HI can anybody   facing  IDOC'S ISSUE

HI can anybody   facing  IDOC'S ISSUE   
SEND IT TO ME 
I WILL SOLVE   FOR YOU
THANKS AND REGARDS
RAJU

hi there,
I am trying to load finsta into SAP from the middle ware GXS and all the ports in them looks good when I go to we02 to view the status, it gives error 51. the message says "Error during insert in table FEBKO". There are no more details of this error.
i Tried comparing FEBKO-AZIDT and FEBKO-WVTIM to make sure both are respectively unique
I have deleted this entries from FEBKO by running RFEBKA96 and then we tried to resend/reprocess the IDOC
but still persisting with the same error message 51,
the status on the idoc shud be 0 inorder to process that right.
even when we changed the time why is it giving us the error message 51.
can you put some light on to it please...
points will be assigned.
thanks
Jay

Similar Messages

  • Can anybody Assist, please ? Issue with running Prem Pro 1.5 on 'new' pc with Win XP Pro

    After some years of faithful service my PC died and I am not able to get Premiere Pro 1.5 to work on the new PC. I had several HDD with my video files on and the C: drive died. I have reinstalled the original drives so all my files are recovered and I can see/open them in Premiere BUT I cannot setup to capture anything.
    System is Win XP Pro, Pentium Dual core, 2.7GHz, 2Mb RAM, Capture device is Canopus with DV Storm 2 drivers, Sony DR1000 deck connected by firewire.
    When I go to capture settings there is an IEEE1394 option and DV Capture. If I select Canopus the PD INSTANTLY reboots. I don't know where to start looking for the issue . . . is anybody able to help ?
    Would be much appreciated . . .

    Ian
    Did you replace the whole PC or just the boot drive?
    I may be totally wrong but I had a Storm card years ago and it worked with Premiere up to the old verions 6 or 6.5, Premiere 6.5 is when it  became realtime and hence the Storm card was no longer necessary for anything other than faster mpeg encoding
    I seem to remember that Canopus introduced Lets Edit which then became Edius at this time and they dropped bundling Abobe products so I am surprized that Premiere Pro 1.5 worked with the Storm
    If the Storm cannot be got to work and you do not have a firewire port on the Mobo go to your local PC component supplier and obtain a firewire PCI card with Texas chipset and install it. the card should cost about $20-$30.  The Storms worked a treat but the Mobo had to be right and it did not like certain chipsets on the boards, not only that the installation process was a total pain

  • CV01N----Can anybody solve this interesting issue ?

    In CV01n when we upload any excel file data the data get save in SAP system. Now suppose if we delete the particular excel file data or replace the data then can the system show us the delete or replace file history, so that the changes made can be catched.
    I required this because in our company labels artwork are uploaded by QC department in PDF form in CV01n and our label department print the labels by taking labels artwork display from CV03n.
    But in some case if the labels are got rejected due to some mistake from our QC department then the changes made by our QC department can't get identified by our label department. Our QC department say that we have not made any changes in labels artwork the labels got rejected because the labels department didn't followed the correct artwork which was available in SAP system.
    Please provide your solution to this or suggest some other reliable system for proper system.
    Thanking You...........

    Hi Phalgun,
    You may utilize the 'Content Version' feature in DMS to track all the versions/changes to an original file.Search the forum for detailed information on Content Version concept.
    You label department may use the latest version for print and the previous versions to track changes.
    P.S For effective monitoring,you may also want to look at enabling the 'Change Status' field in the Document Type and 'Field Selection' field for all statuses for the Document Type so that  the QC dept would have to mandatorily change the status and log appropriate comments while making changes to the DIR/file/s.
    Regards,
    Pradeepkumar Haragoldavar

  • Desadv idoc processing issue

    Hi All,
      We are facing issue, when vendor send a two desadv idoc for packing delivery.
    First idoc correctly pack the delivery and change the packing status to completely packed.
    Processing second Idoc get fails but create a dummy handling unit. It delete one handling unit from the handling unit table VEKP but the trace remains in document flow table VBFA.
    This does not happen in all the cases and we are not able to reproduce in Quality system to debug.
    Does anybody faced the same issue earlier, and what could be the possible root cause and solution for this.
    Please help.
    Thanks in Advance
    Ankit Gupta

