Hi, 3 weeks ago i just got my iphone4 for and then i upgraded it to iOS5..am just wondrin', does changing of the iOS causes the phone to shuts down automatically and turn on again? thanks.. =)

hi, 3 weeks ago i just got my iphone4 for and then i upgraded it to iOS5..am just wondrin', does changing or upgrading the OS causes the phone to shuts down automatically and turn on again? thanks.. =)

How long are you leaving it on the charger?
Are you connecting it directly to an electrical outlet or trying to charge via USB?  USB may not provide enough power to adequately charge the device if the battery is that low.
If none of that helps, then the only option would be a warranty replacement as either the battery or system board is bad.

Similar Messages

  • Hello! I just figured this out.....When Firefox is open, my Illustrator CS2 modifier keys stop working? As soon as I shut down Firefox, they start working again. Please help! Thanks!

    I just figured this out.....When Firefox is open, my Illustrator CS2 modifier keys stop working?
    As soon as I shut down Firefox, they start working again. Please help!
    == This happened ==
    Every time Firefox opened
    == Not sure.

    Try to create a new profile as a test to check if your current profile is causing the problem.
    See "Creating a profile":
    If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over problems.

  • Apps shuts down automatically and safari froze

    when i use applications like werule , warchess, or others, apps just shut down automatically and shows the homescreen. is there a problem with the memory? or is this a normal behavior after using apps just for an hour and so? and when it happens safari won't do anything and froze. what do i do? should i restart the ipad whenever it happens

    You can shut down and restart your iPad to see if this helps.
    If not, you may want to reset the iPad and reinstall / resync it.
    If that still doesn't help, make an appointment with the expert bar at an apple store or call support for assistance.

  • Desktop shutting down automatically and unable to start up

    The computer will shut down automatically overnight and then it takes about 10 minutes of pressing the power button, unplugging the power lead from the PC, switching off and unplugging the power lead from the wall to be able to turn the computer on.
    We have had the computer for 4 weeks and this has happened 5 times.
    Any assistance would be appreciated. 

    I would not stand for that that type of PC behavior with a new PC.  Your PC is covered by warranty so you should contact HP Support.  Return the PC if you can as it might be a bigger issue than you think later on.
    HP's support number is 800-474-6836 or 800-HPINVENT or online here.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Last Wednesday my iPhone 4 shut down automatically and it wouldn't let me reboot for about a half an hour. It finally rebooted and then it started with the batterty drainage and no service, going in and out of service. What's wrong?

    Hi everyone... Last Wednesday my iPhone 4 shut down automatically... I had battery. It took about a half an hour to reboot it. After that I started having trouble with going in and out of service and battery drainage. I do have that update 5 ios... or whatever its called... but I did that about 2-3 months ago and had no problems. I called Apple and they wouldn't do a **** thing for me. I called AT&T and they reset the network... didn't work. I did a hard shut down and didn't work. Now today, every call I had was dropped. So of course this morning when I woke up at like 8:30 am by 10:30 am my battery went from 100% to 35%. ***. Can someone help me???

    Hi everyone... Last Wednesday my iPhone 4 shut down automatically... I had battery. It took about a half an hour to reboot it. After that I started having trouble with going in and out of service and battery drainage. I do have that update 5 ios... or whatever its called... but I did that about 2-3 months ago and had no problems. I called Apple and they wouldn't do a **** thing for me. I called AT&T and they reset the network... didn't work. I did a hard shut down and didn't work. Now today, every call I had was dropped. So of course this morning when I woke up at like 8:30 am by 10:30 am my battery went from 100% to 35%. ***. Can someone help me???

  • Imac power issue - randomly shuts down & won't turn on again

    Just wondering if anybody could help us with this issue as the Apple Genius's failed to...
    Our early 2006 Intel Imac has recently started to switch off at random times. There doesn't seem to be any particular point at which it will do this and no warning either. It's as if somebody has pulled the plug out but the power supply has not been touched! It then often won't allow you to switch it on again until you have left it over night - or sometimes it will switch on after a few minutes.
    It is very frustrating as you never know when it might happen, it has been ok for a couple of weeks but now it has done it twice in the last two days.
    We did take it to the Apple Store, who said they had kept it on for a day and could not replicate the issue so therefore there is nothing they can do...
    If anybody can shed any light on this mystery it would be VERY much appreciated.
    Thank you!

