Help with using a web page from disk after saved from web

Hi, I almost forgot the little I learned about web page development, so, I'm a total noob when it comes to this and I need your help.
I saved as a complete web page on my hard disk this web page but when I open it in Firefox or IE, it doesn't display as much as I need it. I'm mostly interested  in displaying the logo images as they appear on the original web page. The browsers just show them briefly when refreshing but hide them right away. I can see the image files downloaded to my hard drive and if I open the page in Dreamweaver it displays these images  in the preview pane but I can't make them show in the browsers. From Dreamweaver I saved the page as in the folder where the images are and this also updated the code with the relative image links but the browsers still don't show them.
I will greatly appreciate your help with this.

I'm sorry, but your post is very confusing
I saved as a complete web page on my hard disk this web page
Does this include site definitions?
when I open it in Firefox or IE, it doesn't display as much as I need it.
I dont know what this means...are there images that are not being displayed?  Is there styling that is not being rendered?
. I'm mostly interested  in displaying the logo images as they appear on the original web page. The browsers just show them briefly when refreshing but hide them right away.
Again, I dont know what this means?
I can see the image files downloaded to my hard drive and if I open the page in Dreamweaver it displays these images  in the preview pane but I can't make them show in the browsers. From Dreamweaver I saved the page as in the folder where the images are and this also updated the code with the relative image links but the browsers still don't show them.I will greatly appreciate your help with this.
Do you have a link to the page, and perhaps some explanation that is more clear as to what your issue is.
Gary

Similar Messages

  • I use to be able to rotate my iPhone and change the view of an image, Web page, email, and so on, from portrait to landscape, but after update, I cannot. I can only view in portrait mode. Anybody know what's up with that?

    I use to be able to rotate my iPhone and change the view of an image, Web page, email, and so on, from portrait to landscape, but after update, I cannot. I can only view in portrait mode. Anybody know what’s up with that?

    You need to do the basic troubleshooting steps described in the User Guide, Appendix B.
    Restart phone
    Reset phone
    Restore in iTunes using a backup
    Restore in iTunes as new, without using a backup
    If restoring as new doesn't help, there is a hardware failure in the phone that needs evaluation by Apple.

  • Page numbers incorrect after conversion from Excel to pdf

    Page numbers incorrect after conversion from Excel to pdf
    ""This above link (thread:834599) is from a case back in 2011 that claims to solve this problem, but it does not solve this problem. I think that customer only cared about having continuous page numbering, not discrete page numbering per sheet.
    ========================
    I still have this issue in Acrobat XI and MS Office Professional Plus 2010. I keep upgrading to no avail. This regression has resulted in a huge time drain for me. If you fixed it, please explain how I can get my hands on the resolution.
    Previous versions of Excel and Adobe Acrobat enabled flexibility around the "Page #" of "Number of Pages" (Page &[Page] of &[Pages]) token, depending on context and usage. The "# of pages" token could represent EITHER the number of pages in the workbook OR the number of pages in the tab/sheet, depending on how you generated the PDF:
    You could select "Selected Sheets" and then select all or some of the individual sheets in the workbook, and the PDF would honor the discrete numbering of each of the sheets, so the first page of each sheet was p1 and the "# of pages" was the number of pages in the sheet; not the number of pages in the workbook; or
    You could select "Entire Workbook" and the PDF would honor continuous page numbers across all sheets, as a single document.
    Now, it only honors the total number of pages in the workbook, regardless of the method you use to publish to PDF: saving as PDF, printing to PDF, using "createPDF" from Acrobat plugin to Excel's menu ribbon; selecting all sheets, some sheets, or Entire Workbook; automatic First page number or "1" under Page Setup > Page> First page number. (This last option, btw, does restart every sheet at p1, but it hardly makes sense if the total number of pages is still the total number in the workbook instead of the number in the sheet.)
    I spent a lot of time trying each which way that the blog posts recommended and have tried this on multiple versions of Excel and Acrobat now.
    NONE of these time-consuming experiments gave me what I wanted.They all insist that "Page #" of "Number of Pages" (Page &[Page] of &[Pages]) is the total number of pages in the workbook or the total number of pages in the selected sheets combined.
    The numbering are correct in Excel Page Layout.
    The same issue happens when using LibreOffice calc. (Although, I never tested with Libre Office before, so I don't know that it ever worked).
    The workaround now is to create PDF for each spreadsheet one at a time, and then compile them using the Acrobat combine/binder feature. All alternatives are extremely time consuming and tedious. It used to be automatic. This is a major regression that has gone untreated for over a year now, maybe two years.
    My task takes infinitely more time to complete than it did with previous versions of Acrobat. That means that days are added to my project, when the functionality used to enable a quick pdf generation that was ready for review, now I have to do this very manual time-consuming set of steps to generate a draft. As the project has grown and more tabs are added, my pdf-generation task takes that much longer. We require lots of drafts. It used to be easy and fast. Now it is hard and time-consuming.
    In my opinion, the problem is not Excel; it is Acrobat because it was introduced with an upgrade in Acrobat, not an upgrade in Excel. The problem was introduced in Acrobat 9 or 10. Please provide a patch or add-on or something.

