Hi gurus in ALV how to edit the fields on out put list
hi gurus in ALV how to edit the fields on out put list
hi
REPORT ZSB_ALV_EDITABLE_SAMPLE.
TABLES: SFLIGHT.
DATA: gc_container TYPE scrfname VALUE 'LIST_AREA',
gc_custom_container TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
gc_grid TYPE REF TO CL_GUI_ALV_GRID,
gs_layout TYPE LVC_S_LAYO,
gt_fieldcat TYPE LVC_T_FCAT.
DATA: ok_code TYPE SY-UCOMM.
DATA: gt_outtab TYPE TABLE OF SFLIGHT.
*DYNPRO
CALL SCREEN 100.
*& Module STATUS_0100 OUTPUT
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS '100'.
CREATE OBJECT gc_custom_container
EXPORTING
container_name = gc_container
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6.
CREATE OBJECT gc_grid
EXPORTING
i_parent = gc_custom_container
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
OTHERS = 5 .
PERFORM prepare_field_catalog CHANGING gt_fieldcat .
PERFORM prepare_layout CHANGING gs_layout .
PERFORM get_alv_display.
ENDMODULE.
*& Module USER_COMMAND_0100 INPUT
MODULE USER_COMMAND_0100 INPUT.
OK_CODE = SY-UCOMM.
IF OK_CODE = 'BACK'.
SET SCREEN 0.
LEAVE SCREEN.
CLEAR OK_CODE.
ENDIF.
ENDMODULE.
FORM prepare_field_catalog CHANGING gt_fieldcat TYPE LVC_T_FCAT.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
I_BUFFER_ACTIVE =
I_STRUCTURE_NAME = 'SFLIGHT'
I_CLIENT_NEVER_DISPLAY = 'X'
I_BYPASSING_BUFFER =
I_INTERNAL_TABNAME =
CHANGING
ct_fieldcat = gt_fieldcat[].
ENDFORM.
FORM prepare_layout changing p_gs_layout TYPE lvc_s_layo.
p_gs_layout-zebra = 'X'.
p_gs_layout-edit = 'X'.
ENDFORM. " prepare_layout
FORM get_alv_display .
SELECT * FROM sflight INTO TABLE gt_outtab UP TO 10 ROWS.
CALL METHOD gc_grid->set_table_for_first_display
EXPORTING
I_STRUCTURE_NAME = 'SFLIGHT'
IS_LAYOUT = gs_layout
CHANGING
it_outtab = gt_outtab
IT_FIELDCATALOG = gt_fieldcat
ENDFORM. " get_alv_display
Similar Messages
-
How to install the OS with out putting in all of your personnel info?
I am ready to sell my MDD Mac. I want it to have a fresh load of 10.5 and 9.2. How do you stop the installation before you enter your name, IP, email address etc? When I first received my Mac 10.2 was installed and waiting for me to enter my personnel data. I want it in the same condition when my buyer receives it.
Bobafter you finish an erase and install reboot as prompted. upon reboot Setup Assistant will start. quit it using Command+q on the very first screen and shut down.
Message was edited by: V.K. -
How to Edit the CheckBox in Classic ALV GRID Display
Hi,
I want to Edit the checkbox in Grid Display.
I have one checkbox field in my internal Table,
Code Of the Program,
Data :
Begin of itab occurs 0,
CHK type C,
MATNR like MARA-MATNR,
end of itab.
Iam building the fieldcatelog using Merge Funcion module.
After that I am chaning the properties of the field
catelog like below,
loop at I_FCAT assigning <FCAT>.
Case <FCAT>-Fieldname
When 'CHK'.
<FCAT>-Checkbox = 'X'.
<FCAT>-INPUT = 'X'.
I dont have edit option in fieldcatelog.
modify I_FCAT from <FCAT>.
endcase.
endloop.
In the Layout,
I_LAYOUT-box_fieldname = 'CHK'.
I_LAYOUT-box_tabname = 'ITAB'.
It is displaying the Checkbox field.but I couldnt edit the checkBox.
