Here's a different one for you...

I have an original iphone which i have had very little, if any problems. I updated to the 2.0.2 software that came out recently and everything was once again going fine. Here's where it gets interesting.
Two days ago, the bottom row of icons (phone, mail, safari, ipod) stopped responding. All of the other icons on both screen pages work fine. The "slide to unlock" works fine. I have noticed when I go to settings, the bottom icon doesn't respond in any screen either. Luckily, I can still use the phone through contacts and can still receive calls, but with no luck using the "end call" button.
I've read several of the posts in these discussions and have tried the reset, hard reset, restore, reinstall of 2.0.2. I know I'm not crazy, these icons don't work! Anyone out there ever had this happen or have any suggestions?

I would suggest an appointment at the Genius Bar and see what they can do for you.

Similar Messages

Here's a tough one for you.....

Does anyone have knowledge of whether or not it is possible to start a LabVIEW program (run when opened), bring it to the front and display it full screen, and then shutdown certain windows components behind it such as explorer, and ther various services, so that it remains running the VI but opens up as much system resources for LabVIEW as possible?
I would like to start a VI and isolate it from the rest of the windows environment if possible (obviously not things like max, etc. though).
Thanks,
Jonathan

You could try making your VI the shell application, but I'm not sure whether it will completely take over window, or just replace explorer (probably the latter).
You could also try some of Ben's suggestions here for improving performance.
Try to take over the world!

Here's a new one for you

Been having nothing but problems with idvd 08 in the past couple of days. The old won't open problem. Did the usual suggested fixes including a new user account. Also did "Old Toad's" preference fix. Can now open idvd but when I go to an existing project and open it, I get the first page menus and nothing else so try to reload the movie into the project and it kicks it back out(??).
Do I need to re-install idvd 08 and if so, what prefs etc do I delete?
Also one other question . . . if I have a project that exceeds the 4.2 capacity, can I burn it on a dual layer using the dual layer setting to accommodate the size of the file?
thanks in advance for any input

so try to reload the movie into the project and it kicks it back out(??).
Check to see if the movie you wish to import is supported by iDVD. This is from Help:
_Video and image formats that work with iDVD_
You can use these movie and graphic formats in iDVD:
◼
Most video or image files supported by QuickTime (see the list of unsupported QuickTime formats below)
◼
16:9 widescreen formats
◼
AAC, MP3, and AIFF audio files
◼
Any format from iMovie: DV, high-definition video (HDV), MPEG-2 SD, MPEG-2 SD, MPEG-4 SD, MPEG-4 HD, and AVCHD
High definition video is converted to work with the format of your project. iDVD supports using 16:9 widescreen video; therefore, when your DVD plays on a DVD player that supports widescreen format, the footage appears in its original aspect ratio.
The following video and image formats are not supported in iDVD:
◼
Copyrighted or protected videos.
◼
Movies saved in thousands of colors using the “none” compression setting in iMovie.
◼
48-bit color images (16 bits per color). To use source files in one of these formats in iDVD, save them in a supported format.
◼
Aurora uncompressed files. For best results, export Aurora clips as DV-format video before importing them into iDVD.
◼
QuickTime VR, MPEG-1 or MPEG-2, Flash, streaming or encrypted movies, or QuickTime spanned movies. You can’t add MPEG-1 or MPEG-2 files to an iDVD project because they don’t contain standard video tracks.
◼
QuickTime Fast Start movies. (Fast Start movies are intended for Internet playback.) When saving a QuickTime movie for use with iDVD, click the Options button in the QuickTime Export dialog and make sure that the “Prepare for Internet Streaming” checkbox is not selected.

Ok here is a good one for you all

So here is the problem.
We use PPTP VPN for our Exe's at my company and most of them are using airbooks or power books now.
They also use the ATT USB Mercury/ATT USB lighting cards for in emergency no network connection while traveling.
10.5 - all works great no issues ... ATT cards VPN no issues
10.6 - ATT cards work fine to get to the internet but as soon as you fire up the vpn connection and get connected to the vpn all traffic stops no internet and no intranet access. ( we send all traffic over the PPTP connections )
Both are connected and with out errors .. sometimes if you wait 30 minutes it all starts working , disconnect and re try nada.
I have upgraded firmware in the ATT cards , using the new 3Gwatcher application provided by sierra wireless and still nothing.
The PPTP works fine form home wireless , hotels , hot-spots seems to be related to the att cards form all the troubleshooting I am doing
Anyone have any thoughts - i did send a support ticket into sierra for some help to but I figured maybe you guys have seen this and no a fix or solution

