Hi all, how to check the second copy in the smartform

HI all,
I must print the text 'Duplicate Copy' in the second time printing document in the smarrform, i how can i check whether the pages that are given for printing and which one is the first copy of printing and which one is the second copy of printing.
Can any one give the answer for this.
Thanks,
Ravi Kumar

Hi Ravi,
 You have to make use of Alternative node. Keeping your window name selected, right click, Create -> Flow Logic -> Alternative.
%CONDITION will be created under the window. In this %CONDITION, General Attributes tab, give

Field Name Comparison Value
SFSY-COPYCOUNT = 2

Under %CONDITION1, under True, create a text (%text1) node, in that write Duplicate Copy. This text Duplicate Copy will only be printed if you take the printout for the second time.
Hope it helps!
Regards,
Abdul
P.S: Reward points, if useful!

Similar Messages

HT201229 I received an unsolicited message from a phone number which I now learn is a trap. I deleted the message and the second copy of the same without replying - there is a suggestion that you ca stop it by replying STOP but messages on the web say thi

Hello
I received an unsolicited message from a phone number. I deleted it.
A second copy arrived and I deleted that too.
The message says send STOP as a reply and it will be stopped but the web says this is a way to give the sender access to your account and they will charge you £3 every time.
Did i do right to delete it?
How can I block a number? The system on my iPhone iiOS 8 and Mac Yosemite will not allow it.
How can I change my status (as I do on Skype) to stop these messages safely?
Anythoughts?
"Applemany"

Why not using ASP?
If on your webpage you have some buttons that runs at server, the server can create a web Client and using your IP address retrieved from the cession, communicate with your application (that will act as web Server).
then the web client on the web server can send request to your VB application and read a stream as response.
This web client being control by the buttons on the web page, gives you complete control over what and when the data is sent
This way you will have a complete control over the VB application from the web page.
I am not saying that the way you want to do it cannot work, ... but it seems more complicated

How do I obtain a copy of the discontinued iDVD software?

I need a to purchase iDVD but have learned that Apple has discontinurd the software. I know it works on 10.8 because I have seen it on a new MacBook Bro 17".
The question is: How do I obtain a copy of the discontinued iDVD software?

On an iLife 08 or newer DVD.
He's referring to the boxed disk for iLife 08, 09 or 11. All contain iDVD 7. You can the iLife 11 disc here: Amazon.com: iLife 11 (assuming you're in the States). Otherwise check the Amazon.com for your location.
OT

I imported a video I make in another program and I played it back in the video editor and I like the pan and zoom that was added by the program how do I save a copy with the effect of Premiere elements 12

I imported a video I make in movie maker program and I played it back in the premiere video editor and I like the pan and zoom that was added by the program how do I save a copy with the effect of Premiere elements 12
all I did was played it back how do I save that and make a new version of the video beacause when I save a copy the effect look I was trying to save was not there.
Rodney
[personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
[This is an open forum, not Adobe support, please do not post personal information]
[If you are posting using email, please turn your 'sig file' function OFF for posting]

silkman1
I would be glad for the opportunity to customize a Premiere Elements 12 answer to your Premiere Elements 12 issue.
But, I want to make sure that we are together on the details. This is my understanding of what you have written. Please review and let me
know if I am misinterpreting anything that you have written.
You have a video created in Windows Movie Maker.
How did you output the video from Windows Movie Maker...wmv or mp4, what was the frame size and frame rate of that export?
Next you import that video into Premiere Elements 12 (can we assume that this is on Windows 7, 8, or 8.1 64 bit?)
From what you wrote, you have applied a pan and zoom effect to your video in Premiere Elements.
Now you go to export the Premiere Elements 12 Timeline content with your video with the pan and zoom applied.
But, the pan and zoom effect is not seen in playback of the export.
Is all of the above correct so far?
If so....we are going to need some more details from you...
a. What is the project preset that you or the project are setting to match the properties of the video coming from Movie maker? See Edit Menu/Project Settings/General and the readings for Editing Mode, Timebase, Frame Rate, and Pixel Aspect Ratio even if the fields look grayed out.
b. Are you applying the pan and zoom effect with the Pan and Zoom Tool, fx Effects Presets, or keyframing the Scale (for Zoom) and
Position (for Pan) in the Motion Panel expanded?
c. What are you selecting as your export in Publish+Share/. Please give details...are you using default settings or customizing the export
setting under the Advanced Button/Video Tab and Audio Tab of the preset selected?
I am suspecting some sort of mismatch of your project settings or some problems with working with the Pan and Zoom tool. I need
your answers to help me help you. If I have written anything that you do not understand, please let me know. I will re-write if necessary
so that we are in sync to resolve the issue.
Thanks.
ATR

HT204318 Copied my iTunes from my Mac to my Windows 7 laptop, now there are thousands of songs missing on the Windows copy with the exclamation point. everything shows up, playlists and tracks, there are just a bunch of songs with exclamation points. how

Copied my iTunes from my Mac to my Windows 7 laptop, now there are thousands of songs missing on the Windows copy with the exclamation point. everything shows up, playlists and tracks, there are just a bunch of songs with exclamation points. how can i properly sync my iTunes from my Mac to my PC? using iTunes

nope all my songs are copied and organized into the iTunes library.

