Hey Gurus I've just shot a seminar, three cameras, Cannon's reasonably new XA20HD's. File format 1920X1080 MP4 17mbs 25 frames. Am running PremProCS6. I import the files into Prem, they come in ok but will not display. Got a yellow bar and a yellow Media
Hey Gurus I've just shot a seminar, three cameras, Cannon's reasonably new XA20HD's. File format 1920X1080 MP4 17mbs 25 frames. Am running PremProCS6. I import the files into Prem, they come in ok but will not display. Got a yellow bar and a yellow Media Pending screen. What the? Have to cut this stuff soon! Wont even import into Media Encoder. Says there are no usable streams in the media! Just saw a podcast title about stress in the editing business. Better listen to the one! Any help would be most appreciated. J.
Copy ALL contents of SD card to a folder on edit hard drive. not just video clips, everything. Then in Premiere, import using Media Browser (tab at lower left of Premiere screen). This usually does the trick. There is metadata contained in the SD card files that is needed, not just the video clips alone.
Thanks
Jeff Pulera
Safe Harbor Computers
Similar Messages
-
Page loads but will not display
I have an IP address that allows me to view my cctv cameras.It works fine with Internet Explorer,but when i enter the same address in to my safari browser the page seems to load but will not display anything.
I assume its some thing do with my internet security settings but do not now where to find them to allow this site. Can any one help please.
ThanksTry temporarily turning off your firewall via SystemPreferences>Security>Firewall. If the site then works you can turn the firewall back on and specifically allow Safari.
-
My Mac Air iphoto will display thumbnails but will not display photos in any way - single photo / slideshow etc - any ideas?
Are you seeing this
when you double click on a thumbnail file? If so it's an indication that the file path/link between the thrumbnail and original, full sized file has been broken. Therefore, and assuming you're running iPhoto 9 or later, try the following:
1 - launch iPhoto with the Command+Option keys held down to open the First Aid window.
2 - Run Option #4, Rebuild Database.
OT -
My mac is connected but will not display webpages
My mac says I'm connected to wireless interent, but will not display the webpage. It says that it is not connected to the interent. My hp computer is working though. Does anyone know what is causing it not to connect to the interent and what I can do to get it to connect?
ThanksMake sure in the network settings that you arent trying to connect to the internet through a Proxy server, unless you actually are of course. Make sure the connection you are using is set to get its IP address via DHCP automatically, and that the router you are connecting to is set up to do so.
-
please help - installed IOS7 and now I am having problems playing Words Free on my Iphone. It gives me a pop up telling me to connect to ITunes but will not connect. Cannot get out and have to continually shut down my phone and start over.
Hi, jeantwin.
Thank you for visiting Apple Support Communities.
The steps in the article below may help you resolve the issue with push notifications.
iPad and iPod touch: Unable to use YouTube or Push notifications
http://support.apple.com/kb/ts3305
If the issue persists, try signing out of your Apple ID and then sign back in.
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311
Cheers,
Jason H. -
I just created a new profile/user on my MacBook Pro. My pointer/mouse on my trackpad. It works fine in my older user profile, but when I go to the new profile my mac will not respond to clicks. The Mouse moves but will not click. Already tried restarting and the pram zap. The problem starts when I log out of my main profile. I get to the login screen and my laptop stops responding to clicks. When I manage to make my way back to my main profile the mouse works perfectly. Should I just delete the new profile and try again?
If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
Please tell us more about the modem if the above gives you issues. -
After I updated to iOS 7, my iCloud account is showing the incorrect email address for my Apple ID but will not allow me to change it- it's gray and I can't click on it. How do I fix this?
If you change your email, you do not need to "change" your AppleID. Just edit your email(s) on your Apple ID by logging in to your AppleID account. You should always use the same AppleID for Apple Services (iCloud, iTunes etc) and multiple ID will cause problems and confusion in the future.
You can manage your Apple ID here:
https://appleid.apple.com -
I have a mid-2010 27" Quad Core i5 iMac running 10.8.3. Startup disk recognizes the primary hard drive as a startup volume but will not boot from it. Have tried zapping PRAM, ran disk utility. No errors reported Any thoughts?
