Help with website display
Can someone tell me why my website, container made to 1024 width, has about 1/2 an inch missing from display that you have to sideways scroll to, on monitors set to 1024? How can I fix without redoing the whole website.
Thank you so much in advance!
Maggie
Hi Maggie,
Unfortunately we on the BrowserLab team don't have the bandwidth to help dig into and solve the HTML/CSS issues that our users find, but I hope others in the community can help you out. As a suggestion, you might try posting your question in the Dreamweaver forum ( http://forums.adobe.com/community/dreamweaver/dreamweaver_general ) or other forums here or elsewhere online as well. Also, if your page is public, post the URL so others can look at the code directly.
Best of luck,
Mark
Similar Messages
-
Hi, I need help with Dreamweaver CS4. I don't know HTML which
is why I am using this program. I am using the AP Div (Not the
Insert Div Tag) Icon at the top in the Standard Layout tab accessed
by the icon at the top of the panel in the classic layout mode.
Here is my problem. I am trying to make sure the text and
spacing is the same as much as possible from browser to browser.
The spacing between the lines (leading) is different. Sometimes the
text jumps out of the box or text lines get cut off and looks
jumbled. My pages are layed out with a bunch of AP divs so I can
place them wherever I want. For example I draw one AP div (which
has the square box in at the left top) and then another one below.
Even though they are not touching, the browser displays them
overlapping with the text clashing. Or sometimes text just runs
wild. I've tried to use tables but they are too limiting and I am
not being able to place them freely. Is that because browsers do
not recognize CSS? How do I get at least a decent consistency
between browsers? What am I doing wrong?As well as the links below - another way to learn (including
anyone else's bad habits) is to find a page you like, and then tell
your web browser to show you the code view for the page and/or do a
"Save As" and save the page to your computer to then copy &
paste code segments into your file (in IE click View at the top,
select Source from the options)
HTML and/or DW Tutorials, and other information links that I
have saved
http://validator.w3.org/
http://www.visibone.com/
http://www.w3schools.com/
http://www.hotscripts.com/
http://www.projectseven.com/
http://www.adobe.com/devnet/
http://www.scriptarchive.com/
http://www.htmldog.com/guides/
http://www.htmlcodetutorial.com/
http://alistapart.com/topics/code
http://www.how-to-build-websites.com/
http://css.maxdesign.com.au/floatutorial/
Download User Guide as PDF for easy search
http://www.adobe.com/support/documentation
http://www.ianr.unl.edu/internet/mailto.html
http://lynda.com/ Hours of videos.
(must pay)
http://apptools.com/examples/pagelayout101.php
http://www.thesitewizard.com/archive/css.shtml
http://www.projectseven.com/tutorials/index.htm
If not PDF (link above) an online guide to read
http://livedocs.adobe.com/en_US/Dreamweaver/9.0/
Customizing the layouts that come with CS3 (VIDEO)
http://www.adobe.com/designcenter/video_workshop/?id=vid0155
FormMail
http://www.bebosoft.com/products/formstogo/index.php
For those using MySQL - Installing PHP and MySQL on Windows
XP
http://www.webassist.com/professional/products/solutionrecipes.asp
Community MX lessons
http://www.communitymx.com/abstract.cfm?cid=3D074
http://www.adobe.com/cfusion/designcenter/search.cfm?product=Dreamweaver&go=Go -
Help with CRT display...
Hi all...
I'm facing a nasty problem connecting an external crt display to my MacBook Pro.
First here's the setup:
-Two MacBook Pro 2.4 GHz
-G4 Cube 450MHz
-iBook G3 800MHz
-CRT DPRO750SB 17" (Nec-Mitsubishi)
-CRT AT897D-1 17" (Formac)
-Problem:
I used to connect the DPRO750SB to one MBP with the Apple's DVI/VGA adapter and everything was fine but now the display doesn't light up anymore.
Furthermore, trying to boot with the display hooked up make the computer crash during startup.
-Clues:
The display and its VGA cable seems OK since there is no problem with the G4 Cube (VGA to VGA) nor the iBook (mini-DVI/VGA).
I have no problem using the Formac Display with both MBP (DVI/VGA).