How can I log into two differant accounts at the same time in two windows without the second window affecting the first.

I'm trying to log into two facebook accounts at the same time in differant windows. When ever I log into the second account in the second window it changes the login in the first window. When I hit home or any other link the first window account has been logged out and logged into the second window account. I tried installing a second copy of firefox in a differant folder that the first but it seems to use all the files of the first installation. If I can get 2 toatally seperated instalations that don't rely on the same history, cookies, cache, etc I belive that will solve my problem. Please help.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; OfficeLiveConnector.1.4; OfficeLivePatch.1.3)

Nah, that won't work. Facebook has a feature that gets your IP Address, so as soon as you sign into one on the same computer, it changes the other login for safety purposes (say, someone was on a public library PC. They forgot to log out. Someone else logs in, and it automatically logs them out). You'll need 2 computers to do that.

How to call the second mapping in the first mapping fails in the BPM

Hi All,
I have a scenario like this.
There are two mappings. There is a one condition while genearying the root element of the first mapping. If this condition is not satisfies the first mapping will fail. If this mapping fails i want to trigger another mapping.
How to achieve this functionality.
If it is possible with BPM. how to call the second mapping in the BPM.

Hi
you can not create the containter for the synchronous interfaces.
you have to craete the two asysnchronous abstact interfaces .
thenusing those two abstract interfaces you have to define the containers in the BPM.
and you also have to define the interface mapping b/w those two abstract interfaces.
once you define the interface mapping you will be able to select the interface mapping using the transformation step in BPM.
once you select the interface mapping in BPM then you will be able to selece the interfaces
if you still face the problenm please reply me back.
Thanks
Rinku Gangwnau

Light room five keeps crashing my computer uninstalled it downloaded a fresh copy it works fine how do I get my pictures out of the old copy to the new one?

Light room five keeps crashing my computer, uninstalled it downloaded a fresh copy it works fine. How do I get my pictures out of the old copy to the new one?

Apparently you have two catalogs now, one from each installation. If you did importing, tagging and editing during the first installation, that will all be in the first catalog. Find the first catalog - it is a file with the suffix .lrcat and the default place for LR to put it is usually your Pictures folder - and (with LR closed) double-click on it. LR will launch with catalog #1 active.

How does the local copy of the universes work?

To whom it may concern:
We are using BO 6.5.1.Normally the local copy of the used universes will be updated from the repository when we open BO documents and select universes. However, recently we found that this "update" sometimes failed and cause an message windows full of garbage messages. We have to delete the universe we used under "C:\Documents and Settings\53170\Application Data\Business Objects\Business Objects 6.0\universes" and, then, the "update" resumes.
Please provide me with the knowledge about how the local copy of universes updates? And, how to avoid the above problem? Thank you!
Antonio

Hi Yun,
Following information might help you to resolve the issue.
Whenever you alter and export the universe to the repository, Business Objects does not automatically update the local copies of the universes on each machine.
Only when the users access to the same (altered) universe next time or makes a report from that universe from there local machine, then Business Objects first compares the altered universe with that of old universe (local copy) stored in the machine, only then Business Objects imports the altered universe in the useru2019s machine or replaces the old copy with the altered one.
Solution:
In BusinessObjects, click on Tools > Options > General tab. Place a check in the box to 'Automatically import universes'.
End users will now import the updated copy of the universe whenever they open the report.
Regards,
Sarbhjeet Kaur

How do I delete duplicate songs, but keep a link in their original albums to the single copy of the song left, so it will play in each album in sequence as if it were still there?

Greetings!
After importing my 300 or so CDs into iTunes, I found I have tons of duplicate songs.
Example: I have a song that came in a original album, then in again in a "Greatest Hits" album, then again in a "Hits of the 80's" album, and again in a soundtrack album. I have now have 4 copies of the exact same song.
How do I delete duplicate songs, but keep a link in their original albums back to the single copy of the song left, so it will play in each album in sequence as if it were still there?
I don't think this currently exists, but as my library keeps growing the duplicates keep growing. It would be nice if Apple sees this and adds a way to link songs to multiple albums.
I don't want to create a custom playlist for every album that has a duplicate song or two (I'd have dozens of playlists) - thought about fixing it that way but not really practical.

