Help With Printing Multiple Pages on Single Page

I am trying to print a calendar on a single 11x17 sheet of paper. Currently the size of the calendar is forcing the application to want to print 3 pages. I have a ministry requirement that requires the calendar to be printed in Arial size 16 font and print
on a single page. Is there any way to fit this document on to one page?
Thank you

I would set it up with a landscape page size of 11x17. Insert tables for the calendar, floating if necessary. Insert the text. This is not using a calendar wizard or anything of the sort.
Tables
Are we talking a week, a single month, two months, a quarter, four months, six months, or a year? Very much is going to be very crowded!
As an alternative, you could try setting it up for two portrait pages and then tell word to print two pages per sheet. You would lose some paper to wider margins this way. (I have only done this with 8-1/2 x 11 pages but the principle should be the same.)
This would require starting with an even larger font because Word would scale it. If you need exactly Arial 16 it may be tough to get.
p.s. I envy your ability to print on 11x17.
Charles Kenyon Madison, WI

Similar Messages

Printing multiple images on single page

Can anyone explain how to print multiple images on the same page such as 4-4x6 photos? Or the same image more than once on a page - similar to the N-up option in iPhoto? Anything new and helpfull for printing in 1.5? Thanks.

No, it isn't what we're looking for.
Let's take the example of a professional portrait photographer (me? ) trying to set up a home-lab with a wide format, roll printer.
I get an order for, say, 2 4x5 of image 1, 2 4x5 of image 2, 4 5x7 of image 3. I have 10" paper loaded in my roll.
What I would want to do is gang the prints onto 3 "units" - the 4 4x5 on one 8"x10" unit, and 2 5x7 on each 7"x10" unit.
Since my clients ordered specific sizes, I need to make sure I get the prints sized exactly right (contact sheet tool doesn't let me do this) and since printing is pricey, I want to make sure to waste as little paper/ink as possible. I also don't want to get stuck doing a lot of trimming.
So, in lightroom, photoshop, imagebuddy, portraits-n-prints etc, I would just ask the app to output the package for me. In Aperture, I'm stuck. I can't use the book tool because it uses a (moronically) fixed page-size. I can't use the contact sheet tool because it doesn't let me specify image size/aspect ratio. I can't use the "standard" print tool because it only prints one image per page.
This is a glaring omission, and a slap in the face to the professionals that Aperture claims to see as its target audience.

Firefox prints pieces of a single page on multiple pages

Firefox prints pieces of a single page on multiple pages. For example, if a page is only one page long in IE, it will print one page. But if I print the same page in FF, it will print 5 pages, and each page would have a different section of the original web page. Same thing is valid for web images. I have tried upgrading to the latest version of FF 3.6.12, and I have tried uninstalling and reinstalling my print driver (Brother MFC-7420), and have tried rebooting my PC, and have tried changing the print settings from within the Printer's menu and the Firefox print settings.

Check the paper size that is selected in your printer's preferences when viewing those prefs through Firefox. Or maybe the left & right page margins are set unusually wide for that printer within Firefox.
http://kb.mozillazine.org/Problems_printing_web_pages#Prints_to_a_small_portion_of_the_page

I am unable to print multiple copies on 1 page

I have a macbook and I used to be able to print multiple copies on 1 page. It had a selection on the bottom right. Now something has changed with the format. It allows me to select multiple copies, but only prints one.

Hi,
In order to print multiple documents on one page, you may follow the steps mentioned below:-
Press Command+p- Select multiple pages or booklet
If you are not getting these options, please send us a screenshot to better understand the issue.
Regards,
Nakul

Is it possible to have multiple links in single page?

Is it possible to have multiple links in single page for
linking in different slides like in a websites? My deadline is
nearing in. Adobe folks please help me.

> Is it possible to have multiple links in single page for
linking in
> different slides like in a websites? My deadline is
nearing in. Adobe
> folks please help me.
>
Add multiple click boxes to the page.
Steve
Adobe Community Expert: eLearning, Mobile and Devices
European eLearning Summit - EeLS
Adobe-sponsored eLearning conference.
http://www.elearningsummit.eu

Printing multiple photos onto one page

Sorry, fairly new to PSE9!
Have a group of photos I need to print to actual size (3cm x 4cm) to go into a photo frame. They are all cropped and ready to go but there doesn't seem to be an option to print multiple images onto one page at a custom size? A contact sheet only gives me the option for the number of columns and picture package doesn't give any such option either as far as I can see! I'm sure I must be missing something here!
Any help much appreciated! Don't want to waste photo paper printing each small photo individually!

http://www.elementsvillage.com/forums/showthread.php?p=206785#post206785
Post #6 in this thread provides standard directions.

