Help with Performing a Clean Install of Windows 8.1

Hey. I just bought a laptop today and it came with Windows 8.1. However, my issue is that my OS resides in a huge partition (900+ MB). And I don't want this. I want to re-allocate space, and take a portion from my OS's drive in order to create more partitions.
However, to do that, I have to format the drive, which I can't 'cause it contains the OS.
Bottom line: I don't have a CD installer for Windows 8 or Windows 8.1. I am trying to perform a clean install of Windows 8.1 in my laptop. Can I get the installer online? Can I use the product key here in my already activated Windows 8.1 OS? Do I need to
install Windows 8 before installing Windows 8.1?

you may be able to shrink the existing volume(s):
https://technet.microsoft.com/en-us/library/cc731894(v=ws.10).aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Similar Messages

How to perform a clean install of Windows 8 / 8.1

This document describes, how to perform a clean install of Windows 8.
Windows 8 System Requirements
1 GHz or faster processor (with PAE, NX and SSE2 support)
1 GB RAM (32-bit) or 2 GB RAM (64-bit)
16 GB available hard disk space (32-bit) or 20 GB (64-bit)
DirectX 9 graphics device with WDDM 1.0 or higher driver
Additional requirements to use certain features:
To use touch, you need a tablet or a monitor that supports multitouch.
To access the Windows Store and to download and run apps, you need an active Internet connection and a screen resolution of at least 1024 x 768.
To snap apps, you need a screen resolution of at least 1366 x 768
More Info: http://aps2.toshiba-tro.de/kb0/TSB2903E20000R02.htm

I have a new SSD drive and need to either migrate my old HD data, including the Windows 8.1 OS or do a a clean install. I have obtained the ISO, prepared the boot for the flashdrive and downloaded the install software. It asks for the product key. I used the suggested BIOS reader and obtained "a" product key off the BIOS and used that it but (as above) it does not recognize the image.
How id I get my single Windows license onto my new SSD HD? Reload, clean install, ???
How do I get the proper product key or confirm it is correct?
It is a new system with little data that I need to copy. I just want the operating system. I have the driver disc that came with it.

Need help with backup and clean install

Need Assistance with G5
Background
I'm an inexperienced Mac user with a G5, twin 2.0 gig processors and 1.5
gig ram. The OS is v10.3.6. It is the latest OS that will not slow down
internet (Safari/Mail) applications. Anything newer has really slowed internet applications down big time.
Current Problem
I've probably messed up my hard drive by switching back and forth
(archive/install) from newer to present OS. I now have corrupted data and
while my Mac is useable, several things do not work (disk utility, printing
and possibly more). I have a mixture of new and older versions of
these applications/utilities in my OS.
Going Forward
I believe I need to wipe out my hard drive and do a clean install. I also have a Mac mini which I can use (I believe) for backup via firewire.
Backup
Is everything I need to backup in the "User" folder? My spouse and I have
separate accounts and a shared account on the same Mac, with a total of 8.5 gig of data, mostly photo's and music. We want to save that and the usual preferences and favorites/bookmarks/addresses/email, etc. It would be nice if all I had to do was drag the user folder into the target drive.
I'd appreciate any assistance. I have more questions which I'll get to later, but I need to start somewhere.
Thanks all
Mac G5

