Hi Can you tell me any datasource whcih has both action type and wagetype.

Hi
         Can you tell me any datasource or cube or multiprovider whcih has both action type and wagetype.
Edited by: manukonda anil kumar on Oct 11, 2010 1:45 PM

hi Manu,
I think this question has been answered check the below thread.
Datasource in HR which has both payroll and wagetype.
Regards
Kp

Similar Messages

  • How can you tell if a pic hasnt been tagged by iPhoto, and do you then...

    How can you tell if a pic hasnt been tagged by iPhoto, and do you then do you then have to draw "missing box" around them
    What I mean is tagged a few faces, imported some more pics, checked a few and they dont show as named faces, but are faces that are in my Faces source list (ie identified and named)
    So do I then have to draw a box around known faces to me, and name them again (I think iPhoto will pop up as Im typing the names I already have)
    It just means that even when i import and it doesnt name, I may have lots of pics that are of faces but not tagged and so not in my faces source list
    please help
    cheers
    ps when are Apple going to upload the Getting Started manuals for iLife 09? its been a while since released now, ad they give a bit more insight than the video tutorials alone

    No-one? It'll be nice to know how many pics of faces that arent yet tagged
    cheers

  • HT4994 HAI CAN YOU TELL ME WHICH SIM IS USED IN THIS IMEI **** AND WHICH COUNTRY

    HAI CAN YOU TELL ME WHICH SIM IS USED IN THIS IMEI **** AND WHICH COUNTRY
    <Edited By Host>

    No. Sorry, no one here can help you.
    The only reliable way to determine this info is to call AppleCare.

  • Can you use the same charging cable for both an iPhone and an IPad or are they different?  When I use the charging cable for my iPhone on my Ipad, it doesn't charge.

    Can you use the same charging cable for both an iPhone and an IPad or are they different?  When I use the charging cable for my iPhone on my Ipad, it doesn't charge.

    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
     Cheers, Tom

  • Can you tell if your MacBook Pro has latest revision logic board??

    is there any way to tell if your MacBook Pro has latest revision logic board??

    I'm awaiting the same thing, also in the U.K. The service center told me that they've had many of these repairs, and that there is a substantial backorder for logic boards in the U.K. I was told that it could be 6-8 weeks, which is absolutely appalling. I think that's an intolerable amount of time to repair a brand new, quite expensive computer.
    MacBook Pro + Powerbook G4   Mac OS X (10.4.8)  

  • How can you tell if an iPod touch has the new apps?

    Having seen the updates to the ipod Touch I'm finally ready to buy one. From the keynote I gather that new units shipping from the factory after 15 Jan have the new software, old units do not and, unusually for apple, even if you buy an old software unit after the announcement, you don't get the software for free. Worse still, I'm in one of those countries they sell the touch, but don't have an iTunes store, so if I buy an old one, I'm stuck with it, cannot upgrade.
    Is there any way to tell from the box which version you have, change in part number, anything? I'm sure they aren't doing the M$ sticker approach "now with 1.1.3 and lots of new apps". The return policy out here in Singapore is basically you can't, so I need to figure out in the store if the box I'm buying is new, or old, and I have no clue at all how much stock is left out there.
    Any suggestions?

    Hello, 
    If you're going to buy in a real shop then why not have the retailer open the box for you. Especially if they don't do returns - that's a must.
    The next suggestion is a little more hit-and-miss but the fourth and fifth digits of the Serial Number are the week of production. If you get a week 02 or later it should be okay. Perhaps someone with a brand new one could confirm.
    mrtotes

  • Can you tell if your stolen ipad has been updated

    I don't understand why apple cannot check my serial number to my lost or stolen ipad 2 and tell me if anyone has re-regestered or updated it since my loss of it.
    Aplle can find me any where on the globe but I can't get them to see if my ipad was stolen or I really just lost it. I had find my ipad installed but it hasn't turned on. unless the person whoi stole it cleared it out before I noticed it missing. If it has been updated since its lost than someone has it, if not it's somewhere and I will find it. I feel like I am not the only one with this problem. with all the money we spend on apple products a request like this should be done with out hesitation..
    thanks to anyone listening or who ever feels my pain,
    wjforbes

    no one asked apple to be in law enforcement. they don't seem to have a problem sending push notifications and using my location for thier benefit. i'm only asking for a little help to find my ipad that i paid $5600 for.  any device these days can be located if lost or stolen. these companies choose not to use thier abilty to locate these devices because they would rather you go out and buy another device. please don't take me wrong, i do not hold apple responable for my ipad. after spending hundreds of dollars on ipads iphones and apps i only asked for a little help. i am sure that i am not the only person who is frustrated by this. i am sure if law enforment came to them(apple) and told them to locate me on my ipad or iphone they would have no trouble finding me.

  • Can you tell when a loaded SWF has reached its final frame?

