Help with printer driver error message after Yosemite upgrade

Hi, I have a MacBook Air and just upgraded to OS X Yosemite Version 10.10. Following the upgrade, I am not longer able to print wirelessly at university. When I tried to reinstall the printer drivers, I got the following error message "The file /Volumes/InstallLibraryPrinter/.drivers/bizhub_C364_101.pkg does not exist". I do have access to IT support, but they were stumped by this error too. Do you have any suggestions for how to fix this, so that I can print again? Thank you for your assistance.

Re: Can not print in Preview app
may help - it shows where to download the 10.9 drivers.

Similar Messages

How can I resolve iCal desktop application error message after Yosemite upgrade?

After upgrading Yosemite on my MacBook Air, MacBook Pro and iMac, my iCloud calendar generates an error message: "The server is currently unreachable or the connection was blocked."
I am able to create and edit my iCloud calendar events on my iPad, my iPhone, and any browser by signing into iCloud.com.
All other services such as Mail, reminders, keychain, and so on continue to work normally.
Other services like Google's Calendar continue to work seamlessly across all mobile devices, web browsers, and the iCal desktop applications.
I have logged out of iCloud in System Preferences and then logged back, but that did not resolve the issue.
This is concerning since I am unable to add, edit, or delete events in the iCal desktop software on my computers.
Any help welcome!

Found my solution!
When logging back into iCloud in System Preferences, I received an error message that my (iCloud) account could not verify the "identity" of the "p03-caldev.icloud.com" account.
I was required to "trust" an Entrust.net Secure Server Certification Authority certificate to remove the error message.
Everything now synchronizes across iCal on my computers and my mobile devices/icloud.com.

Help! Still get error message after installing new hard drive

The original problem is below and thought that it would help to include it to see the initial problem.
I went out and bought a new hard drive (500gb) and installed it in my laptop. I went to use the restore disks and I got the same exact error mentioned below. I used a set of disks that I copied from the original recovery disk and it still did the same. What is the error code and how can I fix this!!
Please help!!
I have a Satellite A215-S7444 laptop and everytime I go to restore the drive to it's factory settings using the Toshiba recovery wizard I get the following error: ERROR: 03-EEEE-000, AN ERROR HAS OCCURRED, PRESS [OK] TO TURN OFF COMPUTER.
Just a note, I have used my recovery disks to restore the factory settings before with no problems at all, now I get this message. All the files are accesible on the CD and I have no virus' on my computer.
Lastly, the image part of the drive (The one that is like 1.5 gb) which is usually visible is not any more and has not been for a bit when you should see it when you open "My computer". You can however see it when I go to "Administrative Tools-Computer Management." It states that the drive is Healthy (EISA Configuration), type is basic, and there is no file system associated with the drive and there is no drive letter for it either.

Thanks for your quick reply! I was wondering if anyone would reply!
I made the copies on a suggetion that the original may be scratched or something so I figured what the heck? I did format the hard drive though. It is a Seagate 500gb hard drive. I only formatted the whole drive and figured that the restore disks would make the additional partition.
Aside from that, it's the same error message that I had on the original drive. The original drive and OS works (Vista), but I wanted to restore it because I just wanted to wipe everything and start clean. What can be causing the error message, and what IS the error message?
Anymore suggestions or help would be great as I am in desperate need of getting my computer back to working.
Thanks again for replying!

Photos are there but the videos are appearing as blank icons with an error message after the upgrade to Yosemite

I bought myself a new MacBook Pro and migrated everything from a Time Capsule/Time Machine migration. My previous computer was slowly dying so I had backed it up although it was running Mavericks. I migrated everything to the new computer from a Time Machine backup - all my photos and files are there - but in iPhoto, the videos (taken with a camera as .MOV files which usually appear in iPhoto) are appearing as blank icons. When I click on them, I get the error message, "The operation couldn’t be completed. (OSStatus error -54.)" and the video doesn't play or appear. The video does, however, appear when I click on "Reveal in Finder - Original File" - so the files are there - they just aren't being compatible with my iPhoto in Yosemite.
Any idea why?

Do you still have access to the old system? If so drag the iPHtoo library on the new system to the desktop and Connect the two Macs together (network, firewire target mode, etc) or use an external hard drive formatted Mac OS extended (journaled) and drag the iPhoto library intact as a single entity from the old Mac to the pictures folder of the new Mac - launch iPhoto on the new mac and it will open the library and convert it as needed and you will be ready move forward.
LN

Unable to load HP printer driver-Error message!

