Help with P6N Diamond X-Fi drivers
Ok, even though we have a fair share of threads with problems with this on board sound, im sure some of you must have it working correct.
So if you do, please tell me which driver you are using for the X-Fi.
Im running Windows Vista 64bit UK and if I use the driver from the CD I get the problem with the microphone not working. (It says its connected when its not, and vice versa.)
When I use the driver downloaded from the support page I can use the microphone, but none of the fancy properties of the sound card.
I tried MSI's support and was told:
Dear Customer,
Please install driver patch for the sound card from ftp. (ftp.msi.com.tw)
Driver\Driver Patch 2.zip.
Thank you!
So, I downloaded the file, unpacked it, and have tried different ways of "installing" it. (Clicking on the exe does not seem to work, and copying the files into the filesystem where the installed driver is located did not help either.) Since it had no effect I'm completely clueless to what the idea is behind this patch. If anyone can figure it out I would very much like to hear about it.
Yes, none of the suggestions work.
The first suggestion: Don't use the front panel.
I have already disconnected the front panel completely.
The second suggestion refers to a "Headphone Detection tab" that, although mentioned in the Audio Console help file, does not show up on my computer.
I find it rather amusing that a top-of-the-line board, specially focusing on the on-board audio, does not have a working Vista audio driver.
The board is now almost one year old, and 10 months has passed since the Vista launch.
Whats even more amusing is that Creative, who put their name on the on-board audio, does not want to have anything to do with this on-board sound either.
Reading about all the other problems with the board and experiencing plenty of these problems myself.. perhaps its time to return it, and add myself to the list of people who don't care about this board....
Similar Messages
-
Windows lockup problems with P6N Diamond
MSI P6N Diamond nForce 680i SLI Socket 775 motherboard
Seagate ST3250410AS 250 GB SATA hard drive
LITEON LH-20A1L-06 20X SATA DVD Burner
EVGA e-GeForce 8800 GTS Superclocked PCI Express video card
OCZ OCZ2TA1000VX22GK PC2-8000 Titanium Alpha VX2 Dual Channel Memory (2 x 1GB)
Windows XP Pro SP2
I have been having lots of problems with Windows XP just locking up on me. It has happened 3 times now, and I am tiring of re-building my PC from scratch. Every time, it works for a while, and then, just locks up one day.
At this point, I've removed my partition, rebuilt it, reformatted and re-installed windows. I'm currently running the AMI v1.3 bios. I've loaded the latest nVidia drivers (9.53 driver package). I've loaded the latest graphic drivers from EVGA (169.02_XP32).
I've read lots of posts in various forums about issues with SATA settings on nVidia systems, but I can't seem to find a post that is clear about the best settings. They mentioned disabling command queuing, using/not using SiL drivers, etc. Can anyone offer any insight that might help me straighten out my system? I am close to tossing it out a window.Not quite sure how to answer, but here is the dump from cpuz:
Chipset
Northbridge NVIDIA nForce 680i SLI SPP rev. A2
Southbridge NVIDIA nForce 680i SLI MCP rev. A2
Graphic Interface PCI-Express
PCI-E Link Width x16
PCI-E Max Link Width x16
Memory Type DDR2
Memory Size 2048 MBytes
Channels Dual
Memory Frequency 400.1 MHz (2:3)
CAS# 4.0
RAS# to CAS# 4
RAS# Precharge 4
Cycle Time (tRAS) 15
Bank Cycle Time (tRC) 22
Command Rate 2T
Memory SPD
DIMM #1
General
Memory type DDR2
Module format Regular UDIMM
Manufacturer (ID) OCZ (7F7F7F7FB0000000)
Size 1024 MBytes
Max bandwidth PC2-6400 (400 MHz)
Part number OCZ2TA1000VX21G
Attributes
Number of banks 2
Data width 64 bits
Correction None
Nominal Voltage 1.80 Volts
EPP no
XMP no
Timings table
Frequency (MHz) 270 333 400
CAS# 3.0 4.0 5.0
RAS# to CAS# delay 4 5 5
RAS# Precharge 4 5 5
TRAS 10 13 15
TRC 15 18 22
DIMM #2
General
Memory type DDR2
Module format Regular UDIMM
Manufacturer (ID) OCZ (7F7F7F7FB0000000)
Size 1024 MBytes
Max bandwidth PC2-6400 (400 MHz)
Part number OCZ2TA1000VX21G
Attributes
Number of banks 2
Data width 64 bits
Correction None
Nominal Voltage 1.80 Volts
EPP no
XMP no
Timings table
Frequency (MHz) 270 333 400
CAS# 3.0 4.0 5.0
RAS# to CAS# delay 4 5 5
RAS# Precharge 4 5 5
TRAS 10 13 15
TRC 15 18 22 -
Sli-bridge incl with P6N Diamond??
