Hi Friends... I'm trying to delete a back-up file on mu TC but I get the message "The operation could not be completed because the item "bands" is in use. I'd like to start the Back from scratch, could help me out with deleting the current file?
Hi Friends...
I’m trying to delete a back-up file on mu TC but I get the message “The operation could not be completed because the item “bands” is in use. I’d like to start the Back from scratch, could help me out with deleting the current file?
Sorry, I am very confused. I asked the following question....
Is this the only backup file on your Mac, or do you have other backup files and data on the Time Capsule disk?
The answer that you gave was....
This is the only one
Now you are saying that....
But I have lots of other files on Time Capsule! The back up file is only one of them.
Can you clarify, please?
Similar Messages
-
The operation could not be completed because an item with the name xyz already exists
I am trying to make a click and drag backup on an external FAT 32 drive to compliment my Time Machine backup (long story) and I've done this each time by dragging my critical folders into the drive. I get a message asking me to stop, replace or skip, and whether to apply to all items. i click replace, apply all, and let it go.
however, one stubborn folder refuses to comply. every single time I click and drag a group of folder that includes that one, I get a message saying "the operation could not be completed because an item with the name xyz already exists" even after I selected the the "apply all" prompt. at which point, the Mac stops transferring ALL the other files.
I figured, OK, i'll just transfer the other folders individually and then deal with this folder later. so I do that, and once I get to the offending folder, I try to transfer just that one folder into the drive. no good; I get the operation message again. I decide to just transfer the contents of the folder, rather than the folder itself. No good, I just get the operation message about one of the folders within the main folder.
anyone know the cause, or at least a fix?If you've installed a system modification called "TotalFinder," remove it according to the developer's instructions after backing up all data. Log out, log back in, and try again.
Otherwise, open the Info dialog on both the source and the destination volumes. What is the Format of each? For example, it might be "Mac OS Extended (Journaled)".
For some other possible solutions, see:
operation can't be completed because an...: Apple Support Communities -
I used a backup hard drive for my previous PC, but I have not done a backup on my MacBook yet, which I got this summer. When I hooked it up to my computer, it started the backup fine, and then my computer went to sleep, and so I closed it to let it back up overnight. The next morning I saw that it had been interrupted, and that an error occurred; the backup could not be completed because there was an error in creating the backup folder. I'm not sure what to do now because my data has been erased off of my hard drive now to prepare for the backup on my MacBook, but will I be able to use this hard drive again? Will the error message always come up? Is there anything I can do to fix it?
I am always suspicious of using a different OS to the one that was used to run the backup.. ie if you used Snow L to backup then there is absolutely nothing wrong with using SL to restore.
Mount the TC sparsebundle and verify it using disk utility.
A5 here. http://pondini.org/TM/Troubleshooting.html
You might also like to load the widget in Time Machine so you get whatever the full error message is..
I cannot find any reference to the error code you are getting..
My recommendation would be to try it on a different computer.. restore the whole backup to an external drive large enough to accept the whole backup.
Use the manual methods pondini recommends.
http://pondini.org/TM/FAQ.html
Q16 17
Use ethernet only. Turn off wireless so it does not enter the situation. -
I cannot email photos from within iPhoto (v. 9.5.1). When I hit send I get a message: "Your email did not go through because the server did not reply." This happens for both my iCloud account and my Shaw account. What to do???
Are you able to email from Mail with those two accounts? If so:
1 - go to iPhoto's Accounts preference pane and delete both accounts. Now add them back and try again.
2 - a better solution IMO is to set Mail as the email client for iPhoto is iPhoto's General preference pane. This gives you better access to your contacts, a sent copy of all emails and, if you want a layout similar to iPhoto's, photo layouts located in Mail's stationary. -
I did try in all of them and it doesnt work it apears like that........
The share operation Master File has failed
The operation could not be completed because an error occurred when creating frame 608 (error -1).
and i dont know what to do plese hlp me....
Re: when i try to share my project to quicktime aroun 50% appears error -1 and i can't share it what to do please helpDouble post…
-
The following error comes up when I try to install the updated Firefox:
"The operation can’t be completed because some items had to be skipped. For each item, choose File > Get Info, make sure “Locked” is deselected, and then check the Sharing & Permissions section. When you are sure the items are unlocked and not designated as Read Only or No Access, try again."
When I follow the instructions in the error message, it shows that my user name has read and write access. There are a couple other items that are read only. I tried to change this to read and write, but the Sharing and Permissions options are greyed out and will not let me change them. What is the work around for this? I would really like to install the new firefox.
Thanks.Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default('''This will NOT delete profile info such as bookmarks and history'''):
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Thank you. -
Hi Apple community!
I have a [rather worrying] problem.