    Hello and welcome to the club of "random shut down".
    Since 8 days I am also having this problem on an early 2006 2 GHz intel core duo with OS 10.4.11 After approx. 5-10 minutes it shuts down and the only way to wake up again is to disconnect the plug, wait 10 sec and connect it again and push the start button on the back.
    There a many discussions ongoing and also many suggestions (SMC reset, memory replacement, change the power cord etc.). Nothing really worked in my situation. My assumption is something with overheating, but the widget "istatpro" or "tempmonitor" are showing not more than 35°C on the CPU at a max.
    I found a little tool called "smcFanControl" to adjust the minimum speed of the fans (my settings: ODD 2850 rpm, HDD 3150 and the CPU fan at 2160 rpm) and since that adjustment the working period seems to be much longer. Sure, there is an annoying noise now, but I can use the imac again.
    Hope that there will be a better solution soon.

  • I just got a SSD for my late 2011 mp but I don't know how to change it, can I seek help in the Apple store?

    I want to replace the HDD with SSD in my late 2011 Macbook pro, the question is I dont tools and knowledge about this job. So I am wondering if i can seek help from local Apple store?

    Good choice! I have one installed in my 13" MBP. The installation is not too difficult, but it is not trivial. I'm pretty experienced with this stuff so just take your time and carefully follow the instructions. You'll be working with tiny little screws that are easy to drop and/or lose. I suggest using magnetic tipped tools. There are a couple of screws in some tight areas that are a little difficult to remove.
    Be particularly careful to check all the snap-on cablings when you reassemble. There is one you don't remove during installation that is near the top part of the optical drive and covered over. When I was tugging on the drive to remove it I apparently popped the cable under the cover. Turned out it was for the WiFi and BT. I had to disassemble the back cover and look hard for something I couldn't see. I just happened to press on the covered area where the cable connected and heard the snap of it reconnecting. If it weren't for that I would have never figured out why my WiFi and BT stopped working!

  • When I turned my Macbook on and signed in, it has been shutting down automatically and restarting itself immediately after opening the desktop. The error message said, I'd shut down my computer unexpectedly. How can I get it to stop shutting down on me?

    Since downloading OS X Mavericks, my computer has been shutting down midway of starting up. Please help! The problem began after downloading the software free update. Now when I start my computer, it will starts up normal but when the desktop appears, there will be an error message that I shut down my computer because of an error and if I would like to open the applications that were open before the sudden shut down I should press continue. Then when I select continue, it will open up another communication window that my computer is restarting because of an error. Then the screen will revert to shutting down and restarting again. This has been going on now all morning. Can someone hlep me on how to resolve this issue?

    Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
    Do they launch OK while in Safe Mode?

  • My working iPod touch (5th gen) shuts down automatically and wouldn't start, was this iOS 8.1 related?

    My iPod screen went dark when I try to wake it, then the power button can't turn it back on either. I have the 16GB version, still got 7GB of usable memory but this was the first problem after installing the iOS 8.1. I don't think it was the battery, the battery icon that used to be visible when the system is off but it was not there when I tried to charge the battery. At this point, my 16GB iPod Touch and all the files inside are waiting for rescue.
    -San Diego, CA

    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable              
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • MacBook Pro shuts down automatically and better gets empty

    My Macbook Pro Mid 2010 is updated to OSX Yosemite shuts down all of a sudden and battery gets empty.
    After I recharge it for 10-15 minutes then it starts again.
    Is it a issue with the hardware or software?
    Thanks in Advance.

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
      If this does not help, contact Apple.
    Genius Bar reservation:

  • N 97 Hanging, shutting down automatically and rest...

    Hi i bought two N 97 three weeks ago one i have it which is working fine and other i send it to my brother. today he told me after using that phone for 3 days the phone is hanging then shutting down and restarting automatically. This have happened 50-60 times in 4-5days. Could anybody has same experience with his nokia N97 phone and the possible solution to this problem. waiting for your reply.

