Hey guys need help regarding iTunes U. My school is moving for iOS and Mac in the classroom and I have been appointed Junior Administrator for the schools technical department and integrating these devices into the classroom.

Hey guys need help regarding iTunes U. My school is moving for iOS and Mac in the classroom and I have been appointed Junior Administrator for the schools technical department and integrating these devices into the classroom.
I have an appointment with a director on Tuesday. I want to demo iTunes U. Problem is I have never used it before and have no idea how to set it up and even if I should sign up.
Please help any ideas regarding iTunes U and how I should direct the meeting tomorrow.
Please please post here.
Thanks
Tiaan

Greetings fcit@!A,
After reviewing your post, it sounds like you are not able to select none as your payment type. I would recommend that you read this article, it may be able to help the issue.
Why can’t I select None when I edit my Apple ID payment information? - Apple Support
Thanks for using Apple Support Communities.
Take care,
Mario

Similar Messages

I want to share PDF documents with others. These documents have been edited (mostly highlights) by me. I want to share these documents without the changes I've made. How can I do this?

I want to share PDF documents with others. These documents have been edited (mostly highlights) by me using Preview. I want to share these documents without the changes I've made. How can I do this? Do I have to manually erase all of the changes I've made. The people I want to share it with also have macs.
Isaac

You can move the iTunes folder to a separate drive on your pc an then configure each account to use this drive / folder as iTunes library ... The problem is, that iTunes by default stores everything in your personal music folder which is separate for each user account in windows (and by default is on "C" drive).
I create a separate partition on every pc/laptop (and map a drive name) where I store music, videos and other mass data. This will also keep the "C" drive small, which is backed up from time to time and so my backup is also small.

While partitioning in Lion 10.8, I get the following error message: I have been attempting to partition a 2 GB hard drive that I just formatted using the Disk Utilty in Mountain Lion (10.8) and get the following error message: DiskManagementTool has died

I have been attempting to partition a 2 GB hard drive that I just formatted using the Disk Utilty in Mountain Lion (10.8) and get the following error message:
DiskManagementTool has died. Disk Utility will need to be restarted. The log shows the following:
2012-09-10 11:20:51 -0700: Preparing to partition disk: “HitachiG ST Media”
2012-09-10 11:20:51 -0700:      Partition Scheme: GUID Partition Table
2012-09-10 11:20:51 -0700:      2 partitions will be created
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700:      Partition 1
2012-09-10 11:20:51 -0700:           Name          : “Alex's External Storage”
2012-09-10 11:20:51 -0700:           Size          : 1.5 TB
2012-09-10 11:20:51 -0700:           File system     : Mac OS Extended (Journaled)
2012-09-10 11:20:51 -0700:           Do not erase contents
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700:      Partition 2
2012-09-10 11:20:51 -0700:           Name          : “Alex's External Storage 2”
2012-09-10 11:20:51 -0700:           Size          : 500.05 GB
2012-09-10 11:20:51 -0700:           File system     : Mac OS Extended (Journaled)
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700: Beginning partition operations
2012-09-10 11:20:51 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:55 -0700: Disk Utility started.
Does anyone have any thoughts? Cant find anything on the web with this

I have been attempting to partition a 2 GB hard drive that I just formatted using the Disk Utilty in Mountain Lion (10.8) and get the following error message:
DiskManagementTool has died. Disk Utility will need to be restarted. The log shows the following:
2012-09-10 11:20:51 -0700: Preparing to partition disk: “HitachiG ST Media”
2012-09-10 11:20:51 -0700:      Partition Scheme: GUID Partition Table
2012-09-10 11:20:51 -0700:      2 partitions will be created
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700:      Partition 1
2012-09-10 11:20:51 -0700:           Name          : “Alex's External Storage”
2012-09-10 11:20:51 -0700:           Size          : 1.5 TB
2012-09-10 11:20:51 -0700:           File system     : Mac OS Extended (Journaled)
2012-09-10 11:20:51 -0700:           Do not erase contents
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700:      Partition 2
2012-09-10 11:20:51 -0700:           Name          : “Alex's External Storage 2”
2012-09-10 11:20:51 -0700:           Size          : 500.05 GB
2012-09-10 11:20:51 -0700:           File system     : Mac OS Extended (Journaled)
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700: Beginning partition operations
2012-09-10 11:20:51 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:55 -0700: Disk Utility started.
Does anyone have any thoughts? Cant find anything on the web with this

Guys need help is regarding games. I want to install games like commandos, gta vice city, counter strike etc I mean action games in which we do levels, like games in playsatation and xbox ?

Guys need help is regarding games. I want to install games like commandos, gta vice city, counter strike etc I mean action games in which we do levels, like games in playsatation and xbox ?

You can only install games that are in the iTunes app store on your computer and the App Store app directly on the iPad - if there are games like those that you mention in your country's store then you can buy and install them. Have you had a look in your country's store ?

HT1923 I have a family of 7...5 of us all have either an Apple Ipod or Iphone and all of us have trouble plugging our devices into the computer n connecting to itunes!...What can we do to fix this????!!!!!!!!

