Hi guys. i have some problem with a link from a pdf on-line,when i click on it,the page adds a "%" at the and of the link and says "page not found" because of it

Hi guys. i have some problem with a link from a pdf on-line,when i click on it,the page adds a "%" at the and of the link and says "page not found" because of it.
This happens only when a load my pdf file on my server, because if i click on the link when the file is on my iPad, the page opens without problem.
Any help please?
thanx

the % sign is often used when there's a space in a name. HTML doesn't like spaces so it fills them with % or %20
try, on the end of that link, see if there's a space built into the page or the link when the page was made
On the web address you may be able to 'backspace' at the end and erase that space to get the address, but whomever made the page possibly put a mistake in the link

Similar Messages

  • A problem with copying text from english pdf to a word file

    i have a problem with copying text from english pdf to a word file. the english text of pdf turns to be unknown signs when i copy them to word file .
    i illustrated what i mean in the picture i attached . note that i have adobe acrobat reader 9 . so please help cause i need to copy text to translate it .

    Is this an e-book? Does it allow for copying? It is possible that the pdf file is a scan of a book?

  • I have some problem with my computer because when i turn it up, the screen turns in a blue colour and the sound doesn't work and in this way i can't hear anything

    i have some problem with my computer because when i turn it up, the screen turns in a blue colour and the sound doesn't work and in this way i can't hear anything

    Will u help me or not?

  • HT3702 Dear Customer Support... I have some problem with In-App Purchases and i can not Report a Problem  in Itune

    Dear Customer
    I has one Iphone and I have some problem with In-App Purcases Because my sister purchased In-app when she play
    and i can not report a problem in Itune,
    I inadvertently purchased all of this application in Order Number: MH*****4H5  Date: 04/09/12 ,Order Total $36.81
    So i can't use App store on my phone Because have problem Billing info and i dont want this order, I inadvertently purcased all of this application
    Hopefully I can ge help from you as well.
    Best Regards
    <Edited By Host>

    These are user-to-user forums, you are not talking to Apple here. All purchases are considered final, but you can try contacting iTunes support and see if they will refund or credit you : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Hi, guys. I have some problems with my ipad. It has been switched off and it does nor respond on any actions

    hi, guys. I have some problems with my ipad. It has been switched off and it does not respond on any my actions

    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • I have a problem with my apple tv, I can watch my music of my mac in the TV but I cant transmit  music or video from my mac to my apple tv because not appear the logo Apple Tv in my itunes.  Somebody help me?

    I have a problem with my apple tv, I can watch my music of my mac in the TV but I cant
    transmit  music or video from my mac to my apple tv because not appear the logo
    Apple Tv in my itunes.  Somebody help me?

    Welcome to the Apple Community.
    The Apple TV 2 doesn't show up under devices like the Apple TV 1, to send video and music to the Apple TV you need to use the Airplay Option which appears in the lower right corner of iTunes.

  • I have a problem with iPhone is that I can replace it at points of sale in the U.S. because I bought from Saudi Arabia because the problem I think in the hard ware software worked more than 3 times did not fix

    dears,
    I have a problem with iPhone is that I can replace it at points of sale in the U.S. because I bought from Saudi Arabia because the problem I think in the hard ware I do resoftware more than 3 times did not fix.
    Network also always missing.
    I am living in KS Wichita. I hope you help me pleas.
    Regards.

    iPhone warranty is not international. You will have to return your
    iPhone to Saudi Arabia for repair/replacement. Either take it back
    yourself or send to friend/relative for them to take to Apple. Apple
    will not accept international shipments for repair nor will Apple
    ship repaired/replaced iPhones out of the country where the repair
    was done.

