Hi All Unable to activate the adobe form help me in solving this
Hi All,
I very new to adobe forms. I was trying to create a simple adobe form and was unable to activate the form the error which it displays as>
Invalid HTTP connection :ADS Can anyone help me what should be done to activate it ....
Regards,
Misbah SUltana.
Seems like there is a problem in configuring your ADS RFC connection.
Go the transaction SM59 ( Maintain RFC connection ) there search for RFC Destination ADS of type G and test it.
If it doesn't works fine then report to your IT guy.
Similar Messages
-
Error when activate the Adobe forms
Hi,
I am getting the below error message when activate the adobe forms,and the message tells that to install a forms design tool,please tell me which tool in need to install and where i will get this tool.
Could not start Layout Designer (see long text)
Message no. FPUIFB086
Diagnosis
The forms design tool for developing the form layout could not be started; either it is not installed or there are errors in the installation.
Procedure
Make sure that you have the forms design tool installed on your desktop (the tool is part of the SAPGUI installation).
Also read SAP Note 801524.
Thanks,
Deesanth.FIrstly, you have posted the question in the wrong forum. There's an entire forum in SCN only for Interactive Forms: .
Secondly, this is a frequently asked question, especially in the Interactive Forms Forum. There's enough information there to get your query solved by searching.
pk -
HI
i have iPhone 4s with iOS 8.1.3 , since 2 days I'm facing a problem that the ring tone,lock button sound,password sound,volume buttons,slide volume and incoming call flash,
all these not working properly , sometimes it will work and sometimes it will not, I tried to restart the phone many times but I didn't fix the problem
plz help me to solve this problemTry to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose any data by resetting, but it can cure some glitches.
If this does not help, setting it up as new device would be the next step:
How to erase your iOS device and then set it up as a new device or restore it from backups -
Unable to print the adobe form Genrated by webdynpro
Hi Experts,
I have generated a adobe form using webdynpro Java. It sucessfully loading the adobe form in the browser but when I click print button above the form. It just opens acorbat reader console and doesnt print the form.
Is there any additional settign to be made to acheive it.
we are using WAS 7.0 and acrobat reader 8.0
Your suggestions are highly apprecited.
Thanks,
RajHi Raj,
Try this out. You can put the print button in the Form itself.
Go to Library -> Standrad -> Print Button
Drag the print button on to the form.
Try printing the form by clicking on the print button.
Cheers
Satya -
Unable to open the adobe form in NWDS
Hi,
I could not open a pdf form which is developed in NWDS. Its throwing the following error stack...Can anyone help me out on proceedings over this? Any ideas what can be the problem?
javax.xml.rpc.soap.SOAPFaultException: Exception in method rpData.
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.buildFaultException(MimeHttpBinding.java:643)
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.processDocumentFault(MimeHttpBinding.java:734)
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1224)
at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:78)
at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:95)
at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:277)
at com.sap.tc.webdynpro.pdfobject.core.PDFObject.createPDF(PDFObject.java:222)
at com.sap.tc.webdynpro.clientserver.adobe.AdobeFormHelper.createPDFDocumentForUIElement(AdobeFormHelper.java:457)
at com.sap.tc.webdynpro.clientserver.uielib.adobe.impl.InteractiveForm.afterHandleActionEvent(InteractiveForm.java:158)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.afterHandleActionEvent(ClientApplication.java:1123)
at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleActionEvent(WebDynproMainTask.java:402)
at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:649)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59)
at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:252)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:48)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:392)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:345)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:323)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:865)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:240)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:95)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:159)
Regards,
Deepthi Lakshmi.A.Hi
Is any updattions nwds inbetween time then that might be problem.
can u please check that ADS configuration once again.
that error meand webservices are not wroking and pdf services not able to capture.
In NWDS goto the webservice prosperctive and test the Adobedocumentservicesec . If it works fine then ok ohterwise some problem in ADS.
Thanks
Lohi. -
Error during the adobe form activation
hi all,
when am i activate the adobe form layout (Zlayout) , the following error message occured:
Error during activation
Message no. EU837
but iam not found any syntax error in layout development.
please help in this it very urgent....
Thanks,
RamanaHello Sir,
You need to apply the note 1047930, After this the problem should be resolved.
Thanks and Regards,
Deepak... -
Hi All,
I have modified the adobe form layout in the dev system.... I had to remove some of the hardcoded text there..
after i made the changes some xml code is appearing in the preview....
Ho can i remove it?
Can i replace the xml code with that in QA system?? please suggest
Thanks
Bharath Mohan BSome of those permissions are not supported by a dynamic form. Also those permissions do not apply to the native XDP format but they are used and applied to the PDF when it is created.
Hope that helps
Paul -
I need to align the margins of my forms with those of my website, I have looked at all the options and unfortunately I am unable to do it with access to the Adobe.form.min.CSS file which I can't access as a consumer, how else can I fix my problem
I need to align the margins of my forms with those of my website, I have looked at all the options and unfortunately I am unable to do it with access to the Adobe.form.min.CSS file which I can't access as a consumer, how else can I fix my problem
-
Read all rows in static table defined in the adobe form using webdynproABAP
Hi all,
The requirement is i have to display the 5 empty rows using adobe forms in the table format and retrieve the data from that 5 rows after user enter some value and post it in the database table. This is the part of my requirement.