Ive just orderd a new mobo, P6N Diamond. And was wondering if the SLI-bridge is incl in the box? I cant find anything about that. Mayby a stupid question here for all tech-heads.....sry for that
Quote from: flobelix on 16-October-07, 21:10:52
You don't need to. As it is a board with a sli chipset MSI has to add a bridge. The reminder doesn't pertain to the bridge. Any retail MSI board with sli chipset comes with a bridge, no matter the area where it is sold.
Because nVidia don't ship SLI bridges with their cards. -
4pin or 8pin connector with p6n diamond and E6750 core 2 duo
hi guys my system boots up fine and everything is working but i am using one 4 pin connector from my psu connecting it to my motherboard
the psu also has another 4 pin connector , shall i connect this to the second blocked connector on the motherboard or is one 4 pin enough?
thanks, please see the image.
e6750
msi p6n diamond
ocz gameXstream 700W
8800gtgreat! thanks for your quick reply
i would just like to add that the p6n has been the best build ever, straight from the box to the desktop in 30 minutes!!! thank you msi. -
Help with HP G60 458DX Sound Drivers and Windows 8.1
I have recently upgraded my laptop to Windows 8.1 and my sound is non-existent. As stated in the subject line, I am running an HP G60 458DX, Windows 8.1, 64 bit and the sound device is a Conexant High Definiaiton SmartAudio 221, and a High Definition Audio Device. The driver information on the Conexant High Definition SmartAudio 221 is dated 10/2/2008, version 4.58.1.0
Please help.Hello Tom-Tax,
I understand you are looking for an audio driver for Windows 8.1 on your HP G60 458dx Notebook. As it stands there are no drivers indicated by HP for this on their website. If you could post the Hardware ID of the Audio device installed in your system I will attempt to locate appropriate drivers for you. You can locate the Hardware ID by following the directions provided in How to Find Hardware ID.
I look forward to your response. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter -
SLI with P6N Diamond not working.
I have installed 2 8800GT's and can't get them to run at 16x in SLI mode. So far I've installed the two cards in the top 2 slots and the 2 white slots. I've installed the bridge. According to GPU Z, the bus interface is operating PCI-E 16x @ 8x in either place.
Is there something I'm missing? Is there anything in the Bios I need to set?Quote from: badnewcastle on 01-July-08, 00:27:59
Thx was just trying to help and as I stated, I wasnt sure
Next time figure it out on your own, cant have that "funny" stuff now.
If your so "good" why are you asking questions here then?
Go find another hobby instead of p.......g off people.
I am only trying to help.
Believe me, I know a lot but not everything , even I have my shortcomings, after 15 yrs off pc usage and problem solving, but thats no reason to be rude!!!!!
Off topic:
Read me sig, before you get "funny" again, on this moment my fuse is very short and believe me, going funny on me your not going to win!!!!!
Sorry mods, cant take this c... right now and ive always been a good help here but this i will not tolerate!!!!
So my apologies to the mods and to ..... with that ....... newbie !!!!!