Backing up your Users folder will save everything in all the accounts on the computer including pictures, music, preferences, etc. as long as they were kept in that folder.
If you have File Vault turned on you should turn it off. The "correct" procedure for transferring to your Mac Mini is as follows:
1. Turn both computers off. Connect them together with a Firewire cable.
2. Boot the G5 into Target Disk Mode.
3. Then boot the Mac Mini normally. The G5's hard drive should be present on the Mini's Desktop.
4. Create a new folder on the Mini and name it something appropriate like G5 User Backup. Drag the Users folder on the G5 into this new folder on the Mini.
After the transfer completes you should verify that everything has been transferred and is there in the folder.
5. Drag the G5's hard drive icon from the Desktop to the Trash or CTRL-click on its icon and select Eject from the contextual menu.
6. Shutdown the G5 and remove the Firewire cable connecting the two computers.
You can now proceed to fix the G5. Because you are planning to erase the hard drive I would like to suggest you do an extended format to prep the hard drive properly for your restoration:
1. Boot from your Panther Installer Disk. After the installer loads select Disk Utility from the Installer menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
You can then quit Disk Utility and return to the installer. Now proceed to reinstall OS X. Be sure you set up your accounts with the exact same usernames and passwords as you used before.
Once you have completed your reinstallation on the G5 you can restore your Users folder from the Mac Mini.
1. Shut down both computers. Connect them with a Firewire cable.
2. Boot the G5 into Target Disk Mode.
3. Boot the Mac Mini normally. G5's hard drive should appear on the Mini's Desktop.
4. Open a Finder window on the G5's hard drive and drag the Users folder to the Trash (don't delete yet.)
5. Now copy the saved Users folder from the Mac Mini to the G5 (only the Users folder, not the folder in which you stored it.)
6. Eject the G5's hard drive from the Mini's Desktop and shut down the G5.
7. Disconnect the Firewire cable.
Now restart the G5. If all worked well it should start up normally and you should find everything normal in your accounts.
There is one potential problem in all the above. All your account preferences are contained in the Users folder. If you have any corrupted preferences, they will still be corrupted and may continue to cause problems. If that's the case you may need to trash the /Home/Library/Preferences/ folder's contents. Hopefully, this won't be the case, but you should be aware of the possibility.
If eveything is working normally you can empty the Trash and delete the contents. Same on the Mac Mini.

How to do a CLEAN INSTALL of Windows 8.1 with a Windows 8 OEM Key

I have recently purchased a new C540 that has Windows 8 already installed on it. I would like to perform a clean install of Windows 8.1 on this computer.
This is what I have done so far:
I disabled 3 things in the BIOS: IIRC, they were secure boot, quick boot, and something about "optimized" startup
I have changed my boot priority to put the CD/DVD drive first and any flashdrive 2nd
I have figured out my OEM Windows Product Key (this is for a Windows 8 Core/64 bit OS)
I have setup a flashdrive with Windows 8.1 on it
I tried to boot from the flashdrive...when I get the option to install windows 8.1, I click on it and very quickly get the following error -- "The product key entered does not match any of the Windows images available for installation. Enter a different product key."
I added a PID.txt file with my OEM product key in the Source folder of the Windows 8.1 install....I don't get the above error message immediately, but a screen comes up that asks me to enter a Product Code...my OEM product code (being for W8, not W8.1) does not work while using a generic key (for Windows 8.1 Core) yields the same error message as above and exits the installer.
I then added an EI.CFG file that sets the edition to core, the version to OEM, and the Volume to 0...unfortunately, when trying to install Windows 8.1 it still asks me for a product key before installing...I cannot get past this screen even though (to my understanding) the EI.CFG file should cause the installer to skip asking for a product key...
It is important to me that I get to perform a CLEAN install of Windows 8.1...I do not want to upgrade through windows store...the only keys I have are a W8 Pro Retail key (for my laptop) and a W8 Core OEM key (that came with the new C540)...I am using a flashdrive to perform this since I knew I may have to add/change files like the PID and EI.CFG....
I would appreciate any help I can get in solving this problem...I am also willing to try burning an .iso with the PID and/or EI.CFG, but I'm trying to avoid trial and error with that since it is time consuming, requires an ADK, and may waste DVDs...I'd only make an .iso if (for whatever reason) that would work where a flashdrive woud not...

I have a new SSD drive and need to either migrate my old HD data, including the Windows 8.1 OS or do a a clean install. I have obtained the ISO, prepared the boot for the flashdrive and downloaded the install software. It asks for the product key. I used the suggested BIOS reader and obtained "a" product key off the BIOS and used that it but (as above) it does not recognize the image.
How id I get my single Windows license onto my new SSD HD? Reload, clean install, ???
How do I get the proper product key or confirm it is correct?
It is a new system with little data that I need to copy. I just want the operating system. I have the driver disc that came with it.

So how does one perform a clean install on U310?

Hello,
I'm currently annoyed with software that comes pre-installed on the notebook, and would like to perform a clean install of Windows 7. I've got a bootable USB stick prepared, but don't know what to do next. Also, I'd like to install the system on the SSD drive, not on HDD, and don't want to lose warranty.
Could someone who already did this make a step-by-step guide, or at least provide some hints? Thanks!

