012 R2 RDS servers.
    We have been able to narrow it down to a probable cause though:
    The issue seems to be the cause of Client Side Rendering, even if it is disabled on the shared printers. We are seeing heavy bloating in the registry:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Print\Providers\Client Side Rendering Print Provider
    The same printers are listed multiple times in subkeys for each user-SID.
    The print server is listed twice under the 'Servers' key, once with just the hostname and once with the fqdn. Benath these two many of the printers are also listed multiple times.
    Consequences are that printers are showing as clones for the users and they cannot set them as default printer. If they remove the printer manually, it just reappears. Setting a delete on the shared printer through GPP does not work either.
    The only manual workaround we have found working is to delete the entire "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Print\Providers\Client Side Rendering Print Provider" key on the
    terminal server in question, and then restart the print spooler. This fixes the problem for the user, but once they start logging off and on again, the bloating of the registry is at it once more - and the problems following with it.
    In an enviroment with 70+ printers and 15 RDS servers, spread on 3 different farms, it's not a good solution though.
    Any ideas?

  • Running reports created with Reports 9i in client-server configuration

    I need to have users run reports created with Oracle Reports 9i on workstations without any Oracle products installed on it, (in a client-server configuration as opposed to Web based) . I am looking for a step-by-step approach to accomplish this. I looked through the installation documents in OTN and I did not see one that addressed this.
    BTW, I saw an earlier post in this form which disscussed this,indirectly, for Reports 6i but I don't think these steps will work for 9i rpeorts
    ** Earlier post
    Question:
    I have an application in Oracle 8i, Forms 6i, Reports 6i. Now I want to make executable CD which will be installable in nature. I don't know how to make it or what tools to be used for this . Kindly help me out.
    Answer:
    You can write a .bat file for installation.....
    This file should do following things.
    1. Oracle8 Personal Setup
    Install only Database (no tools)
    2. Oracle Developer200 Setup
    Install only Forms Runtime
    Reports Runtime
    Graphics Runtime
    3. Use imp/exp to put the desired database...
    4. Copy exexutables in some directory and place shortcuts in programs and destkop
    5. Make new file-types in start->setting ->folder options-> file-types
    and specify that in which runtime-application you want to open your executables....
    Thanks in advance,
    Audrey Watson

    hi audrey,
    there is no client/server runtime available for reports9i. what
    you can do is to use the rwclient executable shipped with IDS
    to submit jobs to the reports server.
    there are plans to provide a stand alone thin client in the
    future but this is not available yet.
    regards,
    christian

  • Need help with a java chat software!!! Anyone pls give ideas

    I need to implement a chat protocol with sockets for my course!!
    As of now i have only got to the simple client server application with sockets and have a user interface with panels.
    How could I proceed...
    How should i use login names and passwords??
    Should i use if else loops to specify :
    various headers like
    login
    pass
    send
    exit
    if you could point out som esite that will be helpful or even a book it would be of great help!!

    Don't use if/else loops, they have this nasty habit of not existing.
    My quarter-pence:
    For passwords, use a map which maps name/hashed password. That way, you'll never actually store the password.

  • Help with Moving Emails from Exchange Server 2013

    Hi Team,
    Help, I need a solution on how to copy incoming and outgoing emails together with their attachments and was hoping someone could help with a solution I need to find for this problem.
    1) I have a need to copy all incoming and outgoing emails & attachments from Exchange Server 2013 mailboxes on a daily basis, so they can be archived into an external 3rd party database overnight.
    I believe that the first step is that I can set up another Exchange mailbox, through Journaling to receive these emails. 
    Is there any way that these emails can then be moved direct from the Journaling mailbox that I have created, to a shared folder on the network? If so what format would they be sent out as e.g. .msg, .ems and what is the process?
    Failing that, could they be sent to an Outlook client (not another Exchange mailbox) on the network and stored in a .pst file? (I have a program that will export them from .pst)
    I would really appreciate any assistance that you can provide in this matter.
    Regards, Greg.