    Hi,
    As you have mentioned that you are using custom defined iDoc, you might be using a custom defined BAPI to receive the data from the iDoc.
    As you have said that the status is 64, your iDoc has entered the system & it has failed only when the data being sent to the application.
    kindly, check if the custom defined BAPI or RFC is working fine & whether it updates the status record or not? because you custom BAPI will be receiving the data from the iDoc.
    Also, test the scenario using the transaction WE19.
    or else you can use manual processing of iDoc using T.code - BD87.
    kind regards,
    Thangesh

  • Anybody facing issues on vodafone in bangalore for iphone 5s. horrible voice breaking occurs.

    anybody facing issues on vodafone in bangalore for iphone 5s. horrible voice breaking occurs. Really frustrting as voice calls break and automaticcaly gets disconnected.

    My current phone is not working. The iOS 8 update has made my phone go from a joy to have to something I want to throw away. I would like to uninstall my update and go back to loving my Iphone again. Can you please help? I've sent numerous messages with no response. I'm trying to stay loyal to Apple however if your only suggestion is to purchase another phone it might not be an Apple product anymore. I'm offering an opportunity to save a client who has multiple Apple products.

  • Push mail is not working with iOS 6.1.4. Is anybody facing same issue hare?

    My iPhone 5 is connected to our Exchange acccount.  Push email does not seem to be working on it. earlier i was to able use push mail but version for iOs was 6.1.1,due to hardware issue my iphone replaced by Apple,But new iphone5 brought me a serious luck. I have tried everything but it does not seem fit. Can anybody help me on this

    delete the account and re-add it.

  • Some videos are not showing in Apple TV playlist after upgrade to 6.0.  Can play on Macbook itunes and using airplay to Apple TV.  Anybody else have this issue?

    Some videos are not showing in my Apple TV playlists after upgrade to 6.0.  They were there prior to upgrade and I can play on Macbook itunes and also using using airplay to Apple TV.  Anybody else have this issue?

    Ok, so I'll try again.  Thank you for the idea of looking in Home Videos, which is where all my "lost" videos are listed.
    Is there a way to get them to display under their appropriate genre in the Movie section, which is where they all were listed prior to the os6 update?  It does me no good to have hundreds of movies categorized in iTunes via a genre only to have them appear in Home Videos on ATV.  These are not "home movies." They are legit mp4 movies that worked great under v5.

  • I had recently purchased a iphone 5s in Oman and had to move to India.I am facing some hardware issues with the earphone slot. When i plug in the earphone there is lot of disturbance heard. Can i get it repaired in India under international warranty?

    I had recently purchased a iphone 5s with OS version 7.1.2 in Oman and had to move to India.I am facing some hardware issues with the earphone slot. When i plug in the earphone there is lot of disturbance heard. Can i get it repaired in India under international warranty?

    No. The iPhone warranty is not international. You will need to have warranty service done in Oman.

  • I have updated my iphone 4s with ios6 and now im not able to connect to itunes store. I can open the apps store but cannot install any app?  Anyone facing the same issue..

    I have updated my iphone 4s with ios6 and now im not able to connect to itunes store. I can open the apps store but cannot install any app?  Anyone facing the same issue..

    I have a 4S and upgraded to iOS 6 last week without any issues.
    Have you tried resetting your phone (hold the power and home buttons down together until the silver apple appears)?

  • Can anybody send ALE/IDOC sample steps fot MATMAS?

    Hi friends,
    Can anybody send ALE/IDOC sample steps fot MATMAS?

    Steps for IDOC.
    Communication Settings will take care by basis.
    Communication settings.
    1.     BD 54     Create Logical system. (To get logical system FM
    OWN_LOGICAL_SYSTEM_GET)
    2.     SCC4     Assign logical system to client      
    3.     SM 59    Create RFC Destination.
    4.     WE 21    Create port.
    Partner setting.
    5.     WE 20    Create Outbound partner profile.
           (Creating outbound partner profile message type with MATMAS and IDOC type with MATMAS01-05 )
    6.     BD 64     Create Distribution model. (It will act as a BAG to carry the list of receiver details for all message type.)
    7. Run BD10 for outbound and BD11 for Inbound.

