Help with using the WRT54G as an Access Point

Ever since I've been using the WRT54G as an access point behind another router I have been experiencing intermittent disconnects and reconnects from the internet anywhere from once every 5 to 60 minutes. I get the message notifcation that the Local Area Network is disconnected for a split second before everything reconnects and works fine. This has been happening on my desktop which is wired directly to the WRT54G which itself is wired directly to the other router, but I have also experienced these disconnects with my iPhone and laptops which have been using the wireless signal.
When I was connected directly to the original router I hadn't experienced any of these problems. I've also tried changing settings and even disabling the wireless broadcast of the WRT54G but to no avail. I can't figure out what the issue is, but it seems to also be affecting the wireless broadcast of the original router.
I've updated firmware for the Linksys, and I've done a reset for the Linksys as well.
Any help would be much appreciated to get rid of these disconnects.

OK, so I've tried a different setting to see if it'll work.
Previously I had not configured the WAN of the Linksys router at all and left it on Auto (DHCP) even though I disabled the DHCP for the LAN. I've now set the WAN up to a random Static IP and hopefully this will solve the problem, but I'm not sure as of yet, if anyone could look over the settings to see if they're correct please let me know.
Router 1- (Router)
WAN - Configured to ISP
LAN - DHCP
IP: 192.168.1.1
Subnet: 255.255.255.0
IP Range: 192.168.1.100 - 192.168.1.150
Router 2 - Linksys (AP)
WAN - Static IP
IP: 64.XXX.XXX.1 (made up value)
Subnet: 255.255.255.0
Gateway: 64.XXX.XXX.254 (made up value)
DNS: XX.XXX.XXX.X (made up value)
LAN - DHCP disabled
IP: 192.168.1.2
Subnet: 255.255.255.252
The WRT54G was a bit of a pain in terms of what Static IP and Gateway values they would accept, so I had to randomly put in values until I found something that worked. So far no disconnects, but it's only been half an hour. I can't seem to access the admin page for my Linksys router at 192.168.1.2 anymore though.

Similar Messages

Help with using the pen tool

I have a few different problems with the pen tool.
1. When using the pen tool I keep finding that the shape I'm doing is slightly overlapping where I've already gone with the pen tool.
If I try and go over that area again the path I've just drawn then jumps and ruins the shape I was creating.
How can I stop this from happening?
2. Also is there a limit to the amount of paths you can create and add text to? I created two paths and typed on them fine but when I added a third path it refused to type. The cursor didn't change to show I could type and if I did click on the path line and try to type jumped to my other path and typed there. All paths were on different layers and none were overlapping, but it is 3 circles inside each other that get smaller if this makes a difference.
How can I type on the third path?
3. When I have done a path and clicked stroke it is only a thin line. How can I make this line thicker?
Thanks.

Ok, the first example would be something like this. Pretending the lines go elsewhere, say I've drawn a path with the pen tool, gone round the bottom box and that then goes round the two lines going down. So if I go down the one on the left side it hits the previous path I did, but to go up the line on the right side I'd need to go across there. But if I make a point where the two lines meet to do this it then throws the line off elsewhere.
I did have snap vector tools on but it does that without it on.
The next one I was creating a car speedometer so it has lines on the outside, dots inside of that and then, where I've done the blue circle, would be the third path where I then write the numbers in. But I can never write on that third path.
And finally, the pen tool and I think it dd have Shape Dynamics set. I've changed a couple of things and it looks a bit better now so I think that should be ok. Thanks
I know I haven't shown the panels but I haven't got any for the first as it won't go right so I deleted what I was doing. And each thing I've done is on a different layer for the speedometer, all just paths created with the circle tool with the text on.

I need help with using the Make With Top Object envelope distortion.

I'm doing a project for school called "Ocean Of Stars". I have a few objects,a sheet of purple stars and a few blue gradient colored circles. I need to merge the stars and the circles as one object, but when I click the Make with top object command, the color in the cicles disappear. I don't know what I'm doing wrong.
this is what my screen looks like now.
And this is what I need to make.
Any help is greatly appreciated!
Thanks!

His spheres are 3d yours are 2d. See what happens when you revolve a 1/2 a sphere. You will find a way to apply the stars in that same dialog box if you look really hard.