The DPRO750SB icc profile don't show up anymore in the "Displays" Preference Pane.
I'm able to get the DPRO working sometimes by plug the Formac in, unplug it, then plug the DPRO in.
(in this case, the "Displays" Pref Pane says it's the Formac).
I'm really lost now...
Any help would be greatly appreciated...
Thanks
FabriceWell BF1942 and 3D mark both run fine, stable, no glitches and run at the size they are supposed to. Does anyone have any suggestions? PLEASE HELP!
twanto -
Quick help with css display in IE7
Hi, I haven't been on this forum in ages - I have a slight display glitch would love some help with:
http://magma.ie/magmablog-html/index.html
It looks great in the latest and greatest browser (IMHO!): - firefox 3.5.6
http://cl.ly/17cD
but IE7 pops the search field in the sidebar off to the right, at least, according to browsershots.org
http://cl.ly/1A1f
Thanks, HIt looks OK in IE8 but IE7 is having trouble with the #Sidebar width.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com -
Need Help with Address Display
I need help with APEX.
Here's my situation:
I have a report that displays brief employee information. Among the information displayed is the Address. Right now, it's display as:
Mr X
Employee Id
Accounting Department
Address 1
Mr X
Employee Id
Accounting Department
Address 2
I would like it to display
Mr X
Employee Id
Accounting Department
Address 1
Address 2
1) I have thought of using the Break functionality; however, the function only allows break at column 1, 2, 3. As you can see Address starts at column 4. Also, Address has a few columns; Address Line 1, Address Line 2, City, State, Zipcode.
2) Stragg functions - I'm not sure how to implement it since it has more than 1 columns.
Any ideas?
Thanks in advance
AndrewThe example I gave you, using analytic functions is a simple one.
Now, you are saying:
1. some of the employees may have two adresses?
2. if this is the case, your employee appears in the report twice?
3. you don't want his name, employee id and accounting department to appear twice?
4. only his address has to be displayed?
If the answer to all the questions is yes, this kind of query will help you. I repeat:
SELECT CASE
WHEN LAG (employee_id) OVER (ORDER BY employee_id) =
employee_id
THEN NULL
ELSE employee_name
END employee_name,
CASE
WHEN LAG (employee_id) OVER (ORDER BY employee_id) =
employee_id
THEN NULL
ELSE employee_id
END employee_id,
CASE
WHEN LAG (employee_id) OVER (ORDER BY employee_id) =
employee_id
THEN NULL
ELSE accounting_department
END accounting_department,
street, postal_code, city, state, country
FROM your_employees_table;Give it a try.
Denes Kubicek -
Help with XML, display data on swipe/click
Hello.
I am trying to create a moibile app that displays XML data. It's basically a phone book. I want the data to change when swiped. I can get the data in just fine. I can get it to display fine. I am not seeing the correct image first, however. I think it's a problem with my imagenum variable.
Then, I want to change what is displayed when the user clicks/swipes on the screen. How do I do that?
stop();
var nameArray:Array = new Array();
var countryArray:Array = new Array();
var portraitArray:Array = new Array();
var flagArray:Array = new Array();
var jobtitleArray:Array = new Array();
var imageNum:Number=0;
var totalImages:Number;
//Load XML
var XMLURLLoader:URLLoader = new URLLoader();
XMLURLLoader.load(new URLRequest("recbook.xml"));
XMLURLLoader.addEventListener(Event.COMPLETE, processXML);
function processXML(event:Event):void {
var theXMLData:XML = new XML(XMLURLLoader.data);
totalImages=theXMLData.name.length();
for (var i:Number =0; i < totalImages; i++){
//push xml data into the arrays
nameArray.push(theXMLData.name[i]);
countryArray.push(theXMLData.country[i]);
portraitArray.push(theXMLData.portrait[i]);
flagArray.push(theXMLData.flag[i]);
jobtitleArray.push(theXMLData.jobtitle[i]);
//data is processed
loadData();
function loadData():void {
var thisPortrait:String = portraitArray[imageNum];
var thisCountry:String = countryArray[imageNum];
var thisName:String = nameArray[imageNum];
var thisJobtitle:String = jobtitleArray[imageNum];
var thisFlag:String = flagArray[imageNum];
var dataLoader:Loader = new Loader();
dataLoader.load(new URLRequest(portraitArray[imageNum]));
dataLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, dataLoaded);
function dataLoaded(event:Event):void {
//I want to start with image 0 (img1.jpg) and cycle through with a mouse click (finger swipe on iOS)
stage.addEventListener(MouseEvent.CLICK, loadMainImage1);
function loadMainImage1(event:MouseEvent):void {
portraitUILoader.source=thisPortrait;
flagUILoader.source=thisFlag;
selectedName.text=thisName;
selectedCountry.text=thisCountry;
selectedJobtitle.text=thisJobtitle;
//add to imageNum (1);
imageNum++;
if (imageNum < totalImages) {//stopping at img2
trace("imageNum " + imageNum);
trace("image name (thisPortrait) " + thisPortrait);//losing image 4 somewhere
loadData();
trace("Total Images " + totalImages);
//click to move past the home screenI'd like to ditch this. don't know how.
