Hi, extract data from xml file and insert into another exiting xml file

i am searching code to extract data from xml file and insert into another exiting xml file by a java program. I understood it is easy to extract data from a xml file, and how ever without creating another xml file. We want to insert the extracted data into another exiting xml file. Suggestions?
1st xml file which has two lines(text1.xml)
<?xml version="1.0" encoding="iso-8859-1"?>
<xs:PrintDataRequest xmlns:xs="http://com.unisys.com/Anid"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://com.unisys.com/Anid file:ANIDWS.xsd">
<xs:Person>
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://com.unisys.com/Anid file:ANIDWS.xsd">
These two lines has to be inserted in the existing another xml(text 2.xml) file(at line 3 and 4)
Regards,
bubbly

Jadz_Core wrote:
RandomAccessFile? If you know where you want to insert it.Are you sure about this? If using this, the receiving file would have to have bytes inserted that exactly match the number of bytes replaced. I'm thinking that you'll likely have to stream through the second XML with a SAX parser and copy information (or insert new information) as you stream with an XML writer of some sort.

Similar Messages

How to read LONG RAW data from one table and insert into another table

Hello EVERYBODY
I have a table called sound with the following attributes. in the music attribute i have stored some messages in the different language like hindi, english etc. i want to concatinate all hindi messages and store in the another table with only one attribute of type LONG RAW.and this attribute is attached with the sound item.
when i click the play button of sound item the all the messages recorded in hindi will play one by one automatically. for that i'm doing the following.
i have written the following when button pressed trigger which will concatinate all the messages of any selected language from the sound table, and store in another table called temp.
and then sound will be played from the temp table.
declare
     tmp sound.music%type;
     temp1 sound.music%type;
     item_id ITEM;
cursor c1
is select music
from sound
where lang=:LIST10;
begin
     open c1;
     loop
          fetch c1 into tmp; //THIS LINE GENERATES THE ERROR
          temp1:=temp1||tmp;
          exit when c1%notfound;
     end loop;
CLOSE C1;
insert into temp values(temp1);
item_id:=Find_Item('Music');
go_item('music');
play_sound(item_id);
end;
but when i'm clicking the button it generates the following error.
WHEN-BUTTON-PRESSED TRIGGER RAISED UNHANDLED EXCEPTION ORA-06502.
ORA-06502: PL/SQL: numeric or value error
SQL> desc sound;
Name Null? Type
SL_NO NUMBER(2)
MUSIC LONG RAW
LANG CHAR(10)
IF MY PROCESS TO SOLVE THE ABOVE PROBLEM IS OK THEN PLESE TELL ME THE SOLUTION FOR THE ERROR. OTHER WISE PLEASE SUGGEST ME,IF ANY OTHER WAY IS THERE TO SOLVE THE ABOVE PROBLEM.
THANKS IN ADVANCE.
D. Prasad

You can achieve this in many different ways, one is
1. Create another VO based on the EO which is based on the dest table.
2. At save, copy the contents of the source VO into the dest VO (see copy routine in dev guide).
3. commiting the transaction will push the data into the dest table on which the dest VO is based.
I understand that if we attach VO object instance to region/page, we only can pull and put data in to only one table.
if by table you mean a DB table, then no, you can have a VO based on multiple EOs which will do DMLs accordingly.Thanks
Tapash

How to get the data from one table and insert into another table

Hi,
We have requirement to build OA page with the data needs to be populated from one table and on save data into another table.
For the above requirement what the best way to implement in OAF.
I understand that if we attach VO object instance to region/page, we only can pull and put data in to only one table.
Thanks

You can achieve this in many different ways, one is
1. Create another VO based on the EO which is based on the dest table.
2. At save, copy the contents of the source VO into the dest VO (see copy routine in dev guide).
3. commiting the transaction will push the data into the dest table on which the dest VO is based.
I understand that if we attach VO object instance to region/page, we only can pull and put data in to only one table.
if by table you mean a DB table, then no, you can have a VO based on multiple EOs which will do DMLs accordingly.Thanks
Tapash

Extract data from xml file and insert into another exiting xml fil

hello,
i am searching extract data from xml file and insert into another exiting xml file by a java program. I understood it is easy to extract data from a xml file, and how ever without creating another xml file. We want to insert the extracted data into another exiting xml file. Suggestions?
Regards,
Zhuozhi

If the files are small, you can load the target file in a DOM document, insert the data from the source file and persist the DOM.
If the files are large, you probably want to use a StAX or SAX.