Hi
Welcome To Lenovo Community
First of all Please create a set of recovery media using OKR .
For installing a fresh OS on SSD you can refer below links
http://www.overclock.net/t/1156654/seans-windows-7-install-optimization-guide-for-ssds-hdds
http://www.sevenforums.com/installation-setup/206250-ssd-w-hdd-windows-7-setup-help.html
Hope This Helps
Cheers!!!
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with Kudos!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Clean install of Windows 8

I am about to perform a clean install of Windows 8, however I don't want to lose my copies of Adobe Photoshop Elements 7.0 and Premiere Elements 7.0. These programs were both pre-installed on my Sony-Vaio so I don't have a media disc for them. How can I retain these programs and activate them on my updated PC?

A clean install of Windows 8 will wipe out your other files by definition as will the recovery disks. Fortunately, Windows 8 has some new Maintenance options not seen in prior versions. You can try an OS "refresh" which will install new Windows 8 system files without disturbing your data or settings.
http://www.pcmag.com/article2/0,2817,2410848,00.asp
You will want to back up your important files before you do this as there is a small chance it can go awry.

Fingerprint Driver Install after clean install of Windows 7

I've performed a clean install of Windows 7 on my X300 (6476CTO). I downloaded and installed the Fingerprint Driver 5.9.2 for Windows 7 32-bit (http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-73583). However, everytime I reboot I get a message that the Fingerprint Reader cannot access dll file vtapip.dll and the fingerprint registration fails. What can I do to remedy this problem?
I did notice on the readme that machines running less than the 5.6 version of the fingerprint software should upgrade to 5.6.2 before installing newer versions. Does this include clean installs? If so, where can I get the 5.6.2 driver? I cannot currently locate it.
Thanks,
Mindy

I have searched for A200 and A210 in the Toshiba sections of Equium, Satego, Satellite and Satellite Pro but their are no Flash card support utility. In the details of the "Value added package" are the words:
"TOSHIBA Flash Cards provides the Hotkey function and the launcher function that starts the Hotkey function and launches the other TOSHIBA utilities"
So I think it's useless to search for this utility. It's more important for me to know which files (like name of the launcher program) must be started to use the FN keys.
John

While intending to perform a clean install of Mountain Lion while continuing with old apps and files, is it a waste to restore a backup that was made while running Mountain Lion as an UPgrade from Lion?

While intending to perform a clean install of Mountain Lion while continuing with old apps and files, is it a waste to restore a backup that was made while running Mountain Lion as an UPgrade from Lion?
Originally I was running Mountain Lion as an UPgrade from Lion. I created a backup in Time Machine, performed a clean install of Mountain Lion, then I proceeded to use Time Machine to restore the back up.
When thinking about the essence of a back up restore, it occurrs to me that for all I know, I may have just wated my time IF Time Machine also restores all the old unneeded files that remain from Lion after an upgrade.
Since the backup was made while running Mountain Lion as an upgrade from Lion, did restoring this backup defeat the purpose of a clean install by reinstalling old Lion files?
If so, how can I re-do the last portion of the process so that I get all my home-folder files and apps back without the full bulk of old Lion files? Migration assistant I'm guessing?
-Chris

Hello John!
Thank you for your response which solved my problem. For other users who may stumble upon this, I'll clear up the confusion and share how I solved the problem with your help; When looking for answers to my computer problems, finding unresolved questions where person B offers a solution and person A never comes back and says "That worked, thank you.", it demonstrates a "k-thnx-bye" user mentality that leaves others with the same problem lost. Without further ado:
It is not clear what you did because the meaning of "clean install" is vague. You can erase a volume and install an OS which leaves none of its previous content intact,
This is what I did: I erased the volume leaving no previous content intact, while then installing OS X Mountain Lion.
or you can upgrade an existing OS (or reinstall the same one) which does not alter your user - installed files.
An upgrade to Mountain Lion from Lion is what I started with initially before erasing anything. This was undesirable. Since this can cause Macs to run slower (especially whereas I'm using a mid-2011 Mac Mini), my goal was to go from operating within an upgrade to Mountain Lion, to operating within an installation of Montain Lion that was not preceded by any other oprating system.
Hence a "clean install of Mountain Lion while continuing with old apps and files" is confusing.
Well put and understood. What I should have said was:
1.Erase the volume
2.Install Mountain Lion clean
3.Confirm that Mountain Lion is functioning properly
4.Proceed to use either Time Machine or Migration Assistant to Import/Migrate/Copy over only two things; My old apps (That had been stored originally in the designated Applications folder) and all files and folders originally stored in the home folder under users.
If you restore from a Time Machine backup then all modifications that occurred subsequent to that backup become erased. It renders moot any OS X upgrade performed subsequent to that backup.
That makes sense and is just as I later suspected.
If so, how can I re-do the last portion of the process so that I get all my home-folder files and apps back without the full bulk of old Lion files? Migration assistant I'm guessing?
Yes.
This is what I did and everything works perfectly. Thank you so much once again!
-Chris

