Hi everyone, after updating to 10.6.8, i've been unable to backup to my external hard-drive on Time Machine. anyone having same issues?

I did a software update to 10.6.8. and I've been unable to back up my files to my external hard-drive on Time Machine. The error message it gives says "he backup was not performed because an error occurred while copying files to the backup disk."
It recommends using Disk Utility to repair the backup disk and i've tried that but it finds nothing wrong with the disk!
I even tried copying files off it so i could re-format the drive but it apparently can't do that and the error message is that there's a wrong case sensitive file. Please help, I really need a solution.
Thanks,
Regards,
Chi.

If you mean you're getting the same message:
see #C3 in Time Machine - Troubleshooting. It will show you how to locate the message(s) that describe the problem, then help you fix it. If that doesn't help, post back with details, including all the messages, your setup (especially the destination for the backups), what you've done, and the results.
If that's not the message you're getting, please clarify.

Similar Messages

Time Machine will not let me restore from backups after June, 2013. I can see the files on the external hard drive but Time Machine skips all of them and goes back to June, 2013. Does anyone have any idea what the problem is?

Time Machine will not let me restore from backups after June, 2013. I can see the files on the external hard drive but Time Machine skips all of them and goes back to June, 2013. Does anyone have any idea what the problem is?

rtilghman wrote:
telling me to buy a new router is NOT a solution.
And why not? Apple is selling these things like BigMacs. They can't make enough of them. You've been suffering since May because you refuse to get a decent router.
Can you imagine if a company that makes a refrigerator told me that I needed to upgrade my electrical system to rectify a problem with their device? What kind of response IS that?!?!
What if the problem with their device is that it requires a new-fangled "grounded" outlet and your circa 1890 house doesn't have grounded outlets. Would you refuse to purchase a $ 25 adapter on principle?

I recently updated to Mountain lion 10.8 . I backuped using external hard drive using time machine . I used Lacie drive. I had to format it MAC OSX " extended journaled" before I could back up my dat and after that I backed it up.

1) I cant seem to restore my data back from Time machine as many files seem Locked. I cant use the Migration app since it doesnt show me my external hard drive when I try to use it. Plus Ive heard that Migration app copies whole drives rather than selecting and copying some folders/data.
2) Even if i use the time machine to restore the data , It does copy on to my mac but that locked symbol is still there .
3) I have read that my drive wont show on migration application cuz the OS should be same before and after the backup and there shouldnt be any difference , otherwise the migration app wont show the drive. This is absurd cuz mostly ppl back up because they want to upgrade their computers . It will never be the same , I mean the OSX , cuz after i have done the back there would have been an upgrade .
Can anyone help Linc Davis .

If you mean you're getting the same message:
see #C3 in Time Machine - Troubleshooting. It will show you how to locate the message(s) that describe the problem, then help you fix it. If that doesn't help, post back with details, including all the messages, your setup (especially the destination for the backups), what you've done, and the results.
If that's not the message you're getting, please clarify.

Using ios8 and I can't update apps nor download podcasts? Have tried all noted solutions, except sync to desktop or reinstall. Is anyone having these issues?p

Using ios8 and I can't update apps nor download podcasts? Have tried all noted solutions, except sync to desktop or reinstall. Is anyone having these issues?p

updated ipad to IOS8,plus itunes 12.0.1,now when click on itunes-devices- no apps, magazines etc are visible except music,movies etc
what have they done?

While starting my iMac after new hard drive installed, I created a admin user, I then pulled over a backup from an external hard drive that brought over the previous admin user settings. Need to merge to old user with the new user

I had to replace the hard drive in my iMac. Upon initial start up, I created a admin user name and password. Then I connected a WD external hard drive that had a back up of my orginal HD. Upon running Migration Assistant and pulling over the back up I found it pulled over the ORIGINAL user & security information from the original hard drive. In order to see iPhoto or iTunes libraies I must sign on to the "Old" user.
I want to Merge old and new users into only 1 user or delete the original user however need to have the iPhoto/iTunes libraies accessable by the "New" user.

Your best bet is to start over, by restoring your entire system to the exact condition it was in. Otherwise, the transferred user account probably won't have permission to its backups. See the pink box in Problems after using Migration Assistant for an explanation.
See Time Machine - Frequently Asked Question #14 for details on how to do the restore.

Anyone having battery issues on iphone 4 after using Garmin 2.0 for a time?, Anyone having battery issues on iphone 4 after using Garmin 2.0 for a time?

Anyone having battery issues on iphone4 after using Garmin 2.0 for a while?

Hi mate. I'm afraid I haven't got a solution, but just wanted to say that I am having the exact same problem in my Lexus. I have an iPhone 5 which was paired and working perfectly while running iOS 6 and then iOS 6.0.1. But I was having all sorts of wifi problems (this is my second iPhone 5 as Apple replaced the first one but I've still got the same wifi issues!) so I had hoped 6.0.2 would fix these bugs. But - as you've found too - it's broken by Bluetooth connection to my car!
I too had tried the same things as you : deleting the profiles etc. but it just won't pair!
If anyone has a solution please help!!