Hi,
Just wondering if anyone can be of any assistance.
I recently purchased a HP Photosmart 2575 all-in-one printer and installed the necessary software, which said it was successfully installed. However, whenever I boot up the G3 I keep getting the following message 'Unable to load the printer drive, open the applications Get Info dialog and increase the preferred memory size. If this does not help try quitting all other applications or reinstalling the printer software.'
After clicking ok on this message about four times the message goes and I am able to print fine. Just wondering why this is happening. I have increased the memory allocation and also turnt on the virtual memory to see if this makes any difference, but all to no avail. I have also uninstalled and then reinstalled the software to see if this makes a difference, but that didn't help either.
Any help would be greatly appreciated.
Thanks in advance
PS: The printer is connected via ethernet on my router to enable me to print from another machine

Use Techtool Lite or Trash*Desktop (TD may delete Finder comments )to rebuild your desktop w/extensions off. Does a better job than manually & you avoid all the finger gymnatics. You just have to hold down the shift key to shut off extensions.
Restart to turn the extensions back on again.
If you want to rebuild manually, see KB article http://docs.info.apple.com/article.html?artnum=10182 Rebuilding Desktop File and Icon Recovery.

Can you help with this serious error message?

I have Premiere Elements 8. I tried to open some .prel that I have made and now I get this error message: Projects created with Adobe Premiere Pro and Adobe Premiere Elements are not compatible. Please use the appropriate application to open this project. What gives?? Also, as usual, Premiere Elements 8 crashes after I have accomplished one lousy thing, so I have to constantly open project and save. Now I can't even open a project.
Thanks for any help you can give me.

Holy cow! Something is seriously wrong here, lilthea!
What model of camcorder is your video coming from and what format and resolution is it?
What project settings did you select when you set up your project? (You can see them under Edit/Project Settings.)
Version 8 was not the best version of the program ever produced. In fact, it was one of the worst, when first released. But if you downloaded the update (from Help/Check for Updates) and the rest of your system is stable, you should at least be able to edit video from a miniDV, HDV or even AVCHD camcorder.
If you truly can't do ANYTHING without it crashing though, there's something much, much deeper going on that a bug in your program or its set-up. (This is why I need you to be as specific as you can about things!) If things are really that unstable, it could indicate malware or viruses or possible corruption of the operating system.
I sometimes recommend a program that I use every week but that some people object to because it's Chinese software and has been accused of stealing virus definitions from other software companies. But it's got an easy interface. Just select Deep Care, click the go button and then select the option to clean. In my opinion, it makes your operating system as good as new. But there are some people who disagree, so that's my personal recommendation only.
Download the free version from here:
http://www.iobit.com/advancedsystemcareper.html
What you're dealing with could be problems with your source video -- since I don't have enough information to say either way. But, assuming your video came from a miniDV, HDV or AVCHD camcorder and that you've properly set up your project to those specs, a tune-up using Advanced System Care might be worth considering.

Can anyone help with the following error message?

While installing itunes update 7.5 received message Error 1905 module c:\programfiles\itunes\itunesminiplaayer.Dl failed to unregister HRESULT-2147220472

I noticed no one replied to your questions but was wondering what you found out. I had an ipod shuffle and just replaced it with a 3rd gen ipod nano. The new nano who not show up on my itunes so I went in to update it to the new version and received the same exact error message you did. Were you able to figure out a solution?
Any help you can give would be greatful.

Help with Encore CS5 Error Message

When I try to load an Encore CS5 Project with Encore CS5 or CS5.5 I get this error message: Adobe Encore as encountered an error. [..\..\Src\Clip\VideoClip.cpp-276] I am running win 7 64x. Any help appreciated. -ed

As well as the below, right click the Encore icon and select Run as Administrator... which fixes several "odd" problems
Long File Names or odd characters cause problems
Read http://forums.adobe.com/thread/588273
And #4 Here http://forums.adobe.com/thread/666558?tstart=0
And This Message Thread http://forums.adobe.com/thread/665641?tstart=0

Help with "Testing Failed" Error message in iWeb09

I bought the iLife 09 upgrade purely so I could publish to my own domain server. I have a MobileMe account and iWeb09 publishes fine there--no problems.
My domain name is hosted on a Windows NT server. The admin is willing to help, but I was hoping someone could point me to documentation for this error:
"Testing Failed.
Unable to write to server. Verify your settings and try again."
If I ftp to the site in a terminal window and do a put, I can write to the site. Obviously, I could at some point, because it servers the "dummy" page I put up, but I tested again in case my permissions had changed.
I looked at the "Publishing to Windows-based FTP Server" but it does not seem to describe this error.
BTW, I pay AppleCare for support, but when I tried to get support documentation from them, the tech said they "can't help" with this part of iWeb and hung up on me--the call lasted exactly 90 seconds.
I am hoping someone out here will know where the errors are documented or will be able to help me figure it out.