Using WRT54G as a access point.

I have two WRT54G's and have the internet connected to one of them. I am trying to use the second as an access point, but I haven't been able to figure out how to connect them. I dont have the option of running a cable. Anyone know how to get it to work?
Ben

A wrt54g wont talk to a wrt54g wirelessly.

Using Mac mini as an access point for home network

Hi
I'm looking for some help on using my mac mini as an access point on my home network.
I have a G5 tower which is wired in to my router and acts as a home server. It has all my itunes library, films, etc
I stream these to various machines in the house, one of which is a mac mini in our living room.
The mini is connected to the network via powerline adapters meaning the airport is left free.
So i set up internet sharing on the mini via airport so I can use the machine as an access point for the living room.
If I connect another machine to the mini via airport, Internet is working fine but for some reason I can't see the any other machines on the network.
All I see in the sidebar is the mini, not the server.
I've tried it on both mine and my friends macbook but had no luck.
Am I doing this the wrong way?
How would you go about doing this?
Cheers

Internet Sharing may not be providing an address via DHCP, It also may not be providing a subnet Mask that can get you to communicate with the other computers on your local Network.
Take a look at what IP addresses are being used by the various computers on the network. I would expect you have a Router that may be using 192.168.0.1 as its base "private" address, and issuing DHCP Addresses in that range and higher with a subnet mask of 255.255.255.0, meaning anything with the same three high octets can communicate freely without Router intervention.
But what addresses are bing used for the Wireless Shared computer(s)? and what subnet mask?

Use WRT110 as a wireless access point to connect desktop computer to a WRT160N network.

I am having a problem setting my WRT110 connected to a desktop computer, as an access point to a net broadcast by a WRT160N. The WRT connects to the desktop computer, but does not see the WRT169N network. A laptop with 802.11g sitting next to the desktop is able to link to the WRT160N network, although the signal is weak, but workable. Has anyone any ideas on how to use the WRT110 as as access point rather than a router. I spoke with CISCO technician level 2, and he says it can't be done. CISCO website for WRT110 describes it as three devices in one, one being a wireless access point. CISCO technician says get a WAP, but I think I should be able to use the WRT110. Help appreciated.

Linksys Wireless Routers (WRT...) are simple access points. They don't establish a connection to any other wireless device. They only allow wireless access for clients. That's the definition for an access point: to be a point of access into the LAN for clients. It is a common misconception that a "wireless access point" would always include bridging or repeating capabilities although that is a completely different mode of operation.
What you want is not an access point but a wireless repeater (WRE) or a wireless bridge (WET) or a combination. The Linksys WAPs are versatile wireless devices which can be operated as access point, repeater, and bridge.
Message Edited by gv on 09-11-2008 09:52 AM

I don't understand why i cant log in to my fb account using mozilla but with googlechrome i am able to do that.. mozilla can load up the fb site but cannot log in to my fb account.. i am comfortable with using the mozilla as my browser.. pls help thanks

i don't understand why i cant log in to my fb account using mozilla but with googlechrome i am able to do that.. mozilla can load up the fb site but cannot log in to my fb account.. i am comfortable with using the mozilla as my browser.. pls help thanks

hey thanks alot.. it helped me alot!! bring it on!!! cheers!!!

Issues with using the output redirection character with newer NXOS versions?

Has anyone seen any issues with using the output redirection character with newer NXOS versions?
Am receiving "Error 0x40870004 while copying."
Simply copying a file from bootflash to tftp is ok.
This occurs for both 3CDaemon and Tftpd32 softwares.
Have tried it on multiple switches - same issue.
Any known bugs?
thanks!
The following is an example of bad (NXOS4.1.1b) and good (SANOS3.2.1a)
MDS2# sho ver | inc system
system:    version 4.1(1b)
system image file is:    bootflash:///m9200-s2ek9-mz.4.1.1b.bin
system compile time:     10/7/2008 13:00:00 [10/11/2008 09:52:55]
MDS2# sh int br > tftp://10.73.54.194
Trying to connect to tftp server......
Connection to server Established. Copying Started.....
TFTP put operation failed:Access violation
Error 0x40870004 while copying tftp://10.73.54.194/
MDS2# copy bootflash:cpu_logfile tftp://10.73.54.194
Trying to connect to tftp server......
Connection to server Established. Copying Started.....
|
TFTP put operation was successful
MDS2#
ck-ci9216-001# sho ver | inc system
system:    version 3.2(1a)
system image file is:    bootflash:/m9200-ek9-mz.3.2.1a.bin
system compile time:     9/25/2007 18:00:00 [10/06/2007 06:46:51]
ck-ci9216-001# sh int br > tftp://10.73.54.194
Trying to connect to tftp server......
|
TFTP put operation was successful