    If you are setting up the page numbers in Excel, the resulting PDF would display the the page numbers created in Excel. On Excel 2010 support page, (http://office.microsoft.com/en-us/excel-help/insert-and-remove-page-numbers-on-worksheets- HA010342619.aspx#BM2) is stated the following "tip" which indicates by default Excel 2010 starts numbering each tab with 1. Exel's workaround tip is below - 
    Set a different number for the starting page
    Tip   To number all of the worksheet pages in a workbook sequentially, first add page numbers to all worksheets in a workbook, and then use the following procedure to begin the page number for each worksheet with the appropriate number. For example, if your workbook contains two worksheets that with both be printed as two pages, you would use this procedure to begin the page numbering for the second worksheet with the number 3.
    On the Page Layout tab, in the Page Setup group, click the Dialog Box Launcher next to Page Setup.
    On the Page tab, in the First page number box, type the number that you want to use for the first page.
    Tip   To use the default numbering system, type Auto in the First page number box.
    Also helpful in the same section is the note on viewing page numbers. To see if the page numbering dilemma originates in Excel make sure you are using the Page Layout View see below:
    Hide All
    If you want numbers shown on pages when you print a worksheet  you can insert page numbers in the headers or footers of the worksheet pages. Page numbers that you insert are not displayed on the worksheet in Normal view — they are shown only in Page Layout view and on the printed pages.
    Overall it may be easier not to create the page numbers in Excel but instead create then in Acrobat using the Headers and Footers option in Acrobat.  I hope this helps - it sounds like a frustrating issue you are experiencing.

  • Can't select boot disk after restart from Windows 7

    I installed Windows 7 RC 7100 on the Mini a while ago and it is working now using the Apple drivers and an updated chipset driver from Nvidia... except:
    When I restart the machine from OS X and hold the Option key I get the disk selection screen and I can boot into either OS. But, when I restart the machine from Windows 7 and hold the option key I do not get the disk selection screen and the machine boots into OS X. I have also encountered issues with the Bluetooth keyboard not being recognized after restarting from Windows 7, but this does not happen consistently and seems to occur mainly when I hold down the Option key.
    Any suggestions for a fix, tweak or workaround? Thanks.

    Are you using a wired keyboard?
    Are yo saying that when you boot while depressing ALT it just tries to boot to Windows with not options or anything showing on the screen
    Try another keyboard

  • When I go to a web page power point presentation saved as Adobe the first page loads then I keep getting error message:

    I have Adobe Acrobat Pro XI
    And its up to date.
    When I go to a web page Power point presentation saved as Adobe the first page loads then I keep getting error message:
    There was a problem reading this document (14)
    I've tried refreshing the download.
    Im using IE 11
    windows 8.1
    Any ideas how to fix this?

    [moving discussion to Creating, Editing & Exporting PDFs forum]

  • HT2178 No sound from Doom3 after installed from the App store onto my intel iMac

    No sound from Doom3 after installed from the App store onto my intel iMac 10.7.3  Any solutions?