I waded through the posts for iWeb09 and came across a recommendation for Cyberduck (www.cyberduck.ch), so I tried a copy. Works like a champ. Unlike iWeb09, all I had to do was type in my server name, user name, and password to open the connection. Then I published my site to a folder in iWeb and uploaded the folder in Cyberduck. Cyberduck had no problem writing to the server.
I still would love to know why iWeb can't write to my web server.

I need help with an application error message

AcroRd32.exe.- application error message appears. It states that The instruction @"0x60006db6" referenced memory at "0x60006db6". The memory could not be "read". Click OK to terminate program.

Please try to repair the Installation from control Panel-> Add Remove Programs-> Adobe Reader-> Repair.

External Hard Drives not Mounting after Yosemite Upgrade

I've just upgraded to Yosemite, and none of my external (USB) hard drives are mounting (they don't even appear in Disk Utility).
Any ideas?

MacBook Pro 2009. 250 SD, HD 8Gb Ram.
I have had this issue for about a year...with no resolve!
Apple and the User community have not been able to solve issue.
I have had to work around it since the Oct 2013 Mavericks upgrade which “killed” (rendered unmountable) both my USB and Optical drives.
Hundreds of replies and remedies have not corrected my issue. Hundreds of replies stating that if there was a global issue it would of been fixed by Apple, not true. And dismissive replies stating that there must be a hardware issue are very discouraging.
So now, hoping to help the voiceless masses, I'm forced to share my experience.
As I stated, I have been having the issue since one of the Mavericks upgrades. The upgrade rendered externally attached drives unmountable...They are all seen in Disk Utility. They are just not mountable. Regardless of the flavor of the disk format, either Mac or PC, they are found, seen and refuse to mount. I can see them using Terminal commands, I can see them in System Report. I can reset all the memory I want...turn it off, reset, sleep, turn on, restart...NOPE...And the optical drive takes in disks but ejects them after an attempted mounting. Keep in mind, there are no physical issues with either USB or optical drives.
So now...I have had enough and need to correct the issue or buy a new equipment - starting to get into software development and need working equipment!!!
For the past month, I have been visiting the Apple store to assist in my issues...Back Story: I'm an IT Field Tech for the largest department store in the country and I have the good fortune of dropping in the Apple store anytime I want...The Geniuses booted the MB with a bootable image of Mavericks, and the USB and Optical drives WORKED fine...So, after I had stumped the Geniuses with my problems, we agreed that we would attempt to format and re-image the MacBook...Fine, do it, it's backed-up, how you ask? - Via my wireless My Book Live 3T drive, which only took 24 hours to backup, AKA Time Machine!
Great news! The re-image of Mavericks proved to work! I WAS able to mount external drives attached! How is that possible? Don't know, don't care! It just worked! So happy!
But wait! I then took the laptop home. Connected to my WiFi, to update Mavericks to the latest version...Good so far! Then it came time for a Time Machine restore, AKA Migration Assistance restore...So, I proceeded to migrate data back to my MB via wireless drive, good so far, booted in Migration Assistant, and I chose to restore everything except the network files, thinking that may be an issue...22 Hours later, the MB migrated without issue...all apps and personal files had migrated! YAY!
BUT NOW THE USB AND OPTICAL DRIVES FAILED TO MOUNT!!!
Great now what? I know, I will just re-image and start again...WAIT, I don't have a Mavericks Install Disk, no problem, I will just create a bootable USB drive with the Mavericks Install Image I downloaded onto my MB this month...NO YOU CANNOT, because you have no use of the USB drives!...And, Apple stopped making OS CDs back in 2009...Oh, and that wouldn't of done me any good, because the optical dive was unusable, anyway!
SO, back to the Apple store with my head hanging! At this point, Yosemite came out the previous Thursday, so no more Mavericks images, great! Perhaps the new OS will alleviate my nightmare!!!!...So, they re-imaged my Mac with Mavericks, drives worked again! SO, I took my MB home and attempted to download the new OS, Yosemite...which only took 2 days due to the amount of traffic on Apple's servers!...Anyway, Yosemite finally installed without out issue! Drives still worked! And so, I shutdown and restarted the system...No issues, USB and optical drives worked beautifully! Yay, Yosemite!...Fixed all my troubles!!!...Not so fast...
And so, I, again, attempted to do a Time Machine restore, via WiFi, this time it took 24 hours to restore...AND it worked! All apps and personal files transferred without issue, So happy! Put the laptop in Sleep and left it home and went to work! Came back from work, tested the system without issues. Rebooted...USB and Optical drive are NOT MOUNTABLE!
So now, what is the file that the restore keeps pushing to my MB that kills the USB and optical drives?
I would just stop restoring from a Time Machine backup, but the only way to get into the TM image is to use Migration Assistant. I cannot view the date in time of the image in TM's Star Wars time line. So, I'm forced to back up everything from the image in Migration Assistance. Not sure that it being an encrypted image has anything to do with it...
...Regardless, what is being “restored” to the MB that continues to configure the OS in such a way that makes all external drives unmountable...keep in mind, my external keyboard, hub and mouse are usable via USB.