Clean install of windows 8 crashing with BSoD: "attempted execute of noexecute memory"

I recently bought this computer (sorry for hyperlink, but it is much easier than trying to list all the components):
http://www.newegg.com/Product/Product.aspx?Item=N82E16883227593
I added a Samsung 840 EVO 250gb SSD to it, and then I attempted to do a clean install of windows 8.1 onto the SSD from
the reinstall DVD that came with the system. Windows 8.1 appears to install correctly, but when the computer restarts to load windows for the first time, I get a BSoD with the error "attempted execute of noexecute memory". I tried reinstalling, but
got the same error.
Note that for testing purposes, I installed windows 7 on the SSD, and it works great. Unfortunately, I do not have a windows
7 key, so this is only a temporary solution. I would like to figure out how to get windows 8.1 on the SSD and running on the my computer.
Thank you in advance for any help or advice that you can give me.
Here are the minidump files if helpful:
https://drive.google.com/file/d/0B1fPQ--DwbjOV2ZuT0xoeWR6QXc/view?usp=sharing
https://drive.google.com/file/d/0B1fPQ--DwbjOOUtrWUhfZmRMM1E/view?usp=sharing

P
These were Related to RTL8192cu.sys USB NDIS Driver from Realtek Semiconductor Corporation I would remove the current driver and install the newest driver available
Microsoft (R) Windows Debugger Version 6.3.9600.17237 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Ken\Desktop\120414-8515-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*f:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*f:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 9600.16384.amd64fre.winblue_rtm.130821-1623
Machine Name:
Kernel base = 0xfffff801`1981d000 PsLoadedModuleList = 0xfffff801`19ae49b0
Debug session time: Thu Dec 4 05:16:31.298 2014 (UTC - 5:00)
System Uptime: 0 days 0:00:12.923
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck FC, {ffffd000217aaa00, 8000000104112963, ffffd000217aa7a0, 2}
*** WARNING: Unable to verify timestamp for rtwlanu.sys
*** ERROR: Module load completed but symbols could not be loaded for rtwlanu.sys
Probably caused by : rtwlanu.sys ( rtwlanu+10d69a )
Followup: MachineOwner
2: kd> !analyze -v
* Bugcheck Analysis *
ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY (fc)
An attempt was made to execute non-executable memory. The guilty driver
is on the stack trace (and is typically the current instruction pointer).
When possible, the guilty driver's name (Unicode string) is printed on
the bugcheck screen and saved in KiBugCheckDriver.
Arguments:
Arg1: ffffd000217aaa00, Virtual address for the attempted execute.
Arg2: 8000000104112963, PTE contents.
Arg3: ffffd000217aa7a0, (reserved)
Arg4: 0000000000000002, (reserved)
Debugging Details:
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
BUGCHECK_STR: 0xFC
PROCESS_NAME: System
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.17237 (debuggers(dbg).140716-0327) amd64fre
TRAP_FRAME: ffffd000217aa7a0 -- (.trap 0xffffd000217aa7a0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=ffffd000217aaa08 rbx=0000000000000000 rcx=ffffe00003734a70
rdx=ffffd000217aa9f0 rsi=0000000000000000 rdi=0000000000000000
rip=ffffd000217aaa00 rsp=ffffd000217aa938 rbp=ffffd000217aa9a8
