Hi- I applied the iTunes up to my Windows 7 86bit PC last Wednesday and iTunes will not load due to a Runtime error r6034Access to C Runtime Library Incorrectly. Then I get an windows error code 1114. I have tried rollling back and reinstalling but no joy
Hi- I applied the iTunes up to my Windows 7 86bit PC last Wednesday and iTunes will not load due to a Runtime error r6034Access to C Runtime Library Incorrectly. Then I get an windows error code 1114. I have tried rollling back and reinstalling but no joy
Hi Keen itunes User,
Thanks for using Apple Support Communities. This article has steps you can take for the error you're seeing:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Ari
Similar Messages
-
When I try to install Itunes, I get this error: (translated from Norwegian) There was a network error while trying to read from the file: C: \ windows \ installer \ iTunes.msi I have tried many times to reinstall, but nothing helps, please help me.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
When I startup Firefox, I always get "Welcome to Firefos" tab. I have tried to change mu options, but when I close Firefox, the options revert back to the origional options before I changed them.
Looks that your current profile isn't working properly.
Create a new profile as a test to check if your current profile is causing the problems.
See Basic Troubleshooting: Make a new profile:
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
I have iphoto 9.2.1 and it will not load. After I click on the app it opens but the screen continousley tries to load. Please Help
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
When I load my home page, the items MOVIES THEATER and my STOCK QUOTES will not load. If I try to make ANY changes to my home page it changes from my.msn.com changes to my.msn.com/x and nothing will happen.
If I loan MSN and copy the address bar and paste it to the Firefox browser, it will load properly the first time BUT will not load properly again.Kandisipad1 wrote:
Well let's see diesel dude I have an iPhone and I have to approve any apps thru iTunes to be loaded on my phone.
No, you simply do not.
Kandisipad1 wrote:
Also all of my info is backed up to iTunes and when I do upgrades on my desktop it's thru iTunes and all of my app purchase are stored and downloaded from iTunes
Okay, your point?
What does that have to do with the initial issue?
Do you actually know what the issue is, or are you simply rambling? -
I have poor/no service on my iphone 6 in places that I do have service on my old iphone 5. Takes 10 minutes to send text and webpages will not load but load within seconds on the iphone 5 and forget making a phone call. How do i resolve this issue??
Hey kristiac,
Thanks for the question. If I understand correctly, you have no service on the iPhone. I would recommend that you read this article, it may be able to help the issue.
If you can't connect to a cellular network or cellular data - Apple Support
Thanks for using Apple Support Communities.
Have a good one,
Mario -
I have just bought a new Imac and it will not load my copy of FCE 3.5 as it says "PowerPC applications are no longer supported". So how do I get to use the version of FCE I am used to and have paid for ?
I do not have any experience with Final Cut, but if you have existing projects that you MUST access; then you are in need of a solution on your new iMac in Mountain Lion!
Unfortunately you got caught up in the minor miracle of Rosetta. Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion). While educational efforts have been made over the last 6 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion.
Workarounds:
1. Purchase a used Mac that will run Snow Leopard (with the optional Rosetta installed) and continue to run FCE on that Mac (you can actually use Screen Sharing with a "headless" used Snow Leopard Mac Mini and use the 27" screen from your iMac to view and work FCE in the Mac Mini environment);
2. Upgrade to an Intel compatible version of FCE and hope it converts your existing projects to its newer format correctly. There is much debate that the newer version of Final Cut are eliminating many needed features; for example Final Cut Pro X vs. Final Cut Pro 6 -- many users are staying with version 6;
3. Install Snow Leopard (with Rosetta) into Parallels and then install FCE in the Snow Leopard environment:
[click on image to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439
NOTE: STEP ONE of the instructions must currently be completed on a Snow Leopard or Lion Mac and the resulting modified Snow Leopard.cdr install file can then be moved over to your Mountain Lion Mac for completion of the remaining steps.
NOTE 2: Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization. -
I updated my iPhone 5S to iOS 7.0.2 and iBooks will not load anything from the Store- I cannot search or even view my purchases.
Also Safari keeps crashing. I have shut down the phone and restarted it twice and that hasn't helped. Any ideas?Libellen wrote:
I updated my Iphone 5s with IOS 7.0.5
The Update would not have Installed if it was not suitable for your Device.
Libellen wrote:
... anyhowe the phone is now totaly "dead" and will not turn on
First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
Safari and mail will not load but i am connected to internet and can download form itunes and other sourses is that HD failure? any suggestions ? verify disk says its OK
iOS 4: Updating your device to iOS 5 or later - Support - Apple
iOS: Unable to update or restore - Support - Apple
iTunes for Windows: iTunes Store connection troubleshooting
See if any of these three may help. -
When I try to start my Garageband 6.05,I get a repetitive message that the core audio midi will not start. If I choose to ignore it, report it or reopen it, it just keeps coming up and garage will not load or start up? Any suggestions? THanks
I'm just guessing at this point, but I suspect that you have installed a midi driver on your computer for some external device, and, since GarageBand's midi capabilities are limited in some ways, chances are your audio/midi driver is asking GarageBand to do something more than it's made to do, causing core audio's midi function to crash.