I can able to edit in REUSE_ALV_LIST_DISPLAY.
But I have to use REUSE_ALV_GRID_DISPLAY.How to edit the checkbox.
Thanks in Advance,
SumithraHi vasu,
The below procedure explains you to create a checkbox cloumn in the grid and allows you to edit i hope this will helps u.
The ALV Grid Control displays the cells of a column as checkboxes if the column is marked as a checkbox column in the field catalog.
Add another field to the output table in which you want to display checkboxes
OR
Define an existing field as a checkbox.
Procedure
1. Add a field to your output table:
Data: gt_fieldcat type lvc_t_fcat.
Types: begin of gs_outtab.
Types: checkbox type c. "field for checkbox
Include structure <ABAP Dictionary structure> .
Types: end of gs_outtab.
Data: gt_outtab type gs_outtab occurs 0 with header line.
2 * Add an entry for the checkbox to the field catalog
clear ls_fcat.
ls_fcat-fieldname = 'CHECKBOX'.
* Essential: declare field as checkbox and
* mark it as editable field:
ls_fcat-checkbox = 'X'.
ls_fcat-edit = 'X'.
* do not forget to provide texts for this extra field
ls_fcat-coltext = text-f01.
ls_fcat-tooltip = text-f02.
ls_fcat-seltext = text-f03.
append ls_fcat to gt_fieldcat.
regards,
venu. -
To edit the field in the ALV report
Hi,
i want to edit the field of the ALV report what i need to do for that..
Thanks & Regards
Ashu Singhhi,
check the code,
REPORT zalv_fcat.* Output table T006 structure declarationTYPES : BEGIN OF ty_t006.
INCLUDE STRUCTURE t006.
TYPES : END OF ty_t006.*Internal table and wa declaration for T006
DATA : it_t006 TYPE STANDARD TABLE OF ty_t006,
wa_t006 TYPE ty_t006.*declarations for ALV
DATA: ok_code TYPE sy-ucomm,
fieldcatalog for T006
it_fielcat TYPE lvc_t_fcat,
fieldcatalog for fieldcatalog itself:
it_fielcatalogue TYPE lvc_t_fcat,
it_layout TYPE lvc_s_layo.*declaration for toolbar function
DATA: it_excl_func TYPE ui_functions.
Controls to display it_t006 and corresponding fieldcatalog
DATA: cont_dock TYPE REF TO cl_gui_docking_container,
cont_alvgd TYPE REF TO cl_gui_alv_grid.*controls to display the fieldcatalog as editable alv grid and container
DATA: cont_cust TYPE REF TO cl_gui_custom_container,
cont_editalvgd TYPE REF TO cl_gui_alv_grid.*intialization event
INITIALIZATION.*start of selection event
START-OF-SELECTION.
LOCAL CLASS Definition for data changed in fieldcatalog ALV
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
METHODS handle_data_changed
FOR EVENT data_changed OF cl_gui_alv_grid
IMPORTING er_data_changed.
ENDCLASS. "lcl_event_receiver DEFINITION
LOCAL CLASS implementation for data changed in fieldcatalog ALV
CLASS lcl_event_receiver IMPLEMENTATION.
METHOD handle_data_changed.
ENDMETHOD. "handle_data_changed
ENDCLASS. "lcl_event_receiver IMPLEMENTATION*data declaration for event receiver
DATA: event_receiver TYPE REF TO lcl_event_receiver.*end of selection event
END-OF-SELECTION.*setting the screen for alv output for table display and
*changed fieldcatalalogue display
SET SCREEN 600.
On this statement double click it takes you to the screen painter SE51. Enter the attributes
*Create a Custom container and name it CCONT and OK code as OK_CODE.
*Save check and Activate the screen painter.
*Now a normal screen with number 600 is created which holds the ALV grid.
