Help with multiple variable

I'm trying to write a query which pulls shipment information
from an access database. Then it grabs the weight of each shipments
and multiplies it by the corresponding rate depending on its weight
class.
I'm using the CFIF, CFELSEIF and CFSET tags to try to
accopmlisht this, making it look something like this
<CFIF "Shipments.weight" LT 500 >
<cfset Shipments.rate = 7.5 >
<CFELSEIF "Shipments.weight" GT 499 LT 1000 >
<cfset Shipments.rate = 7 >
<CFELSEIF "Shipments.weight" GT 999 LT 2000 >
<cfset Shipments.rate = 6.5 >
<CFELSEIF "Shipments.weight" GT 1999 LT 5000 >
<cfset Shipments.rate = 5 >
<CFELSEIF "Shipments.weight" GT 4999 >
<cfset Shipments.rate = 3.65 >
</CFIF>
then in the Output tag I use this CFSCRIPT
<cfscript>
WriteOutput(#ACC_Report.weight#/100*#Shipments.rate#);
</cfscript>
It runs fine but it only seems to grab either the first or
the second set rate variables and multiplies all the weights in the
output query by it, inetead of logically choosing its weight class.
Any help, perhaps I'm using the wrong logic.
Thanks in advance

"There's no such thing as "greater-than-ness" on string data"
Adam, everything you said is basically true and relevant to
the original
poster's issue. But this line is wrong is it not? Isn't
comparing one
string to another and determining which is greater or lesser
the essence
of sorting a set of strings into an alphabetical order?
Now, I am not sure I can remember the last time I had to
write my own
sort routine. But I am pretty sure when I did for sorting
string data,
I communally compared one to another to see which was greater
and|or
lesser then the other.
To reiterate in the original post, the person is comparing
the string
constants "Shipments.weight" to the numbers do to the
improper quotes,
not the value in the Shipments.weight variable.
Also, if one cares, the logic could be greatly simplified
with some
basic boolean logic. The lower range comparisons are
unnecessary.
<CFIF Shipments.weight LT 500 >
<!--- weight is less then 500 --->
<cfset Shipments.rate = 7.5 >
<CFELSEIF Shipments.weight LT 1000 >
<!--- weight is greater then equal to 500 it was not
caught in first
branch, but it is also less then 1000 --->
<cfset Shipments.rate = 7 >
<CFELSEIF Shipments.weight LT 2000 >
<!--- weight is greater then equal to 1000 it was not
caught in any
previous branch, but it is also less then 2000--->
<cfset Shipments.rate = 6.5 >
<CFELSEIF Shipments.weight LT 5000 >
<!--- weight is greater then equal to 2000 it was not
caught in any
previous branch, but it is also less then 5000--->
<cfset Shipments.rate = 5 >
<CFELSE>
<!--- weight is greater then equal to 5000 it was not
caught in any
previous branch--->
<cfset Shipments.rate = 3.65 >
</CFIF>

