HFR - 5200: Error executing query: Invalid Item ID

Hi All,
We are using Hyperion HFM application 11.1.1.3. Recently we have upgraded the Oralce Database to 11.2.0.2 and reconfigured the HFM application with this new database version. When I tried to run the Financial reporting through the HFR studio, I am getting error message - "5200: Error executing query: Invalid Item ID". Please could you help me to resolve this issue.
Thanks,
Aravindh K

Did anything change on the database side? Alias, member name? "Error executing query" usually is associated with a change in the database.
Regards
Celvin
http://www.orahyplabs.com

Similar Messages

HFR Issues - "5200: Error executing query: Invalid Item ID"

Hi All,
We are using Hyperion HFM application 11.1.1.3. Recently we have upgraded the Oralce Database to 11.2.0.2 and reconfigured the HFM application with this new database version. When I tried to run the Financial reporting through the HFR studio, I am getting error message - "5200: Error executing query: Invalid Item ID". Please could you help me to resolve this issue.
Thanks,
Aravindh K

This was due to an invalid default Point of View for the user that was incompatible with the particular report.
Change the Preferences to User Point of View Preview and run the report again.
File > Preference > Financial Reporting > Select Preview "ON" under USer Point of View box.
Re-run the report and select the desired POV.
This will prompt the user to change their POV every time he or she opens a report. They can select the correct POV and the report runs correctly.
You can turn off later. Let me know if it fixed this issue.

5200 : Error Executing query , Invalid Item ID in HFR

Hello,
To start with I read about this Error in OTN discussion forum itself and none of them helped in this situation.
Basically , We are trying to Make some modifications in a Report from Financial Reporting studio. When tried to run the report within HFR got this Error. The FR Admin logged out and signed in with my ID , it worked. Seems like user specific. Just wondering how can the report run from my ID rather than an Admin ID. And this is specific to only certain set of reports.
Any comments ?
Thanks !!

Did anything change on the database side? Alias, member name? "Error executing query" usually is associated with a change in the database.
Regards
Celvin
http://www.orahyplabs.com

5200: Error executing query: Invalid Item ID. Pls help

Hi
i get this error above when i try to run a report from the workspace and it's specially for some reports.
I use HFM 9.2, the database connection is configured correctly, and the user with the problem
above (comes from msad) has all the rights, permissions and he can run others reports without any problem.
Any idea to fix this issue?
thanks for your help

We had several users experiencing this on various reports. This was due to an invalid default Point of View for the user that was incompatible with the particular report. We changed their preferences to prompt for POV and it solved the issue.
This can be changed in Workspace (we are on 9.3.1, so it may be a little different) under File | Preferences. Choose Financial Reporting and set the User Point of View Preview value to On. This will prompt the user to change their POV every time he or she opens a report. They can select the correct POV and the report runs correctly.
Let me know if this works. If not, you can delete the POV from the server and it will reset when the user logs back in.

5200: Error executing query: in report (Workspace - Hyp Financial Report)

I tried to open a report in the workspace and this error appeared only in an environment in other open properly, the reports are the same.
Appears Only "5200: Error executing query: in report"
What can I do?

The below link may be provide some insight:
5200: Error executing query: Invalid Item ID. Pls help
Also check log file for details about the error you are getting so as to get more information.

5200: Error executing query: The data form grid is invalid.

Hi,
I am getting this error " 5200: Error executing query: The data form grid is invalid. Verify that all members selected are in Essbase. Check log for details.
com.hyperion.planning.HspException;hasPovDims=1;povXML=<?xml version="1.0"?><datasources><datasource name="Profit " dsid="228af2c3_129ca3dd85c_-77b1" allowEdit="1"><dim name="Period" dimIndex="1" dsName="Profit " keyDimName="Period" memberName="Apr" displayName="Period: Apr"/><dim name="Year" dimIndex="2" dsName="Profit " keyDimName="Year" memberName="FY10" displayName="Year: FY10"/><dim name="Entity" dimIndex="5" dsName="Profit " keyDimName="Entity" memberName="9999" displayName="Entity: 9999"/></datasource></datasources>"
I have checked that both the systems essbase and planning are same. nothing's different. still i cannot find the exact reason why the report is not working.
can any please help me.
btw, i am using Hyperion Planning 9.3.1
Thanks,
BIMS