Fill in the blanks yourself badnewcastle !!!!! -
Help cant overclock e6600 on p6n diamond
well I'm new to overclocking and have had luck overclocking my evga 8800gts 320s but want to boost CPU performance to raise 3d mark score.running vista 64 bit and with one card (other card is being rma to evga loud fan)scored almost 10,500 with CPU at 2.691 and this seems to be the limit im stuck at it just locks any higher set any higher
set memory in range easily met disabled speed step,spread spectrum,cie disabled
tried raising some voltages CPU,fsb,northbridge nothing too crazy but will not budge over 2.7 i would like to get to 3.0 - 3.2 range CPU temps run cool even through 3d mark run at 2.691 using zalman 9500 CPU cooler and antec 900 case any help would be great well here is my system
antec 900
Intel e6600
msi p6n diamond
2 evga 8800 gts 320 sc overclocked
crucial ballistix 6400 4-4-4-12 2.1 v
silverstone strider 750
zalman 9500
1.0 bios
vista 64 bit home premiumHello. Im new to overclocking also. Ive just got my setup like 2 weeks ago and want to do a little ocing myself on this board. What did you use to Oc? Bios? Ntune? I tired Ntune, but when I try to raise something and apply it, it just locks up the comp and i have to restart. Ive checked the Bios and it was a little confusing in there. Here is my setup
Motherboard: MSI P6N Diamond
CPU: Intel Core 2 Duo E6550 2.33GHz FSB 1333Mhz
CPU Heatsink: Arctic Cooling Pro 7 w/ Arctic Silver 5 Paste
Memory: OCZ 2x2GB DDR2 800 Timing:5-4-4-15
HDD: Western Digital 150GB Raptor
Video card: Pny Xlr8 8800GT 512MB
Power Supply: Thermaltake PurePower 700W Modular
Case: Antec Nine Hundred
Cooling: 2x120mm front fan, 1x200mm top fan, 1x120mm rear fan, 1x120mm side fan.
Idle Temp: 22C/72F
Thank You in advanced for any help. I don't want to do that big of ocing, just to get the CPU to 2.5Ghz or something. -
P6N Diamond reboots with E6850 CPU (Kernel-Power)
I hope I give enough information to possibly help with my issue. I recently changed my CPU from a Pentium D 3.4GH to the Core™2 Duo CPU E6850 Conroe 3.00GHz. I can't run for more than two hours before I get a sudden reboot. I checked the event viewer and there is a critical event: Kernel-Power. I'm not trying to overclock (although I'd love to learn how too). I've listed my specs below and thought I'd mention that I don't have a heatsink and fan on the CPU. I'm using the Corsair liquid cooler. I have fans blowing on the heatsinks to keep the heatpipe cool. Checking it with a Fluke IR Thermometer I get 45c on the 680i heatsink and 50c on the 590i heatsink. This temp is comparable to when I had the Intel heatsink and fan on the cpu. I use the Cooler master CM Sniper for my case and there seems to be adequate air flow. I just did a reinstall (cleaned the hard drive) using the Pentium D and have been adding and updating one driver at a time to see when the problem would start. As soon as I added the E6850 CPU the reboots started. I changed back and the reboots stopped. The Any help and/or ideas would be appreciated.
CPU: Intel ® Core™2 Duo CPU E6850 Conroe 3.00GHz
CPU Cooling: Corsair Hydro Series H50 Liquid Cooling system (MSI Dual Core Center utility shown CPU temp at 24c at idle and gets up to 28/30 under higher loads)
Motherboard: MSI P6N Diamond LGA 775 NVIDIA nForce 680i SLI ATX Intel Motherboard
Ram: OCZ 4GB (2 x 2GB) PC26400
Power Supply: Corsair TX650W
Hard Drives: Western Digital 150GB x2 (Raid 0)
Video Card: Nvidia 9600 Gt 1GB (x2 SLI) (MSI cards)
Sound Card: I have the onboard sound disabled at this time
OS: Windows 7 64-bitHello and welcome,
What bios do you have?
If its 1.0 its possibly not fully supporting your cpu and you probably need to flash your bios.
If you need to flash, read here on how to safely:
https://forum-en.msi.com/index.php?topic=113295.0
And go here for biosfiles:
http://global.msi.eu/index.php?func=downloaddetail&type=bios&maincat_no=1&prod_no=1168
Take 1.3 it incorporates all previous fixes. -
I've installed windows 7 with the help of bootcamp on my macbook pro 2011.
Please help me how to install mac drivers for windows7 64 bit???You either download drivers from within Boot Camp Assistant and save to USB FAT disk, or you insert and use 10.6.x OS X DVD when in Windows and install and run the SETUP from there.
General Help:
Boot Camp 4.0, OS X Lion: Frequently asked question
http://support.apple.com/kb/HT4818
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
create a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
Installation Guide Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
- support articles and tips, how to.
http://www.apple.com/support/bootcamp/
Macs that work with 64-bit editions of Microsoft Windows Vista and Windows 7
http://support.apple.com/kb/HT1846
Step 4: Install the Boot Camp Drivers for Windows
After installing Windows, install Mac-specific drivers and other software for Windows using your Mac OS X installation disc. The Mac OS X disc installs drivers to support Mac components, including AirPort,built-in iSight camera, the Apple Remote, the trackpad on a portable Mac, and thefunction keys on an Apple keyboard.