Is it wise to chage site design from multiple page to single page scrollable design for SEO?

I have a current site with multiple pages created in Muse. From watching some tutorials I am beginning to believe that converting the site to a one page scrollable format would be more applicable for table and mobile applications. My questions are these:
By adding anchor points and links to the stacked pages will this act the same as independent pages for SEO, or will I lose all of the current web traction I have earned and be starting over?
Is it commonly accepted that by converting to a one page format that it will be easier for search crawlers to rank my site?

Hi,
Single page websites can be great for new sites or for some special projects, but I won't recommend them as long-term solutions and, if you already have a multi-page website, I do not recommend switching to a single-page site.
If your single page site has great content and good structure, google might provide same treatment as it does for various sub pages website.
A useful Video by Matt Cutt, head of the webspam team at Google
Search engines will index all the pages of your website, providing multiple opportunities for your site to come up in searches. When your site consists of only one page, a single page is exactly what you’ll have indexed.
That means if you have many services, many products, single page design will really compromise your rank and result in search engine.
Do let me know if you have some more questions.

How to print multiple footers for each page in RTF template xml report.

Hi,
How to print multiple footers for each page in RTF template xml report.
i am able to print ( two sets ) ...
up to last page ( one template ) and for last page ( another template).
i want to change the footer information based on the group value printed in the report ( it might be 5 to 6) In every report run.. can you please check and let me know do we have any feasibility to achieve this.
Thanks in advance.
Regards,
KAP.

You can remove all other logic, like last page only contents (start@last-page:body), etc and section breaks if any you have inserted manually.
Just have for-each@section logic.
It would be difficult for me to guess what you have done without looking at your RTF or describing here.

How do I print multiple copies of a page in a PDF File?

How do I print multiple copies of a page in a PDF File? For some reason I tell it to print, for example, 3 or 4 copies of a certain page and it will only print one copy!!!

OS X 10.9.5Adobe Reader 11.0.10
I increase the number of copies to 3, 4, or 5 (etc.) but it would still only print one copy of the designated page/pages.
From: pwillener <[email protected]>
To: Caren Harris <[email protected]>
Sent: Friday, March 6, 2015 9:17 PM
Subject: How do I print multiple copies of a page in a PDF File?
How do I print multiple copies of a page in a PDF File?
created by pwillener in Adobe Reader - View the full discussionOperating system? Reader version? If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7262032#7262032 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7262032#7262032 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Adobe Reader by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Print 3 checks in single page Thru F110

Hi
I have a req to print 3 checks in a single page from Tcode F110..
Do i need to look for any User-exit to do this? OR
Do i need to copy the standard Prog RFFOUS_C and modify according to the req..Which is the best option?
If the modifying the Std prog is the only option Could you please let me know where exactly i need to modify the change
Please let me know
Govi

I forgot to mention this
Which form should i use? is it F110_PRENUM_CHCK or F110_MX_CHEQUE?
I only want to print name amount date on this form ...coz we wil use the pre printed checks so only name amount date will be printed on that paper..Iam not sure how can we print 3 checks in single page using the standard program and Custom script..
Please advise
Govi

ADE 2.0 does not have functions of divided page and single page- like ADE 1.7?

I have a question for specification between ADE 1.7 and ADE 2.0.
ADE 2.0 does not have icon buttons for "divided two-page" and "single page" like ADE 1.7? Since ADE 1.8 Preview version was temporarily available to download, there has been disappeared such functions....

There are lots of bugs in ADE2.0 (and 2.0.1). Try replacing ADE2.0 with the older but more reliable v1.7.2.
(You can have them both installed at once if you like.)
Version 1.7.2, it is a little difficult to find, available on Adobe site for Windows and for Mac.
http://helpx.adobe.com/digital-editions/kb/cant-install-digital-editions.html
The forum software is sometimes corrupting the link above. There shouldn't be a blank in 'editio ns.html'. The following redirects to the same page: http://tinyurl.com/diged172
Some people have found ADE trying to upgrade automatically.
It appears (not 100% sure) that if you install ADE2.0 as a new install (not as an upgrade) that your 1.7.2 will continue to run.
Probably best to say no if 2.0.x installation asks if you want to migrate your library.