PBO of the actual screen , Here we can give a title and customized menus
*Go to SE41 and create status 'STATUS600' and create THE function code 'SUBMIT'
*and 'EXIT' with icons and icon texts
Also create a TitleBar 'TITLE600' and give the relevant title.&----
*& Module STATUS_0600 OUTPUT
MODULE status_0600 OUTPUT.
SET PF-STATUS 'STATUS600'.
SET TITLEBAR 'TITLE600'.
CREATE ALV GRID CONTROL IF DOES NOT EXISTS INITIALLY
IF cont_dock IS INITIAL.
PERFORM create_alv.
ENDIF.ENDMODULE. " STATUS_0600 OUTPUT* PAI module of the screen created. In case we use an interactive ALV or
*for additional functionalities we can create OK codes and based on the
*user command we can do the coding as shown below
*& Module USER_COMMAND_0600 INPUT
MODULE user_command_0600 INPUT.
CASE ok_code.
WHEN 'SUBMIT'.
*TO GET THE CURRENT FIELDCATALOGUE FROM THE FRONTEND
CALL METHOD cont_alvgd->set_frontend_fieldcatalog
EXPORTING
it_fieldcatalog = it_fielcat.
*refresh the alv
CALL METHOD cont_alvgd->refresh_table_display.
*to Send Buffered Automation Queue to Frontend
CALL METHOD cl_gui_cfw=>flush.*Exit button clicked to leave the program
WHEN 'EXIT'.
LEAVE PROGRAM. ENDCASE.ENDMODULE. " USER_COMMAND_0600 INPUT&----
*& Form CREATE_ALV
&----FORM create_alv.*create a docking container and dock the control at the botton
CREATE OBJECT cont_dock
EXPORTING
dynnr = '600'
extension = 100
side = cl_gui_docking_container=>dock_at_bottom.*create the alv grid for display the table
CREATE OBJECT cont_alvgd
EXPORTING
i_parent = cont_dock.*create custome container for alv
CREATE OBJECT cont_cust
EXPORTING
container_name = 'CCONT'.
*create alv editable grid
CREATE OBJECT cont_editalvgd
EXPORTING
i_parent = cont_cust.* register events for the editable alv
CREATE OBJECT event_receiver.
SET HANDLER event_receiver->handle_data_changed FOR cont_editalvgd. CALL METHOD cont_editalvgd->register_edit_event
EXPORTING
i_event_id = cl_gui_alv_grid=>mc_evt_modified.*building the fieldcatalogue for the initial display
PERFORM build_fieldcat CHANGING it_fielcat it_fielcatalogue.*building the fieldcatalogue after the user has changed it
PERFORM change_fieldcat CHANGING it_fielcatalogue.*fetch data from the table
PERFORM fetch_data.* Get excluding functions for the alv editable tool bar APPEND cl_gui_alv_grid=>mc_fc_loc_append_row TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_loc_insert_row TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_loc_cut TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_sort TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_sort_asc TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_sort_dsc TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_subtot TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_sum TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_graph TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_info TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_print TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_filter TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_views TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_mb_export TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_mb_sum TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_mb_sum TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_mb_paste TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_find TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_loc_copy TO it_excl_func.
*Alv display for the T006 table at the bottom
CALL METHOD cont_alvgd->set_table_for_first_display
CHANGING
it_outtab = it_t006[]
it_fieldcatalog = it_fielcat[].
optimize column width of grid displaying fieldcatalog
it_layout-cwidth_opt = 'X'.* Get fieldcatalog of table T006 - alv might have
modified it after passing.
CALL METHOD cont_alvgd->get_frontend_fieldcatalog
IMPORTING
et_fieldcatalog = it_fielcat[].to Send Buffered Automation Queue to Frontend CALL METHOD cl_gui_cfw=>flush. Display fieldcatalog of table T006 in editable alv grid
CALL METHOD cont_editalvgd->set_table_for_first_display
EXPORTING
is_layout = it_layout
it_toolbar_excluding = it_excl_func
CHANGING
it_outtab = it_fielcat[]
it_fieldcatalog = it_fielcatalogue[].