homeScreen_mc.addEventListener(MouseEvent.CLICK, goNext);
function goNext(event:MouseEvent):void
nextFrame();
*/here's the output:
imageNum 1
image name (thisPortrait) images/img1.jpg
imageNum 2
image name (thisPortrait) images/img2.jpg
imageNum 3
image name (thisPortrait) images/img3.jpg
Total Images 4
Total Images 4
Total Images 4
Total Images 4
It starts the display on image 1 (the second in the series img2.jpg)*/Thank you.
That helped. I get the correct images in the output, but not in the display. I also get the following error. Any chance you could help with that?
new output after moving the increment:
imageNum 0
image name (thisPortrait) images/img1.jpg
imageNum 1
image name (thisPortrait) images/img2.jpg
imageNum 2
image name (thisPortrait) images/img3.jpg
imageNum 3
image name (thisPortrait) images/img4.jpg
TypeError: Error #2007: Parameter url must be non-null.
at flash.display::Loader/_load()
at flash.display::Loader/load()
at iOS_fla::MainTimeline/loadData()
at iOS_fla::MainTimeline/loadData()
at iOS_fla::MainTimeline/loadData()
at iOS_fla::MainTimeline/loadData()
at iOS_fla::MainTimeline/loadData()
at iOS_fla::MainTimeline/processXML()
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at flash.net::URLLoader/onComplete() -
Help with Conditional Display and Validation
Version 4.1.1.00.23
Hello,
I'm having a difficult time with a conditional display and validation I'm hoping someone can help with.
Requirements:
When the Start Date (Datepicker) and/or End Date (Datepicker) change then display the Change Reason (Select List) and Change Description (Textbox)
If the page is saved without entering a Change Reason display a validation error message that the Change Reason cannot be empty (NULL)
What I've tried
Create a Dynamic Action on the Start Date
Event: Change
Selection Type:Item(s)
Items(s): P51_START_DATE
Condition: none
True Action Section:
Action: Show
Fire on Page Load: Checked
Show all page items on the same line: No
Affected Items Section:
Selection Type:Item(s)
Item(s): P51_CHANGE_REASON,P51_CHANGE_DESC
I've also created a Dynamic Action with similar settings for the P51_END_DATE.
I created a Validation for the P51_CHANGE_REASON as Function Returning Error Text:
DECLARE
v_start_date work_items.start_date%TYPE;
v_end_date work_items.end_date%TYPE;
BEGIN
SELECT start_date
,end_date
INTO v_start_date
,v_end_date
FROM work_items
WHERE work_items_id = :P51_WORK_ITEMS_ID;
IF ( (v_start_date != TO_DATE(:P51_START_DATE,'DD-MON-YYYY') OR v_end_date != TO_DATE(:P51_END_DATE,'DD-MON-YYYY') ) AND
:P51_CHANGE_REASON IS NULL ) THEN
RETURN 'Change Reason must have a value';
END IF;
END;
The Issue
I tried to create another Dynamic Action to hide the P51_CHANGE_REASON and P51_CHANGE_DESC fields on page load, but when either of the date fields are changed and the validation is fired the P51_CHANGE_REASON and P51_CHANGE_DESC are hidden again.