Similar Messages

  • Execute scenario with multiple variables through ODIInvoke webservice

    I am looking to execute scenario with multiple variables through ODIInvoke webservice but can't seem to get the SOAP request formatted correctly. Here is what I have tried but I get a parsing error.
    <invokeScenarioRequest>
    <invokeScenarioRequest>
    <RepositoryConnection>
    <JdbcDriver>org.hsqldb.jdbcDriver</JdbcDriver>
    <JdbcUrl>jdbc:hsqldb:hsql://localhost</JdbcUrl>
    <JdbcUser>sa</JdbcUser>
    <OdiUser>SUPERVISOR</OdiUser>
    <OdiPassword>SUNOPSIS</OdiPassword>
    <WorkRepository>DEVELOPMENT</WorkRepository>
    </RepositoryConnection>
    <Command>
    <ScenName>I_TEST_WS</ScenName>
    <ScenVersion>001</ScenVersion>
    <Context>DEVELOPMENT</Context>
    <LogLevel>5</LogLevel>
    <SyncMode>1</SyncMode>
    <Variables>
    <Name>SNI.DMN_CD</Name>
    <Value>DTA</Value>
    </Variables>
    <Variables>
    <Name>SNI.ADPT_CD</Name>
    <Value>RAT_CD</Value>
    </Variables>
    </Command>
    <Agent>
    <Host>S119SNIP045166</Host>
    <Port>20910</Port>
    </Agent>
    </invokeScenarioRequest>
    </invokeScenarioRequest>
    Here is the error I am getting
    com.sunopsis.wsinvocation.SnpsWSInvocationException: java.lang.RuntimeException: Unexpected subelement Name
         at com.sunopsis.wsinvocation.client.a.a.d.requestReply(d.java)
         at com.sunopsis.graphical.wsclient.f.b(f.java)
         at com.sunopsis.graphical.tools.utils.swingworker.v.call(v.java)
         at edu.emory.mathcs.backport.java.util.concurrent.FutureTask.run(FutureTask.java:176)
         at com.sunopsis.graphical.tools.utils.swingworker.l.run(l.java)
         at edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:665)
         at edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:690)
         at java.lang.Thread.run(Thread.java:595)
    Caused by: java.lang.RuntimeException: Unexpected subelement Name
         at org.apache.axis.message.SOAPFaultBuilder.createFault(SOAPFaultBuilder.java:222)
         at org.apache.axis.message.SOAPFaultBuilder.endElement(SOAPFaultBuilder.java:129)
         at org.apache.axis.encoding.DeserializationContext.endElement(DeserializationContext.java:1087)
         at org.apache.crimson.parser.Parser2.maybeElement(Parser2.java:1515)
         at org.apache.crimson.parser.Parser2.content(Parser2.java:1766)
         at org.apache.crimson.parser.Parser2.maybeElement(Parser2.java:1494)
         at org.apache.crimson.parser.Parser2.content(Parser2.java:1766)
         at org.apache.crimson.parser.Parser2.maybeElement(Parser2.java:1494)
         at org.apache.crimson.parser.Parser2.parseInternal(Parser2.java:500)
         at org.apache.crimson.parser.Parser2.parse(Parser2.java:305)
         at org.apache.crimson.parser.XMLReaderImpl.parse(XMLReaderImpl.java:433)
         at javax.xml.parsers.SAXParser.parse(SAXParser.java:375)
         at org.apache.axis.encoding.DeserializationContext.parse(DeserializationContext.java:227)
         at org.apache.axis.SOAPPart.getAsSOAPEnvelope(SOAPPart.java:696)
         at org.apache.axis.Message.getSOAPEnvelope(Message.java:435)
         at org.apache.axis.handlers.soap.MustUnderstandChecker.invoke(MustUnderstandChecker.java:62)
         at org.apache.axis.client.AxisClient.invoke(AxisClient.java:206)
         at org.apache.axis.client.Call.invokeEngine(Call.java:2784)
         at org.apache.axis.client.Call.invoke(Call.java:2767)
         at org.apache.axis.client.Call.invoke(Call.java:1792)
         at com.sunopsis.wsinvocation.client.a.a.d.a(d.java)
         ... 8 more
    Caused by:
    AxisFault
    faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Client
    faultSubcode:
    faultString: java.lang.RuntimeException: Unexpected subelement Name
    faultActor:
    faultNode:
    faultDetail:
         {http://xml.apache.org/axis/}stackTrace:java.lang.RuntimeException: Unexpected subelement Name
         at org.apache.axis.message.SOAPFaultBuilder.createFault(SOAPFaultBuilder.java:222)
         at org.apache.axis.message.SOAPFaultBuilder.endElement(SOAPFaultBuilder.java:129)
         at org.apache.axis.encoding.DeserializationContext.endElement(DeserializationContext.java:1087)
         at org.apache.crimson.parser.Parser2.maybeElement(Parser2.java:1515)
         at org.apache.crimson.parser.Parser2.content(Parser2.java:1766)
         at org.apache.crimson.parser.Parser2.maybeElement(Parser2.java:1494)