    Hi,
    You can set auto-forward on journaling mailbox and auto-forward emails to another mailbox. Why don’t directly archive the emails from the journaling mailbox “an external
    3rd party database”.
    Thanks,
    Simon Wu
    TechNet Community Support

  • Help with installing CS2 in Snow Leopard

    Can anyone help me with installing CS2 on a MacBook running OSX Snow Leopard? I have trouble with activating the product and get a splach screen with a monkey element or  logo rather than the adobe logos... confusion reigns!

    Hi Rory, be aware that running CS2 products on Snow Leopard isn't going to be a supported combination. Here's a related thread: http://forums.adobe.com/thread/499253. Apparently some customers have been able to run CS2 software on Snow Leopard. You can also check with our chat support at http://adobe.ly/v6wfLL. However, I can't be certain that they'll be able to assist you. You might want to consider upgrading.

  • Can Test Custom Jars with 6i Run Form - Client/Server?

    I want to test custom Jar files with Forms 6i from my desktop, but I cannot get the Run Form->Web to work. Is it possible for the run time to load the just jars for PJC when you do Run Form -> Client/Server? So far, when I have done this, it does not execute any PJC. Any ideas, tips?
    Thanks,
    Kurz

    Hi Kurz
    Any ideas, tips?pls have a look
    http://www.dulcian.com/papers/ODTUG/2004/ODTUG%202004_Balcu1_JavaBean.htm
    http://www.oracle.com/technology/sample_code/products/forms/extracted/getclientinfo/readme.html
    http://www.scribd.com/doc/1027764/Forms-6i-Deploying-Forms-Applications-to-the-Web-with-Oracle-Forms-Server
    Hope it helps u
    Regards,
    Abdetu...

  • Issue with installing second Service Manager server

    We decided to install a second SM server to use as a test following the KB from MS below:
    http://technet.microsoft.com/en-us/library/dn520899.aspx
    We later found out that this install process had some issues and we needed a hotfix from MS to resolve it. The hotfix is basically a whole new installer MSI. MS had me uninstall SM and then reinstall using the MSI they gave me.
    I am not getting the following error trying to do the install
    Install Services
    An error occurred while executing a custom action:_CreateMOMRegKey.
    The upgrade attempt has failed before permanent modifications were made.
    Upgrade has successfully rolled back to the original state of the syste. Once
    the corrections are made, you can retry upgrade for this role.
    The install rolls back and thats it. MS has been somewhat helpful but we still haven't gotten it resolved. Anyone else try installing this hotfix version of SM and run into the same issue?
    The KB that refers to the replacement MSI is
    KB2862620.

    among other things, _CreateMOMRegKey creates registry keys related to ops manager and service manager. This is a common error with a management server reinstall, since these keys are not removed by an uninstall, and the creation method apparently does
    not handle the case where they already exists. Consider
    this thread.
    The long and short of it is that you will probably need to remove the registry keys [HKLM\Software\Microsoft\Microsoft Operations Manager] and [HKLM\Software\Microsoft\System Center] as well as restore your management server's encryption key from the backup
    you made after installing the first time.

  • Help with Installing flash error- metafile cannot be loaded

    I read the forum on this but it ended last year and there was no response to some recent questions on this and the direct email to the Adobe rep. on there got no response.
    I am having this problem with installing Flash- it gets about 30% of the way and then a message comes up that says the metafile cannot be loaded.
    I am running 10.7.5 on Mac, all browser software is current. I use both Safari and Chrome. After it said Flash was out of date I tried to update but got the metafile error. So I uninstalled Flash to install it fresh but the same error came up. I tried everything recommended from the forum. I also did all the steps from the help list direct from Adobe ( deleting Flash files, folders, rebooting, etc.) The offline link Adobe provides says the "file cannot be found" so I can't download that either. So I tried the online link download, but even after doing all the steps in order etc. I still get the error when I try to install it.
    I have no firewall and have no virus software running. I also tried the direct offline links that others have provided from 2013, (unfortunately they are old)  in both clicking on them and also downloading by right click but they are dead links and even  the download for it has no content.
    Any help that is more recent than last year? If this is in the wrong place, apologies. New to the forum.