r8=ffffd000217aaa00 r9=ffffd000217aa9f8 r10=ffffd00020640000
r11=ffffd000217aa940 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei ng nz na po nc
ffffd000`217aaa00 0000 add byte ptr [rax],al ds:ffffd000`217aaa08=00
Resetting default scope
LAST_CONTROL_TRANSFER: from fffff801199c3e32 to fffff8011996d0a0
STACK_TEXT:
ffffd000`217aa578 fffff801`199c3e32 : 00000000`000000fc ffffd000`217aaa00 80000001`04112963 ffffd000`217aa7a0 : nt!KeBugCheckEx
ffffd000`217aa580 fffff801`19853bc6 : 80000001`04112963 00000000`00000000 ffffd000`217aa720 00000000`00000008 : nt! ?? ::FNODOBFM::`string'+0x468a2
ffffd000`217aa5c0 fffff801`19885ffd : 00000000`00000008 ffffe000`02759880 ffffd000`217aa7a0 ffffe000`052a0000 : nt!MiSystemFault+0xaf6
ffffd000`217aa660 fffff801`1997732f : 00000000`00000008 ffffe000`03734a70 00000000`00000000 ffffd000`217aa7a0 : nt!MmAccessFault+0x7ed
ffffd000`217aa7a0 ffffd000`217aaa00 : fffff800`01db969a ffffe000`03734a70 ffffe000`03000000 00000000`00000001 : nt!KiPageFault+0x12f
ffffd000`217aa938 fffff800`01db969a : ffffe000`03734a70 ffffe000`03000000 00000000`00000001 00000000`00000000 : 0xffffd000`217aaa00
ffffd000`217aa940 ffffe000`03734a70 : ffffe000`03000000 00000000`00000001 00000000`00000000 ffffd000`217aaa08 : rtwlanu+0x10d69a
ffffd000`217aa948 ffffe000`03000000 : 00000000`00000001 00000000`00000000 ffffd000`217aaa08 fffff800`01ccf62e : 0xffffe000`03734a70
ffffd000`217aa950 00000000`00000001 : 00000000`00000000 ffffd000`217aaa08 fffff800`01ccf62e 00000000`00000004 : 0xffffe000`03000000
ffffd000`217aa958 00000000`00000000 : ffffd000`217aaa08 fffff800`01ccf62e 00000000`00000004 ffffe000`03000000 : 0x1
STACK_COMMAND: kb
FOLLOWUP_IP:
rtwlanu+10d69a
fffff800`01db969a ?? ???
SYMBOL_STACK_INDEX: 6
SYMBOL_NAME: rtwlanu+10d69a
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: rtwlanu
IMAGE_NAME: rtwlanu.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 51dd743f
FAILURE_BUCKET_ID: 0xFC_rtwlanu+10d69a
BUCKET_ID: 0xFC_rtwlanu+10d69a
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0xfc_rtwlanu+10d69a
FAILURE_ID_HASH: {095bf10a-821a-1045-f529-a4601d2cff4f}
Followup: MachineOwner
2: kd> lmvm rtwlanu
start end module name
fffff800`01cac000 fffff800`01ea4000 rtwlanu T (no symbols)
Loaded symbol image file: rtwlanu.sys
Image path: \SystemRoot\system32\DRIVERS\rtwlanu.sys
Image name: rtwlanu.sys
Timestamp: Wed Jul 10 10:48:31 2013 (51DD743F)
CheckSum: 001EE009
ImageSize: 001F8000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Wanikiya and Dyami--Team Zigzag

Boot Camp, VIsta with SP1 x64 clean installed. Please help!

I clean-installed Vista Ultimate 64bit with SP1 (SP1 comes with Vista, not a separate download) on the latest macbook. As expected Boot Camp Application doesn't work (it doesn't even install).
1.I want to use the function keys (F1, F2, etc) for brightness and volume, which installation program should I run from the Leopard disk? I don't think I can find this "driver" online.
2.How can I get bluetooth on my macbook working? Which installation program should I run from the Leopard disk?
3.iSight camera. Is there a driver for iSight camera in 64bit Vista?
I see there's a "x64" folder in Leopard disk, under folder "drivers". Should I install everything in this folder? I haven't tried yet.
Thanks for help!