My bad Eric. The startup preference recognizes the primary as a 10.8.3 startup volume but when u select it the system does not boot. I can only boot from my external backup drive
-
I have a Macbook Pro. I updated to 10.9.4 an downloaded the trial for Creative Cloud. It downloaded and installed but will not open. I shut down and tried reinstalling. Same problem.
Thanks.I stumbled upon the solution. In addition to downloading Creative Cloud, I needed to go back to the website and download trials for the programs I want to use--Photoshop and Lightroom. Once I did that, I was in business. Would save trouble if that was made clear on the download site.
Thanks -
When I open up my itunes the itunes store looks like it is loading but will not open
When I open up my itunes the itunes store looks like it is loading but will not open
I imagine this is a bit late for you, but to anyone else running into this problem, try the trick mentioned by VFSchreiber in this thread:
Re: Why won't my iTunes movie rental play or download?
This worked for me when I ran into the same issue (can scroll through rented movie but can't play it). Just switch iTunes to the MiniPlayer (in the Window menu) and then back to the normal player. Apparently, you may need to do this a few times. It sounds odd (and I didn't really expect it to work), but it fixed the problem for me. -
Sometimes my iPad1 locks up and has the flat battery graphic after charging all night, but will not work until you disconnect the charger, then it reboots and the battery is fully charged and works normally.
It has only happened for the last month or so
Also, sometimes it drops out of apps, ie facebook etc. just like you have hit the stop buttonWho replaced the battery? If it wasn't Apple the replacement is probably bad also. Either that, or the logic board is bad.
-
my iPhone 4 has just shut down. Rang the phone then vibrated for 2 minutes bank screen, will not turn on, also tried charging and will not charge. Any suggestions? I did download a ringtone app and went on to iTunes to sync!.
Try charging the iPhone via a wall socket for at least 30 minutes then try a reset by pressing and holding the sleep/wake button and the home button for 20 seconds (maybe longer) until the Apple logo appears, ignore the red slider. Then turn back on. You won't lose any data doing the reset.
-
I'm at work and my MacBook Pro is connected wifi but a web page will not display. Other have the pros and is connect. Tried restarting but not working
You're not a liar. They should not charge you $90, it is within the 1-year warranty that comes with it and you are entitled to a free replacement. I have never had the problem myself on a 15 month old MacBook, so there must be SOMETHING that happened to it, maybe without you noticing. But might I recommend a wireless trackpad or Apple "Magic Mouse?"
-
HT201263 IPad starts but will not display home screen.
IPad starts by will not display home screen. Seems to be suspended but will not respond.
Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
The printer is on and working as in making copies but will not print from computer. I am using wireless option.
Please read this post then provide some details. What printer model? What operating system? Are there any error messages on the printer or computer screen?
Running the diagnostics at http://www.hp.com/go/tools may help resolve the issue.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V
Maybe you are looking for
-
Jabber 9 UCM 6 and phone control..
Hello, I'm setting up Presence and Jabber for a client with UCM 6.1. Everthing seems to be working fine except the ability to control desktop phones from Jabber. Although all the settings appear to be ok whenever a user tries to change from softpho
-
One application with Multiple schemas- common application frame work
Hi All, I am trying setup a common application frame work in apex. Please help me. How to achieve this. Creation of one application attached to different schemas at run time. So that my application maintaince is going to be easy instated of creating
-
Installed new iPod + iTunes, closed iTunes and can't open it
I was running on 10.3.8, and QT 6.5.2 and iTunes 4.6. Installed to 10.3.9, QT 7.0, and ran the iPod installer, and installed QT 7.0.3, everything seemed to work fine. My iTunes updated and I pulled my music over to the iPod, then I ejected the ipod,
-
Client import taking too much time
hi all, i am importing a client , i it has complete copy table 19,803 of 19,803 but for last four hours its status is processing scc3 Target Client 650 Copy Type Client Import Post-Proc Profile SAP_CUST Status
-
Why can't I access my mozilla support account
I had trouble the other day accessing my mozilla support account. I was able to sign in which at the top of the page brought up my username and listed the available options (for example, inbox, profile, settings, etc.) but the page otherwise included