Please check with new version of TFTPD 32 server. The error may be due to older version of TFPT server, the new version available solved this error. Files are getting uploaded with no issues.
1. Download tftpd32b.zip from:
http://tftpd32.jounin.net/tftpd32_download.html
2. Copy the tftpd32b.zip file into an empty directory and extract it.
3. Copy the file you want to transver into the directory containing tftpd32.exe.
4. Run tftpd32.exe from that directory. The "Base Directory" field should show the path to the directory containing the file you want to transfer.
At this point, the tftpserver is ready to begin serving files. As devices request files, the main tftpd32 window will log the requests.
Best Regards...

How can i plot a histogram with using the results of Line Length

PLS HELP.How can i prepare a histogram with using the results of line length code(It is somewhere in the middle).
This is a final exam take-home question. I would appreciate if you can help?
import java.awt.*;
import java.awt.event.*;
import java.io.*;
import javax.swing.*;
import java.text.*;
import java.io.File;
public class WordAnalyser extends JFrame implements ActionListener
private JMenuItem jmiAc, jmiSil, jmiCikis, jmiAnaliz, jmiHakkinda, jmiKullanim;
private JTextArea jta1, jta2;
private JFileChooser jFileChooser = new JFileChooser();
File hafizada;
File aktarilan = new File("Sonuc.txt");
// Main method
public static void main(String[] args)
WordAnalyser frame = new WordAnalyser(); /* Ana ekran olusturulur */
frame.setSize(400, 300); /* Degerleri belirlenir */
frame.setVisible(true); /* Gorunebilirligi ayarlanir */
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
public WordAnalyser()
setTitle("Serkan Ozgen Dosya Inceleme Programina Hos Geldiniz");
JMenuBar mb = new JMenuBar();
setJMenuBar(mb);
JMenu fileMenu = new JMenu("Dosya");
fileMenu.setMnemonic('F');
mb.add(fileMenu);
JMenu helpMenu = new JMenu("Degerlendirme");
helpMenu.setMnemonic('H');
mb.add(helpMenu);
JMenu kullanimMenu = new JMenu("Kullanim Kilavuzu");
mb.add(kullanimMenu);
fileMenu.add(jmiAc = new JMenuItem("Ac", 'A'));
fileMenu.add(jmiSil = new JMenuItem("Sil", 'S'));
fileMenu.add(jmiCikis = new JMenuItem("Cikis", 'C'));
helpMenu.add(jmiAnaliz = new JMenuItem("Analiz", 'D'));
helpMenu.add(jmiHakkinda = new JMenuItem("Hakkinda", 'H'));
kullanimMenu.add(jmiKullanim = new JMenuItem("Kullanim"));
getContentPane().add(new JScrollPane(jta1 = new JTextArea()), BorderLayout.CENTER);
getContentPane().add(jta2 = new JTextArea(), BorderLayout.SOUTH);
jmiAc.addActionListener(this);
jmiSil.addActionListener(this);
jmiCikis.addActionListener(this);
jmiAnaliz.addActionListener(this);
jmiHakkinda.addActionListener(this);
jmiKullanim.addActionListener(this);
public void actionPerformed(ActionEvent e)
String actionCommand = e.getActionCommand();
if (e.getSource() instanceof JMenuItem)
if ("Ac".equals(actionCommand))
Ac();
else if ("Sil".equals(actionCommand))
Sil();
else if ("Cikis".equals(actionCommand))
System.exit(0);
else if ("Analiz".equals(actionCommand))
sayim();
else if ("Hakkinda".equals(actionCommand))
JOptionPane.showMessageDialog(this,
"!!!! Bu program text analizi gerceklestirir. Her hakki saklidir SERKAN OZGEN!!!!",
"Bu program hakkinda",
JOptionPane.INFORMATION_MESSAGE);
else if ("Kullanim".equals(actionCommand))
     JOptionPane.showMessageDialog(this,