  • Please i nedd help my account do not let me put any credit card and said that I have some problem with a past charge bur wonr let me pay any way, so i cant down load anything please what can i do

    Please i nedd help my account do not let me put any credit card and said that I have some problem with a past charge bur wonr let me pay any way, so i cant down load anything please what can i do

    go to this page and cotact iTunes store and they can help you out with this
    https://expresslane.apple.com/Issues.action

  • I have some problem with In-App Purchases

    Dear Customer Support,
    I have some problem with In-App Purchases
    Because my 4 year-old daughters purchased  In-App when he play
    and i can not Report a Problem  in Itune
    I inadvertently purchased all of this application below.
    Order Number:
    Receipt Date: 16/04/12
    Order Total: $99.99
    Billed To: MasterCard
    Diamond Dash,140000 wooga
    Report a Problem In App Purchase   $99.99
    Payment Card Total $99.99
    Hope I can get help from you as well.
    Best regards
    <Email Edited by Host>

    Hi, ddddda
    I've got the same problem, same rate.
    I called to Apple Support and she recommended me to report by this link.
    http://www.apple.com/asia/support/itunes/contact.html
    (Select topic .. App store)
    Within 6 hrs, Apple replied me with this.
    >>>>>>>>
    Dear Charin,
    Josh here from the iTunes Store.
    I understand your son made a purchase accidentally that you would like refunded. When it comes to your money, I can certainly appreciate how important it is to feel that you are treated fairly, and I would be more than happy to help you out with this today.
    Please read my entire email as I have included information about your refund, what was purchased and how to avoid these type of purchases in the future.
    Charin, the charges in question are for in-app purchases. An in-app purchase is a purchase that can be made within an Application on an iPhone or an iPod Touch.
    In-App purchases are items you can buy that will assist you in advancing in the game you're playing. Some examples of In App Purchases are: bonus game levels or maps, additional experience points, subscriptions, and recurring services.
    The Application "Diamond Dash" was free, and this is the Application that was used to purchase the in-app items. The in-app purchases were for "1000 Gold" to be used when playing "Diamond Dash."
    Please note that there is a 15 minute window after initially entering in your password, where the password is not requested again. Once this time has passed, you will be requested for your password, and also to confirm the purchase by tapping the Buy button.
    To prevent any further in-app purchases from being made unintentionally, please set the in-app restriction on your device(s) as soon as possible. You can set the in-app restriction on an iPod Touch, iPhone or iPad by following these steps;
    1) Click on the "Settings" Application
    2) Now from the list of options click on "General"
    3) Scroll down and click on "Restrictions"
    4) Under the heading "Allowed Content" be sure that "In-App Purchases" is "OFF."
    After reviewing the circumstances of your case, we determined that issuing you a refund for your unintentional purchase of "1000 Gold" is an appropriate exception to the App Store Terms and Conditions, which state that all sales are final. In five to seven business days, a credit of $99.99 should be posted to the credit card that appears on the receipt for that purchase.
    The iTunes Store provides a warning message that asks if you are sure that you want to buy an item. This warning can be turned off. If you would like to make sure that this warning is on, you can reset the warnings in the iTunes Store by following the instructions in this article:
    Resetting iTunes Store warnings
    http://support.apple.com/kb/HT1734
    Additionally, you can make modifications on certain devices that will prevent them from making purchases:
    iPhone, iPad, and iPod touch: Understanding Restrictions
    http://support.apple.com/kb/HT4213
    Please let me know if you require any further assistance with this issue, as if you do, I would be glad to help. Thank you very much for being part of the iTunes Store family, Charin. I hope you have a great day.
    Sincerely,
    Josh
    iTunes Store / Mac App Store Customer Support
    Please Note: I work Sunday 7 AM - 3:15 PM, Monday 4:00 PM - 11:30 PM, Tuesday 3:30 PM - 11:30 PM, and Friday 7:00 AM - 3:15 PM
    All times are EST.
    Thank you for allowing me the opportunity to assist you.
    >>>>>>>>>>>>>>>>>>>>>>>>>>
    Once i've got any development, I'll posted here.
    remark : This app "in-app purchase" no need for password confimation in buying dialogue.

  • Hey Guys i have a problem with my mac since last month and it wont boot up it freezes in a grey apple logo and and spinning gear any body know how to fix this?