ENDFORM. " CREATE_alv
*& Form fetch_data
FORM fetch_data.* select data of T006
SELECT * FROM t006 INTO TABLE it_t006 UP TO 50 ROWS.
ENDFORM. " fetch_data
*& Form BUILD_FIELDCAT
FORM build_fieldcat CHANGING it_fldcat TYPE lvc_t_fcat
it_fcat TYPE lvc_t_fcat.
Fieldcatalog for table T006: it_fldcat
to generate the fields automatically CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
i_structure_name = 'T006'
CHANGING
ct_fieldcat = it_fldcat[]
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.*----
Fieldcatalog for table LVC_T_FCAT:it_fcat
Generate fieldcatalog of fieldcatalog structure.
This fieldcatalog is used to display fieldcatalog 'it_fldcat'
on the top of the screen. CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
i_structure_name = 'LVC_S_FCAT'
CHANGING
ct_fieldcat = it_fcat[]
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " BUILD_FIELDCAT
*& Form CHANGE_FIELDCAT
*after the user has modified the fieldcatalogue we build another fieldcat
*for the modified alv display
FORM change_fieldcat CHANGING it_fcat TYPE lvc_t_fcat. DATA ls_fcat TYPE lvc_s_fcat. LOOP AT it_fcat INTO ls_fcat.
ls_fcat-coltext = ls_fcat-fieldname.
ls_fcat-edit = 'X'. IF ls_fcat-fieldname = 'COL_POS' OR ls_fcat-fieldname = 'FIELDNAME'.
ls_fcat-key = 'X'.
ENDIF. MODIFY it_fcat FROM ls_fcat.
ENDLOOP.
ENDFORM. " CHANGE_FIELDCAT
ref:saptechnical tutorial.
Regards,
Anirban -
How to edit the records in error stock.
Hi Experts,
i have error records in error stack and the remaining records are loaded successfuly . here my doubt is how to edit the records in error stack because its not giving the edit option .
i want to get the edit option means i need to delete the request in target r wt ?
and there are two more targets is there below this process .
Advance Thanks.
Regards
SAPHI
If you have less number records in this request(which you extracted now), delete that request from all the targets and reload again with option Valid records update, reporting not possible.
this is the option which is recommended.
follow the below 2 docs as well.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80dd67b9-caa0-2e10-bc95-c644cd119f46?QuickLink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/007f1167-3e64-2e10-a798-e1ea456ef21b?QuickLink=index&overridelayout=true
Regards,
Venkatesh
Edited by: Venkateswarlu Nandimandalam on Jan 24, 2012 4:35 PM -
Hi gurus in BDC how to print the header on the top of the data
hi gurus in BDC how to print the header on the top of the data
hi,
while downloading the file using gui_download function module
in that function module in TABLES filednames parameter is used to get headings
example:
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
FILENAME = FILENAME1
FILETYPE = 'ASC'
WRITE_FIELD_SEPARATOR = 'X'
TABLES
DATA_TAB = T_ZETBR
FIELDNAMES = IT_HEADER
reward if useful,
thanks and regards -
How to display the fields in ALV Output without using Field catalog?
How to display the fields in ALV Output without using Field catalog?
Could you pls tell me the coding?
Akshitha.Hi,
u mean without building field catalog. is it? I that case, we can use the FM REUSE_ALV_FIELDCATALOG_MERGE.
data: itab type table of mara.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = sy-repid
i_structure_name = itab
CHANGING
ct_fieldcat = lt_fieldcat[]
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
*Pass that field catalog into the fillowing FM
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = gd_repid
i_grid_title = 'REPORTING'
is_layout = gt_layout
it_fieldcat = lt_fieldcat[]
tables
t_outtab = itab. -
How to edit the node value of a tree in webdynpro java
Hi ALL
I have Tree UI element where i got displayed all the nodes by calling the BAPI
Now my requirement is when i put the cursor at any node in the Tree struture then on click of insert button i need to insert the new node with the text , the user has to be option to give new text for the new node dynamically , so while adding the new node in a tree the tree has to choose the text for new node , like how to edit the node of a tree to add new text.