    I used loadMovie to load an external SWF into the bottom-half
    of a main "shell" swf. When that loaded SWF finishes playing (it's
    just an animation), I need to populate a text field with the word
    "DONE" . The text field resides on the _root, so I need some way to
    know when the loaded SWF has reached its last frame...
    This would obviously be easy if I had the .FLA of the loaded
    SWF because I could just write the actionscript on the last frame
    of that SWF to populate the _root textfield. Alas, I do not have
    the source FLA of that loaded SWF, so I need some way to have the
    main "shell" SWF/FLA know when that loaded SWF has reached its end.
    Is this possible???
    Thanks!!!

    DIY_Lobotomy,
    > The reality of my situation is that there's a "menu" of
    sorts that
    > gets loaded into "contentClip". This "menu" has a bunch
    of links.
    So far, so good.
    > When clicked, each link loads a DIFFERENT swf into
    "contentClip".
    > It is THOSE swfs that I need to note the end of.
    That's still okay.
    > So, there's actually more than one, and they're not
    exactly being
    > loaded directly from my main movie, since they're
    actually loaded
    > based on a link being clicked in the movie that is
    currently loaded
    > into "containerClip"
    The concept is still the same, no matter what. No matter how
    deep the
    one-clip-loads-another chain goes, you have to keep taps on
    each chain link.
    When the final link has loaded, you'll be able to make your
    object reference
    to that movie clip. That movie clip -- because it's an
    instance of the
    MovieClip class -- will have the _currentframe and
    _totalframes properties.
    You'll just be checking *that* cliip's properties instead of
    the one named
    contentClip in my own example.
    You can loop using onEnterFrame or, if you prefer, with
    setInterva().
    That doesn't much matter either, so long as you repeatedly
    poll the deepest
    clip to test its current frame against its last frame (this
    all assumes that
    the clip being tested is a linear animation whose end
    corresponds to its
    last frame; otherwise, you could check _currentframe against
    any arbitrary
    frame number).
    > I hope that wasn't too confusing! Do you still have a
    solution???
    Not too confusing to understand, but it might be confusing
    to route
    through in practice. Not confusing, actually, but meticulous
    ... you'll
    have to be careful with your pathing. Nested movie clips are
    very much like
    nested folders on your hard drive. Their instance names
    relate to the
    folder names.
    Now, if that menu doesn't have an instance name you provided
    -- or if
    any fork along the path has an instance name you can't
    control -- you can
    still reference the nested movie clips. If you test your file
    in the
    Debugger panel, you'll see all the instances laid out in
    hierarchical order.
    You'll see that automatic instance names are provided
    (something like
    "instance1", "instance2", etc.).
    David Stiller
    Contributor, How to Cheat in Flash CS3
    http://tinyurl.com/2cp6na
    "Luck is the residue of good design."

  • How can I tell if any table data has changed?

    HI
    I'm in the process of reverse engineering an application. We don't have the source code, so I've been looking to the Oracle 8 database to give me some clues as to what insert, update, delete operations are being performed.
    Is there any SQL I could run which would indicate the table data has been changed in some way.
    Thanks
    Glenn

    What's the application architecture? Is this a client/server application? Or a three-tier application? Is there a lot of PL/SQL? Or is all the SQL getting generated in the application and sent to the database? Depending on the architecture, a SQL*Net trace on the client may be appropriate-- that will log the SQL the client app is sending to the server. If you have a three-tier app, though, it may be hard to relate the SQL to a particular operation or to relate the SQL statements to each other. If you have a lot of stored procedures, you'd only see the procedure call, not the SQL the procedure executes.
    You could trace a particular database session, which has similar issues in a three-tier environment or if MTS (the precursor to shared server) is in use, but does capture SQL issued by stored procedures. That may put a degree of load on the database server as well.
    You could also query the data dictionary (i.e. V$SQL) periodically to see the SQL statements in the shared pool. You have to ensure that you're polling frequently enough to catch SQL statements before they age out of the shared pool and you won't generally be able to relate one statement to another or to a particular application function. But you could see all the SQL the database is executing.
    Justin

  • Can you tel me the exact status values for TBTCO table

    Hi Experts,
    Can you help me any one to know about "Status" field in TBTCO table.
    what is the meanings of this status values.
    1.P.
    2.S.
    3.F.
    4.R
    5.Y
    6.A.
    7.Z
    Can you tell me any function module to find status for the program and for the jobname.
    Thanks.
    Sailu

    Hi,
    Just used the where used list and found INCLUDE LBTCHDEF.
    Check it. seems clear
    btc_running       LIKE tbtco-status VALUE 'R',
      btc_ready         LIKE tbtco-status VALUE 'Y',
      btc_scheduled     LIKE tbtco-status VALUE 'P',
      btc_intercepted   TYPE btcstatus VALUE btc_scheduled,
      btc_released      LIKE tbtco-status VALUE 'S',
      btc_aborted       LIKE tbtco-status VALUE 'A',
      btc_finished      LIKE tbtco-status VALUE 'F',
      btc_put_active    LIKE tbtco-status VALUE 'Z',
      btc_unknown_state LIKE tbtco-status VALUE 'X'.
    Regards

  • When you look at the datasource name how can you tell it is LO or LIS?