There are two buttons to submit the page: 'SAVE' will submit the page and stay on the page and 'SAVE_CHANGES' will submit the page and branch to the previous page (which is a report with EDIT buttons to edit the record).
I can't get the page load Dynamic Action to NOT fire when the validation is fired.
I hope this is clear and if not what information can I provide?
Thanks,
JoePhil,
Thank you for looking at this.
Yes if the Change Reason is NULL when the edit page is displayed then the Change Reason and Change Description fields are hidden. If the Start Date (Datepicker) and/or End Date (Datepicker) change then display the Change Reason (Select List) and Change Description (Textbox). If the page is saved without entering a Change Reason display a validation error message that the Change Reason cannot be empty (NULL).
The problem I'm having is that if no Change Reason is entered and the page is saved thereby firing the validation the Change Reason and Change Description fields are hidden again (because of the On-Load Dynamic Action to hide them). So now the user can't put in a Change Reason...unless they change one of the date fields again which isn't going to be accepted.
Is there a way to determine if a validation error was fired and be able to use that on the On-Load Dynamic Action to hide the two fields? Something like...If the validation fired then don't run?
Please let me know if I'm still confusing you.
Thanks,
Joe -
Help with video display!!
Hello all,
After installing the 41.09 drivers for my MSI GF4200 64mb card, I noticed that upon DVD or any video file playback, I only see about one quarter of the video, which is the upper right hand corner. I do not know if the problem started with the installation of this driver as I have not tried to view video in awhile until after installing this driver. Previously I believe I had 4072 and the original drivers in. So, I reinstalled the original drivers and I am still having the same problem. I ran my direct x diag tool and I passed all of them.
Another strange part of this is the fact that after I play with the display settings, the problem seems to be fixed. But when I close the program, and reopen the video file the problem recoccurs again.
I do not have any other video problems that I know of, but I will go run Battlefield 1942 (intense gfx) to see how I fare. If anyone has any suggestions or ideas, please share as this is really starting to bug me. Thanks for your help in advance!
twantoWell BF1942 and 3D mark both run fine, stable, no glitches and run at the size they are supposed to. Does anyone have any suggestions? PLEASE HELP!
twanto -
Search Help with Structure Display
Hi,
I want to create a search help which should display my output in the structure format base on the different levels.
I have already written a test program which display all the values in proper structure format. But I wanna do the same in the search help. It has to display the output in the structure format.
Please guide me how to achieve this.
Thanks,
Karthikhello,
you could write additional report based on ALV tree. So you would have the stucture which you want to have and on value request call your custom program. i doubt that there is FM or class which could generate search help tree. So basically you have to write your own logic. Or you could use GuiXt tool. Example and tutorial.
http://www.synactive.com/tutor_e/lessonco00.html
br,
dez_ -
Just installed Lion and afterward I noticed that things work differently with external displays. In the past I could have my laptop open to mirror but now it must be shut and the mirrior button or selection isn't available within the display preferences. So my question is, 1. does any one know how to better manage displays? and 2. does anyone know how to mirror while having the laptop screen open?
I know trhis sounds petty but where I work it is very hot and it seems like with the screen shut the computer syncs heat away a lot less efficiently.
ThanksThanks,
I now know how to turn on and off mirrioring with command/F1 (didn't know that yet), but would you know how I can use my external display in mirror mode with the laptop display completely turned off, not dimmed till black, but off?
Before lion I was able to do this by shutting the laptop screen which would put the machine into sleep mode and then by clicking the mouse or hitting a key on the keyboard it would wake it. Once the external display came on then I would open the laptop and the laptop display would remain off while using the external display. Hope that makes sense. Any suggestions? -
Newbie Needs Help With Website
I am new to Dreamweaver and am undertaking the task of building my church website. I have placed the images in tables on and centered. I have also set the table width to 60% so that it will display properly in different resolutions. However the links I have created on the left move over the images when the screen size is reduced. My question is what do I need to do with the links to keep them locked in place when the screen size is reduced.