    Just just launch the Mac App Store, select the "Purchased" tab and download MainStage or any other application you already bought.

  • Help with using photos for web

    I would like to use some photos I have stored in iphoto library, but I need to reduce them. Reading the help guide, it is indicate to export to web page. But in that case it opens automatically a new web page. How can I export to a page that I have already created?
    Moreover what I do not understand is how can I reduce the dimension of the photo without changing the quality? This can be done in iphoto with export?
    I am a little bit confused...
    thanks for help

    Yep you have answered your own question.
    Choose export, file export and click the scale images option, and original options (assuming they are already jpegs).
    (As you say exporting as webpage creates the page for you but can create images in two sizes (thumnails and main) which can be helpful. The downside the that the filenames for the images as numeric. 1.jpg, 2.jpg etc.)
    While a longer process and with no direct control over file size and quality I prefer the file export option as above. It preserves filenames and quality is fine.
    and do choose 'original' as you should avoid re-saving a jpeg as a jpeg (that causes a quality reduction)
    You will need to manually bring the images into your web pages (save the exported images into your site folder and bring each one into your page individually) unless you are very clever with filenaming!
    Hope this helps.
    M.

  • Opening a web page in a new tab appear web page from the history

    When I like to open a web page in a new tab, is opening a BLANK page and in the new tab's address bar appear a random web page address from history .

    Try performing a clean reinstall.
    Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    #*'''Mac:''' Delete Firefox from the Applications folder.
    #*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    Please report back to see if this helped you!
    Thanks,
    cyborg4

  • Help with using multiple hard drives

    Is there a way to install the OS on an "external" (expresscard SSD) drive, but have all of the library and data files on the primary hard disk? I LOVE the speed on my SSD, but it's a pain finding stuff now. Is this something a RAID configuration could help with?

    mwmmartin wrote:
    I have a 1 TB hard drive; but I have a 500GB and 250GB usb external hard drives.
    Wouldn't it be cool if I could make the two external hard drives a RAID drive and use Time Machine to use all the 750GB of external memory to do my backups???
    You can, but I would +*strongly recommend against+* it. See +Concatenated RAID+ in the Help for Disk Utility.
    There are several potential problems:
    Depending on how much data is on your 1 TB drive, 750 GB may not be enough to back it up. See #1 in Time Machine - Frequently Asked Questions (or use the link in *User Tips* at the top of this forum).
    To set up a +Concatenated RAID+ set, both drives will be erased.
    When (not if) either drive fails, you'll lose all the data on both.
    Both drives must be connected any time you do a backup or want to browse your backups.
    Especially with USB, if one drive wakes from sleep, or spins up, quickly enough, but the other one doesn't, the backup may fail and/or your backups may be corrupted.
    For now, it looks like my only solution is to go buy a bigger external hard drive and spend more money,,,
    That's your best solution +*by far.+* Anything else is taking a large risk with your backups.

  • Help with using an external USB hard drive to start up a powerbook?!

    Hello ppl of the apple support communities,
    My uncle recently gave me an Apple Powerbook G4 with a bad internal hard drive and the Mac OS X installation disk that came with the machine! In my country Greece to repair this powerbook costs about 140$ that i dont have! I need your help! I connected the external USB disk to 2 USB ports,and started the Mac OS X 9.2 installation! I went to Utilities Menu checked the disk erase tab and at Volume Format i used ''Mac OS Extended(journaled)'' and checked the box ''Install Mac OS 9 Driver'' and then click Erase. However the box for the ''Install MAc OS 9 disk drivers remained checked.(Seems like they cant be installed!)Then when i go to the partition tab ad at ''Options...'' i cant find this GUID thing and i can only choose between ''Apple Partition Scheme'' and ''PC Partition Scheme''!!

    GUID partition scheme is required for Intel-based systems. The Powerbook would use the Apple partition scheme.
    While it's probably what was provided with the Powerbook, I wouldn't bother with OS X 9.2. If you plan to use it to connect to the internet, there are so many advances that have taken place since 9.2, especially in handling web sites and security. And some web sites rely on newer versions of plug-ins, like Flash, to name one. You should also expect that watching online video's will be difficult, as even the last Powerbooks have difficulties with some video's. 
    Good luck with your project!