     " Ilk once dosya menusunden Ac i tiklayarak analiz etmek istediginiz Dosyayi seciniz (Lutfen uzantisi *.txt \nveya *.log olsun). Daha sonra Degerlendirme menusunden analizi tiklarsaniz dosyanizda kac adet rakam, harf, \ncumle ve kelime oldugunu gorebilirsiniz. Simdiden kolay gelsin",
     "Programin kullanim detaylari",
     JOptionPane.INFORMATION_MESSAGE);
private void Ac()
if (jFileChooser.showOpenDialog(this) == JFileChooser.APPROVE_OPTION)
hafizada = jFileChooser.getSelectedFile();
Ac(hafizada);
// Acilan Dosyayi ana ekranda gostermeye yariyan bir method
private void Ac(File file)
try
// Acilan dosyayi okuma ve ana ekranda gosterme
BufferedInputStream in = new BufferedInputStream(new FileInputStream(file));
byte[] b = new byte[in.available()];
in.read(b, 0, b.length);
jta1.append(new String(b, 0, b.length));
in.close();
catch (IOException ex)
// Temizle tusunun hangi ekranlara etki edecegini secme
private void Sil()
jta1.setText("");
jta2.setText("");
private void sayim()
int buff;
int sayac = 0;
int Cumleler = 0;
int Kelimeler = 0;
int Karakterler = 0;
int Satirlar = 0;
int Rakamlar = 0;
boolean start = true;
int linenum = 0;
try
FileInputStream instream = new FileInputStream(hafizada);
FileOutputStream outstream = new FileOutputStream(aktarilan);
     BufferedReader infile = new BufferedReader(new InputStreamReader(new FileInputStream(hafizada)));
PrintStream out = new PrintStream(outstream);
     out.println("---Kelime Avcisinin Sonuclari---");
     String line = infile.readLine();
     while (line != null){
     int len = line.length();
     linenum++;
     line = infile.readLine();
     out.println("Line Length :"     + linenum + "\t" +len);
while ((buff=instream.read()) != -1)
switch((char)buff)
case '?': case '.': case '!': /* Eger "?", "." veya "!" gorurse program cumleleri ve kelimeleri arttirir*/
if (start == false)
Cumleler++;
Kelimeler++;
start = true;
break;
case ' ': case '\t': case ',': case ';': case ':': case'\"': case'\'': /* Eger /t,;:\ ve \" bu isarteleri goruruse program kelimeleri arttirir */
if (start == false)
Kelimeler++;
start = true;
break;
          case 'n': case '\n': /* Eger \n gorurse satirlari arttirir */
          if (start == false)
               Satirlar++;
               Kelimeler++;
               start = true;
          break;
default:
if (((char)buff >= 'a' && (char)buff<='z')|| /*a-z, A-Z veya - degerlerini gorurse karakterler arttirilir */
((char)buff >= 'A' && (char)buff<='Z')||
((char)buff == '-'))
Karakterler++;
if ((Kelimeler % 50) == 49)
if (start == true)
               out.println();
out.print((Kelimeler+1) + " ");
out.print((char)buff);
start = false;
          if ((char)buff >='0' && (char)buff <='9') { /* 0-9 gorurse rakamlari arttiri */
               Rakamlar++; }
}// switch
     }//while
instream.close();
out.println();
out.println();
out.println("Karakter sayisi: " + Karakterler);
     out.println("Kelime sayisi: " + Kelimeler);
out.println("Cumle sayisi: " + Cumleler);
     out.println("Satir sayisi: "+ Satirlar);
     out.println("Rakam sayisi: "+ Rakamlar);
outstream.close();
try
BufferedInputStream in = new BufferedInputStream(new FileInputStream(aktarilan));
byte[] b = new byte[in.available()];
in.read(b, 0, b.length);
jta2.append(new String(b, 0, b.length));
in.close();
catch (IOException ex)
catch (Exception e)
System.out.println(e);
}

Why is it that you're not interested in IOExceptions?
catch (IOException ex)
} Empty catch blocks is a hallmark of foolish Java code. At least print out the stack trace.
%

Can you use a AIR-PWRINJ-FIB with a AIR-CAP3502I-A-K9 access point?

