Help With IReport/JasperReport
HI!
I have created a File Through IReport and passing some parameter in it.So any one please help me with that.
I am running it with main class. IT is giving some error.The errors are as follows...
log4j:WARN No appenders could be found for logger (org.apache.commons.digester.Digester.sax).
log4j:WARN Please initialize the log4j system properly.
org.xml.sax.SAXParseException: Element type "property" must be declared.
at org.apache.xerces.util.ErrorHandlerWrapper.createSAXParseException(Unknown Source)
at org.apache.xerces.util.ErrorHandlerWrapper.error(Unknown Source)
at org.apache.xerces.impl.XMLErrorReporter.reportError(Unknown Source)
at org.apache.xerces.impl.XMLErrorReporter.reportError(Unknown Source)
at org.apache.xerces.impl.dtd.XMLDTDValidator.handleStartElement(Unknown Source)
at org.apache.xerces.impl.dtd.XMLDTDValidator.emptyElement(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanStartElement(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
at org.apache.xerces.jaxp.SAXParserImpl$JAXPSAXParser.parse(Unknown Source)
at org.apache.commons.digester.Digester.parse(Digester.java:1514)
at dori.jasper.engine.xml.JRXmlLoader.loadXML(JRXmlLoader.java:373)
at dori.jasper.engine.xml.JRXmlLoader.load(JRXmlLoader.java:357)
at dori.jasper.engine.xml.JRXmlLoader.load(JRXmlLoader.java:337)
at dori.jasper.engine.xml.JRXmlLoader.load(JRXmlLoader.java:323)
at dori.jasper.engine.JasperManager.loadXmlDesign(JasperManager.java:1017)
at TestJasper.main(TestJasper.java:27)
NESTED BY :
org.xml.sax.SAXParseException: Element type "property" must be declared.
at org.apache.xerces.util.ErrorHandlerWrapper.createSAXParseException(Unknown Source)
at org.apache.xerces.util.ErrorHandlerWrapper.error(Unknown Source)
at org.apache.xerces.impl.XMLErrorReporter.reportError(Unknown Source)
at org.apache.xerces.impl.XMLErrorReporter.reportError(Unknown Source)
at org.apache.xerces.impl.dtd.XMLDTDValidator.handleStartElement(Unknown Source)
at org.apache.xerces.impl.dtd.XMLDTDValidator.emptyElement(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanStartElement(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
at org.apache.xerces.jaxp.SAXParserImpl$JAXPSAXParser.parse(Unknown Source)
at org.apache.commons.digester.Digester.parse(Digester.java:1514)
at dori.jasper.engine.xml.JRXmlLoader.loadXML(JRXmlLoader.java:373)
at dori.jasper.engine.xml.JRXmlLoader.load(JRXmlLoader.java:357)
at dori.jasper.engine.xml.JRXmlLoader.load(JRXmlLoader.java:337)
at dori.jasper.engine.xml.JRXmlLoader.load(JRXmlLoader.java:323)
at dori.jasper.engine.JasperManager.loadXmlDesign(JasperManager.java:1017)
at TestJasper.main(TestJasper.java:27)
NESTED BY :
dori.jasper.engine.JRException: Element type "property" must be declared.
at dori.jasper.engine.xml.JRXmlLoader.loadXML(JRXmlLoader.java:397)
at dori.jasper.engine.xml.JRXmlLoader.load(JRXmlLoader.java:357)
at dori.jasper.engine.xml.JRXmlLoader.load(JRXmlLoader.java:337)
at dori.jasper.engine.xml.JRXmlLoader.load(JRXmlLoader.java:323)
at dori.jasper.engine.JasperManager.loadXmlDesign(JasperManager.java:1017)
at TestJasper.main(TestJasper.java:27)
Caused by: org.xml.sax.SAXParseException: Element type "property" must be declared.
at org.apache.xerces.util.ErrorHandlerWrapper.createSAXParseException(Unknown Source)
at org.apache.xerces.util.ErrorHandlerWrapper.error(Unknown Source)
at org.apache.xerces.impl.XMLErrorReporter.reportError(Unknown Source)
at org.apache.xerces.impl.XMLErrorReporter.reportError(Unknown Source)
at org.apache.xerces.impl.dtd.XMLDTDValidator.handleStartElement(Unknown Source)
at org.apache.xerces.impl.dtd.XMLDTDValidator.emptyElement(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanStartElement(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
at org.apache.xerces.jaxp.SAXParserImpl$JAXPSAXParser.parse(Unknown Source)
at org.apache.commons.digester.Digester.parse(Digester.java:1514)
at dori.jasper.engine.xml.JRXmlLoader.loadXML(JRXmlLoader.java:373)Any any one help me in pointing out the error.
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.SQLException;
import java.util.HashMap;
import java.util.Map;
import org.xml.sax.SAXException;
import org.xml.sax.SAXParseException;
import dori.jasper.engine.JRException;
import dori.jasper.engine.JasperManager;
import dori.jasper.engine.JasperPrint;
import dori.jasper.engine.JasperReport;
import dori.jasper.engine.design.JasperDesign;
import dori.jasper.view.JasperViewer;
public class TestJasper
* @param args
public static void main(String[] args) throws SAXParseException
try
JasperDesign jasp = JasperManager.loadXmlDesign("TestReport.jrxml");
JasperReport jad = JasperManager.compileReport(jasp);
Map parameters = new HashMap();
parameters.put("Title","Test Report");
String url = "jdbc:microsoft:sqlserver://10.10.10.50;portNumber=1433;DatabaseName=Empoyees";
Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver");
Connection con = DriverManager.getConnection(url, "sa", "windows");
JasperPrint jp = JasperManager.fillReport(jad, parameters, con);
JasperManager.printReportToPdf(jp);
JasperViewer.viewReport(jp);
catch (JRException e)
// TODO Auto-generated catch block
e.printStackTrace();
catch (ClassNotFoundException e)
// TODO Auto-generated catch block
e.printStackTrace();
catch (SQLException e)
// TODO Auto-generated catch block
e.printStackTrace();
}
Similar Messages
-
How to Customise new ISO27002 reports with iReport
Hi.