The Mac OS X disc also installs the Boot Camp control panel for Windows and theApple Boot Camp system tray item.
To install the Boot Camp drivers:
1 Eject the Windows installation disc.
2 Insert the Mac OS X disc. If the installer doesn’t start automatically, browse the disc using Windows Explorerand double-click the setup.exe file in the Boot Camp directory.
3 Follow the onscreen instructions.
If a message appears that says the software you’re installing has not passed Windows Logo testing, click Continue Anyway.
Windows that appear only briefly during the installation don’t require your input.
If nothing appears to be happening, there may be a hidden window that you mustrespond to. Check the taskbar and look behind open windows.
Important: Do not click the Cancel button in any of the installer dialogs.
4 After your computer restarts, follow the instructions in the Found New Hardware Wizard to update your software drivers (Windows XP only).
5 Follow the instructions for any other wizards that appear.
6 Check for updated Boot Camp drivers by using Apple Software Update or going to www.apple.com/support/bootcamp.
If You Have Problems Installing the Device Drivers
If it appears that the Boot Camp drivers weren’t successfully installed, try repairing them.
To repair Boot Camp drivers:
1 Start up your computer in Windows.
2 Insert your Mac OS X installation disc.
3 If the installer doesn’t start automatically, browse the disc using Windows Explorerand double-click the setup.exe file in the Boot Camp directory.
4 Click Repair and follow the onscreen instructions.
If a message appears that says the software you’re installing has not passed Windows Logo testing, click Continue Anyway.
If you need to reinstall specific drivers, you can install one driver at a time. For example,if your built-in iSight camera isn’t working, you can reinstall just the iSight driver.
Individual drivers are in the Drivers folder on the Mac OS X installation disc. -
Help with Epson and HP All-In-One Drivers
I've been looking through the forums for a day and not really finding what I'm looking for, so I decided to post...
Running an AE-N for a Macbook, a Powermac, and a Powerbook.
I've got two printers...an Epson R200 photo printer and an HP PSC 1410 All-In-One printer/scanner. I'm not worried about the scanning so much as the actual printing, both wirelessly and wired. I have no problem adding the printers...they pop up effortlessly in the printer setup through bonjour. But once I actually try to print to them, they endlessly search for the printer ("Looking for printer Epson R200"). Didn't think this would be a problem because they were found so easily by the AE.
I've read all the iFelix stuff posted and granted, I haven't tried the GIMP method just yet, but the R200 at least should be printing right out of the box, correct?
The printers are plugged into a USB hub and I've got an external HD plugged in as well...no problems with it. Any help would be appreciated...
JDHJohn Blanchard1 wrote:
Yes, but it's difficult to know what state the drivers are in after moving things over from Time Machine. Try deleting the /Library/Printers/hp folder and using Software Update to reinstall the current drivers. If that doesn't work, you can download the drivers here:
http://support.apple.com/kb/DL907
This is working. I had the same problem with Yosemite and found Hp drivers were not working properly.
No need to delete the HP folder in library- printers because there wasn't any directory. -
I recently updated my computer to 10.6 and now I can't get my printer MX340 (canon ) to work. I have installed the new drivers both from Canon's website and from an earlier post directly from apples website. I would surely appreciate some help with this.
Try what Terence Devlin posted in this topic:
Terence Devlin
Apr 14, 2015 11:21 AM
Re: Is Iphoto gone ? i want it back!
in response to Johannes666
Recommended
Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
Install the App from the App Store.
Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always. -
MSI P6N Diamond with E8400 EIST
Running the p6n diamond with the E8400 and I can not seem to get the EIST to work. I try to enable it in the bios, but once I exit it goes back to disabled. Even with the F4 in the bios, I do not see any options for the C1 feature. Currently I have my CPU OCed to 3.6GHz, but that is recent and I could never get the EIST to work even at stock speeds.
Bios version 1.3 btw
System
Vista 64 bit Ultimate
P6N Diamond
E8400
2x2GB OCZ SLI ram 6400
500GB WB SATAII HDD
XFX 9800GTXQuote
but just not EIST staying enabled.