I have a family of seven. Five of us all have Apple Ipods or Iphones. Everytime there is a new update for itunes or any of us try to plug our devices into the computer to hook up to itunes we all have problems or it won't let us!...It's getting to the point that we don't want to continue spending hundreds of dollars on Apple products that keep giving us problems. How can this problem be fixed???!!!

What is the problem? We cant help if you dont tell us what the problem is.
Do you get an error message? Do you plug the devices in and nothing happens? Is content not syncing?
Can you elaborate more please?

When I plug my device into the computer for the first time the setup process doesn't begin. What do I do?

When I plug my device into the computer for the first time the setup process doesn't begin. What do I do?

Try to connect in recovery mode, explained in this article:
iOS: Unable to update or restore
Before that, back up your device, explained here:
iOS: Back up and restore your iOS device with iCloud or iTunes
How to back up your data and set up as a new device
You can check your warranty status here:
https://selfsolve.apple.com/agreementWarrantyDynamic.do

HT1222 hey i need help with my ipod, i try to download facebook app and it wouldn't let me because it say ios 4.1 require and i dont have ios how do i get it ?

hey i need help with my ipod, i try to download facebook app and it wouldn't let me because it say ios 4.1 require and i dont have ios how do i get it ? please i need help ASAP

What generation of iPod touch do you have? If you don't know, see:
http://support.apple.com/kb/HT1353
If you have an first-generation iPod touch, it can only go to iOS 3.1.3 and hence will not run the Facebook app. If you have a second-generation iPod touch, see:
http://support.apple.com/kb/HT4623
Regards.

Need Help Regarding ibook

em user of   iphone 3gs os 6.1.6
Yesterday i restore ma iphone
after that em Unable to   install    ibook in ma iphone its say me that u need os 7 ...
need help regarding this issue....   what i do is there any alternative app ...?

Hey Seungly,
I've realized that my computer runs fine UNLESS I turn the AirPort on to connect to the Internet. The moment I click "Turn AirPort On," the "You need to restart your computer" screen immediately pops up. Is there any connection between AirPort and my problem?
That could very easily be the case, a bad Airport card. Look at this recent post:
http://discussions.apple.com/thread.jspa?messageID=7960754&#7960754
John diagnosed it from the panic log.
Does yours say something similar?
Richard

I recently bought a new i phone 4 as my other one had seen beter days and for the last sevral days have been trying to transfer my photos ect from my old phone to my new one after I've plugged my old iPhone into iTunes to back it up i then plug in my i

I recently bought a new i phone 4 as my other one had seen beter days and for the last sevral days have been trying to transfer my photos ect from my old phone to my new one after I've plugged my old iPhone into iTunes to back it up i then plug in my one to transfer it over I've had no luck I've tryed restoring my new phone to the last time i backed up my old files the phone restores but always to its own backup point wen i first connected it to iTunes can anyone help me please?

Since this is the second computer you've had this problem with, I recommend you look for answers on the iPhone forum. My thinking is it is an iPhone issue rather than a computer issue (unless it is some software incompatibility).

Image size and mime type.. non-java guy needs help

Image size, mime type.. non-java guy needs help
Im not at all familiar with java so this is really weird for me to work out. I?ve been doing it all day (and half of yesterday).
Im trying to write a custom clodFusion tag in java that gets the width, height, size and MIME types of a given file. I?ve been trying to get it to work on the command line first. I can get the width and height but cant get the size and the MIME type.
Here is what I got
/*import com.allaire.cfx.*;*/
import java.awt.image.renderable.*;
import javax.media.jai.*;
import com.sun.media.jai.codec.*;
import java.io.*;
import java.util.*;
public class ImageInfo {
private RenderedOp image = null;
private RenderedOp result = null;
private int height = 0;
private int width = 0;
private String type = "";
private String size = "";
public void loadf(String file) throws IOException
file = "80by80.jpg";
FileSeekableStream fss = new FileSeekableStream(file);
image = JAI.create("stream", fss);
height = image.getHeight();
width = image.getWidth();
System.out.println(height + "\n");
System.out.println(width);
System.out.println(type);
public static void main(String[] args) throws IOException {
ImageInfo test = new ImageInfo();
test.loadf(args[0]);
can anyone please help me out to modify the above so I can also print the mime type and the file size to screen.
thanks for any help

any suggestions?

I've been running Windows XP over bootcamp on an iMac for a few years now and I can't seem to get any sound from external devices into the machine. Any ideas?

I've been running Windows XP over Bootcamp on iMac for a few years and I can't seem to get any sound from external devices into the machine. Any ideas?

O.K. fgonoz98
I would do 1 thing at a time:"now the micropohone is not working in facetime"
Here is what you can check to get your mike working in facetime:
1. Hold down option while you click on the speaker next to time a. date,
under input Device see if your mic is marked. If not: ✔️
2. Click the apple top left/System Prefs./click on the Sound speaker:
under Input highlight microphone.
3. When you have factime on go to video above scroll and see if your mic is marked ✔️
If that does not get it to work there is more you can check:
(Utilities/Audio, midi setup)
For any other audio device you do this for input and output.
If you get stock post back

I am trying to download through Itunes the news iOS 4.3.3 software to my Ipod touch 4th G. it starts downloading just fine, but when it gets about 200mg into the 600 mg file, it comes back with stopped (err= -3259) has anyone seen this???