VPN no longer working after iOS 8.0.2 upgrade. Anyone having same issue?

Since I upgraded to iOS 8.0.2, the PPTP VPN configurations no longer connect. I deleted and re-created the settings, but this did not solve the problem. Is there a way of fixing this?

Yes, same problem here. Tested on both 8.0 and 8.0.2. VPN will connect but will not pass traffic from the idevice into the network. I am able to ping the device from inside of my network to its VPN IP address. However, I am not able to get to any internal resources from the device. I have done some of the troubleshooting that is posted above with no success. I have rebooted the device, reset network settings, and I have reset the entire device. I'm testing on an iPhone 5 and an iPad2. I also have an iPhone 4s here that is still on IOS 7 that has a working VPN and can connect to all internal resources as normal. I contacted Apple support yesterday and after speaking with 2-3 people, all of whom acted like this was the first VPN issue they had ever heard about, I was told that a "Senior Support Agent" would contact me back. Right now I have 5 users affected by this issue. Those 5 people will have new Android devices before the End of the day. I have sent an email to the other 60+ IOS users instructing them NOT to update their device until the VPN issue is resolved. I will post any findings here including the phone number and extension of the Apple Support Personnel that I spoke with yesterday if I do not get contacted in a timely fashion. I can understand that a mistake has been made, but this issue is wide-spread and needs to be addressed.

Time machine will not backup to empty external hard drive after replacing Mac's internal hard drive and restoring

First - I live in a tiny fishing village in Belize, so getting support here is virtually non-existent. There is no one else in my village who even uses a Mac. Recently, my hard drive in my 2012 Macbook Pro 13" went bad (said it suffered a "shock"?) and I was traveling to Cozumel, Mexico, so had it replaced there. We used an external hard drive backup to restore the data to it's last time machine backup (October of 2014). Everything was working fine, until I returned home, added some pictures, and wanted to do a fresh backup. Now, time machine will start the backup, but gets about 113,000 of 181,000 done, and it locks up. I can do nothing - everything freezes, and I have to eventually power down the computer. I even tried deleting the old backup from the external hard drive, erasing it completely, and reformatting the external hard drive using disk utility. Still locking up. It is a 5 GB external hard drive, so space shouldn't be an issue, and it was backed up to the same external hard drive previously with no issues. I'm still running Mavericks, and don't want to try to upgrade to Yosemite until I can be sure I have a backup of my old data and pictures. I am a writer, and use that to make my meager living LOL
I'm stumped. I've looked through the files endlessly but can't find anything similar to my issue. Any suggestions? I know just enough to be dangerous, and don't want to lose everything we worked so hard to retrieve when my hard drive crashed last month.
Thanks!

SMH5206 - I tried letting it sit and crank overnight twice. First time I thought it was my error causing it to lock up. Now I know better. I haven't changed any of my time machine settings - and actually never used time machine regularly. Only reason I had a fresh backup from last Oct was because I did one before I upgraded to mavericks. Everything worked fine then - and we used that to restore when the hard drive crashed and was replaced. I have actually deleted hundreds of pictures off my hard drive and one entire user, so it should actually be a much smaller backup - so if it did it before on the same external hard disk, I don't understand why it won't now. I'm really confused.
Kahjot - the external hard drive is the same one I backed up to previously - and I have completely erased it and reformatted, and the information I'm backing up now is less, so there should be no reason why it doesn't have enough room now, when there is actually less information on my current hard drive (see my reply to SMH5206). When I plug it in, it says it is a 500.07 GB WD "My Passport"
I've even tried to have time machine only backup certain files, and not the whole thing. Still locking up.
I'm sure it's my error somewhere, - I just don't know how or where

I am attempting to connect an external hard drive to my airport extreme and see this hard drive under time machine preferences. I used to able to do this under Leopard, but no longer under lion, even after downloading Airport utility 5.6.

Hi, I am attempting to see my extrenal hard drive, connected to my airport extreme base station, in time machine. I formatted the disk, backed up my mackbook pro to it via usb, and now want to be able to backup over wifi with my disk connected to my airport extreme base station. I spoke with Apple Care, and they told me Apple doens't support this. I used to be able to do this with my older MB pro and under older osx's. I do see the external hard drive connected under disks, just not in time machine preferences. Is there a workaround available that anyone is aware of?
Thank you so much,
Tabeer

First sync after restoring hard drive from Time Machine

So, the internal on my iMac went down. Had a new drive installed and restored the whole computer from Time Machine. Prior to the crash, I had my iPhone set in iTunes to sync with an iPhoto album, so I just drag any photos on I want on my phone to that album and sync. Either way, now I'm getting the "iPhone is synced to another photo library...do you want to replace all existing photos and albums on your phone with those from your photo library". This is scary. Any ideas on whether or not this will actually wipe any photos off of my iPhone (especially those taken using the iPhone camera?). I appreciate any help. Thanks.

