Hi. Does anyone know how to extend the airport express and extreme with Cisco Router DPC3925. I have upgrade my wireless to 50Mbps. Thank you
Hi,
Can someone help.
I have a Cisco router DPC3925 provided by the ISP and I cannot extend my wireless with Airport Express.
Also I intend to extend it with Airport Extreme.
Please help.
Thank you.
Sorry, but your post is not clear. The topic of this thread is how to extend an AirPort Express or AirPort Extreme with a Cisco router.
This would mean that the main router was an AirPort device and the Cisco would be extending the existing network provided by the AirPort.
Is that really what you want to do?
If not, then it sounds like your Cisco ISP provided wireless router is your "main" router and you will be using the Time Capsule to extend the network.
Please start another post to tell us exactly.......
What device will be the main router providing your Internet connection and wireless network
What device will extend the network
What operating system that you have on your Mac or PC
Similar Messages
-
How compatible are the airport express and extreme with the 2wire routers?
I have been spending ages trying to set up our connection with a linksys router due to the lack of signal from our 2wire and they just do not want to co-operate. The 2wire is a 3800hgv-b with a special firmware from at&t to be able to be used for tv purposes as well and also so they can control their users. The signal barely leaves the room its in and it seems like this would help boost it to other parts of the house. Is this going to help my problems? Basically I don't want to use the 2-wire as a router just the AX and the 2-wire would just be used for tv. I don't know how familiar everyone is with U-verse but we were given three plug links which all connect to the same network. One goes to the 2-wire and we use one for a wired printer and I'm curious if i could use the last one to connect to the AX and broadcast it from upstairs. The linksys struggled with this because it couldn't act as an access point very well and it was better off with just setting up a new network. Would it be able to act as an access point for the 2wire? Basically I'm just curious if this is going to solve my problems, or at least most of them.
I have been spending ages trying to set up our connection with a linksys router due to the lack of signal from our 2wire and they just do not want to co-operate.
Since the "extend wireless network" feature used by Apple appears to be a proprietary function, it is extremely unlikely that an Apple device would "extend" or "repeat" the wireless signal that is being transmitted from your 2-Wire router.....if this is what you are asking here.
If you were to use both an AirPort Extreme (connected directly to the 2-Wire by Ethernet cable) and an AirPort Express, then you would be able to configure the Express to "extend" the wireless network that is being broadcast by the AirPort Extreme. -
Does anyone know how to get the vendor ID and product ID for NI-Visa? TIA
Does anyone know how to get the vendor ID and product ID for NI-Visa? TIA
This question has already been addressed in this thread:
Does anyone know how to get the vendor ID and product ID for a USB device in NI-Visa?
John M
National Instruments -
Does anyone know how to get the vendor ID and product ID for a USB device in NI-Visa? TIA
Does anyone know how to get the vendor ID and product ID for a USB device in NI-Visa? TIA
Hello,
Exactly which USB device are you referring to? Is the device a NI product?
The Product ID for National Instruments DAQPad-6020E is 0x12C0. The USB vendor ID is 0x3923. This is a 16-bit hexadecimal number(1093) (that is decimal 4243).
Also, here's a document on our website that will help you in configuring NI-VISA to control your USB device:
http://zone.ni.com/devzone/conceptd.nsf/webmain/6792BAB18242082786256DD7006B6416?opendocument
Swapnil P.
National Instruments Engineer -
Does anyone know how to get the airport extreme to recognize my Slingbox PRO HD?
When I run the utility for the SlingPlayer it cannot find the slingbox.
I imagine it has to do with the 10.0.Xx.XX IP address the airport creates so it cannot find the slingbox.
Any help with this?Nevermind. I fiddles and figure it out myself.
If anyone has a slingbox turn off you norton or other security software to set things up and then turn it back on.
Slingbox is an awesome product! -
Does anyone know how to update the software on an iPhone 4 when there is no software update button?!
Does anyone know how to update the software on an iPhone 4 when there is no software update button?!
Many thanks.Update it from iTunes on a computer as described at the bottom of this article; devices running an iOS version prior to 5.0 can't be updated straight from the device. It will be updated to the newest iOS version supported by the device’s hardware.
(83714) -
Does anyone know how to resolve the problem of apps not being able to download in the App Store? After the IOS 6 update I haven't been able to download any apps.
Maybe here:
IOS 6 App store crash: Apple Support Communities -
I have a late-2011 13-inch MacBook Pro running OS X Yosemite. (Standard configuration).
My problem is that I downloaded a fan control application and it worked perfectly, but it started to get annoying so I deleted it.
Does anyone know how to reset the fan speed back to factory settings (Maybe a command in terminal?)Hello damo1177,
It should help to reset your system's SMC and NVRAM.