    The phone is prone to memory problems (lack of) and requires a lot of maintainance, if he has a lot of live widgets running on the homescreen and applications running in the background, this wouldn't help ! Would suggest you check out some of the threads for memory management out on the forum. Also check for software updates, remove anything you can from the C drive, store all messages and apps etc you can on E, and ensure you clear the cache in the browser on a regular basis.
    I have the phone and it is real hard work 
    If I have helped at all, a click on the White Star is always appreciated :
    you can also help others by marking 'accept as solution' 

  • Help! T400 shuts down automatically, and it's not over heated

    This T400 is 2 yrs old. It starts to shut down itself without any warning. I thought it's over heated, but all temp. monitor programs find it's not over heated. I can turn it on right after it shuts down.
    I also reinstalled the whole thing to facotry setting.But it still shuts down without warning.
    PLease help me figure this out. It's just out of warranty!

    Does it shutdown after doing something in particular or is random?
    Do you have the latest BIOS? http://download.lenovo.com/lenovo/content/ddfm/MIGR-72858.html#bios
    T400 6475-8Q5 | 8GB RAM | WXGA+ | Seagate 500GB 7200 | Win 7 Pro 64-bit............T61 7658-CTR | 8GB RAM | WD Black 320GB

  • I need help. My Firefox will not stop doing this even after i reinstalled. I will shut down firefox and when I open it back up it shows the previous website.

    Please Help. This is starting to anger me. I Reinstalled and everything.

    You should update your outdated Firefox 13.0.1 version to the current Firefox 17.0.1 release.
    I'm not sure what you mean.
    Do you mean that Firefox always opens the web pages that were open when you closed Firefox even if you set to open with the home page or a blank page?
    Make sure that Firefox closes properly and that there isn't a hanging Firefox or plugin-container process left in the task manager.
    *"Hang at exit": http://kb.mozillazine.org/Firefox_hangs
    *"Firefox hangs when you quit it": https://support.mozilla.org/kb/Firefox+hangs
    Use "Firefox/File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit") to close Firefox if you are currently doing that by clicking the close X on the title bar.
    You can check for problems with the sessionstore.js and sessionstore.bak files in the Firefox Profile Folder that store session data.
    Delete the sessionstore.js file and possible sessionstore-##.js files with a number and sessionstore.bak in the Firefox Profile Folder.
    *Help > Troubleshooting Information > Profile Directory: Open Containing Folder
    Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).

  • Iphone shutting down automatically and asking to connect to itunes and showing i a recovery mode.

    This Is Mahesh Kumar Goud.I am using Apple Iphone5 and i have a problem with the phone that is always it shows connect to itunes and showing in a recovery mode.
    But i am unable it recovery my iphone and it is showing the error as "3194". So kindly help me out to get out from this problem.
    Looking forward to hear from you soon.
    Mahesh Goud

    Try the troubleshooting for that error message on this page : http://support.apple.com/kb/ts4451

  • HELP!!! When I empty my trash, my MBP will shut down automatically and a screen saying press a button to restart your MBP.. What's wrong with it?