    I tried all solutions but one posted in adobe support. I am local administrator but IE security settings are set by group policies and buttons in tools security setting are grayed out.
    After three days with "The ActiveX control for Flash Player could not be registered" message I tried registering the activeX control manually.
    Bingo! that made the trick.
    So open a DOS window, type "regsvr32.exe C:\WINDOWS\system32\Macromed\Flash\Flash10d.ocx" -first check if this directory exists and contains the Flash10d.ocx (no quotes needed) and you should receive a confirmation that it registered correctly.
    I must say that I've tried so many ways that I cannot repeat the correct order before this has worked ;-(
    Hope it works for you all

  • Help with installing pre-requisite packages on Red Hat Linux

    Having issue with installing packages with yum
    OS is RHEL 6 and following package which are prerequisites for Oracle Fusion Middleware install on Red Hat Linux 6
    uname details as follows
    2.6.32-220.el6.x86_64 #1 SMP Wed Nov 9 08:03:13 EST 2011 x86_64 x86_64 x86_64 GNU/Linux
    Example error: yum install gives error as follows for all packages.
    No package compat-libcap1-1.10-1 available
    Need to install following packages (as mentioned in the prerequisites)
    binutils-2.20.51.0.2-5.28.el6
    compat-libcap1-1.10-1
    compat-libstdc++-33-3.2.3-69.el6 for x86_64
    compat-libstdc++-33-3.2.3-69.el6 for i686
    gcc-4.4.4-13.el6
    gcc-c++-4.4.4-13.el6
    glibc-2.12-1.7.el6 for x86_64
    glibc-2.12-1.7.el6 for i686
    glibc-devel-2.12-1.7.el6 for i686
    libaio-0.3.107-10.el6
    libaio-devel-0.3.107-10.el6
    libgcc-4.4.4-13.el6
    libstdc++-4.4.4-13.el6 for x86_64
    libstdc++-4.4.4-13.el6 for i686
    libstdc++-devel-4.4.4-13.el6
    libXext for i686
    libXtst for i686
    FYI: If this forum is not appropriate please let me know appropriate forum and shall repost there.

    Hey,
    Normally I use YUM : http://taliphakanozturken.wordpress.com/2012/03/17/how-to-use-yum-to-install-rpm-packages-with-dependencies/
    Let me know if this is what are you looking for.
    I hope it helps you,
    Thiago Leoncio.

  • Need help with installing old version of firmware

    I would like to revert to an old version of firmware for my Airport Extreme base station. I have read in a number of postings that this would possibly help with the problem of my Canon Pixma ip3000 not working after the firmware was usdated. When I tried to install the old firmware, the Installer would not allow it, there was just a message that the software was up to date. Could anyone please give a step by step description of how this can be done? Is there a way around the Installer? Thanks.

    The firmware supplied with the base station was 4.1. After installing it, everything worked just fine, including wireless printing to a Canon Pixma ip3000. At one point, after being prompted by a message onscreen to upgrade to 4.2, I did the download and installation, and that is when all the problems started. No wireless printing, and I can't seem to use the Airport Admin or Assistant (not responding). Since then I have also upgraded the OS to 10.4.5.
    I am trying to downgrade to 4.1 since that is what worked initially and what was suggested in another posting I read.
    I did look at the information for the various parts of Airport and noticed that the Setup Asistant is 4.2, the Admin Utility is 4.2 and the base station is 5.5.1. Could this be affecting the problem as well?
    I will try downgrading using the link you provided. Thanks very much.

Maybe you are looking for