         at org.apache.crimson.parser.Parser2.content(Parser2.java:1766)
         at org.apache.crimson.parser.Parser2.maybeElement(Parser2.java:1494)
         at org.apache.crimson.parser.Parser2.parseInternal(Parser2.java:500)
         at org.apache.crimson.parser.Parser2.parse(Parser2.java:305)
         at org.apache.crimson.parser.XMLReaderImpl.parse(XMLReaderImpl.java:433)
         at javax.xml.parsers.SAXParser.parse(SAXParser.java:375)
         at org.apache.axis.encoding.DeserializationContext.parse(DeserializationContext.java:227)
         at org.apache.axis.SOAPPart.getAsSOAPEnvelope(SOAPPart.java:696)
         at org.apache.axis.Message.getSOAPEnvelope(Message.java:435)
         at org.apache.axis.handlers.soap.MustUnderstandChecker.invoke(MustUnderstandChecker.java:62)
         at org.apache.axis.client.AxisClient.invoke(AxisClient.java:206)
         at org.apache.axis.client.Call.invokeEngine(Call.java:2784)
         at org.apache.axis.client.Call.invoke(Call.java:2767)
         at org.apache.axis.client.Call.invoke(Call.java:1792)
         at com.sunopsis.wsinvocation.client.a.a.d.a(d.java)
         at com.sunopsis.wsinvocation.client.a.a.d.requestReply(d.java)
         at com.sunopsis.graphical.wsclient.f.b(f.java)
         at com.sunopsis.graphical.tools.utils.swingworker.v.call(v.java)
         at edu.emory.mathcs.backport.java.util.concurrent.FutureTask.run(FutureTask.java:176)
         at com.sunopsis.graphical.tools.utils.swingworker.l.run(l.java)
         at edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:665)
         at edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:690)
         at java.lang.Thread.run(Thread.java:595)
         {http://xml.apache.org/axis/}hostname:S119SNIP045166
    java.lang.RuntimeException: Unexpected subelement Name
         at org.apache.axis.message.SOAPFaultBuilder.createFault(SOAPFaultBuilder.java:222)
         at org.apache.axis.message.SOAPFaultBuilder.endElement(SOAPFaultBuilder.java:129)
         at org.apache.axis.encoding.DeserializationContext.endElement(DeserializationContext.java:1087)
         at org.apache.crimson.parser.Parser2.maybeElement(Parser2.java:1515)
         at org.apache.crimson.parser.Parser2.content(Parser2.java:1766)
         at org.apache.crimson.parser.Parser2.maybeElement(Parser2.java:1494)
         at org.apache.crimson.parser.Parser2.content(Parser2.java:1766)
         at org.apache.crimson.parser.Parser2.maybeElement(Parser2.java:1494)
         at org.apache.crimson.parser.Parser2.parseInternal(Parser2.java:500)
         at org.apache.crimson.parser.Parser2.parse(Parser2.java:305)
         at org.apache.crimson.parser.XMLReaderImpl.parse(XMLReaderImpl.java:433)
         at javax.xml.parsers.SAXParser.parse(SAXParser.java:375)
         at org.apache.axis.encoding.DeserializationContext.parse(DeserializationContext.java:227)
         at org.apache.axis.SOAPPart.getAsSOAPEnvelope(SOAPPart.java:696)
         at org.apache.axis.Message.getSOAPEnvelope(Message.java:435)
         at org.apache.axis.handlers.soap.MustUnderstandChecker.invoke(MustUnderstandChecker.java:62)
         at org.apache.axis.client.AxisClient.invoke(AxisClient.java:206)
         at org.apache.axis.client.Call.invokeEngine(Call.java:2784)
         at org.apache.axis.client.Call.invoke(Call.java:2767)
         at org.apache.axis.client.Call.invoke(Call.java:1792)
         at com.sunopsis.wsinvocation.client.a.a.d.a(d.java)
         at com.sunopsis.wsinvocation.client.a.a.d.requestReply(d.java)
         at com.sunopsis.graphical.wsclient.f.b(f.java)
         at com.sunopsis.graphical.tools.utils.swingworker.v.call(v.java)
         at edu.emory.mathcs.backport.java.util.concurrent.FutureTask.run(FutureTask.java:176)
         at com.sunopsis.graphical.tools.utils.swingworker.l.run(l.java)
         at edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:665)
         at edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:690)
         at java.lang.Thread.run(Thread.java:595)
    If I change it from
    <Variables>
    <Name>SNI.DMN_CD</Name>
    <Value>DTA</Value>
    </Variables>
    <Variables>
    <Name>SNI.ADPT_CD</Name>
    <Value>RAT_CD</Value>
    </Variables>
    to
    <Variables>
    <Name>SNI.DMN_CD</Name>
    <Value>DTA</Value>
    </Variables>
    the session runs. Does anyone know the syntax for multiple variables being passed?
    Thank you,
    Troy