That means, if you re-enter the BIOS Setup after you have saved & exited it, your changes are lost? All of them or just "Intel EIST" in the Cell Menu?
Quote
because the OCing voltage/FSB is changing
Can you be more specific about what values are actually changing and under which condiditions? Try to give a more detailed explanation of what is actually going on there.
Quote
I could not find C1E support anywhere before even with F4 in the bios, is it suppose to be there?
It should be under "CPU Features". Press F4 multiple times while you are in that BIOS Section.
Quote
People have said there is suppose to be an "EIST" option in there, but I have never seen it.
There is no "EIST" option in there. -
P6N Diamond + Q6600 Overclocking Help
Hey guys,
After tweaking my setting for 7 hour, I got my computer stable @ 3.0Ghz using the following settings.
MSI P6N Diamond
Thermaltake Big Typhoon (Idle Temps 25-30C / Under Load Temps 35-50C)
FSB @ 1333
Memory @ 800
CPU Ratio @ 9x
PCI-E @ 100
CPU Voltage .0250V
Memory @ 2.2V
NB Voltage @ 1.325V
SB Voltage @ 1.50V
FSV VTT Voltage @ 12%
C1E Disabled
Now, I ran Prime95 on it from 2 AM last night till 2PM today, and had no problems. Very stable.
My only problem now is that I get random restarts on my system sometimes, like when I'm loading stuff, and so it restarts randomly, and then on boot, my Wireless Card (D-Link DWA-552 Extreme Wireless N) wont work anymore. Windows will see it, and says it works, but it wont detect any wireless networks. My Sound Card works fine, it is also in a PCI slot like the Wireless Card, so I'm wondering what else I need to tweak to make my peripherals working.
ThanksAlright, when I try and run IntelBurntest, I can't even get the thing to run. Here is the mark from the Prompt.
Code: [Select]
IntelBurnTest v1.6 - Utilizes Intel(R) Linpack technology
by AgentGOD
Thanks to Cronos from XS for the memory size equation
Description: Linpack by Intel(R) is an extremely stressful program that will
put even the most powerful X86/X64 CPU in the world at its knees. Load temp
under Linpack will be up to 22*C higher than the competing software Prime95.
This program will make usage of Linpack easier and more practical.
Note: Testing under 64-bit Windows with an Intel(R) Core 2(tm) processor
will yield the most accurate test stability results. If you notice that
data under the "Residual(norm)" column is not consistent throughout the
testing session, your CPU and/or System Memory is unstable under stress.
Operating Systems supported:
32-bit Windows (X86)
64-bit Windows (X64) [not Itanium]
Currently running OS: 32-bit
Physical memory available: 2445 MB
Turn on error detection (Y/N)? N
Stress levels available:
1 - Maximum stress
2 - Half stress (uses 1/2 of available memory)
3 - Low stress (uses 1/4 of available memory)
4 - Customize stress level
Please select desired stress level> 1
Using maximum available memory to stress test (2445 MB).
Enter the number of times to run the test (5 or more recommended)> 10
Executing Intel(R) Linpack 32-bit mode...
Intel(R) LINPACK data
Current date/time: Thu Sep 11 18:07:58 2008
CPU frequency: 3.000 GHz
Number of CPUs: 4
Number of threads: 4
Parameters are set to:
Number of tests : 1
Number of equations to solve (problem size) : 17344
Leading dimension of array : 17344
Number of trials to run : 10
Data alignment value (in Kbytes) : 4
No runs is allowed for LinData\x86\linpack32.exe: not enough memory
Testing finished in 0.140 seconds.
Please check the "Residual(norm)" values and confirm that they are
all equal. If not, your CPU/RAM has failed Linpack testing.
Please donate if you like this program!
(http://www.ultimate-filez.com/?page=donate)
Execution stopped. Press enter to exit.
Say not enough memory, so I dont know what's going on here. =/ -
P6n Diamond with q6600 question
I currently own an Asus Striker extreme and it sucks at overclocking Quad cores to put it nicely. I was looking at the P6n Diamond board and was wondering what kind of Overclocking to expect on it for a quad core.
Thanks for the reply. Appears it is plagued with the same issue as my current board after reading that. The only ones i've see that fixed the problem are EVGA and XFX but thier board layout doesn't work for me.