Hi
You probably deleted some members from outline that are used by report
I would recommend you to open you report/grid via rep.client and try to find which elements are abcent
Regards
Alexander
Edited by: Softperson on 19/8/2010 17:38

5200:Error Executing Query

Hi,
I am getting below error while running a report in FR.
5200:Error Executing Query:
Could you please let me know what is the problem and how to resolve it.
Thanks,

Hi,
This might be due to corrupt POV this can be resolved by just deleting POV for the use and again setting it up.
Regards,
Gyan

FR reports error-5200: Error executing query

I'm working on FR-11.1.1.3.0238 version. i'm facing issues with some of the reports related to planning application db while launching reports in workspace. Where as the reports are opening with out any issues in FR studio and there is no error message recorded in the studio.The error message is recorded in the workspace related log file.
I thought that there might be any pov corruption issue so i ran the ManageUserPov utility as well but there is no luck.
Let me know the cause of this error message and also the resolution for it.
Below is the error message info,
*12-12 09:29:10 ERROR jsp     5200: Error executing query: java.lang.ArithmeticException: / by zerojava.lang.ArithmeticException*
com.hyperion.reporting.util.HyperionReportException: 5200: Error executing query: java.lang.ArithmeticException: / by zerojava.lang.ArithmeticException
     at com.hyperion.reporting.webviewer.WebDynamicReport.execute(Unknown Source)
jsp_servlet._modules._com._hyperion._reporting._web._reportviewer.__hrrunjob._jspService(__hrrunjob.java:1411)
     at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at com.hyperion.reporting.webviewer.HRLocaleFilter.doFilter(Unknown Source)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:531)
     at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:459)
     at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:159)
     at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:180)
     at jsp_servlet._modules._com._hyperion._reporting._web._reportviewer.__hrcheckforpovorprompt._jspService(__hrcheckforpovorprompt.java:1486)
     at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at com.hyperion.reporting.webviewer.HRSecurePagesFilter.doFilter(Unknown Source)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at com.hyperion.reporting.webviewer.HRLocaleFilter.doFilter(Unknown Source)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3242)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2010)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1916)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1366)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
Thanks in advance
Edited by: kailash on Dec 13, 2012 5:59 PM

Neeraj,
In the FR report server the settings are as you suggested except the TcpTimedWaitDelay = 60, this setting is set to 30.
The same settings are there in Essbase and Planning servers.
So i would like to know what exactly is all about the setting and the possible cause of the problem. It would be very helpful if i can get the cause.
Thanks in advance
Edited by: kailash on Dec 19, 2012 9:03 PM

Hyp FR Error: 5200 : Error executing query. Exceed max row number 100000

Hi,
I am getting the error
5200 : Error executing query. Exceed max row number 100000
when I run the report on Financial Reporting. It gives the same error when run on Workspace.
Have you guys encountered this error before? What are the best ways to tackle it? Help is much appreciated guys.
-- Adi
Edit 1 - I tried to simplify the parameters but I still get the same error making me suspect that the issue is not the 100000 row issue.
Edited by: Aditya26 on Apr 11, 2012 9:02 AM

Hi Adi,
This is from My Oracle Support:
How to Increase Row Limit to Avoid Error "Exceed Max Row Number 100000" [ID 866832.1]
Modified 23-FEB-2012 Type HOWTO Status PUBLISHED
In this Document
Goal
Solution
Applies to:
Hyperion BI+ - Version: 9.3.1.0.00 to 11.1.1.3.00 - Release: 9.3 to 11.1
Information in this document applies to any platform.
Goal
How do you increase the maximum row limit to avoid the error "5200: Error executing query: Exceed max row number 100000"?
Solution
1.Edit \Hyperion\common\ADM\<version>\lib\ADM.properties as follows:
From MAX_ROW_NUMBERS=100000 to MAX_ROW_NUMBERS=500000
If you are running extremely large reports, you can increase the limit.
2.Restart Reporting and Analysis services.
For version 11.1.2.x
The path of ADM.properties file in these versions should be located under:
%Oracle_Home%\Middleware\EPMSystem11R1\commo\ADM\11.1.2.0\lib
Cheers,
Mehmet

