Hi all, i'm new and facing a problem while creating a new file for Xcode. I can't select the box "with XIB for user interface" if the subclass is "UIViewController".this problem happen after i upgrade Xcode to 4.6 version.Appreciate for any help rendered.

Hi all, i'm new to Mac book & Xcode. I'm learning and facing problems while creating a new file for Xcode. Before i upgrade the software, i have no issue to create simple steps in apps. After upgrade Xcode to 4.6 version, i'm facing lot's of issue eg.
1) "the identity "iphone developer" doesn't match any valid certificate/ private key pair",
2) can't select the box "with XIB for user interface" if the subclass is "UIViewController"..
Appreciate for any help rendered.

Mikko777 wrote:So what is the best?
I wouldn't judge. I've been to Arch for a week, you know? But as said, it's VERY close to it.
What I dislike after a week is makepkg not handling dependencies automatically (which would be overhead, so probably not appropriate).
Mikko777 wrote:Also theres KDEmod for modular kde, dunno if its for 64 bits tho.
Don't actually need that as said ... I see no real benefit of having that other than not beeing a KDE user or having Gentoos useflags.
Mikko777 wrote:PS:You produce a lot of text and welcome smile
Yeah. Wonder why I'm still employed? So do I ...

Similar Messages

The mail app on my Mac laptop will not open. This began happening after an upgrade during which "Security UPdate 2012-004" was installed. My mail app has a new icon, and I think i trashed the old program (trying to follow directions). Suggest a fix?

The mail app on my Mac laptop will not open. This began happening after an upgrade during which "Security UPdate 2012-004" was installed. My mail app has a new icon, and I think i trashed the old program (trying to follow directions). Suggest a fix?

See possible fixes here.
https://discussions.apple.com/message/19760703#19760703
https://discussions.apple.com/thread/4311280?tstart=0

I accidentally threw away the box with my serial number before registering the product. I am new to adobe so I didn't realize I would need it. Is there a way to track down my number?

I accidentally threw away the box with my serial number before registering the product. I am new to adobe so I didn't realize I would need it. Is there a way to track down my number?

Barbara B. wrote:
There is one faint glimmer of light. Depending on where you bought PSE you might have gotten a redemption code rather than a serial number. If you didn't also throw away your receipt, check that for a code. Then go here, if you find one:
Redemption Code Help
But otherwise, I'm afraid you are out of luck, sorry.
Barbara,
It has been months since I visited here. Your patience is still intact! I have your wonderful PSE 11 book on my Kindle now. Thanks for the good work.

Problem while creating a new user on solaris

I have a SUN ultra machine. Solaris 2.6 is installed on this machine.
I have successfully created a new user in this machine using "admintool"
Problem is I'm getting error messages when I'm trying to update NIS DATABASE.
I'm doing-
#cd /var/yp
#/usr/ccs/bin/make
and the response is----
updated passwd
pushed passwd
make:Warning:Don't know how to make target /etc/ethers
Current working directory /var/yp
make:Warning:Don't know how to make target /etc/netgroup
Current working directory /var/yp
make:Warning:Don't know how to make target /etc/bootparams
Current working directory /var/yp
updated netid
pushed netid
Couldn't find /etc/timezone
make:Warning:Target all not remade because of errors.
Current working directory /var/yp

I had the a similar problem with new users on sloaris 8.
I wasn't able to add new users and change the shell variable while using admintool.
Login back into the console would simply not happen.
All i've been able to find is that changing the users' variable - i.e. .login or .profile to match that of a working existing user (root),
would skip over the problems.
Other variables in the skeleton files were helpful. I suggest you take a look at them.

Problem while creating a new track

Hi,
When we create a new track, we get the following exception:
Unexpected error; inform your system administrator: com.sap.cms.util.exception.CMSUnexpectedException: com.tssap.dtr.client.lib.cms.DTR.connect(Ljava/lang/String;Lcom/tssap/dtr/client/lib/protocol/ISessionContext;)V
We have created a new product and a software component and defined the dependencies for the software component (SAP_BUILDT, SAP_JTECHS & SAP-JEE). In the CMS, we have done Update CMS. We are able to see the software component and have added the same in the 'Software Components for Development'. All the usage dependencies are clearly visible.
When we save the track, we get the above exception. Can any one of you please respond this query?
Thanks in advance.
Regards,
Ravi

Hi Ravi,
We enocounted a similar problem once. For our situation it was a missing DTR url in the lanscape configurator. To check/fix this do the following:
1) login to CMS
2) click on the Landscape Configurator link
3) if not already selected, choose the track in the list of tracks on the left
4) click on the Track Data tab for the selected track
5) verify that the Design Time Repository URL is specified and correct (e.g. http://<server>:<port>/dtr
Save the configuration.
Hope this helps.

