Hey guys. my macbook air wont get past the screen with the apple on it during start up. how do i fix this? i have a paper saved on my laptop on need to get at it. thanks guy!

hey guys. my macbook air wont get past the screen with the apple on it during start up. how do i fix this? i have a paper saved on my laptop on need to get at it. thanks guy!

Your boot drive is damaged in some way. If you have an original installation disc, you can boot from that and run Disk Utility. From DU you can select your internal hard drive ("Macintosh HD" is the name Apple puts on it - you may have renamed yours) and select "Verify Disk". If errors come up, try "Repair Disk". If it repairs, then you should be able to restart and boot from it. If it doesn't show up or won't repair, your drive is probably hosed.
Clinton

Similar Messages

  • I'm getting a blank screen when trying to connect to my App Store.how can I fix this ?

    I'm getting a blank screen when trying to connect to my App Store.how can I fix this?

    I got this error after upgrading to new version. After searching these pages for an answer and not finding a usable one, I simply quit and re-opened iTunes, and... voila! Problem solved!

  • My computer wont finish downloading itunes it says that apple application support was not found. how do i fix this?

    my computer wont finish downloading itunes it says that the apple application support was not found and it tells me to uninstal it and download itunes again n i did so n it keeps doing the same thing, even tho i have downloaded itunes before in this computer. please i need help with this!

    With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/download.htm
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • So I dropped my iphone 4 in the pool and i put it in rice. I took it out and all i got was a flashing apple logo screen. I now can get it to work but the screen still flickers constantly and shuts off randomly. How do u fix this?

    mm

    How long did you let it try in raw rice? How much chorine was in the pool?
    If all else fails make a Genius Bar appointment at your nearest Apple Store and do an out-of-warranty replacement for $149 USD.

  • I have been trying to work on my homework all afternoon, via NAU's blackboard system. I am continuously getting booted out of the system, with an error stating "Data execution prevention". How can I prevent this from continuing?

    I have been trying to work on my homework all afternoon, via NAU's blackboard system. I am continuously getting booted out of the system, with an error stating "Data execution prevention". How can I prevent this from continuing?

    If you are wondering why you are not getting any responses, it is because you have vented a complaint without any details that make any sense or give anyone something to work on.
    If you want help, I suggest actually detailing what has happened, with versions of software etc. Anything that would let us assist.
    As a start I am guessing that you have not really got the hang of "How it all works". Firstly download the Pages09_UserGuide.pdf from under the Help menu. Read that and view the Video Tutorials in the same place. A good addition would be the iWork 09 Missing manual book and something to help you learn how to use your Mac.
    If there are specific tasks you need help with:
    http://www.freeforum101.com/iworktipsntrick/index.php?mforum=iworktipsntrick
    Is a good resource.
    Peter

  • My MacBook Air will not turn on. I get a white screen with the apple logo and a spinning star that just does that for hours

    My MacBook Air will not turn on. I get a white screen with the apple logo and a spinning star (search icon). It will spin for hours and never go away unless I power off.

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
    a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.  
    Step 10
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 11
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 12
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 13
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • I downloaded an update for iPhoto yesterday. Now, when I try to open iPhoto...I get a gray screen with the "circling" icon in the middle but it doesn't open. All was fine before the download yesterday? Any suggestions, Thanks. Wayne K..

    I download a suggested "update" from the App Store for my iPhoto yesterday. Now when I try and open my iPhoto, I get a grey screen with the rotating circle icon in the middle......that just keeps rotating. Ergo, it won't open!!! Before the "download" all was fine in Heaven & Earth....now, I'm a little peeved.
    Anyone have a suggestion?
    Thanks,
    Wayne K.
    ps Have a good day, God Bless America ...............and be weary of iPhoto update downloads,very weary.

    No need to be wary of iPhoto updates however it is a good idea to follow the instructions when updating. I haven't updated iPhoto from the App Store before however it should not be much different than doing a DVD update. Here are instructions on updating the library:
    http://support.apple.com/kb/HT4431

  • After running mac tuneup got a red dot on the hard drive icon, nothing would respond, now on restart cant get past white screen with apple logo, mac tune up disk still in laptop

    after running mac tuneup got a red dot on the hard drive icon, nothing would respond, now on restart cant get past white screen with apple logo, mac tune up disk still in laptop

    Restart your MBP holding the trackpad down and hopefully the disk will be ejected.  Then try to return it and get a refund or put it in the trash.  There is nothing that software does for your MBP that you cannot do yourself or with free software.
    If can get your MBP started, delete all traces of the offending software.  Worst case is that you may have to erase the HDD and reload the OS and your user data.  I trust that you have a backup (minus MacTuneUp).
    Courcoul has given you his opinion in a very succinct manner, and as you might surmise, I agree with him.
    Ciao.