    Hi,
    The xml should be like this
    <variables>
    <name>SNI.DMN_CD</name>
    <value>DTA</value>
    <name>SNI.ADPT_CD</name>
    <value>RAT_CD</value>
    </variables>
    Hope this helpful.
    Regards

  • Help with multiple httpservice calls

    I need help with multiple httpservice call back to back, doing 10 different mysql query at startup of the app loading results into 14 datagrids/combobox all queries are to different tables.

    Hello,
    I think what Grizzzzzzzzzz means is the following:
        <mx:HTTPService id="serviceOne"
            url="here goes url"
            result="resultHandler1(event);"
            fault="faultHandler(event);"/>
        <mx:HTTPService id="serviceTwo"
            url="here goes url"
            result="resultHandler2(event);"
            fault="faultHandler(event);"/>
        <mx:HTTPService id="serviceThree"
            url="here goes url"
            result="resultHandler3(event);"
            fault="faultHandler(event);"/>
         // Result handler 1
         private function resultHandler1(event:ResultEvent):void{
              //Here do something with the results
             xmlCollection = event.result as XML;
             //then call the next service
             serviceTwo.send();
          // Result handler 2
          private function resultHandler2(event:ResultEvent):void{
              //Here do something with the results
             xmlCollection = event.result as XML;
             //then call the next service
              serviceThree.send();
    I hope this helps,
    Pierre

  • Help with Report Variables

    I have been doing battle with the SBO Customer Receivables Aging Report. I am trying to add the fields "Customer Reference" and "Creation Date" to the Repetitive area of the report with no success. All of the existing fields are variables, and the on-line help says to contact SAP support (which would be me) for help with changing variables. Does anyne have a list of these variables, or know how to define them?
    Many thanks,
    Mike.

    Hi Mike Stroud, i'm actualy also working on the customer ageing report. You also responded to my post. It was the reports one. Well, im not sure about the variables but i simply wrote a query that brings all that info and more up. But i'm having problems diplsying it. In the normal SAP report/print layout, if i  make the report based on the query it doesn't let me move the info from the repetitive area to the header....why.....can you get around this??? I then did it in the advanced layout but the first page is always wrong. What do you want to do with the variables?? what are you trying to achieve with the report because me and my coleagues have had a BIG problem with the ageing.

  • Help with bind variables

    Hello I'm new to .net and I'm trying to work with bind variables
    I keep getting the ORA-01036: illegal variable name/number error.
    here's my code, can somebody help me out and show me what am I doing wrong?
    Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
    Dim drLocation As OracleDataReader = getSCLocation("SOMEBODY")
    End Sub
    Private Function getSCLocation(ByVal contactName As String) As OracleDataReader
    Dim drLocation As OracleDataReader
    Dim connString As String = ConfigurationManager.ConnectionStrings("scConnString").ConnectionString
    Dim conn As New OracleConnection(connString)
    conn.Open()
    Dim queryString As String = "select a.location, a.location_name from locationm1 a where a.primary_contact_dept in (select b.dept from contactsm1 b where b.contact_name = p_contactName)"
    Dim p_contactName As New OracleParameter
    p_contactName.OracleType = OracleType.VarChar
    p_contactName.Value = contactName
    Dim cmdLocation As New OracleCommand(queryString, conn)
    cmdLocation.Parameters.Add(p_contactName)
    drLocation = cmdLocation.ExecuteReader(CommandBehavior.CloseConnection)
    Return drLocation
    End Function
    Thanks
    Peter

    never mind i got it by playing around with it
    had to change the way to start the bind variable
    Dim p_contactName As New OracleParameter("p_contactName", OracleType.VarChar)
    p_contactName.Size = 140
    p_contactName.Value = contactName

  • Help with ynamic variable evaluation

    Hi guys,
    If someone can point me out to how to evaluate variables as
    part of an expression.
    for ex:
    event.result.reporting.series[0].eval("y"+j+"Label");
    basically how do i write the equivalent of eval in
    flex/actionscript
    Thanks a ton,
    Pranay