To my knowledge, there is no way of doing what you want. The only workaround is to create playlists for the other albums containing the track, but that isn't practical for most people.
You could provide Apple with feedback here: http://www.apple.com/feedback/itunesapp.html

The computer I use at work is a PC. I know you are allowed to install the programs on two computers, one work computer and one laptop. My laptop is a Mac. Is it possible to install the second copy on a Mac?

I'm not sure if I'm in the right forum for this question, but I don't know where else to ask about installing on cross platforms. So, the computer I use at work is a PC. I know you are allowed to install the programs on two computers, one work computer and one laptop. My laptop is a Mac. Is it possible to install the second copy on a Mac?

Which Adobe product exactly?
Cloud: yes.
Creative Suite: no.

On my iPod touch, in my music library, I have 2 tracks of the same song on a few of the albums. How do I delete the second track of the song?

On my iPod touch, in my music library, I have 2 tracks of the same song on a few of the albums. How do I delete the second track of the same song?

Hey glocster,
Thanks for using Apple Support Communities.
Looks like you have a song you want to remove from your iPod. This article tells you how to delete content from a lot of places.
How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
http://support.apple.com/kb/HT5772
iPhone, iPad, or iPod touch
Tap the Music app.
Tap the Songs category.
Swipe left over the song you want to delete.
Tap Delete.
Have a nice day,
Mario

How to check my job name from the database...

I have written one job scheduler which is as follows :
SQL> ED
Wrote file afiedt.buf
1 DECLARE
2 X NUMBER;
3 JobNumber NUMBER;
4 BEGIN
5 SYS.DBMS_JOB.SUBMIT
6 (
7 job => X
8 ,what => 'scott.SPLITSMS;'
9 ,next_date => SYSDATE+1/1440
10 ,interval => 'SYSDATE+1/1440 '
11 ,no_parse => FALSE
12 );
13 JobNumber := to_char(X);
14* END;
15 /
PL/SQL procedure successfully completed.
Now I want to check whether the job has been really created or not?
so for that I have used the following command line:
SQL> SELECT JOB_NAME FROM DBA_SCHEDULER_JOBS WHERE JOB_NAME = 'SCOTT.SPLITSMS';
SELECT JOB_NAME FROM DBA_SCHEDULER_JOBS WHERE JOB_NAME = 'SCOTT.SPLITSMS'
ERROR at line 1:
ORA-00942: table or view does not exist
how to check my job name from the database...
what is the command used to check the job_name ????
and how can i ensure that my job scheduler is running properly...???
please help ........my dear friends.....!

957029 wrote:
Now I want to check whether the job has been really created or not?
so for that I have used the following command line:
SQL> SELECT JOB_NAME FROM DBA_SCHEDULER_JOBS WHERE JOB_NAME = 'SCOTT.SPLITSMS';
SELECT JOB_NAME FROM DBA_SCHEDULER_JOBS WHERE JOB_NAME = 'SCOTT.SPLITSMS'
ERROR at line 1:
ORA-00942: table or view does not existYou can use DBA_* views only if the User has been Granted a DBA Privilege.
how to check my job name from the database...
what is the command used to check the job_name ????You can use USER_JOBS view to check. But, is it not that you have just created the Job, so you must be knowing it?
and how can i ensure that my job scheduler is running properly...???If USER_JOBS.FAILURES is Non Zero, that means the Job has encountered a problem that needs to be Investigated. Similarly, the LAST_DATE, LAST_SEC, NEXT_DAY, NEXT_SEC can be used to determine if the Job has been running successfully.
if you are on 11g, you should consider using DBMS_SCHEDULER.

How to make a hard copy of the OS mountain lion that i downloaded

How to make a hard copy of the file ofthe OS mountain lion downloaded from apple

Follow the directions in this link to make a Mt. Lion USB thumb drive:
http://www.macworld.com/article/1167857/how_to_make_a_bootable_mountain_lion_ins tall_drive.html
Ciao.

How do I open files from an external drive? It's plugged into the second slot to the end.

How do I open files from an external drive? It's plugged into the second slot to the end. Did I plug it into the right place and how do I find the drive when trying to attach a file in an email?

Files on an external hard drive open just like files on the internal drive - but I get the idea that you are having a problem just finding and seeing those files. Is that correct?
What operating system is running on your MacBook?

Hi all, how to check the second copy in the smartform

Similar Messages

Maybe you are looking for