Any Idea how I can customise new ISO27002 reports on iReports. ISO27002
reports are included in Sentinel 7.1 and ISO27002 Solution pack. I'm
especially interested in "Additional criteria" feature, which is not
found on old reports.
Sentinel SDK doesn't include ISO27002 reports. I tried to open ISO27002
reports with iReports. It opens just fine, but when I try to compile
report, I get bunch of error messages.
-vesa
vesakeinanen
vesakeinanen's Profile: https://forums.netiq.com/member.php?userid=1491
View this thread: https://forums.netiq.com/showthread.php?t=48711Thank's, that helped a lot.
I found three jar files (master.jar, reportutils,jar and
taxonomyutils.jar). I added master.jar to iReport classpath ("Add
File"), moved master.jar to the top of class path, and now I can compile
report. (I'll add other jar files later, if it seems that those are
needed too).
I haven't yet tested if I can actually create a report that works.
Tomorrow I'll pick one ISO27002 report, tweak it some, and try to import
it back to Sentinel.
One extra question. Is there any way to import new ISO27002 report to
SDK, so I can see those in Eclipse's Sentinel SDK/Reports folder? Or
should I just open those reports I wish to customize directly with
iReport?
vesakeinanen
vesakeinanen's Profile: https://forums.netiq.com/member.php?userid=1491
View this thread: https://forums.netiq.com/showthread.php?t=48711 -
Problem reporting design with ireport
i have database with table msFish, this table have 3 column.
id+name+size
i want make a report with 4 report in one page that show each fish data
example report
id : 1 id : 2
name : marine name : piranha
size : 10 feet size : 0.3 feet
id : 3 id : 4
name : shark name : gold fish
size : 30 feet size : 0.2 feet
but all of this show in one page and design with ireport?do i need to have jasper reports installed to use ireports.
i have dowload ireport.tar file extracted it and im using it.
I didnt set any path..
i havent done anything except using ireprts directly by connec ting it to database .
Plzzz help me out.
i know this is a seemingly simple question.... -
Help with if statement in cursor and for loop to get output
I have the following cursor and and want to use if else statement to get the output. The cursor is working fine. What i need help with is how to use and if else statement to only get the folderrsn that have not been updated in the last 30 days. If you look at the talbe below my select statement is showing folderrs 291631 was updated only 4 days ago and folderrsn 322160 was also updated 4 days ago.
I do not want these two to appear in my result set. So i need to use if else so that my result only shows all folderrsn that havenot been updated in the last 30 days.
Here is my cursor:
/*Cursor for Email procedure. It is working Shows userid and the string
You need to update these folders*/
DECLARE
a_user varchar2(200) := null;
v_assigneduser varchar2(20);
v_folderrsn varchar2(200);
v_emailaddress varchar2(60);
v_subject varchar2(200);
Cursor c IS
SELECT assigneduser, vu.emailaddress, f.folderrsn, trunc(f.indate) AS "IN DATE",
MAX (trunc(fpa.attemptdate)) AS "LAST UPDATE",
trunc(sysdate) - MAX (trunc(fpa.attemptdate)) AS "DAYS PAST"
--MAX (TRUNC (fpa.attemptdate)) - TRUNC (f.indate) AS "NUMBER OF DAYS"
FROM folder f, folderprocess fp, validuser vu, folderprocessattempt fpa
WHERE f.foldertype = 'HJ'
AND f.statuscode NOT IN (20, 40)
AND f.folderrsn = fp.folderrsn
AND fp.processrsn = fpa.processrsn
AND vu.userid = fp.assigneduser
AND vu.statuscode = 1
GROUP BY assigneduser, vu.emailaddress, f.folderrsn, f.indate
ORDER BY fp.assigneduser;
BEGIN
FOR c1 IN c LOOP
IF (c1.assigneduser = v_assigneduser) THEN
dbms_output.put_line(' ' || c1.folderrsn);
else
dbms_output.put(c1.assigneduser ||': ' || 'Overdue Folders:You need to update these folders: Folderrsn: '||c1.folderrsn);
END IF;
a_user := c1.assigneduser;
v_assigneduser := c1.assigneduser;
v_folderrsn := c1.folderrsn;
v_emailaddress := c1.emailaddress;
v_subject := 'Subject: Project for';
END LOOP;
END;
The reason I have included the folowing table is that I want you to see the output from the select statement. that way you can help me do the if statement in the above cursor so that the result will look like this:
emailaddress
Subject: 'Project for ' || V_email || 'not updated in the last 30 days'
v_folderrsn
v_folderrsn
etc
[email protected]......
Subject: 'Project for: ' Jim...'not updated in the last 30 days'
284087
292709
[email protected].....
Subject: 'Project for: ' Kim...'not updated in the last 30 days'
185083
190121
190132
190133
190159
190237
284109
286647
294631
322922
[email protected]....
Subject: 'Project for: Joe...'not updated in the last 30 days'
183332
183336
[email protected]......
Subject: 'Project for: Sam...'not updated in the last 30 days'
183876
183877
183879
183880
183881
183882
183883
183884
183886
183887
183888
This table is to shwo you the select statement output. I want to eliminnate the two days that that are less than 30 days since the last update in the last column.
