Hi all! anyone else NOT had problems with the update?

hi well after hearing bad things about this update i was rather worried thinking it wouldnt work, or it would crash or lose everything, ok so ive lost my apps but i can drag and drop them back in (i hope ) touch wood apart from that it worked a treat

I Have tried cleaning the port, got some lint out an I thought that would of helped but its doing it even more, I'd say every 10-20 seconds or so, it happens less when I actually plug it in though to my lightening to USB cable, it is charging really fast though, I just plugged it in then an it went from 20% battery to  37%  in under 10 mins, I'm pretty sure if I unplugged it an started using it I'd probably lose it just have fast too, any other suggestions? Thanks in advance.

Similar Messages

  • HT4113 anyone else have a problem with the iphone 4s locking and not able to unlock even though you keep entering the only code that you have used?

    Anyone else having a problem with the iphone4s locking and not letting you in even though you keep using the only code you have entered from the begginning?

    No. You are the first person out of 900 million users to have this problem.

  • EOS 7D Mark II - Has anyone else experienced compatibility problems with the Tamron SP 70-300MM?

    Has anyone else experienced compatibility problems with the Tamron SP 70-300MM?

    Is the lensora report based on actual testing... or merely theoretical?
    I'm wondering ... because there's a well-established history of 3rd party lenses that should be compatible based on the mount, but have problems anyway when a new camera model is introduced that did not exist when the lens was designed.
    At the same time, if you contact the lens vendor for support, they may be able to provide better data and sometimes they can re-chip or re-flash firmware into the lens to upgrade it to a compatible state.
    Tim Campbell
    5D II, 5D III, 60Da

  • Is anyone else having a problem with the iPhone 4s Battery Life?  My 1 year old Iphone 4, which I gave to my wife, is holding a charge better and she has been using it far more than I've been using my 4s

    My wife preordered a white iPhone 4s for our anniversary and even though it is preloaded with the ios 5, i am a little disappointed.  The battery doesn't seem to hold a charge well at all. I have had every other iphone except the 3gs and have never had such a poor battery life.  I owned the iPhone 4 for a year, and already know all the tricks to hold on to battery life, I have adopted the habit of closing out any apps that weren't being used, my mail push notifications are set for hourly, wifi and bluetooth are turned off when they aren't needed.  I also stay away from any car chargers, use only the apple brand supplied cables, and only charge when the phone is dead.  I only would sync when the phone was about to die as well. 
    When I saw how fast I was burning through the battery, I turned off Siri, which is kind of the purpose of the new iPhone, and turned off the backing up to iCloud.  I barely used my phone today and the battery kept ticking down.  My wife, who has been stuck with an iPhone 3g for years, has been fascinated with my old iPhone 4 and has been browsing and playing games and her battery has been holding a better charge than my new phone.  I even tried turning the phone off for an hour when it was at 18% and when I turned it back on, it was at 15%. My iPhone 2, which is only being used as a touch iPod now, still has better standby time than a brand new iPhone 4s. 
    To be honest, I am usually a heavy phone user.  Throughout the day I will make and receive at least 50 calls, I browse and check websites daily and watch videos sometimes during my downtime.  But this weekend, I haven't even had the chance to put this phone through the same abuse my other 3 iPhones have had to endure. 
    I just want to know if anyone else has this problem, or if I should just return this one.   

    I had major issues with the iPhone 4s battery, however it’s resolved.
    The tech who set the phone up at the Apple store did so with little training.
    if you have a mobile me account. First go and move all your data to the cloud by going on your computer and logging in at me.com/move. The cloud has replaced mobile me, so there is no need for those two accounts
    Also make sure that for any of your email accounts you set them up to fetch, not push. My tech person set them all to have the email servers push data to the phone. The new iphone4s antenna is extremely strong so it will continually try to access stuff that is pushed–***** a lot of battery life doing this. It makes it worse if you have exchange 2010 accounts. Something about changes made to exchange really suck battery life from devices that access such accounts.
    turning of locator and the push notifications from facebook--they have a lot!

  • Is anyone else having majors problems with latest update?!?

    I love my Droid X and have never had problems with it until now.  My phone had been pestering me about the update so I finally let it.  Then I didn't like the look of the main screen, but I liked the index down the side of the contacts and the new keyboard when texting (except the smiley face was missing).  But then I started noticing problems, I can't move my contacts to groups and I can't take pictures.  I have a constant notification that says 'Blank SD card SD card blank or has unsupported filesystem" and when I try to take a picture I get a message that says "Please insert sd card before using the camera".  Is there any way to remove the update without erasing everything on my phone?  I'm really not happy with Verizon giving us an update with these kinds of problems.  I want a new update asap that undoes the last one.  

    mortb wrote:
    Sorry, you can't go backwards. However, it appears that you might have a bad SD card. If your computer can read cards, check it out. If not, go to your VZ store and have them check out your SD card. If your card is bad, that is what might be causing you all your headaches.
    The store will DO NOTHING for you if you are getting a message saying your SD card is having problems, so don't even go there as they will pretty much tell you that you are out of luck - VZW's official stance on the SD card issue is that it is not their problem. You're better off going and buying your very own SD card, althoug these will have problems also
    I started having problems with my SD card when the GB update came out back in August....the original SD card the phone came with completely corrupted, I bought a new card of my very own (since both 800 support and the VZW pretty much told me I was out of luck and laughed me out the door), which had problems as well, getting a message in both late August and mid-Sept that the card had problems and to reformat it. I seriously believe the phone itself, if not the update, is causing problems with the SD card. SD cards don't have problems like this....yes they fail just like anything else, but to have had one card go corrupt and another one give a damaged message all within a months time? Sorry that's not the cards....