5200: Error executing query: ColumnOutOfRange

I'm getting the following error message when running a Hyperion report:
5200: Error executing query: ColumnOutOfRange
A report is running for some dimensions, but not others. What causes this error?
Running 11.1.1.3
Edited by: 919018 on 06-Mar-2012 02:30

most of the 5200 errors I have seen are related to a POV issue. Do you have any dimensions that are on POV?
If yes, login to Workspace > File > Preferences > Financial Reporting > User Point of View > If it is Off, select ON, click OK. Log off and log back in. Try to run the report and see if the issue is still there.
Cheers,
Mehmet

5200:Error executing query: null

I am getting the error message 5200:Error executing query: null when trying to run a report that was perfectly fine a week ago. I searched on the internet and running the utility DeletePOV.cmd seems to resolve this issue for a lot of people. My issue is, I'm not sure what I need to modify in this file in order for it to work for me. I have tried just double clicking on this cmd file and nothing happens.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SETLOCAL
@ECHO OFF
TITLE HR Delete User POV Utility
if "%1" == "" goto Usage
if "%2" == "" goto Usage
if "%3" == "" goto Usage
if "%4" == "" goto Usage
SET CLASSPATH=F:/Hyperion/HyperionReports/lib;F:/Hyperion/HyperionReports/lib/HAB.jar;F:/Hyperion/HyperionReports/lib/HReports.jar;F:/Hyperion/HyperionReports/lib/HyperionADMWidgets.jar;F:/Hyperion/HyperionReports/lib/activation.jar;F:/Hyperion/HyperionReports/lib/jakarta-regexp-1.2.jar;F:/Hyperion/HyperionReports/lib/mail.jar;F:/Hyperion/HyperionReports/lib/swingall.jar;F:/Hyperion/common/ADM/7.0.1/lib;F:/Hyperion/common/ADM/7.0.1/lib/adm.jar;F:/Hyperion/common/ADM/7.0.1/lib/ap.jar;F:/Hyperion/common/CSS/2.5.3/lib/css-2_5_3.jar;F:/Hyperion/common/loggers/Log4j/1.2.8/lib/log4j-1.2.8.jar;F:/Hyperion/common/XML/JAXP/1.2.2/dom.jar;F:/Hyperion/common/XML/JAXP/1.2.2/jaxp-api.jar;F:/Hyperion/common/XML/JAXP/1.2.2/sax.jar;F:/Hyperion/common/XML/JAXP/1.2.2/xalan.jar;F:/Hyperion/common/XML/JAXP/1.2.2/xercesImpl.jar;F:/Hyperion/common/XML/JAXP/1.2.2/xsltc.jar;F:/Hyperion/HyperionReports/JRE/Sun/1.4.1_03/lib/i18n.jar;F:/Hyperion/HyperionReports/JRE/Sun/1.4.1_03/lib/charsets.jar;F:/Hyperion/common/XML/JDOM/0.8.0/jdom.jar;F:/Hyperion/common/JCE/1.2.2/US_export_policy.jar;F:/Hyperion/common/JCE/1.2.2/jce1_2_2.jar;F:/Hyperion/common/JCE/1.2.2/local_policy.jar;F:/Hyperion/common/JCE/1.2.2/sunjce_provider.jar;F:/Hyperion/HyperionReports/lib/planning/ext/servlet.jar
"F:\Hyperion\HyperionReports\JRE\Sun\1.4.1_03\bin\java" com.hyperion.reporting.reportstore.DeleteUserPov %1 %2 %3 %4 %5
goto End
:Usage
ECHO Usage: DeleteUserPov <ReportsAdminUserName> <AdminPassword> <ReportServerName> <DataSourceUserName>__<DataSourceServerName>__<AppName>__<DbName>__<DataSourceType> [ShowOnly]
ECHO The 4th argument can use Regular Expressions. A link which describes in detail what a regular expression is "http://jakarta.apache.org/regexp/apidocs/"
ECHO We can pass an optional 5th argument ShowOnly at the end to display a list of UserPov's which satisfy the search criterea.
ECHO
ECHO An example for Essbase datasource would be DeletePov hyperion reports localhost hyp__localhost__Sample__Basic__Essbase
ECHO An example for HFM datasource would be DeletePov hyperion reports localhost hyp__localhost__Hfm__Hfm__FinancialManagement
ECHO An example for Planning datasource would be DeletePov hyperion reports localhost hyp__localhost__Plan1__Plan1__Planning
:End
ENDLOCAL