  • How to include non web pages to the "Create PDF from Web Page" feature?

    In Acrobat Pro (v. 10), when I use the "Create PDF from Web Page" feature, it works great for html pages, but it skips non-html links (doc, pdf, ppt, xls, etc). I need Acrobat Pro to convert those files and put them in the order as well. I don't see an option for this in settings. Is there ANY way I can do this? This is for an archiving purpose and I have 10,000 plus files to convert. Please help.

    This is a question i'm trying to answer too. My issue is that I have a PDF file which itself contains links to both DOC and PDF files. The end result is that I need one consolidated PDF containing all the linked files (in order).
    I can run the "create from web page" on this PDF file, and it'll download them, but not convert them. It just adds them as "jumbled" text to the end of the document. I need it to download, convert, and then append them.
    So, as isunshine3 asked above, any way to have Adobe convert the files that it finds linked when running the "create from web page"?
    THanks
    Matt

  • Need help with fitting text onto page

    I'm working on a website where I have a template with an
    editable region where I put all the main text for each page. I
    originally had it set up for scroll bars so when the text inside
    the cell of the editable region didn't fit, scroll bars would
    appear (I used overflow in the CSS). Now the client tells me they
    don't want scroll bars but want the text area to dynamically expand
    vertically to fit whatever amount of text. The problem is, when I
    try to put in a lot of text in the editable region, it breaks the
    table and the nav bar on the side gets all messed up. How can I
    have the text inside of a cell dynamically expand without affecting
    the rest of the table?
    Any help is greatly greatly appreciated, thanks in
    advance!

    > Here's the code...
    sorry, but again- please upload the page someplace.
    Don't attach it to a post, don't paste it in a post, upload
    the page
    someplace pls.
    I and many others are viewing this forum with a newsreader,
    not using the
    web forums at the adobe web page.
    The webforum-->NNTP newsgroup thingee has truncated your
    post. So i can't
    copy/paste it and use tools and sight read it. The code i see
    is incomplete.
    your post ends here for me:
    Advanced course (9-4) &#8212; $450<br>
    This course is for students already u
    Just upload the thing to some ftp account someplace pls.
    or if not possible, zip or rar the folder and send as an
    attachment to
    blu
    at
    formdude
    dot
    com
    pls don't email anything over 10megs.
    Alan
    Adobe Community Expert, dreamweaver
    http://www.adobe.com/communities/experts/

  • Sending Web Pages via Safari - no cooperation from Yahoo

    I recently switched from Entourage to Mail. One reason was the ability to send a web page via Mail.
    As a trial, I e-mailed a web page to my Yahoo account. When I viewed the e-mail in Yahoo via Safari, all the images had "?". When I viewed the same e-mail in Yahoo via Firefox (using the new Yahoo Beta Plus), the images rendered correctly, however, the page rendered poorly (background missing).
    Of course, the web page renders correctly when viewed via the Mail program.
    I'd like to hear others experiences with E-mailing a web page. Is this a problem on Yahoo end, or on the web page?
    thanks

    I just asked my daughter about some I had sent her. My Q,and her A was:
    Q When I send a full web page in a message, as I did the one about (referenced one recent), does Yahoo fully render it?
    A Not in the version I'm using right now. There is a newer Beta version that looks a lot like Outlook -- I don't know if that is any better or not. I can't switch to the Beta version because I can't use it at work because of the way our network is set up.
    She has a paid Yahoo account, btw.
    So there is some problem, with Yahoo, that I cannot fully explore since I don't use a Yahoo account. I will test the result with my Gmail account receiving, both as seen in Safari access, and Mail access, and post back.
    Ernie

  • Help with using the WRT54G as an Access Point

    Ever since I've been using the WRT54G as an access point behind another router I have been experiencing intermittent disconnects and reconnects from the internet anywhere from once every 5 to 60 minutes.  I get the message notifcation that the Local Area Network is disconnected for a split second before everything reconnects and works fine.  This has been happening on my desktop which is wired directly to the WRT54G which itself is wired directly to the other router, but I have also experienced these disconnects with my iPhone and laptops which have been using the wireless signal. 
    When I was connected directly to the original router I hadn't experienced any of these problems.  I've also tried changing settings and even disabling the wireless broadcast of the WRT54G but to no avail.  I can't figure out what the issue is, but it seems to also be affecting the wireless broadcast of the original router. 
    I've updated firmware for the Linksys, and I've done a reset for the Linksys as well.
    Any help would be much appreciated to get rid of these disconnects.