    Thanks Greg, saved my day................
    1 more question
    Problem:
    My flex httpservice returns an xml file in the "object"
    resultFormat.
    How could I get the count of all childNodes of an object in
    that returned object tree.
    For example, in the xml file below:
    <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
    <reporting>
    <series>
    <title>Edge Page Views, in Page Views per
    Second</title>
    <xLabel>startdatetime</xLabel>
    <y1Label>sum(pageviews)</y1Label>
    <data>
    <x>1216233600</x>
    <y1>79.605</y1>
    </data>
    <data>
    <x>1216233900</x>
    <y1>78.076</y1>
    </data>
    </series>
    <series>
    <title>Total Bandwidth, in Mbits per
    Second</title>
    <xLabel>startdatetime</xLabel>
    <y1Label>sum(egress_bytes_mbps)</y1Label>
    <y2Label>combined_midgress_bytes_mbps</y2Label>
    <y3Label>ovh_bytes_mbps</y3Label>
    <y4Label>sum(ingress_bytes_mbps)</y4Label>
    <data>
    <x>1216233600</x>
    <y1>36.160352</y1>
    <y2>66.48362700000001</y2>
    <y3>66.48362700000001</y3>
    <y4>96.01235200000002</y4>
    </data>
    <data>
    <x>1216233900</x>
    <y1>34.260794</y1>
    <y2>62.10649799999999</y2>
    <y3>62.10649799999999</y3>
    <y4>88.902323</y4>
    </data>
    <data>
    <x>1216234200</x>
    <y1>35.329617</y1>
    <y2>62.77339099999999</y2>
    <y3>62.77339099999999</y3>
    <y4>89.30751</y4>
    </data>
    </series>
    </reporting>
    The first series element has 4 children
    I am able to get the number of data elements as:
    "resultObj.reporting.series[0].data.length"
    How do I effectively retreive:
    "resultObj.reporting.series[0].childNodes().length"
    Apparently this does'nt work, I also tried Nodes, children().
    Any documentation or help with this would be awesome
    Thanks a ton
    Pranay

  • Need help with accesing variable with xpath.

    Hi All,
    I need help with xpath in "Switch" BPEL construct. Switch is used to compare value assigned to output vairable and follow one path for "Deny" and another for "Approve". The following is data type for output variable.
    <element name="processResponse">
         <complexType>
              <sequence>
                   <element name="result" type="string"/>
              <sequence>
         <complexType>
    </element>
    The following expressions in Switch statement throw lava.lang.Exception. It error is xpath internal error".
    x20:compare('Deny',$outputvariable.payload/client:result)
    x20:compare('Deny',bpws:getVariableData('outputvariable','payload','/client:processResponse/client:result')
    It works with x20:compare('Deny','Deny'). So I assumed it must be accessing the variable.
    Any help greatly appreciated.
    Thanks,
    Satish

    Cany you try the following
    x20:compare('Deny',string($outputvariable.payload/client:result))
    x20:compare('Deny',string(bpws:getVariableData('outputvariable','payload','/client:processResponse/client:result'))
    Regards
    Albin I
    http://www.albinsblog.com/

  • Please help with Load Variables / ASP

    Hello,
    I am using Load Variables to retreive a variable from an ASP
    page, (which uses a response.write) to output the variable
    getfile.onRelease = function()
    myData = new LoadVars();
    myData.onLoad = function(success){
    if(success) {
    getfile_txt.text = this.strString;
    } else {
    getfile_txt.text = "error";
    myData.load("sendFile.asp");
    stop();
    the problem is that the output says "undefined", but when I
    access the .asp page through my web browser I get the expected
    result of the variable which is "Test1.Doc"
    if any1 can help with this, i would be massivley thankful,
    thanks.

    p.s strString is the variable that I am trying to pass from
    the ASP page.