Hi Bjorne,
how did you manage to do a clean-install of Windows Vista with SP1 from a slipstreamed media? If I start my Macbook with the Vista SP1 DVD while holding down the "C" key, I will only see the following message:
1.
2.
Select CD-ROM Boot Type:
I can't go on any further, because hitting any key won't work.
The problem seems to the EFI bootloader on the Vista SP1 DVD which is compiled for 64-bit EFI environments (U-EFI 2.0)! The EFI environment used in Apple computers is based on version 1.10 and runs in 32-bit mode. I've found this information on the rEFIt homepage http://refit.sourceforge.net/info/vista.html and I've also found the homepage http://www.jowie.com/post/2008/02/Select-CD-ROM-Boot-Type--prompt-while-trying-t o-boot-from-Vista-x64-DVD-burnt-from-iso-file.aspx from Jowie who has the same problems. He has found out how to make the Vista SP1 DVD booting on an Apple computer by modifying the DVD image which seems to kill the EFI bootloader...
How did you manage to boot from an unmodified Vista SP1 DVD image?
Greetings,
OllieW

Can I clean install a Windows 7 Pro System Builder on a Lenovo PC with Windows 8 preinstalled?

Hi. I would like to clean install windows 7 on a Lenovo PC that came with Windows 8 core preinstalled. I want to format the entire drive and remove windows 8 and clean install windows 7. I already tried the clean install of Windows 7 Pro to get all of my drivers in line, and now I would like to buy a Product Key.
Would a Windows 7 Pro System Builder work in my case? Would it work just as smoothly as a retail version? I understand that the System Builder is an OEM version that includes the Product Key, COA, and DVD) Just want to make sure before I buy the System Builder version of Windows 7 Pro. Thanks.
Grazzie
Solved!
Go to Solution.

that should be retail since it seemed to be used for pc upgrades either way your new system builder key should work. those are called refresh because they re-released them sincea bug was found in thier installers. Do you have any key in the computer atm? or is windows just waiting to be activated?
EDIT: its a good copy look here> http://www.heidoc.net/joomla/technology-science/microsoft/14-windows-7-direct-download-links
Should you want to use the DVD images permanently, and don't own a product key yet, you can order a Windows 7 OEM or retail version from Amazon. The OEM reinstallation versions contain a DVD with a product key just like the retail versions. They are significantly cheaper, but lack a proper box packaging, and don't include technical support by Microsoft. The OEM key will work with the Digital River downloads, so you can just pick the cheapest one. Sometimes better editions are the cheaper ones, so all of the following links to Amazon offers might be worth checking. I've already tried to find good deals for all editions and linked to them here:
I own a Y510p SLI, and Yoga 2 Pro

HELP!! Itunes wont install on Windows 7. I get an error msg. there is a problem with this windows installer package. A program required to install to complete could not be run. Contact your support personnel or package vendor. WHAT NOW?

HELP!! Itunes wont install on Windows 7. I get an error msg. there is a problem with this windows installer package. A program required to install to complete could not be run. Contact your support personnel or package vendor. WHAT NOW?

Ok, Below is what worked for me somewhat.
Okay ... try downloading and saving a copy of the iTunesSetup.exe to your PC from the Apple website:
http://www.apple.com/itunes/download/
Now download a trial version of WinRAR:
http://www.rarlab.com/download.php
Open the iTunesSetup.exe with WinRAR, and try to run the standalone install of Apple Application Support from the AppleApplicationSupport.msi you find in there.
It works now BUT there are still problems. It is not allowing or recognizing my Cd/DVD player and i CANT burn. Looking still for this fix.

How to perform a clean install of Mountain Lion on MBA without usb?

I purchased a new MBA last November and I want to perform a clean install of Mountain Lion (for various reasons), however, the MBA didn't come with an install usb drive from Apple. When I go to the app store it says I need to buy the OS even though it's already on my computer. After all the searching I've done I can't find the answer on what I need to do. Do I need to buy Mountain Lion even though it came with my computer? Please help, thanks!