I have no expertise with VPN, but here are some links that may help you. Two of them are related to Cisco VPN which may or may not be relevant to you, but you did not mention whether you were using Cisco VPN.
Mac OS X 10.6 (Snow Leopard) Built-in VPN Setup » Information Technology
HDC >> Cisco VPN for Mac OS X 10.6
Fix Cisco VPN in 10.6

What do I do if I have one Apple ID for my phone and a different one for my mac. I have tried to sync garageband to my mac from my phone but it won't connect. Is it because of the different ID's? If so what can I do to fix it?

What do I do if I have one Apple ID for my phone and a different one for my mac. I have tried to sync garageband to my mac from my phone but it won't connect. Is it because of the different ID's? If so what can I do to fix it?

You can use one account with iTunes on your Mac, and different account(s) with the Mac App Store (for buying/downloads apps or OS updates for your Mac), iCloud (System Preferences > iCloud) and Messages (Messages > Preferences, or command-comma)

I have 1 apple id for iTunes store and a different one for my iCloud acct. How can I watch my photo stream on apple tv and be connected to the iTunes store

I have 1 apple id for iTunes store and a different one for my iCloud acct. How can I watch my photo stream on apple tv and be connected to the iTunes store

Use the same Apple ID for everything.

HI there, am having a big problem updating mu iphone due to me forgetting my password, can you tell me how to retrieve it. It seems like i have one apple id for downloads and a different one for updates. Can you help ps.?

Hi There
Am having a big problem updating my iphone 4 Apps, due to a problem with my password for my apple id. But it seems that i have two different ids, one for the updates and another for the downloads. I am not able to retrieve my Id password for updating my Apps. Can you help me ps?
Thank you

What program did you use to fix the internal hard drive? What repairs did it report making? More crucially, if repairs were reported, did you re-run the utility until it reported no problems found? It's possible for one set of problems with a drive to mask others.
If you have about 5GB or so free space on the internal hard drive, you can use your OS X Install disc to perform an Archive and Install to recover from the failed Software Update. When the computer restarts, download and run the OS X Update Combo 10.4.11 (Universal). When the Mac restarts after that, run Software Update. During all this, make sure nothing interrupts or shuts down the Mac! Note that the first start after each of these updates will take significantly longer than subsequent starts, so be very patient.
How did you back up your internal drive to the external one? Did you just drag things over in the Finder, or did you use a utility such as SuperDuper! or CarbonCopyCloner? Does the external HD show up as a bootable volume in System Preferences > Startup Disk, or using Startup Manager?

Easy one for you, I think

Hi ya'll.... here is an easy question for all you Dreamweaver
gurus out there. I want to write my website to a CD so that anyone
with any web browser can read it. I created it in Dreamweaver. How
do I accomplish this?

If it's a static site, get yourself a copy of AutoRun CD.
You burn two files to your CD along with your site files. One
is the
autorun.exe file. The other is an inf text file where you
specify which file
on the CD should load first.
Probably index.html.
http://www.rjlsoftware.com/software/utility/autorun/autorun.shtml
--Nancy O.
"cgarrison" <[email protected]> wrote in
message
news:f1b5g7$j3g$[email protected]..
>
> Hi ya'll.... here is an easy question for all you
Dreamweaver gurus out
there.
> I want to write my website to a CD so that anyone with
any web browser
can
> read it. I created it in Dreamweaver. How do I
accomplish this?
>

Ralph... here's another one for you

I've had this problem where I can talk to Craig, Craig can talk to Joe but I can't talk to Joe.
I've now fixed it so I can ANSWER an invitation from Joe and chat fine.
However, if I call HIM, he sees the invite, tries to accept, then basically locks up,
having to restart iChat completely.
He's on a wireless router in his home, from a DSL connection.
I went to his Mac firewall and opened all the 5000 ports, etc. and the 1024 - etc. ports.
This seemed to make the difference in my being able to accept. I tried turning off his firewall completely and it's still no go.
I'm still stumped. I talk with everyone I contact, all over the place. What's the problem with this one person?
Thanks!

