Hi I am using an iphone 4 and its was working fine. Presently its giving browsing error. Whenever I am trying to browse internet by using safari or any other browser it retruns with "server not responding" Can somebody give me a solution for this ?
Hi I am using an iphone 4 and its was working fine. Presently its giving browsing error. Whenever I am trying to browse internet by using safari or any other browser it retruns with an error message "server not responding" Even the same thing is happening with youtube also. The worst part is am able to check my mails, able to chat and so on... only thing not able to browse through the browser. I have tried restore option also. This is happening with both Wlan and Data con. too
Please help...
I do not really know much about this kind of problem, but i may be your internet connection.
If you are on your own #G network then:
Go to Settings > then enable "Airplane Mode". Count to 10 and then disable it.
Then wait patiently until you get a good connection and then try again.
If you are on a nearby Wi-Fi connection then:
Go to Settings > Wi-Fi > then disable then enable after counting to 10. Make sure that you are connected and then try again.
If all else fails, then you need to contact your provider for assistance.
Sprint:888-211-4727
AT&T:?
Verizon:?
Similar Messages
-
when i connect my iphone 4,an error message saying usb device is malfunctioning is appearing...can anyone give me a solution for this?i tried using on a different pc.but still get the same result..
First thing i would try is to use another cable if available.
-
Any one can plz give me the Solution for this problem
select country ----text field
select states ---------text field
select country is one text field and select states is another text field .
By using ajax if i select country like india states belonging to the india should be displayed in select states text field -----
like if i select any country , belonging states should be displayed in selected states text field.
can any one plz suggest me for this problem by using ajax with step by step solution.
thanks in advance.....nareshannam wrote:
can any one plz suggest me for this problem by using ajax with step by step solution.
thanks in advance.....Well my Idea is to look for another Forum ,This is not a Ajax Forum
maybe try [http://www.dynamicdrive.com/] or [http://www.webdeveloper.com/] -
To solve this i have tried many things said in the forum like changing network.http.keep-alive.timeout to 0, removing and reinstalling firefox but nothing seems to work out. Though chrome is working fine. few days back post installation of firefox 25, i scanned my computer with spyhunter and regcure pro and i dont know why, it seems to have worsen the case. Please help
It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
The DELETE statement conflicted with the REFERENCE constraint "FK_Equipment_Assets". The conflict occurred in database "WorkOrderSystem", table "dbo.Equipment", column 'AssetCode'
ya that's true row is referenced by another table.....but i want the row to referred by another table ,I don't know how to fix it
Actually this is not a C# issue. It is a T-SQl issue.
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=transactsql
The above link should be posted.
Per my understanding, first you should
delete the record from the Foreign Table and then after you have to delete the record from the Primary Key table
Hope it helps you.
Best regards,
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
my ipod classic is visible in windows but not in itunes, this happens on 2 different computers where my iphone and ipod touch work fine which leads me to think something is up with the ipod itself and i cant find any threads to help.
any thoughts anyone??Perhaps the reason you haven't had any replies is because there is no such thing as an 8GB iPod Classic.
I suggest that you begin by correctly identifying which iPod you have.
http://support.apple.com/kb/HT1353 -
when I add a new contact number to my iphone 5c and I try to select the iphone choice is not showing up; and it was working fine the day before. ?Also when I try to send an imessage is not going trough as an imessage, it makes me send it as a message.
You're using Exchange Active Sync to synchronize contacts and calendars with your company Exchange Server. If the default calendar/address books are set to the Exchange account, it will sync automatically. This is normal.
Go to Settings>Mail, Contacts, Calendars to change the default address book and calendars to a something else, iCloud or something synced from your home computer instead. -
Can somebody give me the formula for the balance column in a check register please? I am setting the register up like the sample in iWork 09 but I seem to be missing something in the formula.
OM,
The way the checking account balance column works is to designate one cell for the starting balance, indicate income with positive figures and outgo with negative figures, summing the transactions and adding the sum to the starting figure.
The formula used, =$F$1+SUM(OFFSET(F3,3-ROW(),-1,ROW()-2)), is not too difficult to understand if you study the syntax for Offset. The author of this template didn't do us any favors because the expression could have been written more clearly, in my opinion. I'll explain how it's done in the template, and then how I would have written it. With the two approaches you may be able to see what it's all about.
$F$1 is the starting balance.
SUM requires a Range specification.