If any one can send the sample code on the same then it would be great help to me.
Similar requirement like in table UI Like however we are adding the new row in a table when we click on the insert button then cursor will go to that new row in a table where user can enter his details in the table.. now i am looking for the same requirement in a Tree UI element.
is it possible the same requirement in tree UI element in webdynpro for Java??
Thanks
kallki reddyHi kallki reddy
In general I think this is not possible in the form you'd like. It seems the Tree control is read-only thing always. It cannot provide editing capabilities.
Table is different thing. You can select within many different cell editors including Input Fields.
I guess that you scenario could be implemented not with Tree control, but with Table with Master Column. The master column allows to bring up a hierarchy into a plain table. So it's just a tree inside a table.
Here you can find further details: [TreeByNestingTableColumn API|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/92/12a74046033913e10000000a155106/content.htm]
BR, Siarhei -
How to edit the existing data in the XML file from java programming.
Hi all
i am able to create XML file with the sample data as below from java programming.
i need sample code on how to edit the existing data in the XML file?
for example
<?xml version="1.0"?>
<mydata>
<data1>
<key1>467</key1>
<name1>Paul</name1>
<id1>123</id1>
</data1>
<data2>
<key2>467</key2>
<name2>Paul</name2>
<id2>123</id2>
</data2>
</mydata>
i am able to insert the data in the XML.
now i need sample code on how to modify the data in the above XML file from the java programming for only key2,name2,id2 tags only. the remaining tags data in the XML file i want to keep same data except for key2,name2,id2 which are i want to modify from java code
Regards
Sunil
[points will be always rewardable]hi
u need a parser or validate the xml file for to read the xml file from java coding u need for this
xml4j.jar u can download this file from here
http://www.alphaworks.ibm.com/tech/xml4j
or we can use the SAX(simple API for XML)
some sample applications for this
http://www.java-tips.org/java-se-tips/javax.xml.parsers/how-to-read-xml-file-in-java.html
http://www.developertutorials.com/tutorials/java/read-xml-file-in-java-050611/page1.html
http://www.xml-training-guide.com/e-xml44.html
let me know u need any other info
bvr -
How to edit the find-and-replace dialog in Dreamweaver 8
For over 13 years I have been a happy user of Macromedia Dreamweaver 8. And I still see no reason to use any other program for editting PHP.
However, 1 thing has been bugging me for years. In the find-and-replace dialog there is a select "Find in". The options are in a dropdown.
I want this select to be a multiselector (not in functionality, but just so I don't need to click to get the dropdown, but just one click to select).
I read in the help at 'Customizing the appearance of dialog boxes' at point 4
On your disk, find the appropriate HTM file in the Configuration/Objects, Configuration/ Commands, or Configuration/Behaviors folder.
I've been searching but can not find the code for that dialog, althou it should be easy. Also did a search for that 'save' image, because once I find that, I can find this form, but its not in the macromedia folder.
how to edit the find-and-replace dialog in Dreamweaver 8?It's looks less like an image and more like a form drop list to me.
Yes its a dropdown list. But to find the code for that select I tried to find the htm file that code is on by searching for the save-image which is also on that page (next to the yellow folder). I did a search on all folders in c:/programfiles/macromedia and that image is not in there. If I could find the image name, I could search the code for that and should find that htm (or javascript) which is outputting it, then the select must be near to that.
I also searched the code for the various texts on the page and got many hits, but not from the dialog page. I can't search dll files, so maybe thats where that code is in. -
How to edit the properties.
I installed a tool in LiveCycle called "LiveCycle Workbench". I dont know how to edit the properties of Reader Extensions server and deselect [CommentsOnline] through Workbench. Please kindly advice me in detail with examples or samples.
Thanks,
PrabudassThis is the Help topic for the Apply Usage Rights operation that the Reader Extensions service provides:
http://livedocs.adobe.com/livecycle/es/wb_help/00000949.html
If you are new to LiveCycle, you should work through this tutorial to learn the basics:
http://livedocs.adobe.com/livecycle/es/wb_help/00000405.html
Scott -
How to edit the list box items in labwindow/​CVI?
how to edit the list box items in labwindow/CVI?