  • Help With Multiple Class Objects With Methods

    I am dealing with multiple classes. I am wondering why I am getting an error on this line it's by the bottom
              obj1.array() = newArray[i];
    It gives the array out of bounds. On another note I believe I can change obj1 to just like incomingArray if I wanted correct since it's just a reference because I should be able to do this method sort on any array.
    method : selSort
    input - none
    output - void
    This is where we sort the arary
    Pseudocode Code:
    1 Initialize variable oldlocation to hold spot of smallest number in original array
    2 Initialize variable smallnumber to store smallest number in original array
    3 Initialize new integer array
    4 Set new array length to length of original array
    5 Initialize variable length to store lengh of new array
    6 For i = 0 and continue till i < new array length
    6.1 Find smallest number in original array
    6.2 Put the smallest number in new array
    6.3 Remove smallest number from original array
    7 Copy contents of new array that is sorted to original array
    Basic concept is to repetitively find the smallest
    (or largest) item in the original array. Once smallest
    is found, move it to the next spot in a new array and
    remove it from the old array.
    public void selSort ()
         int oldlocation = 0;
         int smallnumber = 0;
         int [] newArray = obj1.array();
         newArray = new int [obj1.length()];
         int length = newArray.length;
         for (int i = 0; i < newArray.length; i++)
    //          System.out.println("Test 1");
              newArray[i] = obj1.sortSmall();
    //          System.out.println("Test 2");
              smallnumber = obj1.sortSmall();
    //          System.out.println("This is the smallest number " + smallnumber);
              oldlocation = obj1.location(smallnumber);
    //          System.out.println("This is the old location " + oldlocation);
    //          System.out.println("Test 3");
              obj1.removeLocation(oldlocation);
    //          System.out.println("Test 4");
         System.out.println();
         System.out.println("The sorted array looks like");
         for (int k = 0; k < newArray.length; k++)
              System.out.print(newArray[k] + " ");
         System.out.println();
         System.out.println();
         obj1.resize(newArray.length);
         for (int i = 0; i < newArray.length; i++)
              obj1.array()[i] = newArray[i];
         return;

    method : selSort
    input - none
    output - void
    This is where we sort the arary
    Pseudocode Code:
    1 Initialize variable oldlocation to hold spot of smallest number in original array
    2 Initialize variable smallnumber to store smallest number in original array
    3 Initialize new integer array
    4 Set new array length to length of original array
    5 Initialize variable length to store lengh of new array
    6 For i = 0 and continue till i < new array length
    6.1 Find smallest number in original array
    6.2 Put the smallest number in new array
    6.3 Remove smallest number from original array
    7 Copy contents of new array that is sorted to original array
    Basic concept is to repetitively find the smallest
    (or largest) item in the original array. Once smallest
    is found, move it to the next spot in a new array and
    remove it from the old array.
    public void selSort ()
         int oldlocation = 0;
         int smallnumber = 0;
         int [] newArray = obj1.array();
         newArray = new int [obj1.length()];
         int length = newArray.length;
         for (int i = 0; i < newArray.length; i++)
    //          System.out.println("Test 1");
              newArray[i] = obj1.sortSmall();
    //          System.out.println("Test 2");
              smallnumber = obj1.sortSmall();
    //          System.out.println("This is the smallest number " + smallnumber);
              oldlocation = obj1.location(smallnumber);
    //          System.out.println("This is the old location " + oldlocation);
    //          System.out.println("Test 3");
              obj1.removeLocation(oldlocation);
    //          System.out.println("Test 4");
         System.out.println();
         System.out.println("The sorted array looks like");
         for (int k = 0; k < newArray.length; k++)
              System.out.print(newArray[k] + " ");
         System.out.println();
         System.out.println();
         obj1.resize(newArray.length);
         for (int i = 0; i < newArray.length; i++)
              obj1.array() = newArray[i];
         return;

  • Help with multiple contacts with multiple phone numbers

    I'm fairly new to the iPhone so thanks in advance for any help with this issue.
    I have contact list with records for a lot of people (300+), each with several phone numbers each, home, mobile & work, etc, .I can't seem to find a way to have the iPhone announce the name & number or name & type (home,mobile,work) of the caller from the contact list, my old cell phone could do that easily.
    At the moment what I've been doing as a work around for a few (important) people is to create a custom ringtone for that caller & that phone number.  Since it also seems there's no way to attach a different ringtones to each number in a single contact record I've had to create multiple contact records for each person, each with a different name/number combination such as "John Doe Work", "John Doe Home" or John Doe Mobile" then assign to it the custom ringtone I created for that name/number. 
    I need to this so that if I receive a call while I'm driving (or whatever) that I can't answer right then for some reason (often happens),  the ringtone I created for that name & number helpfully lets me know  who & where their calling from.  It's very important to know where someone is calling from, if someone's calling from home then I know I've got some time,  but if their calling from work then I need to get back to them quickly.
    This is a real pain!, having to make multiple contacts & ringtones for a every person with multiple numbers is a extraordinary waste of time.  My old cell phone could do this with no problem but there doesn't seem to be any way to do this with my new iphone.  Am I missing something here?  I am new to the iPhone so if there’s a solution to this that I’ve missed I'd very much appreciate the assistance.
    Thanks in advance.
    Al

    https://discussions.apple.com/message/18271382#18271382

  • Need help with maintaining variable choices in new session

    I have a flash app. set up with several variables. Is there a
    simple action script that will allow the user to maintain their
    choices after closing the .swf and re-launching it?
    Thanks in advance for your help.

    how are you checking if those components have been checked or
    ticked. actually, i probably don't want to know that.
    you really should be using a listener to detect when your
    components have changed and then you can use the changed method to
    set your variables and update your sharedobject.