Assigneduser....Email.........Folderrsn...........indate.............maxattemptdate...days past since last update
JIM......... jim@ aol.com.... 284087............. 9/28/2006.......10/5/2006...........690
JIM......... jim@ aol.com.... 292709............. 3/20/2007.......3/28/2007............516
KIM......... kim@ aol.com.... 185083............. 8/31/2004.......2/9/2006............. 928
KIM...........kim@ aol.com.... 190121............. 2/9/2006.........2/9/2006.............928
KIM...........kim@ aol.com.... 190132............. 2/9/2006.........2/9/2006.............928
KIM...........kim@ aol.com.... 190133............. 2/9/2006.........2/9/2006.............928
KIM...........kim@ aol.com.... 190159............. 2/13/2006.......2/14/2006............923
KIM...........kim@ aol.com.... 190237............. 2/23/2006.......2/23/2006............914
KIM...........kim@ aol.com.... 284109............. 9/28/2006.......9/28/2006............697
KIM...........kim@ aol.com.... 286647............. 11/7/2006.......12/5/2006............629
KIM...........kim@ aol.com.... 294631............. 4/2/2007.........3/4/2008.............174
KIM...........kim@ aol.com.... 322922............. 7/29/2008.......7/29/2008............27
JOE...........joe@ aol.com.... 183332............. 1/28/2004.......4/23/2004............1585
JOE...........joe@ aol.com.... 183336............. 1/28/2004.......3/9/2004.............1630
SAM...........sam@ aol.com....183876.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183877.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183879.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183880.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183881.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183882.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183883.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183884.............3/5/2004.........3/8/2004............ 1631
SAM...........sam@ aol.com....183886.............3/5/2004.........3/8/2004............ 1631
SAM...........sam@ aol.com....183887.............3/5/2004.........3/8/2004............ 1631
SAM...........sam@ aol.com....183888.............3/5/2004.........3/8/2004............ 1631
PAT...........pat@ aol.com.....291630.............2/23/2007.......7/8/2008............ 48
PAT...........pat@ aol.com.....313990.............2/27/2008.......7/28/2008............28
NED...........ned@ aol.com.....190681.............4/4/2006........8/10/2006............746
NED...........ned@ aol.com......95467.............6/14/2006.......11/6/2006............658
NED...........ned@ aol.com......286688.............11/8/2006.......10/3/2007............327
NED...........ned@ aol.com.....291631.............2/23/2007.......8/21/2008............4
NED...........ned@ aol.com.....292111.............3/7/2007.........2/26/2008............181
NED...........ned@ aol.com.....292410.............3/15/2007.......7/22/2008............34
NED...........ned@ aol.com.....299410.............6/27/2007.......2/27/2008............180
NED...........ned@ aol.com.....303790.............9/19/2007.......9/19/2007............341
NED...........ned@ aol.com.....304268.............9/24/2007.......3/3/2008............ 175
NED...........ned@ aol.com.....308228.............12/6/2007.......12/6/2007............263
NED...........ned@ aol.com.....316689.............3/19/2008.......3/19/2008............159
NED...........ned@ aol.com.....316789.............3/20/2008.......3/20/2008............158
NED...........ned@ aol.com.....317528.............3/25/2008.......3/25/2008............153
NED...........ned@ aol.com.....321476.............6/4/2008.........6/17/2008............69
NED...........ned@ aol.com.....322160.............7/3/2008.........8/21/2008............4
MOE...........moe@ aol.com.....184169.............4/5/2004.......12/5/2006............629
[email protected]/27/2004.......3/8/2004............1631
How do I incorporate a if else statement in the above cursor so the two days less than 30 days since last update are not returned. I do not want to send email if the project have been updated within the last 30 days.
Edited by: user4653174 on Aug 25, 2008 2:40 PManalytical functions: http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96540/functions2a.htm#81409
CASE
http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96624/02_funds.htm#36899
http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96624/04_struc.htm#5997
Incorporating either of these into your query should assist you in returning the desired results. -
I installed Sunbird in one computer and my calendar has all my infos, events, and task that i would like to see on another computer that i just downloaded Sunbird into. Also, is it possible I can access Sunbird on my iphone?
Thank you in advance,Try the forum here - http://forums.mozillazine.org/viewforum.php?f=46 - for help with Sunbird, this forum is for Firefox support.
-
Hoping for some help with a very frustrating issue!
I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud 2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel. I even uninstalled iCloud on the PC and downloaded it again (same version).
The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.” After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
Sound familiar? Any ideas on how to solve this iCloud/Outlook issue? Thanks much in advance!Hoping for some help with a very frustrating issue!
I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud 2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel. I even uninstalled iCloud on the PC and downloaded it again (same version).
The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.” After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
Sound familiar? Any ideas on how to solve this iCloud/Outlook issue? Thanks much in advance! -
Help with HP Laser Printer 1200se
HP Support Line,
Really need your assistance. I have tried both contacting HP by phone (told they no longer support our printer via phone help), the tech told me that I needed to contact HP by e-mail for assistance. I then sent an e-mail for assistance and got that reply today, the reply is as follows "Randall, unfortunately, HP does not offer support via e-mail for your product. However many resources are available on the HP web site that may provide the answer to your inquiry. Support is also available via telephone. A list of technical support numbers can be round at the following URL........." The phone numbers listed are the ones I called and the ones that told me I needed to contact the e-mail support for help.
So here I am looking for your help with my issue.
We just bought a new HP Pavillion Slimline Desk Top PC (as our 6 year old HP Pavillion PC died on us). We have 2 HP printers, one (an all-in-one type printer, used maily for copying and printing color, when needed) is connected and it is working fine with the exception of the scanning option (not supported by Windows 7). However we use our Laser Printer for all of our regular prining needs. This is the HP LaserPrinter 1200se, which is about 6 years old but works really well. For this printer we currently only have a parallel connection type cord and there is not a parallel port on the Slimline HP PC. The printer also has the option to connedt a USB cable (we do not currently have this type of cable).
We posed the following two questions:
1. Is the Laser Jet 1200se compatible with Windows 7?
and if this is the case
2. Can we purchase either a) a USC connection cord (generic or do we need a printer specific cord)? or b) is there there a printer cable converter adapater to attach to our parallel cable to convert to a USB connection?
We do not want to purchase the USB cable if Windows 7 will not accept the connection, or if doing this will harm the PC.
We really would appreciate any assitance that you might give us.
Thank you,
Randy and Leslie GibsonSorry, both cannot be enabled by design. That said, devices on a network do not care how others are connected. You can print from a wireless connection to a wired (Ethernet) printer and v/v.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
Going to Australia and need help with Power converters
Facts:
US uses 110v on 60hz
Australia 220v on 50hz
Making sure I understood that correctly. Devices I plan on bringing that will use power are PS3 Slim, MacBook Pro 2008 model, and WD 1TB External HDD. My DS, and Cell are charging via USB to save trouble of other cables.
