Hi, I can't access my iTunes store even though I had updated to the latest version of the iOS. It always shows "the request could not be processed" when I tried to access the iTunes store. Pls help..
Hi, I can't access my iTunes store even though I had updated to the latest version of the iOS. It always shows "the request could not be processed" when I tried to access the iTunes store. This has been going on for the past 3 days already. Pls help..
Many thanks b Noir
This is a copy of ONEof the keys in the registry I changed as told by Apple support today. I also have changed others as instructed by GEAR software support to manually delete GEAR drivers (that I had installed but couldn't delete some of the others they mentioned from Windows system 32. Then some bright spark at work told me I need the Gear drivers so I downloaded the software and installed again.
Sorry, just this minute went to insert image and it is giving me a message saying this sort of content is not allowed?.
The most recent key I altered is in: HKey _local _machine. System\class - 4D36E965-E325-11CEBFC1-08002BE10318. Upper Filter data: Upper filter NTIDrvr SiRem GEARAspiWDN.
The GEARsoftware info about manually deleting GEAR drive is from:
http://www.gearsoftware.com/wiki/index.php?title=DRIVERS:_Windows_-_Updating%2C_ removing%2C_64_bit_versions%2C_etc
I hope you can help
Similar Messages
-
I tried to update the latest version for the iPod touch and it couldn't complete the install. my iPod screen had the apple icon with the progression bar when it couldn't update and it stuck there. iTunes doesn't recognize my device.
How do I restore, if iTunes doesn't see my iPod?Plug your device into iTunes. Hold the home & sleep buttons at the same time. After 10 secs release the 2 buttons. iTunes will tell you it's found a device in DFU mode. The iPod screen will stay black. At this point do a restore. If you see the Apple logo you have held them for too long.
-
I made a purchase on iTunes and it is not showing on any of my devices. When I tried to watch the show in my purchased file I could not. When I go back to iTunes it tells me I made the purchase already. Why can't I access my purchases. Case # 506294747
Hi Paul,
If you are having an issue such as this with an item such as a movie purchased from the iTunes store, you may want to report it to the store. Use the steps in this article -
Report an problem with an item you bought from the iTunes Store, App Store, Mac App Store, or iBooks Store
Thanks for using Apple Support Communities.
Best,
Brett L -
How do I get my iTunes store to work? I have updated my iTunes to the latest version but every time I go to open it, it is just a blank white screen. No writing or anything. Help!?
Oh, and it is on a macbook pro
-
Hi everyone
I'm a new iPad user (ipad2) and have tried to download a few apps. I already have a iTunes/app store account but often when I try download a app I get a message that says "your request could not be processed"?It could be a problem at the other end, try again tomorrow. Also , try resetting your iPad by holding down the home and sleep/wake button till the Apple logo appears and then let it wake up, maybe that may help.
-
I've tried to update the latest version however I've been without a phone for a day as it seems to be stuck on an iTunes logo. I've tried updating via iTunes inc updating latest version but my phone still won't reset. Any ideas? Please help
See Here > http://support.apple.com/kb/HT1808
If using Windows...
Temporarily disable your firewall and antivirus software and try again...
http://support.apple.com/kb/TS1379
See iTunes Connection Issues here...
iTunes for Windows: Troubleshooting security software issues
EMPJ wrote:
Spends 3 hours downloading latest software then says unable to restore
If the issue persists, take the Device to any Apple Store for evaluation. Be sure to make an appointment first. -
Hi, I just got an iPod Nano 1st generation and I plugged it into my computer and open iTunes but it never showed up in iTunes. So then I updated my iTunes to the latest version but it still didn't show up so is there a way you all can help me A.S.AP.
Error 1611
This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service. -
I have just got a iPad yesterday and I'm having a problem
I have just bought a tv series in iTunes and downloaded it on to my iPad but every time I go to watch it it comes up (could not load movie) then takes me back to the episode list ? Can you tell me how to solve this problem pleaseHave a look at the following:
http://itunes.apple.com/sg/app/quickoffice-pro-hd-edit-office/id376212724?mt=8&l s=1
http://itunes.apple.com/sg/app/office2-hd/id364361728?mt=8&ls=1
http://itunes.apple.com/sg/app/documents-to-go-premium-office/id317107309?mt=8&l s=1
http://itunes.apple.com/sg/app/polaris-office/id513188658?mt=8&ls=1 -
My Safari will not allow me to open my Google calendar with Google Apps. I have to open my email with the older version of Google Apps. This happened after I installed 5.1.4. I tried to use the fix of changing to 64 bit by unchecking the 32 bit box but that didnt help.