I am trying to download through Itunes the news iOS 4.3.3 software to my Ipod touch 4th G. it starts downloading just fine, but when it gets about 200mg into the 600 mg file, it comes back with stopped (err= -3259) has anyone seen this??? I have tried downloading this at different times of the day, and have also tried it on different internet service providers ... still recieve same error msg...

Try this article (disable firewall)
http://support.apple.com/kb/TS2799

I just bought 4 songs on iTune.Album:Voices light to the wind.I had the cd at home, but I lost it and decided to download the songs which I liked so much,I'd like to ask you to transfer me these songs with the original time!

I just bought 4 songs on iTune.Album:Voices light as the wind.I had the cd at home, but I lost it and decided to download the songs which I liked so much,I'd like to ask you to transfer me these songs with the original time , the songs are :
Venus (5:55 seconds) , Andromeda ( 8:04 seconds) , Hestia ( 9:47 seconds) and Aphrodite ( 6:39 seconds) !
I thank you in advance for your attention!
Flávia.

http://www.apple.com/support/itunes/contact/

Need HELP regarding installinfg CR2008/Visual Advantage

I need help regarding installing CR2008/Visual Advantage. I had the evaluation copy of cr2008. My compnay purchased the CR2008 Visual Advantage. Upon calling your customer service, I was told that I had to UN-install the CR2008 evaluation copy then install the CR2008. I did the unstall HOWEVER, when I try to install the CR2008 that we purchased, i get the following error..HR
HR -2147024770-"c:\program files\business objects enterprise 12.0\win32_x86\REPORTCONVTOOL.DLL FAILED TO REGISTER"..
I get more that just that one...I have received this before and based upon this formum, i have delted the regristry in the following using regedit.exe
HKEY_LOCAL_MACHINE\SOFTWARE\BUSINESS OBJECT ;
HKEY_CURRENT_USER\SOFTWARE\BUSINESS OBJECTS..
Afeter i deleted the keys, I re-boot my pc and try to install the coftware again...BUT I GET THE SAME ERRORS...I have tryied this several times....what am i missing/not doing correctly

Hi Shamish
Actually you were on the right track, i think you just have to increase PSAPTEMP a bit and you will be fine. 358 MB seems just too small, i suggest you increase it to at least 2GB.
1. what will be the difference in use of PSAPUNDO and PSAPTEMP while copy is running. ( i.e. what will be entered in PSAPUNDO and what will be filled in PSAPTEMP.)
PSAPTEMP: is needed for large sort operations, as mentioned when you have a select with an ORDER BY clause, or if you do join two tables. During the client copy some sorting might be needed for special tables (cluster tables) where data is stored sorted.
PSAPUNDO: undo space is only needed for DML (data manipulation), if data is changed undo is generated. This obviously is heavily the case during a client copy.
2. the target client already has a copy taken 1 month before. so I think while importing it first delete existing data and then copies the new one.
So If I first delete the target client and then take import on it; will it have advantage in regards of getiing UNDO or TEMP segments getting filled ?
Deleting the client first might help for the undo problem, but you already solved that. I cannot imagine, it will help for the PSAPTEMP issue. As i said i would just increase PSAPTEMP and restart the copy.
One more add: if you are doing the client copy with parallel processes, this will influence your requirements on temp and undo space, because of the concurrently running processes.
Best regards
Michael

Need Help Regarding Enabling The Matrix

Hi All,
We have got one user form and we have got one choose from list and one matrix, on click of choose from list the value will be displayed in the text box and at the same time matrix should get enabled. But it;s not happening in our case. The value is coming in the text box through choose from list but matrix is not getting enabled. We are able to change the back ground color of the matrix, make first column invisible and all but not able to enable the matrix. We need help regarding this one.
Regards,
Jayanth

Hey first bind the columns of matrix to any user datasource
and then you can enter any thing into your matrix
following code may help
suppose you have one column
oForm = SBO_Application.Forms.Item("URFRM")
oUserDataSource = oForm.DataSources.UserDataSources.Add("URDSName",
SAPbouiCOM.BoDataType.dt_SHORT_TEXT, 20)
oMatrix=oForm.Item("URMATRX")
oMatrix = oItem.Specific
oColumns = oMatrix.Columns
oColumn = oColumns.Item("URCOLName")
oColumn.DataBind.SetBound(True, "", "URDSName")
oMatrix.Addrow()
hope this will help
additionally you can look at this sample
.....SAP\SAP Business One SDK\Samples\COM UI\VB.NET\06.MatrixAndDataSources

Hey guys need help regarding iTunes U. My school is moving for iOS and Mac in the classroom and I have been appointed Junior Administrator for the schools technical department and integrating these devices into the classroom.

Similar Messages

Maybe you are looking for