    when you look at the datasource name how can you tell it is LO or LIS? for example 2lis_02_itm is it LO or LIS? how can you tell it is LO?
    York

    Hi Les,
        In most of the cases if the data has S in it that it will be LIS data source else it will be LO datasource.
    Normally LO datasources will have Header, Line Item and Schedule line datasources, where as LIS will contain onls LIS structure datasource ex: 2LIS_--_S*.
    Checkout this Weblogs for more details:
    /people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
    To findout the weblogs in search type keyword and in listbox choose weblog and click on go.
    example:
    2LIS_11_VAHDR (LO)
    2LIS_03_BF(LO)
    2LIS_03_UM(LO)
    2LIS_17_I3OPER(LO)
    2LIS_02_S174(LIS)
    2LIS_02_S012(LIS) etc...
    Let me know if you have any questions.
    Assign points if its helpful
    Regards
    Satish Arra.

  • Is there any Sound card 5.1 include stereo mix that working with MacBook Air such as Creative Labs SoundBlaster X-Fi Surround 5.1 Pro Entertainment System ? and if there any another sound card can you tell me what is it please ? Thank you.

    Is there any Sound card 5.1 include stereo mix that working with MacBook Air such as Creative Labs SoundBlaster X-Fi Surround 5.1 Pro Entertainment System ? and if there any another sound card can you tell me what is it please ? Thank you.

    Okay, I did my best searching and I couldn't find anything that matched all your descriptors. I did do a search on both decoder numbers. SB0256 returned very little results, but with SB0466, I was able to find this ebay listing:
    http://cgi.ebay.com/ws/eBayISAPI.dll...6_fvi%3D&_rdc=
    This card isn't a Champion like you suggested. And with my complete lack of knowledge, I don't know what I/O dri've bay means. But since it is PCI and the decoder matches the number you gave me, this card should be adequete, right?
    Whether it works or not, my search indicated it might be very hard for me to find that card (or any PCI card for that matter). Everything I saw was out of stock. I know this is a forum for Creative, but are there any other manufacturers that will allow me to accomplish my goal, either with current cards, or discontinued cards? Thanks again
    Oh, and I will vote on that thread. I probably won't wait for them to release the decoder since I need it now, but I still believe Creative should be giving the customer what they want

  • Can u  tell me any of you how to use Date class

    Can u tell me any of you how to use Date class. Please send me the source code.

    People won't send you the source code.
    Ask specific questions. You are very vague.
    Tell me how to build.

  • My computer temp runs at 120 degrees. I used scmfancontrol but it did not lower the temp much. Can you tell me what I can do to make it work or any other suggestions to fix this would be most appreciated.

    My computer temp runs at 120 degrees. I used scmfancontrol but it did not lower the temp much. Can you tell me what I can do to make it work or any other suggestions to fix this would be most appreciated.

    To get rid of "pop-up ads and other crap on my computer when I am on the internet", click on Safari in the Menu bar, and select Preferences. Next select Extensions. Delete all of them. Restart Safari.
    The first step in addressing the black screen is an SMC reset.
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
    Excerpt from
    http://support.apple.com/kb/ht39

  • Can you tell me why none of my music will play I had a little box that came up saying all your items are ticked so they will not play on itunes what does this mean it's driving me nuts help!!!

    HI there can you tell me why none of my music will play on itunes it just displays a message saying it cannot be located please help it is driving me nuts
    Jan

    About 5 days ago for no apparent reason at all, about
    7000 songs which i have collected over a number of
    years has just decided that it wont play in ITUNES or
    in any other of my media players. When you click on
    Play over a song nothing happens. The play icon
    doesnt even come up on the screen.
    Steps I have taken so far are:
    1 - Remove all tracks from ITUNES and then re-add the
    folder where all the songs are. This has obviously
    removed all songs, but when I have re-added the
    folder , it has added about 650 tracks back on to the
    playlist. These 650 tracks will play. This leaves
    approx 6400 tracks that it wont play.
    By the way all the songs on my PC are MP3 type and I
    have had no problem playing any of them until last
    week.
    2 - I have re-installed ITUNES and reinstalled
    Quicktime and that has not worked.
    3 - All of my songs are backed up on to a External
    Hard Drive. I have tried to restore the songs and
    also play them directly from the external hard drive.
    I get the same problem when I do this.
    4 - I have enabled and allowed all permissions for
    the account that I am running the PC from.
    I am guessing there must be some settnig or Registry
    Key that is blocking me playing the tracks from the
    PC. I have also tried to launch the songs in Media
    Player and Sonic stage but thsi has not played
    either.
    All the tracks are in the folder structure as they
    were before so I know they are there. I just need to
    somehow unlock them.......
    If anyone has any ideas, I would be very grateful as
    I dont want to lose my entire music collection.
    Also I cannot find anyweher on here that is a Support
    number or email address for Apple as this is an
    ITUNES issue and they should be resolving it for
    me!!!!
    Thanks
    Dell   Windows XP
    Pro  

Maybe you are looking for