Problem while creating a new internal order. Please help! URGENT!!!

Hi Experts,
After creating internal orders the currency and cost center fields under control data tab are getting greyed out when I check it via KO02 transaction. The order status is "REL". This in turn is not allowing me to change currency and cost center via KO02. What could be the problem? Why these control data fields are getting greyed out or disabled? Is there any configuration problem? Kindly help ASAP!
Actually I am creating the order via XI. The input order data is coming from a .Net application which sends the data to XI via webservice call. The XI then uses RFC BAPI "BAPI_INTERNALORDER_CREATE" to create the internal order in R/3 system.
kindly help please!
Thanks
Gopal
Edited by: gopalkrishna baliga on May 20, 2008 12:09 PM

Hi Gopal,
This is based on your configuration on ERP. You have to talk to your functional consultant to get the right order type and right configuration for same.
Thanx & Regards
Vinod

Problem while creating a new project template

I am trying to create a new project template under one operating unit newly created.
I am using P A Super User responsibility for that operating unit.
In profile setting the above responsibility has been assigned the new operating unit under Mo operating unit profile.
Now when I go to Setup>>Projects>>Project Templates and click on New, the form to create new Project template opens up but in the field where I have to select the operating unit, it shows no values in the LOV.
Can anyone please help me to know what setting do I have to perform so that I can select the operating unit in this new Template creation Form.
Regards
Hawker Hunter

Dear Mr. Govind,
we have followed all the Project Implementation Setup for the new operating unit except for the Implementation options which we have to fill up for each operating unit.
In the implementation Options form in the first tab 'System' there are many fields to be filled up.
For 'Summarization period Type' we choose 'G L Period' and based on this the fields 'Calendar Name' and 'P A Period Type' automatically gets populated.
But in our case the 'P A Period Type' is not getting populated.
Can you let me know where we can link the 'P A Period Type' to the chosen 'Calendar name'?
Also there is a check box - 'Maintain common PA and GL Periods'. If we tick this check box, a message says: 'The Period Type and Calendar of the PA Period does not match the Period type and Calendar of the corresponding GL Period.'
Can you please let me know where to create the PA Period based on the corresponding GL periods?
Regards

CRM BDoc Modeler - Problem while creating a new segment

Hi all;
I have created a new BDoc type and wanted to add a segment. I imported a structure with some QUAN fields and a UNIT type fields. While activating segment, I got an error. I saw that the structure was not activated since I used some QUAN type fields and they were not assigned a UNIT type field. But the assignment was already done in the structure I imported. Is there a solution to use QUAN fields in segment definitions or what data element should I use instead of them?
Thanks for your answers in advance;
Hakan

Hi all;
I have created a new BDoc type and wanted to add a segment. I imported a structure with some QUAN fields and a UNIT type fields. While activating segment, I got an error. I saw that the structure was not activated since I used some QUAN type fields and they were not assigned a UNIT type field. But the assignment was already done in the structure I imported. Is there a solution to use QUAN fields in segment definitions or what data element should I use instead of them?
Thanks for your answers in advance;
Hakan

Problem while creating a new row

I am trying to create a new row in FulfillmentLineEntryResultVORowImpl which will be within the CheckAvailabilityOutputVORowImpl.
For that I am trying to do the following coding and I am getting the "NullPointerException" while creating the "flrow".
Please look in the code and suggest me the correct way.
CheckAvailabilityOutputVOImpl outputVO = getCheckAvailabilityOutput1();
CheckAvailabilityOutputVORowImpl outputRow = null;
outputRow = (CheckAvailabilityOutputVORowImpl)outputVO.createRow();
FulfillmentLineEntryResultVOImpl fle = getFulfillmentLineEntryResult1();
FulfillmentLineEntryResultVORowImpl flrow = (FulfillmentLineEntryResultVORowImpl)fle.createRow();
flrow.setErrorCode("26");
fle.insertRowAtRangeIndex(0, flrow);
and
public CheckAvailabilityOutputVOImpl getCheckAvailabilityOutput1() {
return (CheckAvailabilityOutputVOImpl)findViewObject("CheckAvailabilityOutput1");
public FulfillmentLineEntryResultVOImpl getFulfillmentLineEntryResult1() {
return (FulfillmentLineEntryResultVOImpl)findViewObject("FulfillmentLineEntryResult1");
}