Read data from E$ table and insert into staging table

Hi all,
I am a new to ODI. I want your help in understanding how to read data from an "E$" table and insert into a staging table.
Scenario:
Two columns in a flat file, employee id and employee name, needs to be loaded into a datastore EMP+. A check constraint is added to allow data with employee names in upper case only to be loaded into the datastore. Check control is set to flow and static. Right click on the datastore, select control and then check. The rows that have violated the check constraint are kept in E$_EMP+ table.
Problem:
Issue is that I want to read the data from the E$_EMP+ table and transform the employee name into uppercase and move the corrected data from E$_EMP+ into EMP+. Please advise me on how to automatically handle "soft" exceptions in ODI.
Thank you

Hi Himanshu,
I have tried the approach you suggested already. That works. However, the scenario I described was very basic. Based on the error logged into the E$_EMP table, I will have to design the interface to apply more business logic before the data is actually merged into the target table.
Before the business logic is applied, I need to read each row from the E$EMP table first and I do not know how to read from E$EMP table.

How to extract data from Hyperion essbase and load into essbase application

Hi Guru,
I want to extract data from hyperion essbase 1 application and then load to another application of hyperion essbase.
Can any one know,how to do this.
Please,suggest LKM and IKM that should be used for this.

Thank you very much John,
I am using Report script method not your least like method(Calc script as you mentioned in your blog)...:)
I don't know how to check logs of essbase.
what is load rule and how to use that?
My ODI version is:10.1.3.6.2
One more think i want to ask you is i don't have hyperion planning as Technology in topology maneger in my ODI.
Though, in my oracledi\lib\scripts\xml directory, i have TECH_HyperionPlanning.xml
So,how to import technology to have this OR I need something else for this....
Edited by: Maulik Vadodariya on 16 Mar, 2011 3:51 PM
Edited by: Maulik Vadodariya on 16 Mar, 2011 4:11 PM
Edited by: Maulik Vadodariya on 16 Mar, 2011 4:14 PM
Edited by: Maulik Vadodariya on 16 Mar, 2011 4:14 PM
Edited by: Maulik Vadodariya on 16 Mar, 2011 4:15 PM

Getting data from some source and insert into corresponding source

hi all,
i am using db10g.
i have like like
MMA : add1:add2:add3'the above said is the format and actual data will be something like
MMA : bank street : no:32 : tel: +9127546663
add1 = bank street
add2 = no:32
add3 = tel: +9127546663 my requirement to store add1,add2 and add3 into the table.
So to take the data i am using substring and instring function to get the data with respect to : my problem is for example in add2 place no:32 is there my task is to fetch the no:32 from that line and store into the table as no:32 only in that case i cannot fetch the value in terms of :.
sincr : is the delimiter(seperator for data element)
how can i solve this issue?
Thanks..
Edited by: user13329002 on Jan 1, 2011 11:37 PM

Your first addr1 is terminated by (:).
your second addr2 is started with (no:), and also terminated by (:)
and third addr3 is started with (tel:).
only the first and third (:) will be used as delimiter, so how about this?
WITH T AS (SELECT 'bank street:no:32:tel:+9127546663' AS STR FROM DUAL)
SELECT SUBSTR(STR, 1, INSTR(STR, ':', 1, 1)-1) AS ADD1,
SUBSTR(STR, INSTR(STR, ':', 1, 1)+1, INSTR(STR, ':', 1, 3)-INSTR(STR, ':', 1, 1)-1) AS ADD2,
substr(str, instr(str, ':', -1, 2)+1) as add3 from t;
bank street no:32 tel:+9127546663Or can`t you just ask the people who gave the requirement to change the delimiter used in the format to something else like pipe (|)?