I have done the designing part in interactive form and coding in WD using ABAP.
For that, I defined table in the adobe forms where in the DATA subform I have given Min count value is 5 instead of 1(selected the check box - repeat each item... also). I am able to display 5 empty rows successfully. After enter values in 3 rows and press SAVE button i am getting only first record but not all 3 records.
I have written the code for SAVE records in WD using ABAP. I am using this method "get_static_attributes_table" for getting all records.
Please help me resolving my issue.
Thanks in advance.Hi,
In the WDDOINIT method, create an internal table with 5 empty rows and bind it to the context using the method Bind_Table.
Then try executing your program, this should work.
If it doesnt , do let me know.
Regards,
Runal
Edited by: Runal Singh on Jun 11, 2009 3:00 PM
Edited by: Runal Singh on Jun 11, 2009 3:08 PM -
Can't create new pdfs from powerpoint; either form within Adobe or within powerpoint. I could do this yesterday and today it won't work for some reason. The error says "an unexpected error occurred. PDFMaker was unable to produce the Adobe PDF. How do I fix this?
Is there a log file in the document folder indicating what the problem was. There are a number of reasons that PDF creation may fail. You can try to print to the Adobe PDF printer to see if there is any indication in that process. The processing is different, but the same problems may show up with both processes.
-
How to display all PO data in the PDF form?
Hi,experts,
I create a WDJ application with the PDF form for print all PO sheet.
I can transfer all data from WDJ to PDF form.
I need continuous print all PO sheet that include header and items.
After I run the application, I found only the one PO header and one items in the PDF FORM.
I think the config of the adobe form is error.
The version of the adobe livecycle designer is 7.1.
Do you give me some hint?
Best regards,
taoHi, Chintan,
Thanks a lot for your reply so quickly.
I have check the config of the "Repeat Row for each item" according your word.
I change the checkbox of the "Repeat Row for each item" for the PO items, and the PO items is ok after I run the application.
But the pdf is only one PO sheet, not all PO sheet.
I found the checkbox of the "Repeat Row for each item" is unabled in the HEADER subform. I think it is the cause for the problem.
But I don't know how to enable the HEADER subform because the check box of the "Repeat Row for each item" is unable in the subform of the header.
Do you give me some hint? Thanks a lot for your help!!!!!
Best regards,
tao -
How to use the separate symbol in the text field in the adobe form.
Hi,experts,
I dont know how to use the separate symbol to make a paragraph separate into several lines correctly in the text field in the adobe form.
Action:
1. config the ADS successfully.
2. create the adobe form with a mult-line textfield(binding the 'remark' context in the interface of the form) using sfp.
3. create a WDA for invoke the form and transfer the 'remark' context data.
I use the following codes to display the paragraph in the PDF document:
CONCATENATE
'1、aaaaaaaaaaa;'
'2、bbbbbbbbb '
'3、ccccccccccc'
'4、ddddddddd'
INTO remark .
lo_nd_z_hr_php_payslip->set_attribute(
EXPORTING
name = `REMARK`
value = remark ).
But I found all the content aren't paragraph separate correctly in the text field in the adobe form when I run the WDA.
Could you please give me some hints to make the paragraph separate correctly in PDF document? Thanks a lot in advance!
My email is : [email protected]
Best regards,
Tao
Edited by: wang tao on Apr 8, 2008 1:58 AMHi,
If it is just a one word value then you could use this in the exist event;
this.rawValue
= util.printx(">?<*",this.rawValue);
This changes the first character (represented by the ?) to uppercase (represented by the >) and all trailing characters (represented by the *) to lowercase (represented by the <).
If you wanted something more general ... if they could also enter a middle name then you could call a function like;
function toTitleCase(textValue)
return textValue.toLowerCase().replace(/\b[a-z]/g, function replacer(match) { return match.toUpperCase(); });
This uses a regex to change all lowercase letters following a word boundary to uppercase.
Bruce -
Access the adobe form data in the workflow container for further processin
HI,
I am using HCM processes and Forms. I need to access the form data in the workflow container once the workflow kicks off.
I need to access these data as would need it for further processing in the workflow.
I know that TS17900110 allows to import form conatiner to
-> WF Container in the field name and value pair. But I need to access a lot more fields than what is in the task. Is there a standard task which allow to retrieve all the fields in the form in one task or do I need to develope a custom class to do that. If so could you please provide some clue as in how to code this specific requirement as i am somewhat new to OO ABAP.
Thanks...hi,
in the livecycle designer under libary tab u have webdynpro tab--->choose submit to sap button and place it in the adobe form ur designing. u can use this button to trigger the code that u have written in webdynpro java.
for eg if u have
a value node details
and under that two value attr fname,lname
import the model (Insertdata---it has two import param fname and lname)u need for updating the data to r3 system.
in the ctrller have a method submit.Here write the code to insert fname and lname into the db.