If that's the case, you might want to try adjusting your midi device's driver settings, or uninstalling your midi device's driver, and then see if GarageBand starts up normally without it. -
I seem to be having a lot of connectivity issues my iPad. It takes a long time to load and sometimes will not load a page at all. I seem to be having issues with streaming in that it will play a song and just stop. It seems I have to turn it completely off and restart.
Anyone had these issues?Settings > General > Reset > Reset network settings
-
# Question
I upgraded to the new version "4" and it will not load any websites..."unable to locate server" is all i get and cannot figure out the problem ....had to delete and go back to an earlier version which i understand is unsafe...what to do?That was probably caused by your Firewall blocking the newly installed version of Firefox.
No known security issues with Firefox 3.6.17, which was just released this past week. -
I have tried to open Firefox, but it just sits there and doesn't load. I have tried to uninstall and reinstall but that works for a few hours and then it goes back to not loading. I don't know what else to do to get it too load.
Right-click on your Windows Taskbar and select Start Task Manager. Look in Task Manager for processes running that are Firefox-related, such as Firefox.exe or plugin-container.exe. If you see either of those, right-click each of them and select "End process". Then try again to start Firefox in [[Safe Mode]]. <br /><br />
*If Firefox will start in Safe Mode, select the option you are presented with to disable your add-ons and plug-ins and restart Firefox normally. You likely have a plug-in, add-on, or a combination of two or more that is causing the problem. Because Firefox allows users to customize endlessly, sometimes there can be conflicts between customized items. From the Firefox menu bar, go to<br /><br />Tools -> Add-ons<br /><br />then re-enable them one by one, restarting Firefox after each and testing after each one to see which one or combination of two or more is causing the problem. <br /><br />
*If Firefox will not start in Safe Mode, make sure you again check Task Manager and end any running instances, then uninstall Firefox and download a fresh copy from mozilla.org/firefox using another browser temporarily. Re-install Firefox (see: [[Installing Firefox on Windows]] for more help ) and try running Firefox again.
Please report back your progress. -
I have an older version of Photoshop...3.5. I bought a new computer and what I have will not load. I love this version. Can I get a new cd that will load into Windows 7? or do I have to buy a complete new program?
No CD, but you can download the installation files if you have the serial number, and the previous install has been deactivated
https://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html
or
Download Adobe CS5.5 Trials: Direct Links (no Assistant / Manager) | ProDesignTools
If you are unable to deactivate the earlier installation, you wil need to phone customer support and ask them to reset your activations. -
ITunes and Quicktime will not load
Hi, when i try and load my iTunes, it will not load. It has been working fine for months, but has recently stopped!
When i try and load iTunes, i am given the standard Windows "iTunes has encountered a problem" screen with the error message of:
Error Signature
AppName: itunes.exe
AppVer: 6.0.0.3
ModName: quicktimeStreamingAuthoring.QTX
ModVer: 7.0.3.50
OffSet: 00016cb9
So i "Repaired" iTunes, which didnt fix the problem, i uninstalled it, which also didnt fix it.
Then i decided to try and uninstall Quicktime, due to it being the root of the problem, and i was greeted with this error:
Error Description
DLL function call crashed
QTInstallCode.QuickTimeUninstallPrc
Any ideas on what is the problem, and how to fix it?! Because i cannot install a new quicktime whilst this one is still on my computer, and i cant get it off!!
Any help would be greatly appreciated!
MattOkay... I'm waiting for this answer too!! Exact problem...was working fine now I get the "Itunes has encountered a problem...." I attempted to run Quicktime (it is needed, I understand) but now it will not run. I uninstalled all (could not even find Quicktime) and attempted to reinstall. Itunes apparently reinstalled but Quicktime will not... and now nothing is running.
Maybe you are looking for
-
How to convert .class file to .dll file
hi, I got a problem, I have to convert my java .class file to .dll file. Microsoft VC++ program will invoke the converted .dll file. Is there any other possibility. I was confused. Cam any body help me. If you are having solution for the can you send
-
A workflow to burn AVCHD camcorder video and 5.1 sound to BluRay disc.
A workflow to burn AVCHD camcorder video and 5.1 sound to BluRay disc. After weeks searching through many posts by the Forum’s experts with Final Cut Pro and Compressor, I have a crude workflow that seems to work for me, and might be of interest to o
-
IPod touch won't sync, backup or upgrade.
I'm reasonably peeved off! Basically a few days before iOS 4 came out my windows computer carked it and wouldn't boot so I had to restore it. I copied my songs and iTunes system files off the drive before restoring the operating system. I got it to a
-
Default value for pricing condition
Hi, I have a requirement for a manual pricing condition for Minimum Order charge - ZMIN - to be automatically populated with a fixed value of £6 when entered manually onto an order. Please advise if this is possible. Thanks in advance. Mike
-
i use windows and i got my hard disk replaced now when i try to sync wirelessly my ipod detects my computed as being a different one how can i make it forget the old one?