Fetch data from one table and insert into two tables in desired format

I have similar to the following data in a table and it is not normalized. The groupID is being used to group two records of similar nature.
DECLARE @OldDoc TABLE (oldDocID INT, groupID INT, deptID INT)
INSERT INTO @OldDoc (oldDocID, groupID) VALUES (1, NULL, 111),(2,NULL,111),(3,1,111),(4,NULL,333),(5,1,222),(6,NULL,333),(7,2,222),(8,2,333),(9,NULL,111),(10,3,222),(11,NULL,333),(12,3,444)
I need to process the data from the above table (@OldDoc) and write into two new tables (@NewDoc and @NewDocGroup) as follows.
oldDocID should be stored as newDocID when inserting to @NewDoc table. Only records with groupID NULL and one record (first one) per group should be considered (For example, oldDocID 5 is not considered as 3 and 5 belong to the same groupID 1) for insertion.
DECLARE @NewDoc TABLE (newDocID INT)
INSERT INTO @NewDoc (newDocID) VALUES (1),(2),(3),(4),(6),(7),(9),(10),(11)
All records from @OldDoc should be considered for insertion into @NewDocGroup table. OldDocID is inserted as NewDocID and deptID is as-is. Instead of groupID, the ID of the first record in the
group should be considered as parentNewDocID (For example, 3 is considered as parentNewDocID for newDocID 5 as 3 and 5 belong to the same groupID in @OldDoc table) for the newDocID.
DECLARE @NewDocGroup (newDocID INT, parentNewDocID INT, deptID INT)
INSERT INTO @NewDocGroup (newDocID, parentNewDocID, deptID) VALUES (1,1,111),(2,2,111),(3,3,111),(4,4,333),(5,3,222),(6,6,333),(7,7,222),(8,7,333),(9,9,111),(10,10,222),(11,11,333),(12,10,444)
How do I accomplish the above using SQL ? Thanks for the help.

>> I have similar to the following data in a table and it is not normalized. The group_id is being used to group two records [sic] of similar nature. <<
Rows are not records. Tables have to have a key by definition. You do not do math with identifiers, so they should not be numeric. Let's ignore that error for now. In short, you are posting garbage. If you had followed Forum Netiquette, would you have posted
this?
CREATE TABLE Old_Documents
(old_doc_id INTEGER NOT NULL PRIMARY KEY,
group_id INTEGER,
dept_nbr INTEGER NOT NULL
REFERENCES Departments (dept_nbr));
INSERT INTO Old_Documents(old_doc_id, group_id, dept_nbr)
VALUES (1, NULL, 111),
(2, NULL, 111),
(3, 1, 111),
(4, NULL, 333),
(5, 1, 222),
(6, NULL, 333),
(7, 2, 222),
(8, 2, 333),
(9, NULL, 111),
(10, 3, 222),
(11, NULL, 333),
(12, 3, 444);
>> I need to process the data from the above table (Old_Documents) and write into two new tables (New_Documents and New_Documents_Groups) as follows. <<
Just like punch cards and mag tape data processing! Being old and being new are a status, not another kind of entity. But that is how mag tapes work. And you even use the verb "fetch" from tape files. This design flaw is called attribute splitting.
Do you have a Male_Personnel and Female_Personnel table? NO! It is just Personnel!
>> old_doc_id should be stored as new_doc_id when inserting to New_Documents table. Only records [sic] with group_id NULL and one record [sic] (first [sic; no ordering in a table] one) per group should be considered (For example, old_doc_id 5 is not considered
as 3 and 5 belong to the same group_id =1) for insertion. <<
Think about your punch card mindset. Why did you physically materialize that redundant New_Documents table? Let me answer that: this is how you work with punch cards! In SQL we use a VIEW:
CREATE VIEW New_Documents (new_doc_id)
AS
SELECT old_doc_id
FROM Old_Documents;
>> All records [sic] from Old_Documents should be considered for insertion into New_Documents_Groups table. The old_doc_id is inserted as new_doc_id and dept_nbr is as-is. Instead of group_id, the ID [sic: which identifier??] of the first [sic: tables
have no ordering like a deck of punch cards] record [sic] in the group should be considered as parent_new_doc_id (For example, 3 is considered as parent_new_doc_id for new_doc_id 5 as 3 and 5 belong to the same group_id in Old_Documents table) for the new_doc_id.
<<
Why not use 5 as the parent? My guess is that you are trying to form equivalence classes. See:
https://www.simple-talk.com/content/print.aspx?article=2020
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL

Fetch data from two tables and insert into one table

I have similar to the following data in two tables (@Plant, @PlantDirector) and need to consolidate into one table (@PlantNew) as follows.
DECLARE @Plant TABLE (PlantID INT, PlantName VARCHAR(100))
INSERT INTO @Plant (PlantID, PlantName) VALUES (1, 'Name One'),(2, 'Name Two'),(3, 'Name Three'),(4, 'Name Four'),(5, 'Name Five'),(6, 'Name Six')
Director data for the Plants exist in the following table. Assistant value 1 means Assistant Director and 0 means Director.
Data exists only for subset of plants and a Plant may have one or both roles.
DECLARE @PlantDirector TABLE (PlantID INT, PlantDirectorID INT, Assistant bit)
INSERT INTO @PlantDirector (PlantID, PlantDirectorID, Assistant) VALUES (2, 111, 1),(2, 222, 0),(4, 333, 0),(6,444,1)
The above data needs to be inserted into one table (@PlantNew) as follows:
PlantID in @Plant table is IDENTITY value and needs to be inserted as-is into this table.
PlantDirExists will get a value of 1 if at least one record exists in @PlantDirector table for a PlantID. PlantAssistantDirID and PlantDirID should be set to the corresponding PlantDirID or NULL appropriately depending on the data.
DECLARE @PlantNew TABLE (PlantID INT, PlantName VARCHAR(100), PlantDirExists bit, PlantAssistantDirID INT, PlantDirID INT)
INSERT INTO @PlantNew (PlantID, PlantName, PlantDirExists, PlantAssistantDirID, PlantDirID)
VALUES (1, 'Name One', 0, NULL, NULL),(2, 'Name Two', 1, 111, 222),(3, 'Name Three', 0, NULL, NULL),(4, 'Name Four', 1, NULL, 333),(5, 'Name Five', 0, NULL, NULL),(6, 'Name Six',1, 444, NULL)
How do I achieve the above using SQL ? Thanks.

like this
INSERT @PlantNew (PlantID, PlantName, PlantDirExists, PlantAssistantDirID, PlantDirID)
SELECT p.PlantID,
p.PlantName,
CASE WHEN pd.PlantID IS NULL THEN 0 ELSE 1 END,
PlantAssistantDirID,
PlantDirID
FROM @Plant p
LEFT JOIN (SELECT PlantID,
MAX(CASE WHEN Assistant = 1 THEN PlantDirectorID END) AS PlantAssistantDirID,
MAX(CASE WHEN Assistant = 0 THEN PlantDirectorID END) AS PlantDirID
@PlantDirector
GROUP BY PlantID)pd
ON pd.PlantID = p.PlantID
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs
You're missing a FROM
insert into @PlantNew
SELECT p.PlantID,
p.PlantName,
CASE WHEN pd.PlantID IS NULL THEN 0 ELSE 1 END,
PlantAssistantDirID,
PlantDirID
FROM @Plant p
LEFT JOIN (SELECT PlantID,
MAX(CASE WHEN Assistant = 1 THEN PlantDirectorID END) AS PlantAssistantDirID,
MAX(CASE WHEN Assistant = 0 THEN PlantDirectorID END) AS PlantDirID
from @PlantDirector
GROUP BY PlantID)pd
ON pd.PlantID = p.PlantID

Combine data from a table and insert to another in comma separated format

In my SQL database table i have some data as shown below.
KNO Course Grade Institution
124 BTECH First IIT Calicut
128 BE First KKS Institute
124 CCNA Q NIIT Delhi
124 DDCN Q Appl Calicut
128 DIT A NIIT Delhi
128 VB Q IICM Delhi
i want this courses to be arranged as sample given under to a table named mainpers
KNO Course
124 BTECH[First], CCNA[Q],DDCN[Q]
128 BE[First], DIT[A], VB[Q]
I am a System Administrator at Vadodara

You can do this in SQL.
with cte as (
select distinct KNO
from Table1
select KNO
, Stuff(
(select ',' + Course + '[' + Grade + ']'
from Table1
where Table1.KNO = cte.KNO
for xml path ('')
), 1, 1, '') as Course
from cte
http://davidduffett.net/post/5334646215/get-a-comma-separated-list-of-values-in-sql-with-for
Russel Loski, MCT, MCSE Data Platform/Business Intelligence. Twitter: @sqlmovers; blog: www.sqlmovers.com