  • Can anybody explain all the details about idoc like configuration settings etc..

    Hi all can anybody explain the idoc configuration settings, communication channels sender and receiver settings

    Hi,
    Common steps in both Sender and Receiver:
    Create logical system and assign to client
    Create RFC Destinations in SM59
    Create RFC Ports in WE21
    Steps in Sender
    Create table in SE11 and insert data
    Create Segments in Tcode WE31.Define the table fields in segment
    Create basic IDOC type in WE30.Specify the above created segment name,save and release the IDOC
    Create message type in WE81
    Assign message type to IDOC type in WE82 and release
    Create partner profile in BD64,add the message type ,specify sender,receiver,message type and  generate partner profile and execute.Distribute the model view
    Check the partner profile in WE20
    Develop a report in SE38 with code that transfers the data from source to destination
    Execute the report and specify the fields to be transferred
    Check the control records in WE02
    Steps in Receiver:
    Create an update function module in SE37
    Assign the function module to logical message
    Define input method in Tcode BD51
    Create process code in WE42
    Generate partner profile in BD64
    After executing the report in sender system check in the destination system table wheather the fields are transferred
    In this case a custom table has been created in sender and receiver with same structure.We can even transfer the standard table fields by using idocs
    Thanks & Regards,
    Sravanthi Polu

  • Can anybody explain what is support for ADF Project and to solve the Issues

    Hi,
    I am new to ADF and i am currently associated to ADF Support Project.
    Can anybody explain what is support for ADF Project and to solve the Issues when the ADF Project is in Live.
    we are getting the Tickets for the Issues.
    Thanks in advance.

    I agree with Timo.
    It depends on the size of the project, user base, technologies, etc. We use lot of technologies in fusion middleware stack. We get tickets in many areas.
    In your case, it could be anything like user training issues (user may not know how to use the some system features), browser issues like blank screen, bugs in code like JBO errors (failed to validate, another user has changed row, failed to lock the record, NullPointerException, IllegalArgumentException etc), business logic issues, page may not render properly, performance issues, partial commit issues, application server issues, authentication issues. If you use web services you might get web services related problems.

  • After updates to ios 5.1.1...i can't add or edit my contacts and also can't take a photo at my contact lists. The '+' icon is suddenly disappear from my screen...anybody can assist me on this issue?

    after updates to ios 5.1.1...i can't add or edit my contacts and also can't take a photo at my contact lists. The '+' icon is suddenly disappear from my screen...anybody can assist me on this issue?

    At last, the BEST solution!
    In addition to my last post, here is the solution for fixing this problem without syncing your contacts with icloud.
    It takes about 2 minutes and permanently solves the problem so you can start adding and editing your contacts again on IOS 5.1.1!
    Basically you just need to follow these steps from the Settings page:
    Enable Airplane Mode
    Go to iCloud settings
    Turn on Contacts
    Agree to 'Merge Contact'
    Wait for pop up to confim iCloud contacts are on
    Turn off Contacts
    Confirm that you want to Keep your Contact on the iPhone
    Wait for pop up to confim iCloud contacts are off
    Disable Airplane Mode
    Airplane Mode temporarily blocks all phone signal/data to stop your contacts merging with icloud.
    Thanks to Washyman and Drewie77 for that info above! I got it from this post and it worked fine.

  • I have a i ohone 4. I recently updated to iOS5. Since then my phones messgae tone gets stuck and rings weird. Anybody facing same issue?

    I have a i ohone 4. I recently updated to iOS5. Since then my phones messgae tone gets stuck and rings weird. Anybody facing same issue?

    I am not having that issue.  Try a hard reset on the phone.  Hold down the power button and the home button at the ame time until you see the apple logo

  • I have purchased a mac in 2008 but now im facing the battery issue can u people get me the battery

    i have purchased a mac in 2008 but now im facing the battery issue can u people get me the battery. Two days back i also purchased a charger from ur apple authorised service centre and even though im not able to use my mac without power once i remove the charger from the power automatically it will switch off
    kindly help me ???

    You may find a battery for your Macbook here:
    http://eshop.macsales.com/shop/Apple/Laptop/Batteries
    Ciao.

Maybe you are looking for