  • Find and replace help needed, multiple variables

    Hi everyone,
    Im trying to find all urls in my code that start in a particular way but have a number variable at the end, see examples below
    <a href="/example/examplefolder/enquiry.asp?pid=123">
    <a href="/example/examplefolder/enquiry.asp?pid=485">
    <a href="/example/examplefolder/enquiry.asp?pid=284">
    and replace them with one url, see example below
    <a href="/example/examplefolder/default.asp">
    How can I use Dreamweaver find and replace to achieve this across my whole website?
    So far I only know how to find one thing and replace with another, rather than finding variables and replacing them with one thing.
    Thanks for your help with this!

    In the Find field of the Find and Replace dialog box, enter this:
    (href\s*=\s*\"\/example\/examplefolder\/enquiry\.asp)\?pid=\d+(\")
    In the Replace field, enter this:
    $1$2
    Select the "Use regular expression" checkbox.
    Explanation:
    The two sets of parentheses are capturing groups, which capture the actual values as $1 and $2.
    The \s* matches zero or more spaces.
    \" matches a double quote.
    \/ matches a forward slash.
    \? matches a question mark
    \d+ matches one or more numbers.
    I have written a two-part tutorial on using regular expressions, which can be found here: http://www.adobe.com/devnet/dreamweaver/articles/regular_expressions_pt1.html.
    Message was edited by: David_Powers (adding explanation of double quote).

  • A little bit of help with Bind variables please

    Hi,
    I am having a bit of trouble with bind variables I have been looking at the Dev guide and the forum to try and achieve this and it is still not happening for me, could anybody please help or point me in the right direction:
    I have created a simple PersonVO with the basic query:
    Select distinct full_name from xxml_people where person_id = :1
    In the PersonVOImpl.java I have added the method:
    public void initQuery(String personId)
    Number person = null;
    try
    person = new Number(personId);
    catch
    (Exception e){}
    setWhereClauseParam(1,person);
    executeQuery();
    Then in the PersonAM I have added the method:
    public void initPersonQuery(String personId)
    getPersonVO1().initQuery(personId);
    I then call this method in my processRequest section of my page controller:
    PersonAMImpl am = (PersonAMImpl) pageContext.getRootApplicationModule();
    String personId = "581";
    am.initPersonQuery(personId);
    When I try and run this I get the error:
    oracle.apps.fnd.framework.OAException: oracle.jbo.SQLStmtException: JBO-27122: SQL error during statement preparation. Statement: SELECT distinct full_name from xxml_absence_calendar where person_id = :1
    java.sql.SQLException: ORA-01006: bind variable does not exist
    Am I binding the variables correctly? Or am I making some stupid mistake?
    I am ultimately looking to create a messageChoice where the logged in user will see a list of all organisations underneath him and the one level above. I plan to do this by passing the User’s Organisation name into a VO query using the organisation as a Bind Variable. I think once I have worked out how to bind variables this should be straight forward.
    Many Thanks

    Even though the parameter binding values may be same, you should never use the positional param more than once. So always go for the format
    select distinct full_name from xxml_people where supervisor_id = :1
    UNION
    select distinct full_name from xxml_people where person_id = :2
    --Shiv                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Help With Multiple Schemas In Multiple Environments