Offset provides the range specification. The syntax for Offset is as follows:
Base Cell. In this case it is F3, the cell the expression is written in.
Row Offset. In this case the author takes the current row number and subtracts the starting row from it. For the first balance the offset will be zero since the first balance is in row 3. For all the subsequent balances, the offset will be negative, meaning that the offset will point to a row above the current row.
Column Offset. In this case the column offset is 0. That means that it is pointing 1 column to the left, Column E.
Rows. This parameter sets the length of the range, in rows. Subtracting 2 from the current row number means that the range will be 1 for the first balance and will grow by 1 for each entry down the list.
Taking all this into account, the range for the Sum function will always be Column E from Row 2 to the current Row.
How I would have written the balance expression:
=F$1+SUM(OFFSET(E$3,0,0,ROW()-2))
I believe it's easier to follow.
The starting balance is still in F1, but only the row needs to be absolute - a fine point, I know.
In my expression the base cell for the Offset function is the first entry cell of the transactions, E3. The row needs to be absolute, there is no reason for the base cell to move about as it does in the author's version.
In my approach, both the row and column offsets are zero. We always start at E3.
In my approach, the number of rows in the range is the current row number minus 2, just as in the author's expression. That means we include all rows from Row 3 to the current row.
I'd be happy to answer any other questions about the specifics, but you need to be specific about what you don't get.
Jerry -
Hi Apple! My iphone 4g has restored and I can't retrieve the account. I have tried the password renewal that will be send on my mail but unfortunately my mail has been deactivated also.what is your solution for this kind of cases? This is so unfair.
http://support.apple.com/kb/HT5312
If you established a rescue email address, there will be a link on the "Passwords & Security" page of id.apple.com. Clicking the link will send the reset to your rescue email address (NOTE: This is not the same address as your Apple ID email)
If there is no link on the page, then you didn't establish a rescue email address. Contact AppleCare at 800.694.7466, and ask for account security. You will need to answer some questions to verify your identity, AND you will need access to a computer to generate a temporary support pin.
HTH -
I have apple iPhone 4S upgraded to iOS 6.0.1 and everything was working fine suddenly my Wifi was not connecting and found the wifi on/off button is greyed out and to enable it I tried all resets but still my problem have not solved, still wifi is off
Same here.... No fix. Replacing is the option apparently and if you're out of warranty, you're SOL. That was as per the "Genius" at Apple.
-
I have Iphone 4 it was work fine in my country (bahrain) i went to UK and i change sim card to O2 and when i came back it doesn't work in my country i think because i update the carrier in Uk its my carrier now 10.0 and the others in my country is 9.0
We had the same problem, but figure out the solution.
You MUST have at least 1 song added to your ITUNE! After you add a free song, then everything else should work as normal!
Hope this helps! -
I was using iMovie yesterday and it was working perfectly. But today when it started it doesn't show anything in the window on the left. No events, no projects, nothing. It's blank and so is the rest of the screen. Does anyone know what my problem might be?
Where does the imovie.library reside? where do the events and projects reside?Hi winkydb,
Thanks for visiting Apple Support Communities.
If you do not see the events or clips you were working with previously, first see if you can switch back to the library you were using with this method:
Show or hide the Libraries list
You select libraries and events in the Libraries list.
To show the Libraries list: Click the Show button on the left side of the toolbar.
The default location for iMovie libraries is the Movies folder in your home folder.
You can find this information here:
iMovie (2013): Work with multiple libraries
http://support.apple.com/kb/PH14745
Best Regards,
Jeremy -
Can anyone solve (or) give me a solution for this problem.....?
Hi Everyone!
Can anyone solve (or) give me a solution for this problem.....?
We have used two folders Source & Finalwork. We have get image from Source folder and put silo path & Moved to Finalwork folder.
Is this possible to check whether both folder images Embedded color profile same or not.
-yajivCould you elaborate what you mean by this
We have get image from Source folder and put silo path & Moved to Finalwork folder.
Possibly again with a screenshot to illustrate the task?