ITunes restore error message after iphone upgrade to OS5

Since installing iphone OS5 I've been getting a message when connecting to itunes that my restore was interrupted and would I like to continue to restore from my last backup. I've tried restoring several times and I keep getting the same error message at the end of the restore. I also had trouble installing the OS5 upgrade because of an error -34 (something related to the fact that my music was compressed). How do I restore my phone so that this error does not keep appearing? It seems no data was lost.

Do you still have access to the old system? If so drag the iPHtoo library on the new system to the desktop and Connect the two Macs together (network, firewire target mode, etc) or use an external hard drive formatted Mac OS extended (journaled) and drag the iPhoto library intact as a single entity from the old Mac to the pictures folder of the new Mac - launch iPhoto on the new mac and it will open the library and convert it as needed and you will be ready move forward.
LN

Error message after iTunes upgrade

The error message reads:
"The attempt to burn the disc failed. The device failed to calibrate the laser power level for this media."
What does this mean?
I am using the same discs as I always have. I just installed the latest upgrade. version 6.0.5
imac Mac OS X (10.4.4)

Well, I thought that the iTunes upgrade had something to do with my inability to burn CDs. I can't say for sure that was the case but I do know that what fixed my problem (if you can believe this) was installing the QuickTime update. I'm thinking that the iTunes update corrupted something, but installing the QT update corrected the problem. Now I can burn with no problems whatsoever. You may want to give it a try.

Error message after kdelibs upgrade

Hello, I hope this is the right forum for this
I ran "pacman -Su" today and it upgraded my kdelibs...
now each time I try to leave konqueror settings I get the error :
There was an error loading the module.
The diagnostics is:
Library files for "libkcm_crypto.la" not found in paths
Possible reasons:
An error occurred during your last KDE upgrade leaving an orphaned control module
You have old third party modules lying around.
Check these points carefully and try to remove the module mentioned in the error message. If this fails, consider contacting your distributor or packager.
It doesn't affect so far anything else I've seen....
Thank you

kdelibs is rebuilt because of the really-not-so-funny update of openssl ... and now i try to reconstruct what else changed in kde to solve it
thanx a lot for this posting
the file it mentioned is not existend in the vanilla arch, so another kde-pkg has to be rebuilt too (besides kdelibs and kdenetwork that is building right now the 2nd time)
please be patient, i work on this
EDIT:
kdebase is rebuilt ... and available in about a hour ... it should solve this (it works for me on a uptodate arch installation)

ITunes help with syncing; many error messages, Help please!

So, I have downloaded and re-downloaded the new iTunes 10.7 about a thousand times. Everytime I try to download, I get the message "rolling back" and then it starts up again and continues to download. Once downloaded, I plug my iPod touch 4th generation in and I get two pop-up messages: the first says "...mobile device is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation or contact your system administration or the software vendor for support." The next message I receive is "iTunes requires a newer version of Apple Mobile Device Support. Please uninstall both Apple Mobile Device Support and iTunes, then install iTunes again." What am I doing wrong? Can someone please help? I would greatly appreciate it. I have been at this for about 4 hours and all I want to do is buy the new Red album and listen to it commuting to college.

Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Mobile Device Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Mobile Device Support", click "Change" and then click "Repair".
Can you connect without the errors now?

Help with printer driver error message after Yosemite upgrade

Similar Messages

Maybe you are looking for