Ideas I've had or thought of:
1. Get a power converter for a US Powerstrip, and then plug in my US items into the strip and then the strip into an AUS Converter into Australian outlet. Not sure if this fixes the voltage/frequency change.
2. Get power converters for all my devices. But, not sure if my devices needs ways of lowering the voltage/increasing frequency or something to help with the adjustment.
3. Buy a universal powerstrip, which is extremely costly and I wouldn't be able to have here in time (I leave Thursday). Unless Best Buy carrys one.godzillafan868 wrote:
Facts:
US uses 110v on 60hz
Australia 220v on 50hz
Making sure I understood that correctly. Devices I plan on bringing that will use power are PS3 Slim, MacBook Pro 2008 model, and WD 1TB External HDD. My DS, and Cell are charging via USB to save trouble of other cables.
Ideas I've had or thought of:
1. Get a power converter for a US Powerstrip, and then plug in my US items into the strip and then the strip into an AUS Converter into Australian outlet. Not sure if this fixes the voltage/frequency change.
2. Get power converters for all my devices. But, not sure if my devices needs ways of lowering the voltage/increasing frequency or something to help with the adjustment.
3. Buy a universal powerstrip, which is extremely costly and I wouldn't be able to have here in time (I leave Thursday). Unless Best Buy carrys one.
Check the specs on input voltage/frequency of your power supplies.
Many laptop power supplies are "universal/global" and are specced something like 80-265 volts AC 50/60 Hz, but not all. These will just need a connector adapter.
Unsure about the PS3 Slim - if it isn't universal it could be difficult as you'll need a 110/220 transformer, one big enough (power-handling wise) for the PS3 will be very bulky.
For the external WD HDD, if it doesn't have a universal supply, you're probably best off just finding a new wallwart for it that is capable of running on 220/50.
*disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies. -
Creation of context sensitive help with pure FM 12 usage doesn't work
Hi,
I hope somebody is able to help me with a good hint or tip.
I am trying to create a context-sensitive Microsoft Help with FM12 only using the abilities of FM (no RoboHelp). For some reasons, my assigned ID's are not used in the generated chm file and therefore the help does not work context-sensitively.
What did I do?
- I created my FM files and assigned topic aliases to the headers. I did this two ways: a) using the "Special" menue and assigning a CSH marker and/or b) setting a new marker of type "Topic Alias" and typing the ID. I used only numeric IDs like "2000" or "4200",
- I created a .h file (projectname.h) - based on the format of the file projectname_!Generated!.h (I read this in some instructions). So the .h file (text file) looks like this:
#define 2000 2000 /* 4 Anwendungsoberfläche */
#define 2022 2022 /* 4.1.1 Menü Datei */
#define 2030 2030 /* 4.1.3 Menü Parametersatz */
#define 2180 2180 /* 6.6.7 Objektdialog Q-Regler */
#define 2354 2354 /* 6.9.2 Objektdialog Extran Parameter */
#define 2560 2560 /* 6.9.5 Objektdialog Extran2D Parametersatz */
- I published the Microsoft HTML Help. A projectname_!Generated!.h has been created. My IDs were not used in this file:
#define 2000 1
#define 2022 2
#define 2030 3
#define 2180 4
#define 2354 5
#define 2560 6
- When I open the .chm file and look in the source code, the ID even is totally different. It is not the one, I assigned in FM, it is not the one which I assigned in the projectname.h file and it even is not the one, which was put in the projectname_!Generated!.h file. It is a generated name starting with CSH_1 ...n in a consecutive way numbered.
Example:
<p class="FM_Heading1"><a name="XREF_72066_13_Glossar"></a>Gloss<a name="CSH_1"></a>ar</p>
What goes wrong? Why does FM not take my assigned IDs? I need to use these IDs since our programmers are using those already - I had to re-create the whole online help but the programs stay untouched.
Please help!
Many thanks
MohiHi Jeff,
thanks for your note!
The text in my marker is just a number like "2000" or "4200". As said, I created manually a my.h file and used this marker there. E.g.
#define 2000 2000.
Whereby the first 2000 (in my opinion) is the marker text and the second 2000 is the context ID which the programmers are using for the context sensitive call of the help. My definitions in the my.h file were translated to #define 2000 1 (in the my_!Generated!.h file). The source code "translates" the context ID into CSH_8.
I am still confused :-/
Thanks
Mohi -
Need help with Boot Camp and Win 7
I have iMac 27" (iMac11,1) 2.8 GHz, quad core, 8MB of L3, 8GB of Memory, Boot ROM Version IM111.0034.B02 and SMC Version 1.54f36 and can't get this machine to run Windows 7 using Boot Camp. I have successfully loaded Win 7 but when it claims to be starting I only get a black screen after initial start up.
I have checked and rechecked my software updates and have read and reread the instructions, however, I can't update my Boot Camp to 3.1 (my machine says i'm running 3.0.4) and I need 3.1 but can't load 3.1 because it is an exe file that has to be loaded into Windows after I load Windows but can't open Windows because I can't load Boot Camp 3.1. That's my excuse anyway, so I'm missing something I just can't figure out what it is....this is where you come in!
Thanks.
MikeMike,
I'm not going to be much help with Boot Camp however I can direct you to the Boot Camp forum where there are more people that know how to troubleshoot it and Windoze 7. You can find it at:
https://discussions.apple.com/community/windows_software/boot_camp
Roger -
Can some help with CR2 files ,Ican`t see CR2 files in adobe bridge
can some help with CR2 files ,I can`t see CR2 files in adobe bridge when I open Adobe Photoshop cs5- help- about plugins- no camera raw plugins. When i go Edit- preference and click on camera raw shows message that Adobe camera raw plugin cannot be found
That's strage. Seems that the Camera Raw.8bi file has been moved to different location or has gone corrupt. By any chance did you try to move the camera raw plugin to a custom location?
Go To "C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\CS5\File Formats" and look for Camera Raw.8bi file.