Hi,
I am using transient VO.
The code that i mentioned earlier is to create the dummy response for the web service in error condition.
For normal condition we are getting data from XML and by using readXML I am generating row nicely.
The piece of code for normal scenario where it is working nicely is...
Document doc = sendMessage("CheckAvailabilityInput", headerNode);
CheckAvailabilityOutputVOImpl outputVO = getCheckAvailabilityOutput1();
outputVO.readXML(doc.getDocumentElement(), -1, getXslForReadXML());
if (AppsLogger.isEnabled(AppsLogger.FINE)) {
Node headerNode1 = (XMLNode)outputVO.writeXML(-1, XMLInterface.XML_OPT_ALL_ROWS | XMLInterface.XML_OPT_ASSOC_CONSISTENT);
try {
Writer sw = new StringWriter();
((XMLNode)headerNode1).print(sw);
} catch (IOException e) {
AppsLogger.write(this.getClass(),
"Couldn't convert the VO to xml",
AppsLogger.FINE);
outputRow = (CheckAvailabilityOutputVORowImpl)outputVO.getRowAtRangeIndex(0);
And The xml that I am using is like below....
<?xml version="1.0" encoding="utf-8"?>
<checkAvailabilityOutput xmlns:op="http://xmlns.oracle.com/apps/scm/orderPromising/orderPromising/promisingServices/types/">
<PromisingSystem>DOO-OP</PromisingSystem>
<PromisingInstance>Instance</PromisingInstance>
<PromiseDate>2012-08-22</PromiseDate>
<FulfillmentLineEntryResult>
<FulfillmentLineReply>
<FulfillmentLineIdentifier>FID-003</FulfillmentLineIdentifier>
<NumberOfAltOptions>0</NumberOfAltOptions>
<DefaultAvailabilityOption>
<OptionRank>0</OptionRank>
<OptionSummary>0</OptionSummary>
<FulfillmentLineResult>
<FulfillmentLineIdentifier>FID-003</FulfillmentLineIdentifier>
<TotalPrice>8000</TotalPrice>
<TotalProfit>-392000</TotalProfit>
<TotalMargin>-98</TotalMargin>
<TotalValue>-392000</TotalValue>
<NumberOfSplits>0</NumberOfSplits>
<NumberOfSubstitutions>0</NumberOfSubstitutions>
<FillRate>100</FillRate>
<NumberOfAtpItems>1</NumberOfAtpItems>
<NumberOfCtpItems>0</NumberOfCtpItems>
<SourcingRule></SourcingRule>
<ResultDetail>
<SplitLineIdentifier></SplitLineIdentifier>
<Customer>CUST_ID_001</Customer>
<CustomerSite>CUST_SITE_001</CustomerSite>
<InternalSalesOrderDestOrg>
<OrgId></OrgId>
</InternalSalesOrderDestOrg>
<PromisingStatus></PromisingStatus>
<RequestedDate>2012-06-02</RequestedDate>
<PromisingType>Ship</PromisingType>
<ExpectedArrivalDate>2012-06-01</ExpectedArrivalDate>
<ExpectedShipDate>2012-06-01</ExpectedShipDate>
<ExpectedPickDate>2012-06-01</ExpectedPickDate>
<RequestedItem>ITEM_CODE_001</RequestedItem>
<ExpectedAvailableItem>ITEM_CODE_001</ExpectedAvailableItem>
<ExpectedAvailabilityOnRequestedDate>0</ExpectedAvailabilityOnRequestedDate>
<ExpectedAvailableQuantity>200</ExpectedAvailableQuantity>
<ExpectedAvailableQuantityUOM>EA</ExpectedAvailableQuantityUOM>
<ExpectedShipFromOrg>
<InstanceId></InstanceId>
<OrgId>HYDERABAD</OrgId>
</ExpectedShipFromOrg>
<ExpectedDropShipSupplier></ExpectedDropShipSupplier>
<ExpectedDropShipSupplierSite></ExpectedDropShipSupplierSite>
<ExpectedMode></ExpectedMode>
<ExpectedService></ExpectedService>
<ExpectedCarrier></ExpectedCarrier>
<CarrierCalendar></CarrierCalendar>
<ExpectedDemandClass></ExpectedDemandClass>
<ExpectedTotalFulfilmentCost>400000</ExpectedTotalFulfilmentCost>
<ExpectedShippingCost>0</ExpectedShippingCost>
<ExpectedMargin>-98</ExpectedMargin>
<Price>8000</Price>
<Profit>-392000</Profit>
<Value>-392000</Value>
<LineFillRate>100</LineFillRate>
<ErrorCode></ErrorCode>
<ErrorMessage></ErrorMessage>
<PeggingDetail>
<ItemId>ITEM_CODE_001</ItemId>
<OrgInfo>
<InstanceId></InstanceId>
<OrgId>HYDERABAD</OrgId>
</OrgInfo>
<ShippingCalendar>Calendar1</ShippingCalendar>
<ReceivingCalendar>Calendar2</ReceivingCalendar>
<ManufacturingCalendar>Calendar3</ManufacturingCalendar>
<ATPDetail>
<Quantity>200</Quantity>
<QuantityUom>EA</QuantityUom>
<ATPCost>400000</ATPCost>
<ATPMode>3</ATPMode>
<LeadTime>0</LeadTime>
<RequiredQuantity>200</RequiredQuantity>
<RequiredDate>2012-06-01</RequiredDate>
<AllocationRule></AllocationRule>
<DemandClass></DemandClass>
</ATPDetail>
</PeggingDetail>
</ResultDetail>
</FulfillmentLineResult>
</DefaultAvailabilityOption>
</FulfillmentLineReply>
</FulfillmentLineEntryResult>
</checkAvailabilityOutput>