  • Sometimes when I open my laptop back from sleep, I get a black screen with the cursor showing.

    Recently I've been getting this weird problem where my macbook air will show a black screen with only the cursor visible that I can move around but nothing else can be done to get to the desktop. The only way is to close the lid and wait for around 10 or more seconds and then open the lid again to bring the laptop back from sleep and hope that the laptop goes to the lock screen and then to the desktop. This works often but sometimes the only solution seems to be to restart the laptop. This also happens when I tilt the lid to the point where it is almost closed and when I tilt it back the screen presents the above state. Theis has been happening often now and it is almost impossible for the above not to happen atleast 2 to 3 times a day. iThis is a relatively new problem that has been occuring since the past two weeks or so and never happened to me on my Macbook Pro 15 2011. My current system is a Macbook Air 11" 2013 Haswell 1.3 Ghz 4GB RAM 256 GB SSD. Now I dont want to have to send in my laptop if I dont have to if there is a way I can solve this myself. Anybody else have this problem?

    Hello tseten,
    I would be concerned too if my MacBook Air was not waking from sleep appropriately.  For an issue like this, I recommend resetting your System Management Controller (SMC) and NVRAM.
    Resetting the SMC on portables with a battery you should not remove on your own
    Note: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
    You can find the full article here:
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/ht3964http://support.apple.com/kb/ht3964
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    You can find the full article here:
    About NVRAM and PRAM
    http://support.apple.com/kb/ht1379
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • HT3964 I am not able to reboot my Mac desktop. When I switch on the Mac, I get a white screen with the Apple logo and the little wheel below that goes round and round but the computer refuses to boot.

    Hi, I am not able to reboot my Mac desktop.
    When I switch on the Mac, I get a white screen with the Apple logo and the little rotating circle.
    The system refuses to boot.
    What can I do?
    Marcus

    We need to get you moved. This forum is for mini-tower Macs built between 1998 and 2005 and doesn;t get as much traffic ("eyeballs on the problem") as the forums for newer Macs.
    Please do "About this Mac" from you Apple menu and tell us what that says for "processor" and Mac OS version. Looks like this:
    or this for later Mac OS versions:
    With that we can figure out which of the two iMac forums you need and get the Hosts to move your post.

  • On start up i just get a grey screen with the apple logo-this has suddenly started happenin. Please help?

    on start up i just get a grey screen with the apple logo-this has suddenly started happenin. Please help?

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
    a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.  
    Step 10
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 11
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 12
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 13
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • My LG G3 gets stuck in an "updating" loop and not load new emails. How do I fix this?

    My LG G3 gets stuck in an "updating" loop and not load new emails. How do I fix this?

    If you toggle Airplane mode On/Off, does it resolve?

  • My imac won't boot up.  I get a white screen with the apple logo and the spinning  spiral--any ideas?

    my imac won't boot up.  I get a white screen with the apple logo and the spinning  spiral--any ideas?
    I have started having trouble since i had to upgrade OS the latest in July 12.

    http://support.apple.com/kb/TS2570    Follow this article and when it gets to the part where you go into disk utility using your install disc, you'll actually boot up holding down Command and R

  • HT201269 I recently switched from 4S to Galaxy S4. I am not getting texts from iphone senders. When the message is sent it goes as a imessage. How do I fix this??

    I recently switched from 4S to Galaxy S4. I am not getting texts from iphone senders. When the message is sent it goes as a imessage. How do I fix this??

    Turn off iMessage on the iPhone as should have been done prior to switching devices.
    Settings > Messages > iMessage > OFF

  • TS4036 I am trying to restore with icloud on a new ipad.  WHen I get to iCloud Sign In, it keeps timing out.  Why and how can I fix this?

    I am trying to restore with icloud on a new ipad.  WHen I get to iCloud Sign In, it keeps timing out.  Why and how can I fix this?

    Sign out of old email and sign in with new.

Maybe you are looking for