Any help is greatly appreciated. Below is the code that is used for the links
The website that I am working at is: http://www.friedlandmoravian.org
<div id="apDiv2">
<div align="center">
<p>
<script type="text/javascript">
AC_FL_RunContent( 'codebase','http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=5,0,0,0','widt h','79','height','25','src','text1','quality','high','pluginspage','http://www.adobe.com/s hockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash','bgcolor','#44352A','movie' ,'text1' ); //end AC code
</script>
<noscript>
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=5,0,0,0" width="79" height="25">
<param name="movie" value="text1.swf" />
<param name="quality" value="high" />
<param name="bgcolor" value="#44352A" />
<embed src="text1.swf" quality="high" pluginspage="http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash" type="application/x-shockwave-flash" width="79" height="25" bgcolor="#44352A"></embed>
</object>
</noscript>
</p>
<p>
<script type="text/javascript">
AC_FL_RunContent( 'codebase','http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=5,0,0,0','widt h','113','height','26','src','text2','quality','high','pluginspage','http://www.adobe.com/ shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash','bgcolor','#44352A','movie ','text2' ); //end AC code
</script>
<noscript>
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=5,0,0,0" width="113" height="26">
<param name="movie" value="text2.swf" />
<param name="quality" value="high" />
<param name="bgcolor" value="#44352A" />
<embed src="text2.swf" quality="high" pluginspage="http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash" type="application/x-shockwave-flash" width="113" height="26" bgcolor="#44352A"></embed>
</object>
</noscript>
</p>
<p> </p>
<p>
<script type="text/javascript">
AC_FL_RunContent( 'codebase','http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=5,0,0,0','widt h','106','height','25','src','text3','quality','high','pluginspage','http://www.adobe.com/ shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash','bgcolor','#44352A','movie ','text3' ); //end AC code
</script>
<noscript>
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=5,0,0,0" width="106" height="25">
<param name="movie" value="text3.swf" />
<param name="quality" value="high" />
<param name="bgcolor" value="#44352A" />
<embed src="text3.swf" quality="high" pluginspage="http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash" type="application/x-shockwave-flash" width="106" height="25" bgcolor="#44352A"></embed>
</object>
</noscript>
</p>
<p> </p>
</div>
</div>I can't see any tables being used on the entry page.. all you are using is absolutely positioned divs. Not sure why you are using AP divs, are you?
Unless you understand how these work, you will be in a lot of bother, one of them being the exact problem you mention.... read this article before doing anything else:
http://apptools.com/examples/pagelayout101.php
That layout can be quite easily achieved by a beginner using a table layout - one for header, a nested table layout for the left and right columns and then another for the footer area.
Also a simple css layout would work, but you'd again need to understand css positioning.
The page took a heck of a long time to load and its because all you've used is images.... type your url into the box at this site and you'll see that the image sizes are just too big, causing the slow load times.
http://analyze.websiteoptimization.com/wso
Had a look at one of the inner pages (history) and again you are using an image for the text area - why would you do that...
Firstly, it would cause a speed issue and more importantly would cause you problems if you wanted the page spidered by the search engines... no text on a page and the SEs won't find you.
Sorry to say this, but I'd start over, but before you do, please read up on how to create a page (using either tables or css) that isn't as fragile as the one you have and that will be consistent across different browsers.
Here are some links to help you get started:
http://www.w3schools.com/
http://www.macromedia.com/devnet/mx/dreamweaver/css.html
http://www.macromedia.com/devnet/dreamweaver/articles/tableless_layout_dw8.html
http://www.macromedia.com/devnet/dreamweaver/articles/css_concepts.html
The last one on the list may suit you to start with, as it takes a FWs comp and shows you how to build the site in Dreamweaver.
http://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt1.html
Hope some of this helps :-) -
Guys
Am sorry if i posted my following request in the wrong place.
I am doing a website as a part of my project. It is supposed to showcase my dissertation. I was wondering if some one could tell me how to replicate the apple table which displays "store, mac etc etc above".
Can some body post the table format or something !
thxI think hunter is just interested in how to do an image flip roll-over above an image map.