If you have that file there, try to download the updated camera raw plugin from the below location.
http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5371&fileID=5001
In case you ae not able to locate the Camera Raw.8bi file on the above location, then i think you need to re-install PS CS5.
[Moving the discussion to Photoshop General Discussions Forum] -
Be grateful for your help with Photoshop Elements which I have been using for several years.
Be grateful for your help with Photoshop Elements which I have been using for several years. Does Elements need to have access to ‘My Pictures’ on Windows as when I remove Photos from ‘My Pictures’, Elements later, when backing up, gives a message that it is unable to ‘reconnect’ to the same picture on elements. On other occasions when removing a photo from Elements catalogue I also get a similar message when backing up saying ‘unable to reconnect’. 1. Is there a relationship between Elements and My Pictures and is Elements dependant on the Windows ‘My Pictures’? 2. Why does some photos in Elements in some cases cause them to multiply e.g. double; triple; quadruple; and on occasions even more? Is there something I need to do to stop this or an easy way I can remove the multiples without spending hours doing it manually one by one? Am I doing something wrong? My O/S is Windows XP SP2 and windows Vista on my Laptop. I have been using Elements 5 and have just purchased Photoshop Elements 8.0. (Upgrade) and about to install it. Be grateful for any advice as I do enjoy using the program if only I can resolve this issue. I am not a PC wiz and mainly use Elements to catalogue photos from which I compile collections and from them slide shows with music. Any advice appreciated Sonny.t PS Have tried to post this previously but without success so hoping to see message appear and a +response
The organizer doesn't care where you send your photos when you download them via the downloader or where they happen to be when you first bring them in if you use the Get Photos command, but once your pics are in the Organizer, you *must* move them from within organizer or it can't find them. You don't have to use My Pictures at all if you don't want to, but regardless of the folder where you put your photos, if you want them someplace else, you use organizer to do it.
-
Query Help with Parent, Child, Child's Child
Hi all,
Need some help with a query. I'm trying to create a stored procedure that is sort of like a Customer, Order, Order, Details. In my situation the tables are different but nevertheless, I want to grab all the fields from the Parent, Child,
and Childs' Child, where the Parent.ParentID = @Parameter. I tried this:
CREATE PROCEDURE [dbo].[spGetCompleteProjectXML]
@ProjectID int = 0
AS
SELECT *,
(SELECT *,
(SELECT *
FROM PageControls
WHERE (PageControls.ProjectPageID = ProjectPages.ProjectPageID))
FROM ProjectPages
WHERE (ProjectPages.ProjectID = @ProjectID))
FROM Projects
WHERE (ProjectID = @ProjectID)
FOR XML AUTO, ELEMENTS
RETURN 0
I think I'm close, but it was my best effort. Could someone help?
thanks in advanceHi TPolo,
Regarding your description, are you looking for a sample like below?
CREATE TABLE customer(customerID INT, name VARCHAR(99))
INSERT INTO customer VALUES(1,'Eric')
INSERT INTO customer VALUES(2,'Nelson')
CREATE TABLE orders(orderID INT,customerID INT)
INSERT INTO orders VALUES(1,1);
INSERT INTO orders VALUES(2,1)
INSERT INTO orders VALUES(3,2)
INSERT INTO orders VALUES(4,2)
CREATE TABLE orderDetails(orderID INT,item VARCHAR(99))
INSERT INTO orderDetails VALUES(1,'APPLE1')
INSERT INTO orderDetails VALUES(1,'BANANA1')
INSERT INTO orderDetails VALUES(2,'APPLE2')
INSERT INTO orderDetails VALUES(2,'BANANA2')
INSERT INTO orderDetails VALUES(3,'APPLE3')
INSERT INTO orderDetails VALUES(3,'BANANA3')
INSERT INTO orderDetails VALUES(4,'APPLE4')
INSERT INTO orderDetails VALUES(4,'BANANA5')
SELECT customer.customerID,customer.name,
(SELECT orderId,
SELECT item FROM orderDetails WHERE orderID=orders.orderID FOR XML AUTO,TYPE,ELEMENTS
FROM orders Where customerID=customer.customerID FOR XML AUTO,TYPE,ELEMENTS)
FROM customer WHERE customerID=1
FOR XML AUTO,ELEMENTS
DROP TABLE customer,orderDetails,orders
If you have any feedback on our support, please click
here.
Eric Zhang
TechNet Community Support -
Hi Gurus,
Can someone please help me out.
I've a below tables.
1) tbl_link --> this table contains information at profile level
2) tbl_summary --> this table contains summary at parent profile level derived from tbl_link table
One parent profile contains multiple child profiles and each child profile links to a code (which is B, W, G or P) and the code is linked to a category (i.e. ONL and OFL). In this case code B is linked to category 'ONL' and codes W,G,P linked to OFL category.
ONL category needs 100 points. If it don't have enough points then i need to borrow from OFL category which i'm doing and populating into tbl_summary table at parent profile level.
Now i need to insert data into tbl_link table at profile level with howmany points used, expired based on tbl_summary table. Rule is at the end of month if we add points for each profile in tbl_link table it should come as 0.