Help with Print Layout Designer

Hi all,
I'm not sure if I should post this here or not, I already posted it in the Business One Forum. Moderator(s) if this is not the proper place please delete it and let me know that it is not the appropriate venue.
I need some help with Print Layout Designer. I am running 2005A SP01, and my customer wants a modification to the Sales Backorder Report. They want to add the column "In Stock" to both the report as displayed on the screen and the printed document. The report rendered to the screen has the In Stock, but it is not checked as visible. I check it and In Stock shows up as designed. The part I am having problems with is the printed document. I opened the PLD from the Backorder Report, and saved it under a different name. I resized some of the columns in the repetitive area (header and data) to make room for the In Stock column. I CAN add the text field Instock as free text and enter "In Stock" as the content. I looked at the "backorder" column in the PLD, and it is a text field with the source System Variable and the variable is 109. I would assume that all I need to do in my added column is to set the source to System Variable and enter the variable number. That is the problem; I can't find the variable number for that column. I looked on the report rendered to the screen with system information on and the variable is "3 #000027825,OnHand". I looked at the Back Order column of the report rendered to the screen and the variable is "3 #000028725,OpenCreQty". I found a spreadsheet that is supposed to contain a list of system variables for 2007A, but the document type for this report is BRDR and that document type does not appear in the list of document types in that spreadsheet. I looked for a similar spreadsheet for 2005A SP01 but didn't find one. I DID find a document "How To Customize Printing Templates with the Print Layout Designer". According to that document, I should be able to get the system variable from the report rendered to the screen with System Information turned on. Can anyone help?
TIA,
Steve

I haven't dealt with this before so I can't be certain, but here are my thoughts.
The Backordered Qty is probably a calculated field, so that's why it's a system variable. The In Stock is a defined field, so you probably can use the file and field number, OITM, OnHand. I would look at maybe the stock number or description to see how those are setup on the form instead of the backordered qty field.

I need help with printing labels. please

I need help with printing labels. thanks in advance

Welcome to Apple Support Communities.
In Address Book, first select a name or group of names to print.
Then File, Print, select Style, Mailing Labels, then Layout to select a specific target label (such as an Avery number), or define your own...

How to print multiple copies of same image (with specific fixed dimensions) on single page

I am using Photoshop Elements 10 on Win 7 PC. I am trying to print multiple copies of one image on a single 8.5x11 sheet of paper? The images are artwork for buttons (to be used in button-making machine) so the dimensions must be exact on the duplicated images. When I select Picture Package, the images are resized to fit the dimensions in the picture package. When I select Contact Sheet, the images are resized to fit the number of columns I selected. Neither is acceptable. How can I repeat the same image on a single piece of paper without having the system re-size the image? I know that I can manually create a new PSE file and manually insert the images into this file. This is what I have been doing as a work-around. But I would hope there is a better/faster way.
Thank-you!

A variation of hatstead's method where the pictures are precisely aligned:
1. Add the picture to the blank file as hatstead described. Use the Move tool to position the picture in the upper left corner.
2. Duplicate the layer. Use the arrow keys (NOT the mouse) to move the new layer to the right.
3. Repeat step 2 until the row is filled:
4. Merge Down the 3 layers into one. Alternatively, link the 3 layers and do a Merge Linked as in this example. The end result is the pictures in the row are on one layer:
5. Duplicate the layer and use the arrow keys to move this down to the 2nd row.
6. Repeat step 5 to create additional rows.
7. Finally, to center the whole thing on the sheet, link all the row layers and position with the arrow keys.
Note that you can also custom-make your own Picture Package. Instructions for this should be somewhere in Help.

Help convert spread pages to single pages when converting Indesign to PDF for printer

I have an Indesign booklet of 28 pages which I need to convert to pdf as single pages so I need to turn off the spread pages/facing pages option so I can convert to pdf to get it printed. I know how to turn the spread/facing pages off but when I do this it affects the master page and all the pages become left hand pages and the headers/page nos are in the wrong place. I have looked at numerous websites/blogs and everyone seems to have the same problem. Can anyone help me please as this is really urgent now?

Actually, you DON'T want to undo the facing pages. Just export using the settings recommended by the printer and you'll get one PDF with individual pages, not spreads, as long as the Spreads box is not checked.

Help With Printing Multiple Pages on Single Page

Similar Messages

Maybe you are looking for