When I try to copy all my files from my documents on my mac [or the entire documents folder] into an external drive, I get this error message
" The operation can’t be completed because an item with the name “.DS_Store” already exists. "
I am not given an option to skip this file or anything else.
But I simply cannot complete the operation!
I have tried deleting a few of the .ds_store files, [both in the original and in the destinations]
but no success.
The same thing keeps happening.
At first, this was just happening when I was trying to backup to my dropbox folder [the one on my mac's harddrive, which gets synced to the cloud],
but then I tried to back up my documents to my external hard drive, and I realized it is giving me the same error message.
So effectively, it seems I cannot backup my files anywhere!
Any help or advice would be greatly appreciated.
Thank you.Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
I have a user on an iMac 10.6 connected to our domain. She uses Outlook web access for email on our exchange server. Last week she received the following message which is randomly preventing her from sending emails. She claims no attachment was involved in the original email when this all started. I have not been able to look at her account as she is out of the office but maybe someone else dealt with this issue. I realize this may not be Mac related but thought I'd give it a try. She did say it occurred once over two days while working on a PC but it continued over the past weekend.
If an internal user tries to send a message with infected attachment using Outlook Web Access, it may report the following error message: The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, contact technical support for your organization.
This is because F-Secure Anti-Virus for Microsoft Exchange has detected a virus in the attachment. If the user tries to send the message again, the message will be sent but without the attachment. At the same time a blank message with an attachment named "Attachment_information.txt" will remain in the user's Drafts folder. The "Attachment_information.txt" will contain information about the virus detected in the message.PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!! -
Post Author: sagimann
CA Forum: Deployment
Hello,
I'm not sure if this is due to bad deployment, but I suspect it is, at least due to bad environment.
My env is:
Solaris 10 64 bit
Oracle 10g client installed under /opt/oracle/app/oracle/product/10.2.0/client_1
BOXIR2 + FP2.6 installed under /opt/reporting, running under user 'bouser'. by the way, 'tnsping' works via that user.
Important bouser env:
ORACLE_HOME=/opt/oracle/app/oracle/product/10.2.0/client_1
TNS_ADMIN=$ORACLE_HOME/network/admin
LD_LIBRARY_PATH=$ORACLE_HOME/lib:$ORACLE_HOME/lib32
I reboot the box, then start BO like so:
cd /opt/reporting/bobje
. setup/env.sh
./mysqlstartup.sh
./startservers
./tomcatstartup
Then, I import a BIAR file with some reports, and whenever I try to open any report via infoview, I get a gray error message INSTEAD of the input param form:
Error:
Your request could not be completed because a failure occurred while the report was being processed. Please contact your system administrator.
This does not occur in our BOXIR2 on Windows, which is why I'm guess it's a deployment/env issue. The main obstacle I have is: how do I diagnose this? there's nothing in the bobje/logging folder, nothing in the /var/adm/message file except for the following line:
May 5 15:23:23 testbox1 boe_pagesd[3865]: [ID 253862 user.error] A failure occurred while the Page Server was processing report 'test report' (id=777) for user Administrator
pls advise,
thank you.The solution is to turn off the printer preference (bottom of Page Setup screen) in the Crystal Report before uploading to the Server. Thanks to: http://pinchii.com/home/2011/12/error-adding-reports-to-crystal-reports-server/
The explanation, from a comment in the above linked blog post:
"To elaborate more on the error, what basically happens is that the Crystal Reports engine tries to get the status of the u201Creport printeru201D aka u201Cdefault printeru201D which was present on the system when the report was created, but the printer does not exist anymore. This causes the Crystal engine to error out. By setting the report to u201CNo Printeru201D, it tells the Crystal Engine not to look for that report printer when opening the report."
Edited by: abirdman on Feb 3, 2012 9:49 PM -
I am using a portable USB storage drive connected to my laptop. I am trying to delete a file from the USB drive but it is not working. A pop up window appears that says "Sorry the operation could not be completed because an unexpected error occured (Error code -61)". What does that mean and how do I fix it? Thank you.
All I can tell you is that is a write permissions error. How is this drive formatted? Check the file's permissions. You can try:
Open the Terminal application in the Utilities folder. At the prompt enter:
sudo rm -rf
Leave a space after "-rf" and drag the file into the Terminal window. Press RETURN. You will be prompted to enter your admin password which will not be echoed. -
Help, I need to solve. No speculation please bomas or attempts to restart, confirm that the HD is formatted for MAC and etc. .....
Whenever I try to copy my files from my HDD Western Digital 2T for my new Iomega UltraMax 4Q PLUS the following message appears: The operation can not be completed because the item "FILE NAME" is in use. "
I can not stand it anymore ...
I need to work and not temnho more space on my machine.