You will have to run the utility in the command prompt of the server. Within the command prompt, Navigate to the location where the utility is present and run the below command:
DeleteUserPov <ReportsAdminUserName> <AdminPassword> <ReportServerName> <DataSourceUserName>__<DataSourceServerName>__<AppName>__<DbName>__<DataSourceType>
An example for Essbase datasource would be DeletePov hyperion reports localhost hyp__localhost__Sample__Basic__Essbase
An example for HFM datasource would be DeletePov hyperion reports localhost hyp__localhost__Hfm__Hfm__FinancialManagement
An example for Planning datasource would be DeletePov hyperion reports localhost hyp__localhost__Plan1__Plan1__Planning
HTH-
Jasmine.

Error 5200 Error executing query

The rest of the message reads...
"...the form grid is invalid. verify that all members selected are in Essbase. Check log for details.com.hyperion.planning.hspexception.?
I am using Hyperion reports to connect to a Hyperion Planning application. I noticed then I select only one member from this dimension, I do not get this error message and I get the report as what I wanted but if I select level 0 or descendants from the dimension, I get the error. I have applied some suppression to the rows and this form grid is also extracting some cell text information.
Please help. thanks.

I did a full refresh from planning to essbase and I still got that error. It seems to happen to only a certain branch of the dimension.
Is there a way to select level 0 of a particular branch of the dimension? (similar to calc script @relative() function)
The error message does not appear if I select only one member and the dimension I am reporting is huge, too tedious to hunt down the errant member/branch.

Error Executing Query

Hi All,
I am working on financial report 11.1.1.3. I created a income statement report using database connection plandetails.
While in web preview warning message like " 5200:Error executing query. The data form grid is invalid. Verify that all members selected are in essbase. Check log for details.com.hyperion.planning.HSPException".
please, any one help me to sort out this issue.
Thank You,
EP

Check that the user is provisioned for the Planning application. Not exactly sure of the minimum role in 11.1.1.3, but "Planner" should be sufficient, possibly view user (I'm using 9.3.1 roles as an example).

Error executing Query - Workspace report error.

Hi All,
One of our user is getting "5200:Error executing Query" message while running the report in Hyperion Financial reporting workspace,how ever if I run this report with my login on his system I am able to run it.
Could you please put some flash on it what may be the reason behind the same.
waiting for your reply.....
Thanks,

Hi, in general the 5200 error means that the user cannot connect to run the report.
What this means is that the user either doesn't have:
- the necessary Workspace permissions, or
- the necessary data source permissions to run the report. This can either be correct essbase permissions or perhaps the report uses a member they do not have access to see.
I think from memory there should be a Details button on the error message which the user sees which should provide more detailed information. Can you confirm and reply back?
Cheers, Iain

Error Opening Reports (Cannot find Dimension Scenario, Error executing query: the member null doesn't exist in this application)

Hello,
two of our users get the following error message, when opening two specific reports:
First Report: Cannot find Dimension Scenario.
Second Report: Error executing query: the member null doesn't exist in this application.
Other users can access these reports, and the same users where the problem occurs can access other reports in the same folder.
I set the same rights for me, but i can access the reports without problems.
Somebody encountered the same problem before?

Hi there,
I had the same issue a few weeks ago... not sure how it happened but it was related only with my username.
In order to fix it:
1. I created a report which does not require to select the scenario in advance. Try to use the default data-grid that you get when you first create a report for example.
2. When the user runs the report, try to see if he can see the dimension. Do not use the missing dimension on rows or columns. If he can see the dimension, ask him to select one scenario. This will solve the issue.
3. If he cannot see the dimension, try to change the layout of the report.
Regards,
Thanos

HFR - 5200: Error executing query: Invalid Item ID

Similar Messages

Maybe you are looking for