    Hey Guys i have a problem with my mac since last month and it wont boot up it freezes in a grey apple logo and and spinning gear any body know how to fix this?

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
    a. Boot into Recovery by holding down the key combination command-R at the startup chime, or from a local Time Machine backup volume (option key at startup.) Release the keys when you see a gray screen with a spinning dial. When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
    How to back up and restore your files
    b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    How to use and troubleshoot FireWire target disk mode
    c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Before reconnecting an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
    Step 3
    Boot in safe mode.* The instructions provided by Apple are as follows:
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    *Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Post for further instructions.
    When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
    If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
    If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 4
    Sometimes a boot failure can be resolved by resetting the NVRAM.
    Step 5
    Launch Disk Utility in Recovery mode (see above for instructions.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it produces. Look for the line "Permissions repaired successfully" at the end of the output. Then reboot as usual.
    Step 6
    Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
    Step 7
    Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
    Step 8
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

  • I have a problem with my Iphone 4s since I did my first update at your Itunes, the bluetooth and the WiFi it is not workinhg anymore.  It is sad that companies like apple are not able to support thier sofware and business.  I went to a apple store at Sout

    I have a problem with my Iphone 4s since I did my first update at your Itunes, the bluetooth and the WiFi it is not workinhg anymore.
    It is sad that companies like apple are not able to support thier sofware and business.
    I went to a apple store at South Park, Charlotte NC,
    and found out the worst customer service (in my case)
    They don't have answers and don't understand about  "dont let any customer go away sad or mad"
    I explain to them that I did everything they said to fix the problem, even to dounload the iOS 6.1.3
    that was supposed to fix the problem.
    they said fix the problem in other phones but not in mine.
    So here I am with no wifi and bluetooth, with apple technicians and experts that don't know what to do with the problem that the sofware they developed cause in my iphone 4s.
    and the solution is for me to pay $199.00 US dollars for a problem that I did not cause.
    wich means to buy something else from apple to fix a problem that it is not my fault.
    Great! what a convenient solution.
    I would like to have an answer from you guys and see if someone there have a better answer for me that shows support, values and integrity as a grest company with solutions for your customers.
    Dont think that I want a new phone, I want mine fixed if is possible.
    Thank you very much and God Bless you!

    Apple isnt here. this is a user based forum for technical questions. The solution is to restart, reset, and restore as new which is in the manual after that get it replaced for hard ware failure. if your within your one year warranty its replaced if it is out of the warranty then it is 199$

  • Hi guys, I have a problem with imessage. My iphone 4S is factory unlocked and i have been using t-mobile carrier. i tried settings - messages - imessage on but there is this 'waiting for activation' thing. Does anyone know how to solve this? Thanks!

    Hi guys, I have a problem with imessage. My iphone 4S is factory unlocked and i have been using t-mobile carrier. i tried settings - messages - imessage on but there is this 'waiting for activation' thing. Does anyone know how to solve this?
    Thanks!

    If you are in the UK:
    Please upgrade your plan to Web n Walk plus. One of our users on T-Mobile UK had this to report back to us:
    T-Mobile UK are in fact port blocking to ensure fair usage on their base Web and Walk Plan. I have upgraded to Web and Walk Plus and as a result the port blocks are lifted and I get a higher data allowance!
    We were also recently contacted by T-Mobile UK, who stated the following:
    Any smart phone (iphone, android etc) that is bought directly from T-Mobile should be automatically provisioned with Web n Walk plus, if customers have bought a handset sim free then they will need to call customer services and get this added. It is free of charge for most price plans (including new plans) but some older plans will generate a charge of £5pm for this.