with
tbl_SUMMARY as
select 1 as ppid,'ONL' as catgcode, 53 as earned_points,47 BORROWED_POINTS,100 CERT_POINTS,0 DISCARD_POINTS,100 used from dual
union
select 1 as ppid,'OFL' as catgcode, 223 as earned_points,0 BORROWED_POINTS,176 CERT_POINTS,76 DISCARD_POINTS,100 used from dual
union
select 2 as ppid,'ONL' as catgcode, 39 as earned_points,61 BORROWED_POINTS,100 CERT_POINTS,0 DISCARD_POINTS,100 used from dual
union
select 2 as ppid,'OFL' as catgcode, 90 as earned_points,0 BORROWED_POINTS,29 CERT_POINTS,29 DISCARD_POINTS,100 used from dual
union
select 3 as ppid,'ONL' as catgcode, 109 as earned_points,0 BORROWED_POINTS,109 CERT_POINTS,9 DISCARD_POINTS,100 used from dual
union
select 3 as ppid,'OFL' as catgcode, 223 as earned_points,0 BORROWED_POINTS,223 CERT_POINTS,23 DISCARD_POINTS,200 used from dual
union
select 4 as ppid,'ONL' as catgcode, 109 as earned_points,0 BORROWED_POINTS,109 CERT_POINTS,9 DISCARD_POINTS,100 used from dual
union
select 4 as ppid,'OFL' as catgcode, 169 as earned_points,0 BORROWED_POINTS,169 CERT_POINTS,69 DISCARD_POINTS,100 used from dual
tbl_link as
select 1 as ppid,1 as pid, 'B' as code,'ONL' as catgcode, 53 as earned_points from dual
union
select 1 as ppid,12 as pid, 'W' as code,'OFL' as catgcode, 26 as earned_points from dual
union
select 1 as ppid,13 as pid, 'G' as code,'OFL' as catgcode, 87 as earned_points from dual
union
select 1 as ppid,14 as pid, 'P' as code,'OFL' as catgcode, 110 as earned_points from dual
union
select 2 as ppid,2 as pid, 'B' as code,'ONL' as catgcode, 39 as earned_points from dual
union
select 2 as ppid,22 as pid, 'W' ,'OFL' as catgcode, 30 as earned_points from dual
union
select 2 as ppid,23 as pid, 'G' ,'OFL' as catgcode, 29 as earned_points from dual
union
select 2 as ppid,24 as pid, 'P' ,'OFL' as catgcode, 31 as earned_points from dual
union
select 3 as ppid,3 as pid, 'B' as code,'ONL' as tier_catgcode, 109 as earned_points from dual
union
select 3 as ppid,32 as pid, 'W' ,'OFL' , 26 as earned_points from dual
union
select 3 as ppid,33 as pid, 'G' ,'OFL', 87 as earned_points from dual
union
select 3 as ppid,34 as pid, 'P' ,'OFL' , 110 as earned_points from dual
union
select 4 as ppid,4 as pid, 'B' as code,'ONL' as catgcode, 109 as earned_points from dual
union
select 4 as ppid,42 as pid, 'W' as code,'OFL' , 26 as earned_points from dual
union
select 4 as ppid,43 as pid, 'G' as code,'OFL' , 87 as earned_points from dual
union
select 4 as ppid,44 as pid, 'P' as code,'OFL' , 56 as earned_points from dual
final (PARENT_PROFILE_ID,PROFILE_ID,catgcode,EARNED_POINTS,BORROWED_POINTS,CERT_POINTS,DISCARD_POINTS,USED)
as (
select A.PPID PARENT_PROFILE_ID,B.PID PROFILE_ID,A.catgcode,B.EARNED_POINTS,BORROWED_POINTS,CERT_POINTS,DISCARD_POINTS,USED
from tbl_SUMMARY a,tbl_link b where a.ppid=b.ppid AND A.catgcode=B.catgcode
ORDER BY PROFILE_ID
select * from final order by 1;
PARENT_PROFILE_ID PROFILE_ID CATGCODE EARNED_POINTS BORROWED_POINTS CERT_POINTS DISCARD_POINTS USED
1 1 ONL 53 47 100 0 100
1 14 OFL 110 0 176 76 100
1 13 OFL 87 0 176 76 100
1 12 OFL 26 0 176 76 100
2 2 ONL 39 61 100 0 100
2 24 OFL 31 0 29 29 100
2 23 OFL 29 0 29 29 100
2 22 OFL 30 0 29 29 100
3 32 OFL 26 0 223 23 200
3 33 OFL 87 0 223 23 200
3 34 OFL 110 0 223 23 200
3 3 ONL 109 0 109 9 100
4 42 OFL 26 0 169 69 100
4 43 OFL 87 0 169 69 100
4 44 OFL 56 0 169 69 100
4 4 ONL 109 0 109 9 100
Need Output as below :
For parent profile 1, whatever i mentioned above is not correct. Borrowed 47 points from OFL to ONL to make ONL and also from OFL category has 176 points remaining after lending to ONL and using only 100 points, remaining 76 points are discarded. Need to deduct these 76 points also from child profiles. Output will be as below.
PARENT_PROFILE_ID PROFILE_ID CATGCODE EARNED_POINTS BORROWED_POINTS CERT_POINTS DISCARD_POINTS USED BURN_PTS EXPIRE_PTS
1 1 ONL 53 47 100 0 100 -53 0
1 12 OFL 26 0 176 76 100 -26 0
1 13 OFL 87 0 176 76 100 -74 -13
1 14 OFL 110 0 176 76 100 -47 -63
For parent profile id 2 --> ONL category has 39 points, so borrowed 61 points from OFL category to make ONL points 100.
Now need to populate tbl_link table at child profile level (i.e. child profiles 22,23,24).
Borrowed 61 points from OFL and need to deduct this points from the profile which has highest earned points, in this case deduct from profile 24 which has 31 points, from profile 22 which has 30 points. Need output like below
PARENT_PROFILE_ID PROFILE_ID CATGCODE EARNED_POINTS BORROWED_POINTS CERT_POINTS DISCARD_POINTS USED BURN_PTS EXPIRE_PTS
2 2 ONL 39 61 100 0 100 -39 0
2 22 OFL 30 0 29 29 100 -30 0
2 23 OFL 29 0 29 29 100 0 -29
2 24 OFL 31 0 29 29 100 -31 0
For parent profile id 3 --> ONL category has 109 points, so no need to borrow points from OFL category
Now need to populate tbl_link table at child profile level (i.e. child profiles 32,33,34).
in this case ONL has 100 points, so move the remaining 9 points will be expired. OFL category has 223 points total. need only 200 points (i.e. mutiple of 100) for our process, 23 points will be expired and has to deduct from the profile which has highest earned points, in this case from profile 34. Output :
PARENT_PROFILE_ID PROFILE_ID CATGCODE EARNED_POINTS BORROWED_POINTS CERT_POINTS DISCARD_POINTS USED BURN_PTS EXPIRE_PTS
3 3 ONL 109 0 109 9 100 -100 -9
3 32 OFL 26 0 223 23 200 -26 0
3 33 OFL 87 0 223 23 200 -87 0
3 34 OFL 110 0 223 23 200 -87 -23
For parent profile id 4 --> ONL category has 109 points, so no need to borrow points from OFL category
Now need to populate tbl_link table at child profile level (i.e. child profiles 42,43,44).