Problem while creating a new Data element in a new table?

Hello Everyone,
I have downloaded Netweaver 7.1 trail version from internet and while creating a data element through the data dictionary: i got this input box:
Register Object
SAP Release 701
Access key needed?
Installation DEMOSYSTEM
What could an access key be here in this demo version?
please help experts. thanks for writing back.
Cheers
lastw0nd3r
P.S:
I tried this access key already which was in devaccess table
29671482393151224771 but it didn't worked.
Edited by: lastw0nd3r on Jun 8, 2010 5:30 PM

in processformrequest() i wrote this:
if ((tableBean.getName().equals(pageContext.getParameter(SOURCE_PARAM)))
&&(ADD_ROWS_EVENT.equals(pageContext.getParameter(EVENT_PARAM))))
am.invokeMethod("createRecordInv") ;
in Amimpl.java
i wrote
public void createRecordInv()
try
OAViewObject vo = getARTransactionLineVO1();
if (!vo.isPreparedForExecution())
{ vo.executeQuery(); }
if (vo != null)
vo.setMaxFetchSize(0);
ARTransactionLineVORowImpl row1 = ( ARTransactionLineVORowImpl)vo.createRow();
if (vo.getFetchedRowCount() == 0)
{vo.insertRow(row1); }
else
{ vo.insertRowAtRangeIndex(vo.getFetchedRowCount(),row1); }
row1.setNewRowState(row1.STATUS_INITIALIZED);
catch(Exception ex)
{ ex.getMessage(); }
i am getting error
oracle.apps.fnd.framework.OAException: java.lang.ClassCastException

Problem while creating a new row in a advanced table

Hi
i am getting a error when i click on the add another row button...i followed the same steps given in dev guide..
please help me out
Error: Cannot Display Page
You cannot complete this task because one of the following events caused a loss of page data:
* Your login session has expired.
* A system failure has occurred.
To proceed, please select the Home link at the top of the application page to return to the main menu. Then, access this page again using the application's navigation controls (menu, links, and so on) instead of using the browser's navigation controls like Back and Forward.

in processformrequest() i wrote this:
if ((tableBean.getName().equals(pageContext.getParameter(SOURCE_PARAM)))
&&(ADD_ROWS_EVENT.equals(pageContext.getParameter(EVENT_PARAM))))
am.invokeMethod("createRecordInv") ;
in Amimpl.java
i wrote
public void createRecordInv()
try
OAViewObject vo = getARTransactionLineVO1();
if (!vo.isPreparedForExecution())
{ vo.executeQuery(); }
if (vo != null)
vo.setMaxFetchSize(0);
ARTransactionLineVORowImpl row1 = ( ARTransactionLineVORowImpl)vo.createRow();
if (vo.getFetchedRowCount() == 0)
{vo.insertRow(row1); }
else
{ vo.insertRowAtRangeIndex(vo.getFetchedRowCount(),row1); }
row1.setNewRowState(row1.STATUS_INITIALIZED);
catch(Exception ex)
{ ex.getMessage(); }
i am getting error
oracle.apps.fnd.framework.OAException: java.lang.ClassCastException

Issue while creating a new web part page (Safeunit.aspx) within a folder located under a Document Library.