Because you have a new drive on the computer, it does not recognize the phone. When you go to sync, if you have all of the same information on your computer, it will erase everything on the phone, however it will then replace it all again. When the phone syncs, it places a hidden backup file in folders it syncs to in order to "remember" that is synced it.
As far as pictures taken with the iPhone camera, those are stored in the camera roll, and that has nothing to do with the photo library, which is where photos that you sync from the computer are at. However, if you do have photos in the camera roll, I suggest that you import them to the comptuer as soon as possible, like you would any digital camera. The iPhone is not a storage device, and if something were to happen to the iPhone and you had to restore as new, you would lose those photos.

I just updated to 8.3 and now i cant add events to my calendar an the red icon saying howmany new texts I have does not work. Anyone having same issue?

Anyone having same issue. It is annoying not knowing when I have a new text

Upgrade to Snow Leopard - it's compatible with the latest version of iTunes, and still supports PowerPC applications.
$19.99 - http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Snow Leopard is required if you wanted to upgrade to Lion, anyway, which you may want to in the future if the latest version of iTunes no longer supports Snow Leopard.

After backing up through time machine on external hard drive, how do you access that data?

I backed up my MacBook to an external hard drive through Time Machine. After it was all done and I reconnected the external hard drive to make sure that I could access everything that was backed up, I couldn't get into the data on the external hard drive because it said that it was backed up through Time Machine.
What does this mean? How to I access the data that is on my external hard drive?

There are 2 options.
1) (The Suggested way) With the TM external drive connected Open The Time Machine App in Applications and you can browse what has been backed up.
2) Open Finder and select the drive name on the left then the Backups.backupsdb folder and in there is all your files from the backups you have made listed under your Machine Name and in that folder under the dates/times they were created

My Toshiba external hard drive won't mount after OSX Mavericks update. Please help.

Two days ago I updated to Mavericks 10.9.3 and prior to this, my Toshiba 1TB external hard drive worked perfectly well. Since the update, my hard drive will no longer mount. It shows up in Disk Utility but will not let me 'mount', 'verify disk' or 'repair disk' through Disk Utility. My sister has an identical Macbook Pro which she has not updated to Mavericks. I have tested my hard drive on her laptop and it works just fine. Can anyone tell me how to fix this? Do I need to reformat my hard drive (and if so, will that clear everything on my hard drive?) or is there a simple fix?
Thank you for any assistance you can offer!

Reset the NVRAM/PRAM and Reset the SMC, then try again.

External hard drives won't mount after upgrading to Tiger 10.4.9. Help!

Hi, I've just got the latest iMac. Very excited! I did all the software updates, connected my Western Digital extended hard drive so that I could copy some files over onto my new Mac. It was fine at first. Then when I wanted to open up the external hard drive icon on my desktop again and double clicked on it, everything disappeared from the screen for a few seconds, then reappeared but my external hard drive simply opened the window to my personal hard drive on the Mac. The WD links to my computer via Firewire. I then connected my USB external hard drive stick and it was the same story.
I used Disk Utility to test everything and everything was fine.
I then reinstalled Mac OSX 10.4.8 and plugged in my external hard drives. Everything worked perfectly. After copying over documents and a couple of programs, and downloading a few more programs, I ran my software updates again, upgrading the operating system to Tiger 10.4.9. I attached my external hard drive and it was the same problem all over again.
I the read up the online discussions and also chatted to an Apple dealer, and their advice was to download the Intel Combo and reinstall the operating system. I have just done this and my external hard drives will still not mount properly. Their icons appear on screen but double click them and everything disappears.
Please help. This is really frustrating as I have a backlog of work to do and I seem to be wasting hours on this. Not only that, this is a brand new machine which I rightly expect to work straight away.
I look forward to your response. Thank you in advance.

Hi, try to put your HDD in other Mac and look if appear the same, also you can try to repair permission.

One external hard, drive two macs. Library wont update????

Hello, Sorry if this has been asked before, I could not find anything to answer this, so here i am.
I Have a G5 PPC tower (10.4.11) and an Intel MacBook Pro (10.5.6) and a Lacie 500GB for my iTunes library. I mostly use my PPC while at home, which is where I upload most of my music in to itunes. However after adding music to my itunes library using my PPC if I connect the external hard drive to the macbook pro itunes only sees what it saw last time it was connected.
Just so we understand what I mean let me give you an example: Lets say my itunes library is 20GB on the external drive. I connect the external drive to itunes on my PPC and add 1GB of music. Now my PPC itunes recognizes it as a 21GB library, BUT if I disconnect the drive from my PPC and connect it to the Intel and open itunes it will not see the new 1GB addition and will only show the original 20GB library.
Does that make sense?
The only way I know how to update the library is to drag the entire itunes "music" folder into the preview pane in itunes. Which then results in itunes having to read the entire library again which takes a long time.
Is there any way to make both computers see the addition of music when I move the drive back and fourth?
Thanks
sean

Can I copy the itunes library database file from my PPC to my external hard drive and avoid having to rescan the entire library?
You can copy the entire iTunes folder from the item in the Finder's sidebar named Music, launch iTunes with the Option key held down, click on Choose Library, and navigate to it.
(42459)

Hi everyone, after updating to 10.6.8, i've been unable to backup to my external hard-drive on Time Machine. anyone having same issues?

Similar Messages

Maybe you are looking for