  • Anyone else having WiFi problems with the IPod Touch 5th Generation?

    I upgraded my old IPod Touch 3rd Generation to a 5th Generation yesterday. I've noticed however that for some reason the wi-fi connection on the 5th Generation drops off all of a sudden for no reason at all and I can't figure out why. Anyone else having similar problems? If so what did you do?

    Does the iPod connect OK to other networks?
    Does the iPod see the network?
    Any error messages?
    Do other devices now connect OK?
    Did the iPod connect before?
    If only your network then it could be a problem with your network
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Anyone else have this problem with the iPhone 3G S?

    i have a iPhone 3G S white 32 gb abd the sleep button does not work. have tried all kinds of restarts and restores. so I'm just wondering if anyone else has this problem? (getting it replaced by Apple.)

    The sleep button is hardware - if that ain't working, an Apple replacement is definitely the way to go.

  • Anyone else having this problem with the iPod Touch 5g?

    I just got the iPod Touch 5g tonight, and I love it, however I have this one little issue with it. Here's a picture of it. As you can see, the app I'm using isn't taking up the entire screen. Is anyone else having this problem? Is this something that needs to be fixed with an update for the app? Several of my apps do this.

    The app isn't optimized for the larger screen. You just need to wait for them to update the app.

  • Anyone else have a problem with the charging plug catching on the aluminum backplate?

    Relatively new Ipad - after charging the unit, disconnected the charging plug and it caught on the backplate.  Anyone else have this problem?

    This problem arose today.  When I removed the plug, the plug pulled on the Ipad2, specifically the thin aluminum strip between the plug's receptical and the Ipad2's front.  No functional damage...the unit still works and charges, but now that thin aluminum strip is displaced.  The plug itself appears to be the culprit.  Looking at the plug that connects to the Ipad2 (the side with the graphic), there are 2 areas which I presume provides tension when the plug is inserted into the unit.  One of those areas is displaced, and became caught with the thin aluminum strip during the plug's removal.  

  • I'm wondering if anyone else has had problems with their imac fans being extremely loud when running at slow speeds?  When the computer heats up enough for the fans to run at higher speeds they quiet down. New HD fan was just installed.

    I have an imac that I've had for a couple years.  The fans have always been loud when running at the slower speeds.  When the computer heats up enough for the fans to run at a higher speed the fans quiet down.  I had installed SMC fan control after multiple attempts with Apple to get the fan issue resolved.  That seemed to keep the fans quiet enough.  I've never had a problem with overheating.  Recently the fans were becoming loud again even running at the slightly higher speeds so I took it to my local Apple store and they replaced the hard drive fan.  I got it back and it's now as loud or louder than ever!!  And, now SMC fan control won't "stick."  The fans will speed up, but then gradually go back to the lower "loud" levels.  I'm at a loss as to what to do next. 

    Thanks jared,
    I'm still dealing with this issue through Apple. Some time after I posted this, I contacted Apple again. They did start a case up for me, as I was experiencing the same behavior on two different machines, with two different versions of Windows.
    So far it remains unsolved. I've logged iClouds for Windows on my desktop, which is brand new, then logged for awhile after completely uninstalling Norton Security Suite, depending on the Microsoft security for some time, and finally logged after I uninstalled iCloud for Windows, restarted, installed a clean download, and connected using a completely different test account, which Apple set up for me. None of this made any difference. Looking at the logs, it seems every 10 minutes, iCloudServices.exe creates a new TCP connection to confirm I'm using less than 5GB on iCloud, (which I am by a good margin, using less than 2GB), it seems this connection is not closed, and when the next iteration rolls around 10 minutes later, a new TCP connection is created. I come very close to having 6 TCP connections created per hour, until I restart my computer. This works out to... 6 x 24 = 144/day.
    Perhaps the article you posted will shed some further light on this. I'm thinking seeing the state of the connection through netstats, at the least, could help.
    For the last week, I've been putting a hold on further logging, as Apple wants me to create a new user account on one of my computers, install iCloud for Windows there, and log it running in the other account. This however basically means I cannot use my computer for a fair number of hours, and I've been busy enough with work the past week that I haven't the time or energy to afford to set this up and run it. I've had need of my computers too much for the past week.