Listbox items cannot be edited directly in the control: what you can do is to select a line an, transfer its content to a textbox control, edit text there and move text back to the listbox control. Available interactions with the listbox control are listed in the help.
An alternative to it is to use a tree customized to appear like a listbox: tree item labels can be edited directly in the control, at least those in the base column of the tree. You can look at the example \samples\userint\treelist.cws that shows how a tree can be customized this way. I haven't opened it, but this old example too should show the ability to edit tree cells.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos? -
How to edit the include in the user-exit
hi experts,
how to edit the include in EXIT_SAPMM07R_001 fuction module exit.
when i am trying to edit the incude include zxmbcu08 .
it was giving the message" Program names ZX... are reserved for includes of exit function groups ". at status bar.
what is the way to edit include the fuction module above specified.
what is the issue !
please post ur reply as early as possible.
Thanks in Advance ..,
Regards,
HituHi,
Are you creating the include for the first time??
If you are modifying the include..Probably you have to use the modification assistant..
In the application toolbar...There are button for INSERT, REPLACE, DELETE..
Place the cursor on the code...Then press INSERT button..
It will open a block in that place..
Thanks,
Naren -
How to edit particular field in alv list display
hi,
i am displaying output using alv list display. my as follows.
runrate maheed a01.
here if i click a01 it has to show iin edit mode earlier it has to show display mode only. when i select by that time it has to show edit mode there i will change into a02 and i will click save button this is my requirement.
anybody can send me the sample code please.
thanks,
maheedhar.tfollowing is my field cata log
w_field-fieldname = 'APPLN'.
w_field-tabname = 'IT_SECOBJECTS'.
w_field-seltext_l = text-m01.
w_field-outputlen = '10'.
w_field-col_pos = 1.
append w_field to i_field.
clear w_field.
now i am writng like this
w_field-fieldname = 'APPLN'.
w_field-tabname = 'IT_SECOBJECTS'.
w_field-seltext_l = text-m01.
w_field-EDIT = 'X'. "maheed
w_field-outputlen = '10'.
w_field-col_pos = 1.
append w_field to i_field.
clear w_field.
eventhough it is not allowing me to edit the field when i click that field in the output.
thanks,
maheedhar.t -
How to edit the job name in SM37
Hi All,
I have job in SM37 with the mane ZBI_PROCESSING and the Job in Release status. Now I want to change the Job Name to Z_PROCESSING_SS. Please let me know how to edit the Job Name.
Regards,
RaviHi Ravi,
In SM37 when you have the list of all jobs, right-clic on the job you want to rename, copy, enter the new name.
Then you can delete the first job. The copied one will then be executed.
Regards,
Fred
Maybe you are looking for
-
Hello, Thank you for taking a look at my problem. My Windows computer crashed so I removed the hard drive and installed it into a hard drive enclosure and connected it to my new Windows computer with a USB cord. I installed Mozilla Thunderbird on my
-
Unable to configure webstack - SXDE - failed adding connection to postgreSQ
Noob here. Firstly, feel free to redirect if this is the wrong forum. I just installed the current release of SXDE on VMware server. I am now trying to configure the webstack, as per the Getting Started guide (as per file:///opt/webstack/doc/html/p3.
-
After updating the default task.eddmod.edd document, I have: Created a dtd from the updated edd. Opened Structure Tools > Structure Application Designer. Selected existing application (dita_1.2_task), selected my updated edd, dtd, and task.template,
-
If I forget the password to my iPod 5, how can I be able to unlock it?
I don't know how to unlock my iPod because I forgot the password to it...
-
Hi, on Discoverer Viewer (Release 4.1.44) I created totals, but when there is only one row composing the total, is not showing the total on the report. On Discoverer Desktop is showing all the totals correctly, independently the amount of rows that c