in this case ONL has 100 points, so move the remaining 9 points will be expired. OFL category has 169 points total. need only 100 points (i.e. mutiple of 100) for our process, 69 points will be expired and has to deduct from the profile which has highest earned points, in this case from profile 43. Output :
PARENT_PROFILE_ID PROFILE_ID CATGCODE EARNED_POINTS BORROWED_POINTS CERT_POINTS DISCARD_POINTS USED BURN_PTS EXPIRE_PTS
4 4 ONL 109 0 109 9 100 100 9
4 42 OFL 26 0 169 69 100 -26 0
4 43 OFL 87 0 169 69 100 -18 -69
4 44 OFL 56 0 169 69 100 -56 0
Can someone help with the query. I googled about looping in sql and came to know that Oracle has a feature MODEL to loop in SQL, but i don't have idea on using MODEL clause.
Appreciate your help!
Thanks
SriHi Gurus,
Can someone please help me out.
I've a below tables.
1) tbl_link --> this table contains information at profile level
2) tbl_summary --> this table contains summary at parent profile level derived from tbl_link table
One parent profile contains multiple child profiles and each child profile links to a code (which is B, W, G or P) and the code is linked to a category (i.e. ONL and OFL). In this case code B is linked to category 'ONL' and codes W,G,P linked to OFL category.
ONL category needs 100 points. If it don't have enough points then i need to borrow from OFL category which i'm doing and populating into tbl_summary table at parent profile level.
Now i need to insert data into tbl_link table at profile level with howmany points used, expired based on tbl_summary table. Rule is at the end of month if we add points for each profile in tbl_link table it should come as 0.
with
tbl_SUMMARY as
select 1 as ppid,'ONL' as catgcode, 53 as earned_points,47 BORROWED_POINTS,100 CERT_POINTS,0 DISCARD_POINTS,100 used from dual
union
select 1 as ppid,'OFL' as catgcode, 223 as earned_points,0 BORROWED_POINTS,176 CERT_POINTS,76 DISCARD_POINTS,100 used from dual
union
select 2 as ppid,'ONL' as catgcode, 39 as earned_points,61 BORROWED_POINTS,100 CERT_POINTS,0 DISCARD_POINTS,100 used from dual
union
select 2 as ppid,'OFL' as catgcode, 90 as earned_points,0 BORROWED_POINTS,29 CERT_POINTS,29 DISCARD_POINTS,100 used from dual
union
select 3 as ppid,'ONL' as catgcode, 109 as earned_points,0 BORROWED_POINTS,109 CERT_POINTS,9 DISCARD_POINTS,100 used from dual
union
select 3 as ppid,'OFL' as catgcode, 223 as earned_points,0 BORROWED_POINTS,223 CERT_POINTS,23 DISCARD_POINTS,200 used from dual
union
select 4 as ppid,'ONL' as catgcode, 109 as earned_points,0 BORROWED_POINTS,109 CERT_POINTS,9 DISCARD_POINTS,100 used from dual
union
select 4 as ppid,'OFL' as catgcode, 169 as earned_points,0 BORROWED_POINTS,169 CERT_POINTS,69 DISCARD_POINTS,100 used from dual
tbl_link as
select 1 as ppid,1 as pid, 'B' as code,'ONL' as catgcode, 53 as earned_points from dual
union
select 1 as ppid,12 as pid, 'W' as code,'OFL' as catgcode, 26 as earned_points from dual
union
select 1 as ppid,13 as pid, 'G' as code,'OFL' as catgcode, 87 as earned_points from dual
union
select 1 as ppid,14 as pid, 'P' as code,'OFL' as catgcode, 110 as earned_points from dual
union
select 2 as ppid,2 as pid, 'B' as code,'ONL' as catgcode, 39 as earned_points from dual
union
select 2 as ppid,22 as pid, 'W' ,'OFL' as catgcode, 30 as earned_points from dual
union
select 2 as ppid,23 as pid, 'G' ,'OFL' as catgcode, 29 as earned_points from dual
union
select 2 as ppid,24 as pid, 'P' ,'OFL' as catgcode, 31 as earned_points from dual
union
select 3 as ppid,3 as pid, 'B' as code,'ONL' as tier_catgcode, 109 as earned_points from dual
union
select 3 as ppid,32 as pid, 'W' ,'OFL' , 26 as earned_points from dual
union
select 3 as ppid,33 as pid, 'G' ,'OFL', 87 as earned_points from dual
union
select 3 as ppid,34 as pid, 'P' ,'OFL' , 110 as earned_points from dual
union
select 4 as ppid,4 as pid, 'B' as code,'ONL' as catgcode, 109 as earned_points from dual
union
select 4 as ppid,42 as pid, 'W' as code,'OFL' , 26 as earned_points from dual
union
select 4 as ppid,43 as pid, 'G' as code,'OFL' , 87 as earned_points from dual
union
select 4 as ppid,44 as pid, 'P' as code,'OFL' , 56 as earned_points from dual
final (PARENT_PROFILE_ID,PROFILE_ID,catgcode,EARNED_POINTS,BORROWED_POINTS,CERT_POINTS,DISCARD_POINTS,USED)
as (
select A.PPID PARENT_PROFILE_ID,B.PID PROFILE_ID,A.catgcode,B.EARNED_POINTS,BORROWED_POINTS,CERT_POINTS,DISCARD_POINTS,USED
from tbl_SUMMARY a,tbl_link b where a.ppid=b.ppid AND A.catgcode=B.catgcode
ORDER BY PROFILE_ID
select * from final order by 1;
PARENT_PROFILE_ID PROFILE_ID CATGCODE EARNED_POINTS BORROWED_POINTS CERT_POINTS DISCARD_POINTS USED
1 1 ONL 53 47 100 0 100
1 14 OFL 110 0 176 76 100
1 13 OFL 87 0 176 76 100
1 12 OFL 26 0 176 76 100
2 2 ONL 39 61 100 0 100
2 24 OFL 31 0 29 29 100
2 23 OFL 29 0 29 29 100
2 22 OFL 30 0 29 29 100
3 32 OFL 26 0 223 23 200
3 33 OFL 87 0 223 23 200
3 34 OFL 110 0 223 23 200
3 3 ONL 109 0 109 9 100
4 42 OFL 26 0 169 69 100
4 43 OFL 87 0 169 69 100
4 44 OFL 56 0 169 69 100
4 4 ONL 109 0 109 9 100
Need Output as below :
For parent profile 1, whatever i mentioned above is not correct. Borrowed 47 points from OFL to ONL to make ONL and also from OFL category has 176 points remaining after lending to ONL and using only 100 points, remaining 76 points are discarded. Need to deduct these 76 points also from child profiles. Output will be as below.