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
About NVRAM and PRAM
http://support.apple.com/kb/HT1379
Cheers,
Allen -
Does anyone know how to connect an older 20" cinema display with the (ADC) adapter end and connect it to a MacBook Pro 17" 2008 model (DVI) ?????
I believe you naeed the Apple ADC to DVI adapter.
-
OB52 Posting Period Close: Does anyone know how to automate the close?
Does anyone know how to automate the FI Period Close (trans code OB52)? Currently, the business users go into the screen and open and close any periods manually. For the MM period close, we are able to do so because we found the program to use in the batch job. For some reason, the FI side shows the program SAPL0F00 but this is only a view and will not allow a batch job to be created. Does anyone know of the actual program used for the FI period close?
Use program RFPERIOD_OPEN. It may help. For further details you may check the following thread.
RFPERIOD_OPEN -
How to program a midi foot controller on Mainstage? Does anyone knows how to program the foot controller with exclusive solo channel in order not to dance "tip tap" while from clean guitar I go to crunch or solo? How to do this programming on Mainstage?
I basically managed to learn how to invert parameters which allows me to be as default in the clean guitar channel and if I switch the first button on the midi foot controller I switch to crunch, but at this point I tryied so hard to programm the second and third button to switch, only through a button in one step, to a third channel for distorsion or a 4th channel for solo guitar but I couldn't figured out how this work can be done!
I would appreciate if anyone could help or share this experience with others who are experiencing the same problem.
Cheers.
F.I cannot seem to get mainstage to recognize my FCB either. I am using IFCB. Anyone figure this out?
Thanks,
Eric -
please does anyone knows how to delete the "others" on the iphone becuase it take me a lot of spaace and i cant have anything i have 5 GB of othres coan some one help me please?
If restoring using your backup didn't work, you'll have to save as much of your data as you can (import your photos to your computer, sync your contacts and other data with iCloud, email things like Notes and Voice Memos to yourself, sync with iTunes to transfer all your purchases, etc.) and then restore it as new without using your backup.
-
I recently changed my apple ID but my previous apple ID is associated with my icloud account. I'm setting up my new iphone 6 and cannot complete the set up until I can sync my icloud account. Does anyone know how to change the icloud id?
Do the following:
Make sure you are signed into iMessage and FaceTime with your current ID. If they are signed into the old ID, go to Settings>Messages>Send & Receive and Settings>FaceTime, tap the ID, sign out, then sign back in with your current ID.
Then temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. (You should not have to verify the old email account so it doesn’t matter if you no longer have access to it.) Now go to Settings>iCloud, turn off Find My iPhone and enter your current password when prompted (even though it prompts you for the password for your old ID). Then go to Settings>iCloud, tap Sign Out and choose Delete from My iPhone when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address back to the way it was. Now you can go to Settings>iCloud and sign back in with your current iCloud ID and password (your data will download back to your phone). -
does anyone know how to delete the back up for the ipod? I am getting an error message that says "iTunes could not back up iPod because it is corrupt or not compatible with iPod; delete back up and try again"
Go to iTunes>Preferences>Devices and highlight the backup you want to delete and click on Delete Backup
-
I have two printers on my network. Does anyone know how to change the printer nomenclature - Officejet Pro 8600 (0B54AF) to a recognizable name...like Brad's Office when you use Airprint?
You would have to change that in the printer's settings on the printer, if that option is offered by the manufacturer. The iPhone just finds printers on the network and uses the name they have given themselves or that were given to them when they were set up.
Maybe you are looking for
-
Dear experts! It has come to light that the process of reconciling down payments with the subsequent invoice has changed at some point in time during a PL update for version 2007. I was able to create a down payment that would cover a whole years
-
Data Migration of Excise Duty payables at initial upload
Hi! Can any one tell me, how to upload initial Excise Duty payable in data migration procedure. for example if different excise duty payables like ED, CESS, SEC.CESS for normal goods and capital goods. thanks in advances. regs, ramesh b
-
Oracle Enterprise Manager - HTTP error: 503 Service Unavailable
Dear all, some time ago I've upgraded Oracle Database 10g up to version 10.2.0.4.0 on a Linux system. Now if I try to connect to HTTP Oracle Enterprise Manager interface (http://(My server name):1158/em/console/aboutApplication) I see this error into
-
Hi all! I was asked to prepare a project scope document as a part of my project of 1 month duration in lockbox configuration for two company codes which daily perform a manual posting of 250 cash payments So, could someone please help me with the det
-
Color LaserJet 2600n printing issues
When we print color images, the magenta does not print at all. Also it will smudge the ink on both ends of the paper. I cleaned the belt and it wasnt dirty at all. Hoep you can help.