Scenario - iMac11, 10.6.8 + WD + 2 + 2T 4T Iomega UltraMax Plus, formatted for both Mac and connected via Firewire 800
Trying to copy the message aborts the copy - "The operation can not be completed because the item" FILE NAME "is in use."Hello,
As I said earlier, properly formatted for Mac.
Mac OS Extended (Journaled)
This HD is formatted for MAC factory, but I even did a few times in my attempts I can say that this is entirely correct formattingwith it - Mac OS Extended (Journaled) -
The operation can't be completed because backup items can't be modified.
In my Time Machine backup, I have also stored backups from my previous Mac. They do not appear in the "Star Wars" screen. When I try to delete files I receive the message: "The operation can’t be completed because backup items can’t be modified."
What does this mean, and is there a way to delete said files?
(My Time Machine backup is plugged in and running. The files are not even sent into the Trash, so my question doesn't relate to whether the files will delete from the trashcan, etc.)
Many thanks in advance for any and all help!While in Time Machine, press the key combination shift-command-C. The front window will show all mounted volumes. All snapshots should now be accessible. Select the one you want and navigate to the files you want to delete. Right-click or control-click an item. From the popup menu, select Delete All Backups of... Confirm. Exit Time Machine.
-
Major headaches with copying files and folders between drives. I constantly (and I mean constantly) have to resort to copying files across in small batches (fewer than 10 works best) because anytime I try to copy lots of files and folders from my mac to an external hard drive (or from one external HD to a second external HD), I ALWAYS get the error message "The operation can't be completed because an item with the name .DS_Store already exists".
The files and folders are all Mac-generated, so hint or trace of foreign OSs in the mix.
All file types are susceptible
the HDs are all Mac OS X formatted, no foreign file formats involved
the HDs are all journal-enabled, OS X extended formats
have looked on here for previous posts, past suggestion was to disable creation of DS_Store files - not really a solution and realistically, defeats the purpose of their creation
any ideas anyone?
would appreciate any thoughts or sugestions, this has got me beat
the context is that I have a lot of image files that I am copying (trying to...) new external 3TB drives for backup and the job appears endless if I have to do this in batches of 10 or so..!
many thanks for any suggestionsThis is definitively a nuisance. When copying large amounts of files between volumes try opening a terminal window and use use ditto. You need to type the directory paths of the source and the destination volume. When it starts ditto just coupes and optionally overwrites anything on the destination. You can get a verbose mode where it lists all activities.
gunnars-mac-mini-i7:Volumes gunnar$ man ditto
NAME
ditto -- copy directory hierarchies, create and extract archives
SYNOPSIS
ditto [-v] [-V] [-X] [<options>] src ... dst_directory
ditto [-v] [-V] [<options>] src_file dst_file
ditto -c [-z | -j | -k] [-v] [-V] [-X] [<options>] src dst_archive
ditto -x [-z | -j | -k] [-v] [-V] [<options>] src_archive ... dst_directory
ditto -h | --help -
After upgrading from 10.7.5 to 10.8.3 I cannot copy certain folders to any external drive. the operation can't be completed because an item with the name .ds_store exists. I have seen this problem in discussions for many years with no real solution. Does anyone have a resolution? Please help. This is very frustrating as I work in two locations and copy folders back in forth all the time.
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
I have been trying to find a solution to this problem by browsing this forum but I can't seem to find a solution.
As many others have decided to do I want to copy my Aperature library to an external FW 800 drive as my laptop space is dwindling. It seems all you need to do is copy the Library from the finder which can also be revealed in the preference if Aperature. When copying it seems to transfer for a few seconds but then I get this error "The operation can’t be completed because an item is being modified." I have formatted the drive correctly and there is no issues with Aperature itself so why do you think I am having this error? What can I do to copy this Library to my external?Reboot your machine make sure Aperture doesn't start (as Lion is liable to do) and try it.
Maybe you are looking for
-
Error message "No business partner could be created for vendor ..."
Dear experts, I had made all the customizing settings for BP and CVI vendor/customer - BP integration and synchronization settings before. BP creation from vendor and usage within Real Estate was working with no problems. When i tried to create a new
-
I have a Canon 550D and a class 6 Sandisk extreme 3 card which I have been taking great photos and film clips. Yesterday I captured some content and when I put it into my macbook pro, the images were clear as per usual however the videos only appeare
-
Hi guys!! I have some questions about the iBooks 2 Store and the iBooks Author, please help me further with them. 1. Can anyone post self-made books for sale or for free download in iBooks 2 Store? (For example, students at a school that has made boo
-
hi all, We have a requirement in our project to poll some 28 sub-folders and as soon as a file is placed in any of the folders, we need to place it in a JMS queue (one queue for all the sub-folders). Currently, we have used 28 file adapters and corre
-
Difference in Sync Adapter and Power Adapt
Does the charging times differ for my ZV:M?