    Dear Oracle Forum:
    We have a bit of controversy around the office and I was hoping we could get some expert input to get us on the right track.
    For the purposes of this discussion, we have two machines, development and production. Currently, on each machine, we have one database with multiple schemas, say, one for sales data and another for inventory. The sales data has maybe 200 tables and the inventory has another 50. About 12 times a year, once a month, we have a release and move code from dev to prod. The database is accessed by several hundred Pro*C and Pro*Cobol programs for online transaction processing.
    The problem comes up when we need to have multiple development environments. If I need to work on something for May that requires the customer address field to be 50 characters and somebody else is working on something for July that requires the customer address field to be 100 characters, we can’t both function in the same schema. We have a method of configuring running programs to attach to a given schema/database. Currently, everything connects to the same place. We were told that we should not have the programs running as the owners of the schemas for some reason so we set up additional users. The SALES schema is accessed with the connect string: SALES_USER/[email protected] (I don’t know where we got dot world from but that is not the current discussion.)
    One of the guys said that we should have 12 copies of the database running, which is kind of painful to think about in my opinion. Oracle is not a lightweight product and there are any number of ancillary processes that would have to be duplicated 12 times.
    My recommendation is that we have 12 schemas each for sales and inventory with 12 users each to access them. We would have something like JAN_SALES_USER, FEB_SALES_USER, etc. Each user would have synonyms set up for each of the tables it is interested in. When my program connects as MAY_SALES_USER, I could select from the customer table and I would get my 50 character address field. When the other user connects as JUL_SALES_USER, he would get his 100 character address field. Both of us would not know anything different.
    Another idea that came up is to have a logon trigger that would set the current schema for that user to the appropriate base schema. When JUL_SALES_USER logs in, the current schema would be set to JUL_SALES, etc. This would simplify things by allowing us to avoid having something like 2400 synonyms to maintain (which could be automated without too much difficulty) but it would complicate things by requiring a trigger.
    There are probably other ways to go about this we have not considered as yet. Any input you can give will be appreciated.
    Regards,
    /Bob Bryan

    Hans Forbrich wrote:
    I'd rather see you with 12 schemas than with 12 databases. Unless you have lots of CPUs to spare ... and lots of cash to pay for those extra CPU licenses.
    Then again, I'd take it one step further and ask to investigate the base design. There should be little reason to change the schema based on time. Indeed, from what little I know of your app, I'd have to ask whether adding a 'date' column and appropriate views or properly coded SQL statements might simplify things. Interesting. If we were to have one big Customer table with views for each month, how would we handle the case where the May people have to see 50 character address and July have to see a 100 character address field. I guess we could have MAY_ADDRESS VARCHAR2(50) and JULY_ADDRESS VARCHAR2(100) and take care to make sure that people connecting as May can only see the May columns, etc. This is simpler than multiple schemas?
    I may have overly simplified things in my effort to get something down that would not require too much explanation. The big thing is that multiple people are doing development and they have to be independent of each other. If we were to drop a column for July, the May people will have trouble compiling if we don’t keep things separate. It is not a case of making the data available. The data in development is something we cook up to allow us to test. The other part is the code we compile now will be released to production one of these times. In production, there is only a need for one database.
    We are moving from another database product where multiple databases are effectively different sets of files. We have lots of disk space so multiple databases were no problem. Oracle is such a powerful product; I can’t believe there is not some way to set up something similar.

  • Help with multiple case statements

    Hello,
    I am new to BO.  I am on XI 3.0.  SQL 2005.  In Designer, I am trying to create a measure in a financial universe that would end up being multiple case statements within one select.  This is what I tried to do, but it doesn't work with the two case statements.  Can I use an ELSE leading into the second CASE WHEN somehow?  How can I accomplish this?  Sorry for my ignorance!
    CASE WHEN dbo.ClientBudgetYear.DateStage1Approved > 01/01/1900 AND dbo.ClientBudgetMonth.Month = 12 THEN dbo.ClientBudgetMonth.Stage1Sales END
    CASE WHEN  dbo.ClientBudgetYear.DateStage1Approved > 01/01/1900 AND dbo.ClientBudgetMonth.Month = 11 THEN dbo.ClientBudgetMonth.Stage1Sales END
    Any Suggestions?
    Thanks,
    Holly

    Holly,
    I don't know enough about your data or requirement to provide a solution, however, the construct that you post will not work because it causes you to build an object with multiple case statements when only one case statement per object is permitted.  From what I see in your code I would be inclined to combine the two statements into one as such:
    CASE WHEN dbo.ClientBudgetYear.DateStage1Approved > 01/01/1900 AND dbo.ClientBudgetMonth.Month in (11,12) THEN dbo.ClientBudgetMonth.Stage1Sales else null END
    Thanks,
    John

Maybe you are looking for