Hi Rick,
If the ports are open with Port Forwarding or Port Triggering it can be a NAT consistency problem.
This app will tell you if this is the problem http://bleu.west.spy.net/~dustin/projects/natcheck.xtp
The solution can be as simple as using UPnP if it is an option on the router or modems.
This mirror of my site has some options to try various things regarding this
http://homepage.mac.com/ralphjohnsuk1/skidoo/page15.html#CertainBuddy
There is a bottom line on this and that is to try a different modem/router.
11:08 PM Thursday; April 27, 2006

Here is one for you DVD sp wiz

I'm working on a pc optibase card, capturing for MPEG-2, we are using Sonic scenarist, lately we are thinking on moving to DVD studio pro, only problem is that from our tests DVD sp can't recognize mpv files (optibase Mpeg -2) we tried to change the ending from mpv to m2v but with no result.
Thank you
Kobi

By de-muxing the file you will get an exact same copy.
As with all codecs there is normally some form of compression involved. If you have to convert for any reason there maybe some loss or degradation, but it should be minimal dependant on which codec you use.
HTH.

Here's a wierd one for ya' (JNI - JVM Maladies!)

I'm at my wit's end, sorry for the abstract manner in which I'm going to describe this, I don't have time to write a novel about the intricacies of what the C code described herein does and I'm sure you won't have time to read it.
I'm using JNI to wrap some C that's about a billion lines deep and at the very core of our product (it would take ten years to replace with an army of engineers).
In the back end, we start a process that allows other processes to connect to its shared memory block (it was designed to be connected to by other C executables). I've wrapped the C client that connects to the server process in JNI. To find the hooks the connecting process uses, it (the C client) reads environment variables that list the locations of files and the address at which the shared memory starts. The connecting process also grabs a semaphore created by the server process.
Okay, that said, the problem I'm having is less complicated. My JNI wrapper works perfectly every time I invoke it from the command line. The JVM comes up, loads the shared library, the C code talks to the already running process and does the work it needs to. THIS NEVER, EVER FAILS! However, when I take the very same java code and put it in a servlet, the C code I'm calling via JNI cannot find the hooks it needs (the error I'm getting has something to do with a semop()). The JNI side is working fine, I don't have a loadLibrary or class locator problem here. For some reason however, the webserver's JVM is hiding shared resources from the native code it is calling.
My question is, what is the @#$!&%#!!! difference between the two JAVA processes calling the same code? Why doesn't a servlet running in Tomcat have access to the already running process when the command line process that does have access and Tomcat have been invoked from the same environment?
I've got some theories about the webserver process having different access permissions or it's use of threads (the command line process that always works is single threaded) and child process spawning, but I don't know enough about the inner workings of the JVM to know where I should look. How do these types of permissions propagate? If the webserver process spawns a thread, does the thread have any knowledge of the environment in which its parent process was created? What about a child process? Any insights?
I've been able to break this in the same way on Solaris and HP-UX (believe it or not, NT doesn't care, I think it might have something to do with using a mutex instead of a semaphore). By the way, I'm using root to spawn all of these processes.
If you can give me a clue as to how to fix this, YOU ARE A GOD!
Anyway, your help would be appreciated!

When I'm running it from the command line, I'm usually logged in as root. I have attempted successfully to run it as other users from the command line. I'm also starting the webserver process as root.
I'm not familiar with a way to set platform specific environment variables in Tomcat, I'm sure I could use the -D option in starting the JVM. However, I have written a native stub that uses putenv() to set all of the environment variables present at the command line when I'm able to successfully invoke my JNI wrapper. This doesn't seem to change anything.
I've thought about this being a permissions propagation issue within the webserver. Any clues as to how I can confirm it?
Thanks for your help!

Firefox on OS X 10.6.8: How to have a different input source for different tabs in one window (the option "Allow a different one for each document" is on)

Currently, firefox 29 keeps one language for different tabs in one window. Different windows can have different input sources...

Thank you for your reply!
I think I've accidentally marked the problem as solved, but in fact it's not.
What is needed is that the firefox remember different input methods (languages, for instance, En or Fr) for different tabs so that when I switch between several tabs I don't need to change the layout.
Chrome remembers my language settings for each tab, so it's not always one language for all the same tabs there. I haven't found such an option in Firefox so far.
Hope it's clear enough.
Thanks in advance.

