Hi.at first sorry for my bad english language.i have mac book pro with two os(win7 and mac10.9.3)when i want to restore my iPad air in mac os iTunes error 17 but in win7 easily restore!why?

hi.at first sorry for my bad english language.i have mac book pro with two os(win7 and mac10.9.3)when i want to restore my iPad air in mac os iTunes error 17 but in win7 easily restore!why?

Hi there saharalirezaie,
You may find the troubleshooting steps in the article below helpful.
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Resolve communication issues
Related errors: 17, 1004, 1013, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, or 3200. These alerts refer to gs.apple.com, say "There was a problem downloading the software," or say the "device isn't eligible for the requested build."
Check the hosts file or TCP/IP filtering, which might cause communication issues between iTunes, ports, and servers.
-Griff W. 

Similar Messages

  • HT204350 I have a Mac Book Pro with 10.6.8 and want to back up my files using a flash drive.  It says I did it but when I tried to check on my other Mac - an I Mac with 10.5.8, thedata does not seem to be there.  I cant see photos, etc.

    I have a Mac Book Pro with 10.6.8 and want to back up my files using a flash drive.  It says I did it but when I tried to check on my other Mac - an I Mac with 10.5.8, thedata does not seem to be there.  I cant see photos, etc..  It shows the backup as a file and shows various system info.  but there are no photos or other files shown.
    Thanks for any advise.
    Mike

    A PowerPC Mac, if that's what it is, won't be able to see an Intel Mac's formatted data.  Also ExFat formatting is not supported by 10.6.3 or earlier.  I would try viewing the backup on another Intel Mac with at least 10.6.4.  If it isn't there, then the backup never really took place.  I much profer a hard drive with Carbon Copy Cloner.

  • After upgrading to ios 8.2, my keyboard on my iphone 5s is weird. When i typing a sms, the screen is locking it self. Does somebody have the same problem? Sorry for my bad english...

    After upgrading to ios 8.2, my keyboard on my iphone 5s is weird. When i typing a sms, the screen is locking it self. Does somebody have the same problem? Sorry for my bad english...

    Hello Wexxwoxx,
    Welcome to the Apple Support Communities!
    I understand that after you updated to iOS 8.2, while typing a message your iPhone seems to be locking itself. In this situation, there are a couple of different troubleshooting steps that I would recommend. 
    First, I would suggest closing the Messages application completely by using the instructions in the attached article below. 
    Force an app to close in iOS - Apple Support
    After the Messages app is closed, I would recommend resetting your iPhone using the instructions in the next attached article. After the reset, open Messages fresh and attempt to use as you normally would. 
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    Have a great day,
    Joe

  • Sorry for my bad english. My ipod have a white screen and after few secondes somes lines appear

    Sorry for my bad english. My ipod have a white screen and after few secondes somes lines appear.

    - Try a reet:
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Next connect to computer and if it shows in iTunes restore the iPod.
    - If the screen is still white, let the battery fully drain and charge for an hour.
    - If still white screen it is time for an appointment at the Genius Bar of an Apple store.
    - If not, the try the reset and connect to iTunes and restore.  Also try placing the iPod in recovery mode and then restore. For recovery mode:
    iPhone and iPod touch: Unable to update or restore

  • On updates my cc shows only something when i mark it, know anyone any tricks what it is? sorry for my bad english :D

    hi when creative clouds show me there is an update and i open it the window is white, when i mark it with the mouse there i see the text after updating cc i open it, its all so it will be, know somebody whats the problem? i use am normal pc with win 7 64 bit (prog wich runs in background are kaspersky , spyder calibration for screen and my printsoftware (brother)
    i hope somebody can help me to fix that
    (sorry for my bad english)
    greetz thomas from germany

    Elaine.  What are you trying to import from?  Are you inserting a camera memory card in the slot on the side of your mac? Are you connecting your camera to the mac through a USB cable? It sounds like you can see your pictures, where do you see them, on the memory card that you open on your desktop, or are you using software that came with your camera?

  • I receive a mail with this promotion: Pick up a Mac or the new iPad by 9/21. Get a gift card for apps.. But I recently bought a Mac Book Pro in a Chicago store, and I do not get an extra credit  :(

    I receive a mail with this promotion: Pick up a Mac or the new iPad by 9/21. Get a gift card for apps.. But I recently bought a Mac Book Pro in a Chicago store, and I do not get an extra credit 

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • I cannot connect my iPhone 5 32GB IOS 6.02 to iTunes 11.01 on a Mac Book Pro. The screen freezes and doesn't recognize the iPhone at all. Thank you for your help.