Is it possible to use a AIR-PWRINJ-FIB with an AIR-CAP3502I-A-K9 access point?

You cannot use a mouse as it defeats the point of a MacBook. You can although have a keyboard for the iPad which allows word processing and simple things like typing emails. Hope this helps

Question: Need help with overcoming the following message: "Nothing was imported.

Need help with overcoming the following message: “Nothing was imported. The file(s) or folder(s) selection to import did not contain any supported file types, or the files are already in this catalogue”.
The photos being scanned are old film shots. They have NOT been previously scanned. I am using Photoshop Elements 9 software.
QUESTION: how do I override this STOP and or circumvent the photo comparison option????
Thanks for the help. Bob K --- [email protected]

Are you scanning as jpeg, tiff or some other format?
Are you using continuous numbering for files names as by definition scanned files have no exif data.

I am having problem with using the Basic brush definition

I am having problem with using the Basic brush definition. When I try to click on it will not allow me to use it and will automatically use the 5 pt. oval brush definition. The only way I can use the basic brush is after I have already drawn something and then I have to click on the stroke and then press basic. This is incredibly annoying and if anyone could help I would greatly appreciate it. (I have Adobe CS6)

for whatever reason, the basic 'brush' you see in the brushes palette effectively means removing any brush from a path. to draw with the brush tool you need a brush defined. in your case the last one selected being the 5 pt oval one.

Lost Connection to C&C Generals Zero Hour Online using the WRT54G v5 Wireless Network

I have this problem playing Command & Conquer Generals Zero Hour online. I'm using the WRT54G v5 Wireless Network & when I'm in the game lobby, it kicks me off saying, "Lost connection to C&C Generals Zero Hour Online". This happens quite often variing on me entering & exiting rooms or other players entering & exiting rooms that I'm in. But it doesn't occur when I'm accually play a game with someone. It also does not happen at all when I'm connected directly to the internet connection so I know the network is causing it.
I've never had any problem with this game on any other wireless network types before. I've tried port forwarding with a static IP address, disabling firewalls, upgrading firmware, etc... No good. I've done some google research & found that varios other people on other forum sites have the same problem, it also occurs on another computer of mine.
Is there some kind of feature on this network that isn't on any others? One wireless network specificly that I've found that the game works on is the WRT54GS.
Any replies will be greatly appriecitated.
Message Edited by Me Myself AndPi on 02-20-2008 03:13 PM

Maybe I would if I hadn't stopped playing the game 3.5 years ago. You may want to check the date on those previous message. But here's what I remember:
Turns out nothing worked the fix the problem. Not turning of a firewall, not port forwarding, not updating fireware, nothing. There must be a jitter on the routher that triggers the game into thinking it gets disconnected.
Many other users on the forums posted the same problem with this one router too & no one ever figured out a solution. Eventually that router broke & my family bought the WRT54GS2, which worked perfectly.

Hello I need your help with installing the flash drive into my laptop

Hi
I am Rachel Friedman asking for your help with installing the flashdrive player into my laptop.
Thanks
Rachel

To give you any useful advice, I'm going to need to know more about your computer and browser:
https://forums.adobe.com/message/5249945#5249945

VPN will not connect when using the WRT54G.

I am try to connect to my office at work from home using the WRT54G wireless router. I am using the newest vpn client, and have entered all of the information to allow the connection...but it will not connect. Am I doing something wrong? Any information will be appreciated, thanks.

hmmm ,
Did ya cheked the firewalls???
tried to ping the Host side ??
able to ping or not?
exactly what problem u coping with , clarify please.
pe@c3
~~~Nobudy's Perfect , i try To Be So ! Each n every moment of maH LYF , AND I THINK dat wats make Me "Different" From others....~~~

Help with using the WRT54G as an Access Point

Similar Messages

Maybe you are looking for