HP Officejet Pro L7580- here's a new one for HP Mac Architect

So like all the other disgruntled HP users who foolishly installed 10.5 when it was released, I have been without a scanner ever since. Until three days ago, however, I've been able to print, as the driver for the L7580 was included in Leopard. Now, whenever I try to print a document, the print queue opens and the job says "stopped", which, incidentally, is the same thing that happens when I send a print job to my other once-was-a-printer-now-just-a-giant-waste-of-space, the Canon LBP5000. I've racked my brain trying to think if I've done something to trigger this, pestered the HP call in support center, installed, uninstalled and installed the printer again, restarted, replaced the USB cable- anything I can think of. Nothing works. I run a small business and while it's been a huge inconvenience to lose my not so inexpensive scanner, I've made due with an old one waiting for HP to get their act together and release software that actually works with 10.5. Needless to say, I cannot work without a printer. Am I going to have to go back to Tiger now? Spend untold thousands of dollars on a printer that probably won't work with leopard anyway? Can anyone advise? HP Mac Architect?

Try this for a Quick Fix ...........
After reading other forum comments from people having the same problem with the yellow cartridge popping-out, combined with others who have realised that HP have no interest in compensating anyone for this rediculous example of, at best, 'bad design', or at worst 'blatent planned obsolescence', I have created a 'quick fix' that may add another 1, 2 or more years of life to the HP Officejet Pro L7580 Printer.
This is not the elegant technical solution I was hoping for. However, in hindsight, it may prove to be a more reliable solution than replacing the faulty part that is actually causing the problem. So, here it is the Quick Fix ........
I found a wooden triangular door stop that I cut to size that fitted exactly in the space between the plastic door and the offending yellow cartridge. To hold it in place, I wrapped the doorstop with 2" cellotape, then I stuck the door stop to the inside of the plastic door with double sided cellotape (double sided stick-on foam would also work well). With the doorstop in the correct place, the plastic door closed perfectly and was snug enough to apply sufficent pressure to the offending yellow cartridge, and hence stopping it from popping out again. To make sure the plastic door does not 'fly open' with the pressure of the yellow cartridge (when it wants to pop out!), I applied another piece of 2" cellotape around the outside of the door, holding it to the body of the photocopier.
This exercise only took 10-15 mins to do. I feel this is a much better option than spending another $300+ on a new All-in-One system, as well as being a good environmental solution. If this is DELIBERATE 'planned obsolescence', companies like HP need to be more accountable for, at best, 'sloppy design'. Any feedback would be appreciated.

I have an apple ID but I want to use another one to sync all in the icloud. I already create a different one for Icloud but how I change my apple id in the iPhone for iCloud without loosing all my info

my phone can not work

Settings>iCloud...turn everything off here, including Find My Phone. For Contacts, Calendars, Notes, etc. you'll be prompted to keep the data on the phone, or delete it. Select keep. Then, turn off iMessage & FaceTime. Then, delete the iCloud account...Settings>iCloud...scroll down...delete account. Now, set everything back up using your new ID, then turn both iMessage & FaceTime back on, after you've setup the iCloud account.

Here's a new glich for you...

Recently I've been having the same problems as a lot of people on here (Safari crashing, etc) however today my Touch had a glich that makes absolutely no sense to me. I was listening to my music, and while it was on hold, switched to the next song. The music stopped playing, and I got my wallpaper screen as if I had paused the music. When I unlocked it, I was brought to a "Playlists" screen that looked just like the Music browsing area, except on the bottom it was Playlists, Artists, Albums, VIDEOS. I've never seen this before! It was as if it was showing me a library of ALL my content, not just music or just video. I opened up a song and started listening again, and then I went to adjust the volume and A VOLUME GRAPHIC (similar to the one seen on any Macbook) appeared in the middle of the screen, with increasing bars below it as I raised the volume. As soon as I skipped to the next song it was gone and now I haven't been able to find it or the "Playlists" screen since. Does anyone have any idea what's going on?

I think what happened is your ipod somehow launched the ipod application that exists on the iPhone. When you launch the ipod app on the iphone on the bottom it shows playlists, artists, albums and videos by default. After all, the iphone and ipod have the exact same software minus a few apps, so it doesn't surprise me that something like this could happen.

Here's a different one for you...

Similar Messages

Maybe you are looking for