If you purchased your MacBook Air in November, it means that your Mac already came with OS X Mountain Lion, so even if the App Store tells you that you haven't purchased it, the truth is that it's registered to your Apple ID and you can redownload it without any problem.
Hold Command and R keys while your Mac is starting to start up into OS X Recovery and try to reinstall OS X. It will ask you for the Apple ID you used to set up your MacBook Air, so introduce it. If the OS X download starts, close the installer by pressing the red button at the top left corner of the window, because you can reinstall OS X.
Then, open Disk Utility, choose Macintosh HD in the sidebar, go to Erase tab and erase the drive. Finally, close Disk Utility and reinstall OS X. Make a backup of your data before erasing your disk

Cannot perform a clean install of CF 10 - ODBC Agent and ODBC Server are not in Services - Win2k8 R2

I've tried to perform a clean install on a Win2k8 R2 x64 server several times and I can't seem to get it to install.
I was upgrading from CF 9, which took several attempts. I eventually got CF 10 working and running with the latest updates. But the server would only run for about 15 minutes and everything would come to a screaching hault. ColdFusion pages would fail to load with no error. The pages would hang and wait for the server to respond, which it never did. Restarting IIS would fix the problem.
I have about 20 CF sites on the machine. I came accross an article that talked about pool sizes, etc. I ended up trying a few things with the Web Server Configuration Tool, and as I was adding/deleting servers, I got an error that some application unexpectedly quit, but it wasn't the wsconfig tool. This happened about 3 times as I was deleting servers that I had previously added. Then I tried loading the CF Admin and I got a 500.0 internal server error.
So I bit the bullet and figured I would start all over again. I uninstalled CF 10... now there's nothing on the machine. Re-installed CF 10, and I get the same 500.0 Internal Server Error. I uninstalled, restarted, installed... same thing. Then I found an error in the event viewer that reads:
The description for Event ID 0 from source ColdFusion 10 ODBC Server cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
ColdFusion 10 ODBC Server error: 0
StartServiceCtrlDispatcher Error!
Then I found out that neither the ColdFusion 10 ODBC Agent or the ColdFusion 10 ODBC Server have been installed... at least they're not showing up in the list of services. msconfig also shows that they don't exist at all. I tried reinstalling several times and I can't get them to show up.
PS: It's 6:15 AM and I've been working on this since 10 PM last night. I NEED HELP! Thanks!

Hello,
Once you move your application from any prior version of ColdFusion to ColdFusion 10, you will have to tune your application, as the architecture changed from JRun to Tomcat.
You can refer to the article http://blogs.coldfusion.com/post.cfm/tuning-coldfusion-10-iis-connector-configuration for parameters, that needs to be tuned appropriately to make CF connector works flawlessly.
Hope this helps
Regards,
Anit Kumar

Error 0x80070015 on clean install of windows 8.1 enterprise

Hi, I am receiving and error 0x80070015 when trying to do a clean install of windows 8.1 enterprise evaluation on to a newly built PC. I am installing from a USB stick to a brand new SSD running in ACHI mode. Each time the installation reaches
12% on the 'getting files ready for installation' I receive this error message. The first time I tried the installation I also got an error message 0x800703ee but this has now stopped.
Please go easy on me, I'm not an IT pro, I want to check out windows 8.1 on this new build to decide if I want to go with it or stick with Windows 7 on this and my other work PC.
Any advice gratefully received.
Thanks, Simon

Hi,
Error code 0x80070015 usually means "device not ready" and is often seen when the USB drive or disc is having issues.
Please re-create a bootable USB or DVD to check the results.
Another thing is that there might be some SATA clash on your system with the new SSD connected. Please try to enter the WinRE from your USB drive and try following commands to create new partition:
1. Use Diskpart command line to show the partition on your disk:
Run CMD as Administrator, type following command line one by one:
DISKPART
List Disk
Select Disk 0
2. Delete the system partition (if there is, it can be about 100~200MB) and C partition, delete these 2:
List Partition
Select Partition 0 (I suspect that there is the system partition on this disk and it’s the partition 0)
Delete Partition
Select Partition 1 (I suspect that this is the C drive)
Delete Partition
3. Create new one.
Create Partition Primary
4. Try to restart system via installation disk and reinstall Windows 8 on it.
For detailed information about this command, you can refer to this article:
DISKPART:
http://technet.microsoft.com/en-us/library/cc770877(v=ws.10).aspx
If the issue persists, please run Check disk tool in WinRE:
CHKDSK /R /F
Any error message, please post back.
Hope these could be helpful.

Help with Performing a Clean Install of Windows 8.1

Similar Messages

Maybe you are looking for