  • Hi Guys, I have a problem with Rosemount Radar Level Trasnmitter Model 5400 series with Foundation Fieldbus

    Hi Guys, I have a problem with Rosemount Radar Level Trasnmitter Model 5400 series with Foundation Fieldbus, the indication of radar in NI-FBUS software configurator was good no Error, but when I try to connect the segment to the Centum VP DCS, the radar lost in the list, but another device in the segment still in the list, only the radar lost from the list.please your advice what make the radar lost in the list?, Thank you
    Attachments:
    Radar Level Tranmitter 5400FF.pdf ‏516 KB

    Hi Nanda,
    Would you check if the addresses of the device conflicts with one of the new devices in the cascaded segments?
    If this is not the issue, can you try to see what happens if you only use this one device with the same procedure you have done? Just wanna try to narrow down where the problem is. A capture by FBUS Monitor is even better.
    Thanks.

  • I have some problems with work in Flash cs6

    I have some problem with my game when I created it using adobe flash cs6
    When the duck hits the screen, like from right to left it shows
    TypeError: Error #1009: Cannot access a property or method of a null object reference.
      at Duck/ducksmove()
      at flash.utils::Timer/_timerDispatch()
      at flash.utils::Timer/tick()
    This is the code so please help check which is wrong
    package  {
      import flash.display.MovieClip;
      import flash.utils.Timer;
      import flash.events.TimerEvent;
      import flash.events.MouseEvent;
      public class Duck extends MovieClip {
      var moveDuck:Timer = new Timer(10);
      var speedX:Number;
      public function Duck() {
      this.addEventListener(MouseEvent.CLICK,KillDuck);
      moveDuck.addEventListener(TimerEvent.TIMER,ducksmove);
      moveDuck.start();
      speedX = 10;
            function ducksmove(evt:TimerEvent):void
      this.x -= speedX;
      if (this.x <=0)
      moveDuck.stop();
      moveDuck.removeEventListener(TimerEvent.TIMER,ducksmove);
      this.parent.removeChild(this);
      function KillDuck(evt:MouseEvent):void
      var p:MovieClip = this.parent as MovieClip;
      p.setScore();
      p.updatecount();
      this.removeEventListener(MouseEvent.CLICK,KillDuck);
      this.parent.removeChild(this);
      moveDuck.addEventListener(TimerEvent.TIMER,ducksmove);

    You appear to be trying to remove the same object twice, first in the KillDuck function and then in the ducksmove function.  If it is removed already you can't try to remove it again because it is no longer in the display list.

  • Hi! Everyone, I have some problems with JOIN and Sub-query; Could you help me, Please?

    Dear Sir/Madam
    I'm a student who is interested in Oracle Database and
    I have some problems with JOIN and Sub-query.
    I hope so many of you could help me.
    if i use JOIN without sub-query, may it be faster or not?
    SELECT field1, field2 FROM tableA INNER JOIN tableB
    if i use JOIN with sub-query, may it be faster or not?
    SELECT field1,field2,field3 FROM tableA INNER JOIN (SELECT field1,field2 FROM tableB)
    Thanks in advance!

    Hi,
    fac30d8e-74d3-42aa-b643-e30a3780e00f wrote:
    Dear Sir/Madam
    I'm a student who is interested in Oracle Database and
    I have some problems with JOIN and Sub-query.
    I hope so many of you could help me.
    if i use JOIN without sub-query, may it be faster or not?
    SELECT field1, field2 FROM tableA INNER JOIN tableB
    if i use JOIN with sub-query, may it be faster or not?
    SELECT field1,field2,field3 FROM tableA INNER JOIN (SELECT field1,field2 FROM tableB)
    Thanks in advance!
    As the others have said, the execution plan will give you a better idea about which is faster.
    If you're trying to see how using (or not using) a sub-query affects performance, make the rest of the queries as similar as possible.  For example, include field3 in both queries, or ignore field3 in both queries.
    In this particular case, I guess the optimizer would do the same thing either way, but that's just a guess.  I can't see your execution plans.
    In general, simpler code is faster, and better in other ways, too.  In this case
    tableB
    is simpler than
    (SELECT field1, field2  FROM tableB)
    Why do you want a sub-query in this example?

Maybe you are looking for


HashFlare