// 2012, use it at your own risk;
#target photoshop
var theFolder = Folder.selectDialog ("select source folder");
if (theFolder) {
var theFiles = theFolder.getFiles(/\.(jpg|tif|eps|psd)$/i)
var theOtherFolder = Folder.selectDialog ("select target folder");
if (theOtherFolder) {
var theOtherFiles = theOtherFolder.getFiles(/\.(jpg|tif|eps|psd)$/i)
var missingFiles = new Array;
var unmatchedProfiles = new Array;
// work through files;
for (var m = 0; m < theFiles.length; m++) {
var check = false;
var theFile = theFiles[m];
// find name of the same name;
for (var n = 0; n < theOtherFiles.length; n++) {
var theOtherFile = theOtherFiles[n];
// if one is found;
if (theFile.name == theOtherFile.name) {
check = true;
var oneFile = app.open(File(theFile));
var otherFile = app.open(File(theOtherFile));
// check profiles;
if (oneFile.colorProfileName == otherFile.colorProfileName) {
// collect umages with unmatched profiles;
else {unmatchedProfiles.push(theFile)};
// collect missing files;
if (check == false) {alert ("hahaha");missingFiles.push(theFile)}
// alert of problems;
if (unmatchedProfiles.length > 0) {
alert ("the corresponding files for these do have a different color space:\n"+unmatchedProfiles.join("\n\n"));
if (missingFiles.length > 0) {
alert ("these files miss corresponding ones:\n"+missingFiles.join("\n\n"));
////// get psds, tifs and jpgs from files //////
function getFiles (theFile) {
if (theFile.name.match(/\.(jpg|tif|psd|pdf|)$/i)) {
return true -
Help! We set up family share a few weeks ago, and it was working fine with the organizer and two additional members. The three of us could see each other on app and iTunes stores and could view each other's purchased items. Then ... All of that disappeared. We cant see each other's profiles any more and we definitely can't view any purchased items. In addition, when we try to go in and jump start by downloading a free app or logging out and back of itunes, nothing works. It seems to show we have family sharing in the iCloud settings, and when we click the Apple ID it asks us to confirm, and we confirm, and are asked if we want to change accounts because then we trigger the 90 day freeze period. And we aren't changing any accounts - just trying to confirm the same accounts to get family share to work! We are all on the same ios 8.1.3 and os, so I don't know what else to try!
No, I am a media professional who uses his MacBook Pro to connect to external monitors, and needs to continue to do so. I don't want Apple TV. I want my laptop to work again, like it's supposed to. Like it used to.
I have a demonstration this week at work that requires me to plug into an LCD screen and I am hoping to have this resolved by then. I am trying to convince my department to buy a Retina Mac and thousands of dollars worth of video software for live shows, and if I can't make it work, then I can't exactly convince them (or myself) to buy what I have been researching.
Again, I don't want wireless video or Apple TV. I don't want to buy any more stuff. I want to know why my Thunderbolt to HDMI cable stopped working after my update, and how to fix it...preferably before this meeting. -
my ipod 4g was working fine until i locked the screen but when i tried to turn it back on the screen stays black and its been 3 days. Does anyone know how i could fix this?
- Charge the iPod for half an hour. Then reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- if still not working, connect to your computer. If iTunes sees the iPod, restore the iPod.
- If still problem, place the iPod in recovery mode and then try to restore the iPod. For recovery mod see:
iPhone and iPod touch: Unable to update or restore
Maybe you are looking for
-
Hello, This is what I have and with what I have to work it. - iPhone 4 v5.0.1 - iTunes v10.5.1.42 - HP Pavilion Slimline with Windows Vista Home Premium Every single time I plug in my iPhone 4 into the computer and I open the iTunes 10, both items st
-
Horizontal DIV Scroll: Safari vs iPhone
I need some help ASAP! I coded a very basic website with a horizontal scroll. It works beautifully on Safari, Chrome, Firefox, etc. But for some reason, I can't scroll past about 1400px on any give page in the site with my iPhone, at which point, the
-
How to access the attributes in an object using TestStand.?
hi, I have a class named Status in C# that has 2 data members. There is another Class named Parameter and it has functions that return objects of type Status. I made the DLL of the class Parameter. Then i added that class to NI TestStand and called a
-
Time stamp and skip test report
Hello, all I am new to teststand and just beginning to do some work with teststand. My interest is to report every step with data begin with a time stamp. I create subtest in the Numeric type property to report timestamp in the form of YYYY-MM-DD-HH
-
Incoming Payments Transferring to Controlling
CO Experts, We recently stopped using table 3KEH to transfer receivables automatically into CO. We are now using F.5D and 1KEK. We still have some old invoices under the old config that we are clearing as we get payments. However, after running KE5T