Here is the nuts and bolts:
http://www.htmlgoodies.com/tutorials/image_maps/article.php/3479771
But unless you are pretty handy with code you would be better off using a web creation tool such as Dreamweaver. With that you get some nifty easy to use tools where mere mortals can succeed in building what you are looking to do.
Hope this helps you.
Best of luck on your presentation. -
Dual Display - help with Cinema Display for MacBook Pro where MB won't detect displays.
I just got a Cinema Display (a1081 20") ("CD") off eBay to use as a dual screen with my Macbook Pro OS X 10.6.8 ("MB"). However, I can't get MB to recognize CD! I've tried power cycling both the MB and the CD with and without USB cord connected. MB won't recognize CD display in any situation. However, it is recognized in some capacity although I can't use dual display because the CD power button triggers MB to ask me if I want to restart, shutdown, or cancel.
Any help is appreciated!!Have you tried smc and pram resets?
Try Detect Displays in the Displays preference pane.
Does the Displays preference pane Arrangement show two screens? If so do click gather windows and check the resolution setting of the new screen. -
Please help with a display problem.
I plugged in an external projector. It is now disconnected but I can't get the screen to return to normal. Help please.
1. Attempt to put the system to sleep and wake it back up and see if that doesn't correct the issue
(Command + Option+ Eject)
2. If that doesn't work Click on the in the upper left hand corner of the display and go to system preferences and check your display settings there.
3. If that doesn't work attempt to restart the machine with the projector not connected
I hope this helps!
GL! -
Need help with Firefox display issue on one page of site
I have a page that W3C validates, displays properly in IE and Netscape, but does not display properly in Firefox. The issue is with a style class applied to the inner centered table. class= "vert_table" This class works on all of the other pages in the site, but not in this one.
The page:
http://www.redshift.com/~lorac/sdy-46-49.html
The issue:
< table class="vert_table" width="760" border="0" cellspacing="0" cellpadding="0" align="center" bgcolor="#f1ebe8" >
The vertical rule does not display, and further down the page a dark left-right border appears starting with this text.
my mother, when I was wasting my life away not knowing who I was,
and ends with:
Mojin: (hugging him) I don't expect you to love me. I just want you to live, that's all.
I have been looking through this code for two days, searching for any offending omission in code or redundancy that would break the page. I've searched for missing div tags but none are apparent to me. I'm hoping someone with fresh eyes can spot it right away.
It's odd that the page validates but Firefox cannot display it properly.
Sample page of code working properly:
http://www.redshift.com/~lorac/sdy-41-45.html
Any help is appreciated.Hi Jim, thanks for the reply. Your suggestions sound interesting but I'd like to figure out why this particular page doesn't work when all of the others do. I'm sure it's just a little code thing that I'm overlooking.
I could revert back to a saved page, but I updated text and images on this page before the verticle border broke, so I don't want to lose those edits. And that is why I'd like to fix this one instead of redesigning the page.
BTW, I forgot to mention in my first post, GoLive CS, W2K.
Maybe you are looking for
-
Premiere cs6 Mac OS 10.6.8 crashes
Quad Core Xeon 2.66 with 5gb Ram. Frequent, regular crashes - particularly if trying to run "denoiser" or when trying to ripple insert clips. "Serious Error" message and need to close project and re-open. Fairly simple project - not graphic or animat
-
Why is the spreadsheet empty when users download to Excel from ALV grid?
Users are seeing SAP GUI transaction results display in the ALV Grid when running an SAP Report; however, when they click the Download to Excel icon the spreadsheet is empty. When they use List...Export...Spreadsheet, the spreadsheet is filled. This
-
How can I check and change the system set events trace level?
Dear all: How can I check the system set events trace level? I don't want the alert_log so big. Regards Terry
-
[XI 3.1] Publications with Personalization (Profiles) - Document name
Hi, We have a question with regard to Publications with Web Intelligence reports in XI 3.1. We would like to know if it's possible to put the "profile value" (or something equivalent) in the name of the output document? For example, we want to delive
-
I need forgot my answer your security questions
i deposit 25$ egift itunes walmart store ! i buy gems of game not complete . need answer ! i need forgot my answer your security questions please !