Hi, I am facing an issue while creating a new web part page (Safeunit.aspx) within a folder (Safematic Seal Support Systems) located under a Document Library (Product Information Documents).
The path I am explaining:
Going to the Document Library (Product Information Documents) --> now inside that, clicking on a folder (Wet Seal Support
Systems) --> now inside the folder clicking on another sub-folder (Safematic Seal Support Systems) --> Here I want the web page Safeunit.aspx
Issue is that when I reach to the required destination, and want to create the web page by clicking on 'Site Action' --> 'Create' --> 'Web Part Page', now while selecting the Document Library name from the drop-down list, I do use 'Product
Information Documents' since the folder is inside this library only; but that create the page directly under the 'Product Information Documents' library, not under the sub-folder (Safematic Seal
Support Systems).
FYI, it is SP2007 version.
Kindly assist in this. Thanks in advance.

I see that you have the namespaces reference in your code.
I think you have changed the NameSpace name of your code to CreateSPFolder, change the reference in all your manifest, and other files to point to the current namespace name. It should help.
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if my reply helps you

Problem while creating URL iview (in EP7.0)

Hi,
I encountered a problem while creating URL iview (in EP7.0) as when I selected the iview template for creating the URL iview, the content area got displayed as
"No templates to display. You are not assigned to any existing templates."
please assist me in this regard.
Thanks,
Suri

Hi Manoj,
Thank you for your reply.
I am still getting the same messages even after creating the iview template in EP7.0
Created through:
content Admin --> portal content --> <folder>new --> iview --> seleting "Portal component - create an iView from a portal component contained in a deployed portal archive (PAR file)" <next> --> seleting "com.sap.portal.appintegrator.sap" <next> --> webdynpro <next> --> finish.
Open object for editing...--> Object is a Template to Yes.
Result :
content Admin --> portal content --> <folder>new --> iview --> seleting "iview template- create an iView from an existing iView template" <next> which displays the same message.
"No templates to display. You are not assigned to any existing templates."
Rgrds,
Suri.

HT5037 I still get the message to download the app, but I did, and the installation was allegedly successful. This even happens after a reboot

I still get the message to download the app, but I did, and the installation was allegedly successful. This even happens after a reboot

I guess that was a bit cryptic. I'm trying to update iPhoto from system 10.5.6, a PowerPC system, to 10.8. The app I downloaded is iPhotoLibraryUpgrader.dmg. I open that and I see Iphoto Library Upgrader.pkg. Igo through the install, which says it completes successfully. However, when I double-click on the iPhoto icon on the dock, I get the oroginal message that the upgrade must be installed. I hope this gives enough information to diagnose the problem. I apologize for the first message's laack of detail.

I am trying to load photos from my computer on to my ipad but keep getting the message "the device is no longer connected to the computer. It keeps popping up and I am stuck. This happened after I upgraded to the latest itunes

I am trying to load photos from my computer on to my ipad but keep getting the message "the device is no longer connected to the computer". It keeps popping up and I am stuck. This happened after I upgraded to the latest itunes software.

Greetings cdewinkel,
It seems your iPad is not staying connected to your computer during syncing. The following article provides a number of troubleshooting steps which may help. This article is intended for devices which are not being detected, but the troubleshooting steps are relevant to your issue:
If you don't see your connected device in iTunes for Mac - Apple Support
Make sure that your device is on
Also make sure that you can get to the Home screen.
Get help if you have one of these issues:
Your iOS device won't respond or turn on.
Your iPod won't turn on.
You forgot your passcode or your device is disabled.
Make sure that your Mac supports your device
See the system requirements for iPhone, iPad, or iPod.Check your USB connections
Unplug other USB devices from your Mac and try again.
Try a different USB port.
Try a different USB cable.
Learn more about using USB cables with your Mac.Make sure that your device trusts the computer
You might get an alert if you haven't connected your iOS device to this computer before. Unlock your device and tap Trust.
Learn more about the Trust This Computer alert.Restart your device
Restart your iOS device or reset your iPod.Restart your Mac
Turn your Mac off and back on.Update your software
Check for software updates on your Mac.
Check for an iTunes update.
Check your security software
If you have security software installed, learn how to resolve issues between iTunes and your security software.
Get more help
If you still don't see your device in iTunes, contact Apple Support.
Thank you for contributing to Apple Support Communities.
Best,
Bobby_D

Hi all, i'm new and facing a problem while creating a new file for Xcode. I can't select the box "with XIB for user interface" if the subclass is "UIViewController".this problem happen after i upgrade Xcode to 4.6 version.Appreciate for any help rendered.

Similar Messages

Maybe you are looking for