    I cannot connect my iPhone 5 32GB IOS 6.02 to iTunes 11.01 on a Mac Book Pro. The screen freezes and doesn't recognize the iPhone at all. Thank you for your help.

    Read here.
    http://support.apple.com/kb/TS1591

  • My mac book pro with retina display is not gtting log in prompt. back apple logo is glowing and screen also glowing in dim but i am get getting login prompt. what shall i do for this issue?

    my mac book pro with retina display is not gtting log in prompt. back apple logo is glowing and screen also glowing in dim but i am get getting login prompt

    Gray screen at start up?
    http://support.apple.com/en-us/TS2570

  • Do I have to uninstall itunes on my old PC before importing/populating my Mac Book Pro with My iPad stuff?

    Good Day,
    My apologies for the cumbersome subject line/question. In a nut shell, I currently, have my itunes account on my spouses PC and on my iPad(3). I love the Mac stuff so much that recently, I purchased a Mac Book Pro so I could work from two Mac products. I want to take all the apps that I purchased, music, photos etcetera that is on my ipad and put it on to my Mac Book, but it is my understanding that I can only have my music and purchased apps or itunes account on two procducts that includes a PC. So my first question is do I have to, uninstall the itunes on my spouses PC before I can synch my iPad to the Mac, keeping in mind that the itunes account is in my name.
    Second, do you have any tips (best practices, pitfalls to look out for) for the best way to populate my Mac Book Pro with my iPad Apps and Music, I would like the apps and music to be on both the mac book and the iPad. I realize the most obvious answer to my second question is synching the iPad with my Mac but before I do that I would be greatful for any insight and expertise in this area.
    Thanks so much for you time.
    L.

    No you do not have to uninstall iTunes on the PC in order to unsync with the Mac. And where you got that information about having iTunes content on two products only is beyond me. You can associate your Apple ID and iTunes content with up to 10 devices but no more than 5 devices can be computers.
    If you could copy the iTunes library to your new Mac, that would be the ideal thing to do in order to transfer the iTunes library over. That would make the process pretty easy. You can also download most purchased content again as long as you use the same Apple ID and you could move content into your iTunes library that way.
    You will need to authorize the new Mac for your iTunes content. Launch iTunes on the Mac and got to Store>authorize this computer.
    There are many articles that will guide you through copying the iTunes library to the Mac and you can look through a bunch of them here.
    https://www.google.com/search?q=copy%20itunes%20library%20to%20new%20mac
    If you need to download past purchase ....
    http://support.apple.com/kb/HT2519
    And this is a very informative user tip that will tell you how to move all of your iPad contents into the Mac if you cannot copy and transfer the iTunes library.
    https://discussions.apple.com/docs/DOC-3141

  • I to use iphoto library manager to save corrupted iphoto and each time it saves some and the first time it brings up iphoto, iphone goes into "not responding" mode.  Using mac book pro, iphoto 9.5.1, and maverick 10.9.2.

    I've had issues with my iPhoto "not responding" and as a result I am attempting to save my photos to an external hard drive using iPhoto library Manager but each time I start the program it saves some, and then when it starts iPhoto, iPhoto then goes into not responding mode. Using mac book pro, iphoto 9.5.1, and maverick 10.9.2. I have completed all of the photo library first aid steps several times, but it makes no difference, iphoto eventually goes to "not responding."  Initial issues started with Time Machine back ups stopping because of iphoto. Thanks......

    Do you have a back up?
    If you're just trying to recover the photos you can do that much more simply:
    Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
    Look there for a Folder called 'Originals' or 'Masters'. (varies according to the version of iPhoto)
    Your photos are inside - these are the originals as imported from your camera.

  • Can i buy mac book pro with english keyboard from dubai?

    i will visit dubai and i am planning to buy a mac book pro from there. İ wonder if i can buy this mac book pro with an English keyboard and all the manuals in English. Any help on this please?

    Actually, you can - but it is special order only - they consider it as a customized unit....You might have to wait a week or two.....
    You can check the Apple Store at the Mall of the Emirates and see if they have it in stock....
    Or, you can go to Apple's website select UAE as the country and configure it with the US keyboard and wait for delivery...
    Good luck..

  • I have a mac book pro with os x 10.5.8.......sometimes will not load google or yahoo, or any other search engine, but will load regular sites.....why is this?

    i have a mac book pro with os x 10.5.8.......sometimes will not load google or yahoo, or any other search engine, but will load regular sites.....why is this?