    OK, so I've tried a different setting to see if it'll work. 
    Previously I had not configured the WAN of the Linksys router at all and left it on Auto (DHCP) even though I disabled the DHCP for the LAN.  I've now set the WAN up to a random Static IP and hopefully this will solve the problem, but I'm not sure as of yet, if anyone could look over the settings to see if they're correct please let me know.
    Router 1- (Router)
    WAN - Configured to ISP
    LAN - DHCP
    IP: 192.168.1.1
    Subnet: 255.255.255.0
    IP Range: 192.168.1.100 - 192.168.1.150
    Router 2 - Linksys (AP)
    WAN - Static IP
    IP: 64.XXX.XXX.1 (made up value)
    Subnet: 255.255.255.0
    Gateway: 64.XXX.XXX.254 (made up value)
    DNS: XX.XXX.XXX.X (made up value)
    LAN - DHCP disabled
    IP: 192.168.1.2
    Subnet: 255.255.255.252
    The WRT54G was a bit of a pain in terms of what Static IP and Gateway values they would accept, so I had to randomly put in values until I found something that worked.  So far no disconnects, but it's only been half an hour.  I can't seem to access the admin page for my Linksys router at 192.168.1.2 anymore though.

  • Help with using frames for animation

    I am using frames to animate webpage using fireworks 4 (I
    know, hopelessly outdated). I seem to have two different
    collections of frames that interact- one for the main image, and
    one for the slice I'm trying to animate as a GIF. I can't seem to
    change the time delay for each frame when I'm editing the slice.
    What can I do to make this work?

    Yep you have answered your own question.
    Choose export, file export and click the scale images option, and original options (assuming they are already jpegs).
    (As you say exporting as webpage creates the page for you but can create images in two sizes (thumnails and main) which can be helpful. The downside the that the filenames for the images as numeric. 1.jpg, 2.jpg etc.)
    While a longer process and with no direct control over file size and quality I prefer the file export option as above. It preserves filenames and quality is fine.
    and do choose 'original' as you should avoid re-saving a jpeg as a jpeg (that causes a quality reduction)
    You will need to manually bring the images into your web pages (save the exported images into your site folder and bring each one into your page individually) unless you are very clever with filenaming!
    Hope this helps.
    M.

Maybe you are looking for

  • Start Routine to populate the Logical Source System

    Hi Friends please help me with the below 1. <b>Requirement</b> : to Populate The system Date , Source System in BI for Each load request. <b> 1 Solution:</b> I thought of writing the Start Routine for this but it is giving me error syntax Error: END

  • Can multiple PCs access one remote panel at the same time?

    I've written a program in labview 7.1 to monitor/control a labview application running in the test cell through Remote Panel. I and my coworker can remotely monitor and/or control this labview application individually. But if my coworker has the remo

  • How do you restore a new hard drive from a g drive

    I recently had to replace the hard drive on my MacBook...and am now trying to restore my files from my terabyte G-Drive.  Originally, I had to connect my Time Machine with my G-Drive, but not sure how to do that now.  If you have any experience doing

  • Org structure determination in Fund Plan

    Dear Gurus !!!! While creating Fund Plan i am getting error of Sales Org Determination. I still could not understand why this error is arising here ? Further if i will define Org.Determination Rule in customization then on which Transaction Type i sh

  • What are .MXF Files?

    What are .MXF Files? I got these files along with a bunch of .XML files. do they work together or something? I'm trying to import these files to final cut pro but have had no luck and here are the error messages that I get: ERROR: No translation temp