-
P6N Diamond+Quad core overclocking - Help if you have this board.
Am having some issues trying to get even the simplest overclock on this board plus some wierd stuff it is doing with ram settings. Can't get linked setting to work.
I've read all of the 680i tutorials. Nvidia, XS, HardOCP..............I've read Toms Hardware pre-release review. Basically anything I could find..............
Chip is running cool and rock stable at stock settings with either bios.ok lads - here we go...
it's been a very interesting and revealing morning for me - spent the last 5 hours tweaking the bios, then testing, then tweaking, then testing. these are the results:
note 1: unless otherwise stated, all settings are 'optimised defaults' with 'CE1' disabled (go into 'advanced BIOS features/cpu feature' and press F4 if you can't find it) and 'spread spectrum' disabled.
note 2: unless otherwise stated, 'system clock mode' is set to manual and the memory is set to 800 and timings are on auto.
note 3: default voltages are used unless stated
note 4: each prime95 test is carried out for 5 minutes only
note 5: i'm using a thermaltake kandalf vd4000 case with built-in liquid cooling system. my water-cooled cpu temp in the bios is 19oC (can't seem to get the degree sign using the tip at the top of this page)
note 6: cpu is q6600. memory is 2x1gb xms2 dominator pc2-8500. vga is gainward 8800gtx. psu is hiper 5th gen type-r 770w. bios version is 1.2.
note 7: core temp 0.95 was used for establishing cpu temperature. (apparently, this gives default readings that are 15oC higher than the actual relevant cpu temperature).
test 1 (stock cpu setting):
fsb set to 1066
=2.4ghz
error-free prime95 for 5 minutes: YES
max load temp: 46
test 2:
fsb set to 1166
=2.62ghz
error-free prime95 for 5 minutes: YES
max load temp: 47
test 3:
fsb set to 1206
=2.71ghz
error-free for 5 minutes: NO (4 cores failed within 30 seconds)
max load temp: 47
decided to try pumping some more volts into the cpu to see if i could get it stable in prime95
test 4:
fsb set to 1206
=2.71ghz
cpu voltage increased by 0.0125
error-free for 5 minutes: NO (4 cores failed within 30 seconds)
max load temp: 47
test 5:
as above, but cpu voltage increased by 0.0250
error-free for 5 minutes: NO (4 cores failed within 30 seconds)
max load temp: 47
test 6:
as above, but cpu voltage increased by 0.0375
error-free for 5 minutes: NO (4 cores failed within 30 seconds)
max load temp: 48
test 7:
as above, but cpu voltage increased by 0.0500
error-free for 5 minutes: NO (4 cores failed within 30 seconds)
max load temp: 48
test 8:
as above, but cpu voltage increased by 0.0625
error-free for 5 minutes: NO (4 cores failed within 30 seconds)
max load temp: 49
test 9:
as above, but cpu voltage increased by 0.0750
error-free for 5 minutes: NO (4 cores failed within 30 seconds)
max load temp: 49
test 10:
as above, but cpu voltage increased by 0.0875
error-free for 5 minutes: NO (4 cores failed within 30 seconds)
max load temp: 49
test 11:
as above, but cpu voltage increased by 0.1000
error-free for 5 minutes: NO (4 cores failed within 30 seconds)
max load temp: 50
this took me to the recommended limit for voltage for the q6600, which is 1.375v.
it seems i can safely say that changing the cpu voltage makes absolutely no difference at all.
still keeping the fsb at 1206, the next thing i tried was increasing the NB voltage to 1.275v and keeping the cpu voltage at +0.1000
these settings still couldn't get prime95 to run error-free for more than a few seconds.
keeping the fsb at 1206, cpu voltage at +0.1000 and the NB voltage at 1.275, the next thing for me to try was increasing the 'fsb vtt voltage' by 2%
SUCCESS!!! SUCCESS!! SUCCESS!!
using the above settings, prime95 ran error-free for 5 minutes.
my next problem was trying to work out which of the above voltages settings was the kicker.
keeping the fsb at 1206, i returned the cpu voltage back to default and kept the nb voltage at 1.275 and the 'fsb vtt voltage' at 2%.
SUCCESS!! SUCCESS!! SUCCESS!!
prime95 ran error-free for 5 minutes.
next test was keeping the fsb at 1206, the cpu voltage at default. i also returned the nb voltage to default but left the 'fsb vtt voltage' at 2%.