IPrivateMyForm.IDetailsElement elem = wdContext.nodeDetails().currentDetailsElement();
Insertdata_Input input = new Insertdata_Input();
wdContext.nodeInsertdata_Input().bind(input);
input.setFname(elem.getFname());
input.setLname(elem.getLname());
try
wdContext.currentInsertdata_InputElement().modelObject().execute();
wdContext.nodeOutput().invalidate();
catch (Exception ex)
{ ex.printStackTrace();}
ul bind details to the datasource.
when u edit ur interactive ui element these attr(fname and lname) vl be visible under dataview tab u can drag and drop them to the form
now add submit to sap button in ur form.
this button correspond to the onactionSubmit dat u have written in the ctrller.
so wen u click this the data vl be inserted
Regards
Jay -
Calling the Adobe form in a workflow step for Approval
Hi All,
We are creating a PCR scenario using Adobe forms for "Employee seperation". This form will require 7 subsequent approvals from various agents which is to be handled using a workflow.
I had gone through the ISR cookbook and managed to create a scenario. I have also assigned it to a PDF form and a dummy workflow. Now from my PCR iview i am able to submit the form for my scenario which also triggers the dummy workflow(through the BUS7051-CREATED event).
Right now this dummy workflow just sends a mail(by sendmail step) to the first approver. Now i want this workflow to send a workitem to the first approver for approval of this form which will have to appear in his UWL. When the approver double clicks on the workitem in UWL he should be able to view the form along with Approve/Reject/Cancel buttons. I am not aware how to do this. My questions are,
<b>Is this handled by a decision step or an activity?
If it is an activity step which Task/Business object method is used to handle this?
If it is a decision step how do we make the Adobe form also to be displayed along with approve/Reject buttons?</b>
We are using ECC5.0 and EP6.0.
Thanks in advance for any help.
Prasath NHi Rajasekhar,
The UWL issue has been resolved now and i am receiving the workitems in my UWL. But i am getting the following error when i am trying to execute the workitem from my UWL.
<b>Service cannot be reached
What has happened?
URL http://xxxxxxxx.xxxx.xxx.xxx:8000/webdynpro/dispatcher/sap.com/pcui_gp~isr/IsrFormApprove call was terminated because the corresponding service is not available.
Note
The termination occurred in system xxx with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:DALSPHSB_HSB_37-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
</b>
I have done the following configuration settings in SWFVISU transaction :
Task : TS500000075
Visualization Type : WebDynpro Java
visualization parameter: Application
visualization Value: IsrFormApprove
visualization parameter: Package
visualization Value: sap.com/pcui_gp~isr
Is there anything else that i have missed out in the configuration?
Message was edited by:
prasath natesan
Message was edited by:
prasath natesan -
Place the Adobe Form as PDF file in a URL
Hi Experts,
I have created an Adobe form and got the PDF data in the form of XSTRING now I need to place this as PDF file in the URL which I have generated programmatically. Not sure on how to do it. Any function modules or classes to place this as PDF file at a URL will be really helpful for me.
Tried with HTTP* function modules and seems they are not working.
Thanks for you help.
Regards,
SrinivasHi Sai,
Thanks for ur input.
My requirement is not exactly the string with XML data, but the string with PDF data.
I will try to explain my requirement here in detail.
I have the adobe form triggering from the webdynpro. This form has different objects like, text fields, dropdowns, check boxes, radio buttons...etc and one SUBMIT button for which webservice is attached in the properties.
User will fill all the fields and clicks on SUBMIT. When he clicks on the SUBMIT, the webservice should attach the filled PDF document at partner level.
For this purpose, i need the string with PDF data and not the XML.
WIth this PDF string again i should be able to re generate the PDF document which was filled by the user.
If string with PDF data is not possible, Please suggest me the possible way of achieving this?
Regards,
Ram.
Maybe you are looking for
-
Not getting MessageId in the Sync response from the Exchange Server
My client uses 12.1 protocol (Exchange 2007). When client sends a sync command similar to below: <?xml version="1.0" encoding="utf-8"?> <airsync:Sync xmlns:airsync="AirSync:"> <airsync:Collections> <airsync:Collection> <airsync:SyncKey>16
-
hello applecare can you help with the macbook pro i did the update the last one and safari doesn't open anything .. what should i do ?
-
How to include more than one input ready rows in analyzer
Hi Gurus, I have a requirement that, I need to have more than one input ready rows at the end of the query output in analyzer. Normally it will show only one row as input ready at end of the query result in any manual planning analyzer., B
-
Scheduled report ( Do not send when no dada found )
Hi good morning everybody I have a scheduled report in my work that sends daily cash spends to our managers , it works fine, but also sends with an empty attachment the day that company does not spend , I want the scheduled report not to be sent when
-
MBP 13' Won't boot from CD or external Drive
Recently my MBP 13 (newest version) occasionally crashes with the grey screen death which forces me to hard shut down. This led me to believe my directory may be corrupted so I tried to boot from my external OS X (Snow Leopard) with DiskWarrior insta