How to extract data from xml and insert into Oracle table

Hi,
I have a large xml file. which will have hundreds of the following transaction tags having column names and there values.
There is a table one of the schema with coulums "actualCostRate","billRate"....etc.
I need to extract the values of these columns and insert into the table
<Transaction actualCostRate="0" billRate="0" chargeable="1" clientID="NikuUK" chargeCode="LCOCD1" externalID="L-RESCODE_UK1-PROJ_UK_CNT_GBP-37289-8" importStatus="N" projectID="TESTPROJ" resourceID="admin" transactionDate="2002-02-12" transactionType="L" units="11" taskID="5017601" inputTypeCode="SALES" groupId="123" voucherNumber="ABCVDD" transactionClass="ABCD"/>
<Transaction actualCostRate="0" billRate="0" chargeable="1" clientID="NikuEU" chargeCode="LCOCD1" externalID="L-RESCODE_US1-PROJ_EU_STD2-37291-4" importStatus="N" projectID="TESTPROJ" resourceID="admin" transactionDate="2002-02-04" transactionType="L" units="4" taskID="5017601" inputTypeCode="SALES" groupId="124" voucherNumber="EEE222" transactionClass="DEFG"/>

Re: Insert from XML to relational table
http://www.google.ae/search?hl=ar&q=extract+data+from+xml+and+insert+into+Oracle+table+&btnG=%D8%A8%D8%AD%D8%AB+Google&meta=

How to extract data from XML file with JavaScript

HI All
I am new to this group.
Can anybody help me regarding XML.
I want to know How to extract data from XML file with JavaScript.
And also how to use API for XML
regards
Nagaraju

This is a Java forum.
JavaScript is something entirely different than Java, even though the names are similar.
Try another website with forums about JavaScript.
For example here: http://www.webdeveloper.com/forum/forumdisplay.php?s=&forumid=3

Extract data from XML file to Oracle database

Dear All
Please let me know, how to extract data from XML file to Oracle database which includes texts & images.
Thanking You
Regards Lakmal Marasinghe

I would do it from the database, but then again, I am a database / PL/SQL guy.
IMHO the database will deliver you with more options. I don't know about "speed" between the two.

Extracting data from XML

Im fairly new to XML & web services so bear with me please.
Im trying to extract data from XML documents where the structure/element names are unknown.
The condition for extracting data is if keyword matches some data content.
Im using Java and the DOM API with xcerces and I've managed to parse the XML file, what I need to do next is to traverse the data content checking against keywords and if a keyword matches then to strip the tags and save the data locally ?
Ive trawled through all the documentaion but as theres so many different methods Im somewhat unsuare which is the best way to proceed.
thanks

tough question, i would suggest looking at jdom as solution for you, because it is a relatively simple one to use for searching through a dom. aside from that, its probably up to you what sort of logic you want to use.

Extracting data from xml spreadsheet for JSP

Hi,
Currently i am developing a web application where user can upload a MS excel file, then the application will extract data needed and store into database. But facing problems where those excel files may content massive images that make the file size too large to be upload on to the web. Now i try to export those excel files into xml spreadsheet, to get only text data. Need helps on how to extract data from xml spreadsheet. Which API needed?
Thanks

Without getting into too much detail, a DTD defines the elements that can appear in an xml file, the order they can appear in, which elements can be nested within which other elements, what each element can contain, etc, etc. In short, a DTD defines the structure of the xml file and Microsoft defined a DTD for the xml files that are output by Excel.
This is not taken from an xml file produced by Excel but DTDs look a llittle like this very basic example.
<!DOCTYPE note [
<!ELEMENT note (to,from,heading,body)>
<!ELEMENT to      (#PCDATA)>
<!ELEMENT from    (#PCDATA)>
<!ELEMENT heading (#PCDATA)>
<!ELEMENT body    (#PCDATA)>
]>If you open the one produced for you by Excel in Wordpad or another simple text editor, you may see something like this in there.
However, if you are going to use a parser to access the file for you do not worry about getting to grips with DTDs for a short, simple project.

Hi, extract data from xml file and insert into another exiting xml file

Similar Messages

Maybe you are looking for