SUCCESS!! SUCCESS!! SUCCESS!!
prime95 error-free for 5 minutes again!
it seems like the vtt voltage is an important player in getting the system to appear stable.
the next test, i set fsb to 1254 giving 2.82ghz.
keeping all voltages on default except the 'fsb vtt voltage' which i kept at 2%.
prime95 produced errors again, pretty much within the first few seconds...
the next test, i kept fsb at 1254, with default voltages, but the 'fsb vtt voltage' was increased to 4%
SUCCESS!! SUCCESS!! SUCCESS!!
prime95 ran error-free for 5 minutes.
all of a sudden, it seems that regardless of the other settings, the only voltage that matters is the 'fsb vtt voltage'
next test, fsb was set to 1278=2.87ghz.
vtt voltage was 4%
prime95 ran error-free for 5 minutes: YES
cpu temp during load: 49o
next test, fsb was set to 1302=2.92ghz
vtt voltage was 4%
prime95 ran error-free for 5 minutes: YES
cpu temp: 49o
next test, fsb was set to 1326=2.98ghz
vtt voltage was 4%
prime95 ran error-free for 5 minutes: YES
cpu temp: 49o
next test, fsb was set to 1350=3.03ghz
vtt voltage was 4%
CPU FAILED TO POST AND REQUIRED BIOS RESET
next test, fsb was kept at 1350=3.03ghz
vtt voltage increased to 6%
booted fine, but computer froze during prime95
next test, fsb was kept at 1350
vtt voltage was increased to 8%
again, pc froze during prime95
next test, fsb was kept at 1350
vtt voltage was increased to 12%
computer failed to post, requiring reset.
12% was as far as i was comfortable going to, as i'm not sure of the consequences of having this set too high.
it seemed i had reached the limit as far as pushing the fsb goes.
i returned the vtt voltage back to 4% and lowered the fsb to 1334 (i had a hunch that anything over 1333 would give me problems). again, this failed to post.
i set the vtt voltage to 6% - again, it failed to post.
i set the vtt voltage to 8% and again, it failed to post.
i lowered the fsb JUST ONE NOTCH to 1333 and set the vtt voltage to 4%.
this gives an exact cpu speed of 3.000ghz
i'm not sure if this is a coincidence or not, but this setting posted, booted and ran prime95 for 5 minutes without any errors.
it then ran prime95 for over an hour with no errors.
curiously, i set the fsb back up a notch to 1334 and it refused to post, requiring a bios reset.
as i said, it seems 1333 is the absolute limit that i can set this board to in my system configuration. now i don't know about you, but the fact that 1333 works perfectly stable, and 1334 doesn't even post tells me that there is something not quite right with this board.
is it too much of a coincidence that the cpu/mobo hits a wall at EXACTLY 1333/333/3.0ghz?
the next thing i did was set my memory to 1066 and manually set the timings to 5,5,5,15.
coupled with my new rock solid 3.0ghz q6600, this is about as far as it is physically possible for me to push this setup and i'm more than happy with the results.
now i can't wait for the G0 stepping to see what that can do.
maybe a future bios will help with this - who knows...
Maybe you are looking for
-
10g Migration Problem: error shown when trying to call a report from form
Dear Friends, I am working on migrating developer 2000 forms to 10g forms. I am using migration tool for this. Everything is going fine except calling report from a form. Say, in the original form I had the following: RUN_PRODUCT(REPORTS,' C:\test1.r
-
Document Types and No. ranges
Hi Gurus, How many types of document types should we have in a business? If we have 5 banks and client wants number ranges of bank vouchers related to one particular bank should be in continuation, so How it should be done? Please revert asap. Thank
-
Oracle version: 10g and 11g How to monitor SGA size for tuning whether we need to increase the SGA size or not
-
Why is my jsp takes so long to load?
I have just installed Tomcat 4.1.24 and started to play around with JSP for the first time. My questions are 1) why is a simple page like the one shown below take nearly half a minute to display (either for the first time or by pressing the reload bu
-
Settting Matrix field value to contain a Tab
Hi I am using the Matrix control in order to allow for a structured system to be created of header levels and sublevels so that I can have something like: Header 1 Sub Level 1 Sub Level 2 Header 2 Sub Level 1