    As stated above, I don't know what to do, but there's an error report that popped up... Anyone can help? =)
    Interval Since Last Panic Report:  11 sec
    Panics Since Last Report:          2
    Anonymous UUID:                    F5A6263F-7726-ACD7-A59A-817B526A9AA7
    Tue Jul  9 19:37:35 2013
    panic(cpu 2 caller 0xffffff802a4b8655): Kernel trap at 0xffffff7fac20d5db, type 14=page fault, registers:
    CR0: 0x0000000080010033, CR2: 0x0000000000000040, CR3: 0x0000000074b13019, CR4: 0x00000000000606e0
    RAX: 0xffffff80a99ed1a4, RBX: 0x0000000000000000, RCX: 0x0000000000000000, RDX: 0xffffff8038440004
    RSP: 0xffffff80a8e4b800, RBP: 0xffffff80a8e4b850, RSI: 0xffffff80a99ed194, RDI: 0xffffff8035fb4404
    R8:  0xffffff803c760f64, R9:  0xffffff803c760f64, R10: 0xffffff802aa65570, R11: 0xffffff80371ca680
    R12: 0xffffff803a295104, R13: 0xffffff8035fb4404, R14: 0x0000000000000000, R15: 0xffffff8038440004
    RFL: 0x0000000000010297, RIP: 0xffffff7fac20d5db, CS:  0x0000000000000008, SS:  0x0000000000000010
    Fault CR2: 0x0000000000000040, Error code: 0x0000000000000000, Fault CPU: 0x2
    Backtrace (CPU 2), Frame : Return Address
    0xffffff80a8e4b4a0 : 0xffffff802a41d626
    0xffffff80a8e4b510 : 0xffffff802a4b8655
    0xffffff80a8e4b6e0 : 0xffffff802a4ce17d
    0xffffff80a8e4b700 : 0xffffff7fac20d5db
    0xffffff80a8e4b850 : 0xffffff7fac209d70
    0xffffff80a8e4b8a0 : 0xffffff7fac1fe4f3
    0xffffff80a8e4bb30 : 0xffffff7fac202665
    0xffffff80a8e4bb70 : 0xffffff802a513089
    0xffffff80a8e4bbd0 : 0xffffff802a5010dd
    0xffffff80a8e4bf50 : 0xffffff802a7e16aa
    0xffffff80a8e4bfb0 : 0xffffff802a4ce9c3
          Kernel Extensions in backtrace:
             com.paragon-software.filesystems.ntfs(82.0)[D28EF3F5-8EBC-709B-594E-B32FFC8C200 2]@0xffffff7fac1fc000->0xffffff7fac23ffff
    BSD process name corresponding to current thread: Locum
    Mac OS version:
    Kernel version:
    Darwin Kernel Version 12.4.0: Wed May  1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64
    Kernel UUID: 896CB1E3-AB79-3DF1-B595-549DFFDF3D36
    Kernel slide:     0x000000002a200000
    Kernel text base: 0xffffff802a400000
    System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
    System uptime in nanoseconds: 139233137230
    last loaded kext at 99385836295: com.paragon-software.filesystems.ntfs          82 (addr 0xffffff7fac1fc000, size 278528)
    loaded kexts:
    com.paragon-software.filesystems.ntfs          82
    net.telestream.driver.TelestreamAudio          1.0.5
    com.LivestreamProcaster.driver.ProcasterAudioRedirector          2.0.0
    com.apple.driver.AppleHWSensor          1.9.5d0
    com.apple.iokit.IOBluetoothSerialManager          4.1.4f2
    com.apple.driver.AppleTyMCEDriver          1.0.2d2
    com.apple.driver.AGPM          100.12.87
    com.apple.driver.AppleMikeyHIDDriver          122
    com.apple.filesystems.autofs          3.0
    com.apple.driver.AppleHDAHardwareConfigDriver          2.3.7fc4
    com.apple.driver.AppleHDA          2.3.7fc4
    com.apple.driver.AudioAUUC          1.60
    com.apple.driver.AppleUpstreamUserClient          3.5.10
    com.apple.driver.AppleMikeyDriver          2.3.7fc4
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.iokit.IOBluetoothUSBDFU          4.1.4f2
    com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.1.4f2
    com.apple.driver.AppleIntelHD3000Graphics          8.1.2
    com.apple.driver.AppleBacklight          170.2.5
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AppleSMCPDRC          1.0.0
    com.apple.driver.AppleSMCLMU          2.0.3d0
    com.apple.driver.AppleIntelSNBGraphicsFB          8.1.2
    com.apple.driver.AppleLPC          1.6.0
    com.apple.driver.ApplePolicyControl          3.4

    com.paragon-software.filesystems.ntfs is causing this panic. Contact paragon-software.com for an updated version of their software.

Maybe you are looking for

  • CRT monitor to add on

    I have a flat scrn and now an additional CRT monitor to add on to my G5 to have a larger desktop to work with. Where do I start? How do I know if an ADC-VGA adaptor will work? And how do I set it up ? Thanks, Ed

  • No batch split performed for delivery, instead 2 items

    Hi, I have batch managed materials and during creation of the delivery, the system does not create a batch split, instead it created 2 seperate line items for each batch. This is causing problems during EDI invoicing (intracompany): the same item mul

  • The most frustrating software i have ever used.

    I am getting an error message "The localized resource files for this application could not be loaded.  Please reinstall or repair the application and try again.  This I have been doing since 9:00 a.m. this morning.  I purchased the Student version of

  • CS6 crashes trying to export to PDF interactive

    I am trying to export a file from CS6 to a PDF interactive file. Every time I try CS6 crashes and I can't figure out why considering the pre-flight check says everything is ok. I am running Windows 7

  • How to generate Payroll Posting

    Hi All   I’m facing problem in generating payroll posting IDoc to send to FI System. Payroll was run for all employees in a payroll Area. I released the document, but still the payroll posting IDoc is not generated when we look using WE02. Hope I hav