    Check System Preferences - Accounts
    Choose you account - login items: If iTunesHelper
    shows up - remove it it will prevent re-installation.
    It did not have iTunes in the list, just mail and iCal alarm. Deadlines and emails are vital in my home office.
    Now that I think about it, adding Mail to the list was the only thing that I had changed to the computer when this happened, but I can't imagine how that would alter permission to install on the OS.
    Eric
    Note: I saw a G5 1.2 for $1,500 CAN. I was tempted.

  • I have a mac book pro with snow leppard, I tried to get update to flip4mac but I get a message saying unable to contact server ? is this happening to any one else

    I have a mac book pro with snow leopard, I tried to check for updates on flip4mac but got message saying cannot contact server try again latter. This is the second day in arrow with this response. I got a I Tunes update yesterday and my flash player is up to date. is this happening to anyone else ?

    I am recieving this error as well.
    Yes, going to the website is an option for updating, but the Flip4Mac System Preference panel affords a method to check for updates without going this route.  It may be either a problem with Telestream's software, or perhaps it's a probelm with system configuration (corrupt prefs, outdated URL, etc.)  Telestream is aware of the issue, but has not as yet found the problem / solution.

  • I can not pair my itouch with my mac book pro version 10.6.6 .. it seems that maybe my itouch is having trouble connecting as my mac seems to pair, then waits for my itouch and it never works. please help!!

    can not pair my itouch with my mac book pro version 10.6.6 .. it seems that maybe my itouch is having trouble connecting as my mac seems to pair, then waits for my itouch and it never works. please help!!

    I am not certain this will fix your problem but I suggest you assign the printer a static IP address.
    Using the printer's front panel, select Menu > Network > WLAN > TCP/IP > Boot method, and change it to "static". Provide a static IP address that is on your LAN's subnet.
    For example, if you are using an AirPort Extreme, you might give it an IP address of 10.0.1.100. If you are using a Netgear or Linksys router that defaults to issuing 192.168.x.x addresses, you might give it an address of 192.168.1.100. That way, the printer will always "reside at the same address" on your network. If your router has the ability, you should reserve that address so that the router does not attempt to assign it to another DHCP device.
    Then, go to System Preferences > Print & Scan, and delete your existing printer with the "–" (minus) button. Add it again, using the "+" (plus) button. In the window that appears, select the IP pane, and from the Protocol menu select "Line Printer Daemon (LPD)". In the Address field type the IP address you gave your printer.
    If all goes well the "Pring Using" field will detect the printer at that address and automatically select the appropriate driver. You will see something similar to the following screenshot ("name" can be whatever you decide, and "location" is optional):
    Click Add, then you can close System Preferences.
    There are other possible reasons your printer is "not responding" which could include wireless interference from competing wireless networks, but try this "static IP" method first. It should mitigate the problem.

  • I downloaded the new software for mac book pro with retina and the office doesn't work

    I downloaded the new software for mac book pro with retina and the office doesn't work

    cynthia alia wrote:
    I downloaded...
    ... but did you INSTALL it?
    Office::2008 was drag & drop, but Office::2011 has an installer you need to run.

Maybe you are looking for

  • Field Bus. Area is a required field for G/L account 1000 30400011

    07.09.2007 Hi, When I am releasing an invoice for accounting I get the following error "Field Bus. Area is a required field for G/L account 1000 30400011". 1000 is the company code & 30400011 is the G/L account. Can anyone help me to sort  this probl

  • Why are my PXI cards not recognized by Windows or MAX?

    I have a PXI-1045 chassis connected to a PC through MXI-4.  When I turn the chassis and PC on with a PXI card in slot 2, the message "Windows could not load the installer for DAQDevice.  Contact your hardware vendor for assistance." appears, and the

  • BC or blind copy, where is it?

    How to I select BC or Blind Copy for emails being sent through iCloud? I sign into iCloud on the my Mac Book, and I do not see anyway to send a BC or BCC.  Also the iCloud is not picking up my gmail account. Any suggestions? Thanks in advance, Marty

  • Internal compiler error: Assertion: (../lnk/v2mangler.cc, line 136)

    I am working in C++ in this environment: $ which CC /hep1/lang/sunstudio11/SUNWspro/prod/bin/CC $ CC -V CC: Sun C++ 5.8 Patch 121017-10 2007/02/21 $ uname -a SunOS hep 5.9 Generic_118558-37 sun4u sparc SUNW,A70 I have run into the following internal

  • Ipad mini delivery date 11/2 confirmed

    Just received an email from apple with ups tracking...friday 11/2 by end of day. Left Shanghai 10/29 to Osaka to Anchorage to Louisville Ky and now On its way to California.