  • Does anyone else have this problem with the new up...

    in order for me to dial or use the keypad, i have to press the end key before dialing any numbers and then to remove the numbers and the dialing bar, i have to clear all the numbers manually by press the C button then i can press the end key to take off the dialing bar. another problem i have is that when i put my profile on silent, the phone doesn't vibrate the screen and lights only flash like they normally do. has anyone else had this problem? im guessing there are more flaws with the new update but im still looking into it.

    someone help meee!!!

  • Does anyone else have this problem with the iTunes visualizer?

    I rarely use the iTunes visualizer but, when I do, it gives me the option of either using the newer one or the classic one. I like to use the new one but the problem is that I can only go to "visualizer options" if I am using the classic one. In said options I could set it so that the song info (song title, artist, album title and artwork) stays in the bottom left corner for the entire song. The few times I use the visualizer, I do like to have it up for the whole song--I just think it looks cool, I don't know...
    Anyway, since I can't get the options for the new visualizer, the song info always fades away after the first five seconds or so of the song.
    Anyone else realize this?? And does it annoy anyone else lol?

    Well, I did a search on apple.com and found this:
    http://www.apple.com/itunes/itunes-news/2010/04/the-hidden-itunes-visualizer-con trols.html
    "The Visualizer -- graphics that swoop and pulse with the music -- has been part of iTunes' DNA from the beginning. And because its creators wanted to interact with the graphics in real time as well as watch them, Visualizer includes some single keystroke commands that change what you see while it runs. But these commands are hidden by default lest they obstruct the graphics.
    Use the Show/Hide Visualizer command in the View menu to turn Visualizer on and off, and use the Visualizer menu to select among the choices. If the choice you're using has hidden commands you can see them for a brief time by typing ? while a song is playing and Visualizer is visible. The keystrokes will work regardless of whether the help menu is showing, so if you memorize them it's possible to add Virtuoso Visualizer Player to your list of accomplishments. (For the Visualizer choice called Jelly, available only in iTunes for Mac, try holding the keys down, especially the number keys, for maximum effect.")
    Not that you care. >.<

  • Re: Has anyone else been experiencing problems with the GPS on their galaxy s3?

    I have the same problem and this update ruined my vacation. I feel like Verizon it's just trying to extort money from us by making us get new phones. How about a fix Verizon, this is getting old

    Safe mode does not fix the gps problem. All location services are on. High accuracy is on. Gps will not lock on and google maps and Waze no longer work. I was using Waze for my daily commute but now it will no longer find a lock.  I have cleared the system cache and reset the phone. That did not work. Verizon, you will fix this at you expense. I did not ask for this upgrade and kept putting it off until one morning out was installed. When Russian hackers disable features on our devices and demand money this is called extortion. I have already been told by Verizon phone support to buy a new phone or pay to get this fixed.

  • Anyone else having/had trouble with the 'this cable or accessory is not certified...' Messaging popping in continuously when you haven't got a cable plugged in?

    "cable or accessory not certified" popping up when nothings connected to the iPhone?

    I Have tried cleaning the port, got some lint out an I thought that would of helped but its doing it even more, I'd say every 10-20 seconds or so, it happens less when I actually plug it in though to my lightening to USB cable, it is charging really fast though, I just plugged it in then an it went from 20% battery to  37%  in under 10 mins, I'm pretty sure if I unplugged it an started using it I'd probably lose it just have fast too, any other suggestions? Thanks in advance.

  • HT202157 Does anyone else have a problem with the latest Apple TV update?  My Apple TV no longer can load movies from my iTunes library, including ones I've already watched or were watching.  Can I roll back this update, and if so, how?

    After updating my Apple TV, it will no longer load movies from my iTunes library.  Music works, but no movies.  I've turned this puppy every which way but loose, but no joy.  Is there a way to roll back an update?

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

Maybe you are looking for

  • Local documentation for coldfusion 9

    Hi, I have recently installed a 30 day evaluation copy coldfusion 9 on a RHEL5 64 bit linux server  and we are waiting for a purchase to get a registration code... I cannot see any option for local documentation. The "Documentation" link takes me to

  • Integration with Restful webservice i..e Request details

    Dear Experts, After going through several blogs and attempting in system , I am not really convinced with the way my results are shaping up. There are 2 systems SAP ABAP portal and JAVA portal. I am having a scenario when any user logs in ABAP web dy

  • BRIDGE: The operation could not be completed

    I am using Creative Cloud, I have successfully installed diffetents App`s. PS,AI etc. When I install Bridge and open the app like any other app a error pop`s up. !! the operation could not be completed. It a brand new mac, so not a space issue. If an

  • Using Zoom R16 as Controller for Garageband not good so far, Help!!!

    I can only record one channel, meaning I just have one earphone or speaker working where I should hear both, even in mono. The phones and speakers work fine. I have checked the pan on the R16. I read a similar problem in another post and the answer w

  • Which download for wireless development?

    I've found a J2ME , j2ME wireless toolkit, KVM, CDLC, MIDP for Palm OS downloads. I'm confused about which one to use. I've trying to develop for a Palm Vx, and plan to use prc files. I've already installed the jdk 1.3.1. What else do I need to insta