PARENT_PROFILE_ID PROFILE_ID CATGCODE EARNED_POINTS BORROWED_POINTS CERT_POINTS DISCARD_POINTS USED BURN_PTS EXPIRE_PTS
1 1 ONL 53 47 100 0 100 -53 0
1 12 OFL 26 0 176 76 100 -26 0
1 13 OFL 87 0 176 76 100 -74 -13
1 14 OFL 110 0 176 76 100 -47 -63
For parent profile id 2 --> ONL category has 39 points, so borrowed 61 points from OFL category to make ONL points 100.
Now need to populate tbl_link table at child profile level (i.e. child profiles 22,23,24).
Borrowed 61 points from OFL and need to deduct this points from the profile which has highest earned points, in this case deduct from profile 24 which has 31 points, from profile 22 which has 30 points. Need output like below
PARENT_PROFILE_ID PROFILE_ID CATGCODE EARNED_POINTS BORROWED_POINTS CERT_POINTS DISCARD_POINTS USED BURN_PTS EXPIRE_PTS
2 2 ONL 39 61 100 0 100 -39 0
2 22 OFL 30 0 29 29 100 -30 0
2 23 OFL 29 0 29 29 100 0 -29
2 24 OFL 31 0 29 29 100 -31 0
For parent profile id 3 --> ONL category has 109 points, so no need to borrow points from OFL category
Now need to populate tbl_link table at child profile level (i.e. child profiles 32,33,34).
in this case ONL has 100 points, so move the remaining 9 points will be expired. OFL category has 223 points total. need only 200 points (i.e. mutiple of 100) for our process, 23 points will be expired and has to deduct from the profile which has highest earned points, in this case from profile 34. Output :
PARENT_PROFILE_ID PROFILE_ID CATGCODE EARNED_POINTS BORROWED_POINTS CERT_POINTS DISCARD_POINTS USED BURN_PTS EXPIRE_PTS
3 3 ONL 109 0 109 9 100 -100 -9
3 32 OFL 26 0 223 23 200 -26 0
3 33 OFL 87 0 223 23 200 -87 0
3 34 OFL 110 0 223 23 200 -87 -23
For parent profile id 4 --> ONL category has 109 points, so no need to borrow points from OFL category
Now need to populate tbl_link table at child profile level (i.e. child profiles 42,43,44).
in this case ONL has 100 points, so move the remaining 9 points will be expired. OFL category has 169 points total. need only 100 points (i.e. mutiple of 100) for our process, 69 points will be expired and has to deduct from the profile which has highest earned points, in this case from profile 43. Output :
PARENT_PROFILE_ID PROFILE_ID CATGCODE EARNED_POINTS BORROWED_POINTS CERT_POINTS DISCARD_POINTS USED BURN_PTS EXPIRE_PTS
4 4 ONL 109 0 109 9 100 100 9
4 42 OFL 26 0 169 69 100 -26 0
4 43 OFL 87 0 169 69 100 -18 -69
4 44 OFL 56 0 169 69 100 -56 0
Can someone help with the query. I googled about looping in sql and came to know that Oracle has a feature MODEL to loop in SQL, but i don't have idea on using MODEL clause.
Appreciate your help!
Thanks
Sri -
Query Help with Item Master & Warehouse Code
Forum,
I would like help with a query to identify any items within a database where a particular warehouse code does NOT exist against it. At present I have the following:
select T0.ItemCode, T1.WhsCode from OITM T0
INNER JOIN OITW T1 on T0.ItemCode = T1.ItemCode
where T0.ItemCode NOT IN ('WHS1')
This is returning all other instance and not just a list of item codes where 'WHS1' is missing from within the 'Stock Data' tab.
Thanks,
SarahHi Sarah...
Try This
SELECT T0.ItemCode, T0.ItemName, T1.WhsCode
FROM OITM T0 INNER JOIN OITW T1 ON T0.ItemCode = T1.ItemCode
WHERE T1.WhsCode not in ( 'WHS1')
Regards
Kennedy
Maybe you are looking for
-
Messages field only showing Text Messages
Hi For no apparent reason my 'Messages' has started to show only 'Text Messages' (ie no emails). I tried the Help function which directed me to 'options', but I only get 'Genereal Text Message' options. Help please..! Thanks Richard Solved! Go to Sol
-
After upgrading to 10.6 I can no longer use AppleTalk to connect to my HP LaserJet 4ML printer. So I am now using a JetDirect 300X box connected to the parallel port of the printer and an ethernet cable into my Linksys router. But I have had no luck
-
Sorting non numeric column based on numeric column value
APEX 3.1 - RDBMS 10Gr2 In this example, I have a report with 2 columns: (1) numeric IP address (no periods embedded) and (2) varchar IP address (IP address with periods). I would like to display the varchar IP column on the report but sort by the num
-
I opened a high density .tiff file in photoshop but I cannot move the object
I opened a high density .tiff file in photoshop but I cannot move the object
-
In Apple Mail Inbox window after replying to an e-mail then clicking on the reply arrow icon to see the reply, I get the error dialog box "Mail was unable to find your reply to the message "SUBJECT". You my have deleted the message. Also, when I chec