I assume that there are legal restrictions on the way in which iTunes can get artwork automatically from any source apart from the iTunes Store (which is what the right-click > Get Album Artwork function uses). For example, even though the Gracenote service that iTunes uses to match CDs and retrieve metadata (artist, album, track titles, etc.) also has artwork functions, iTunes does not make use of these.
For manual addition of artwork, there are three cases where the image you select may not be correctly embedded in your media files:
your media are in a format that doesn't accommodate embedded artwork - typically WAV files. To embed artwork you'll need to convert to another format - Apple Lossless or AIFF if you want to preserve lossless quality, AAC or MP3 otherwise.
your media files are read only - to fix this, use Windows Explorer to find the folder that contains your files, right-click and select Properties. On the General tab there's a check box labeled "Read-only" - if this is checked, or is grey (sometimes blue), click the box so that the flag is unchecked and the box is white. Click OK, and then OK again when the "Apply changes to this folder, subfolders and files" option selected. Now try adding the artwork again.
Windows permissions issues are preventing iTunes from updating your media files (there's some anecdotal evidence of a change in this behavior in iTunes 12). See turingtest2's notes on Repair security permissions for iTunes for Windows for advice on fixing this, then try adding the artwork again. -
Post Author: sagimann
CA Forum: Deployment
Hello,
I'm not sure if this is due to bad deployment, but I suspect it is, at least due to bad environment.
My env is:
Solaris 10 64 bit
Oracle 10g client installed under /opt/oracle/app/oracle/product/10.2.0/client_1
BOXIR2 + FP2.6 installed under /opt/reporting, running under user 'bouser'. by the way, 'tnsping' works via that user.
Important bouser env:
ORACLE_HOME=/opt/oracle/app/oracle/product/10.2.0/client_1
TNS_ADMIN=$ORACLE_HOME/network/admin
LD_LIBRARY_PATH=$ORACLE_HOME/lib:$ORACLE_HOME/lib32
I reboot the box, then start BO like so:
cd /opt/reporting/bobje
. setup/env.sh
./mysqlstartup.sh
./startservers
./tomcatstartup
Then, I import a BIAR file with some reports, and whenever I try to open any report via infoview, I get a gray error message INSTEAD of the input param form:
Error:
Your request could not be completed because a failure occurred while the report was being processed. Please contact your system administrator.
This does not occur in our BOXIR2 on Windows, which is why I'm guess it's a deployment/env issue. The main obstacle I have is: how do I diagnose this? there's nothing in the bobje/logging folder, nothing in the /var/adm/message file except for the following line:
May 5 15:23:23 testbox1 boe_pagesd[3865]: [ID 253862 user.error] A failure occurred while the Page Server was processing report 'test report' (id=777) for user Administrator
pls advise,
thank you.The solution is to turn off the printer preference (bottom of Page Setup screen) in the Crystal Report before uploading to the Server. Thanks to: http://pinchii.com/home/2011/12/error-adding-reports-to-crystal-reports-server/
The explanation, from a comment in the above linked blog post:
"To elaborate more on the error, what basically happens is that the Crystal Reports engine tries to get the status of the u201Creport printeru201D aka u201Cdefault printeru201D which was present on the system when the report was created, but the printer does not exist anymore. This causes the Crystal engine to error out. By setting the report to u201CNo Printeru201D, it tells the Crystal Engine not to look for that report printer when opening the report."
Edited by: abirdman on Feb 3, 2012 9:49 PM -
Error - The request could not be performed due to an error from the I/O device
Hello,
I have a Hyper-V server with a few virtual machines.
The host runs Windows Server 2012 R2 with Hyper-V.
VMs are Windows Server 2012R2 Generation 2 and Windows Server 2003 Generation 1.
All VMs running on VHDX on local host disks, no raid, no storage. Most VMs run on dedicated disks.
I am having the following error when I demand large amount of I/O on VMs:. "The request could not be performed due to an error from the I/O device"
This error happens when I run robocopy which requires large amount of writing, or on a SQL 2014 VM which also requires many reads and writes.
Whenever this error occurs, the replicas of the VMs require resynchronization and the MSSQL service stops.
Analyzing the events of the Host, I find the following warning multiple times: "The IO operation at logical block address 0x31fd01 for Disc 4 (PDO name: \ Device \ 0000005d) was retried." Disc 4 is where SQL runs.
Is there any special configuration that must be done to avoid these errors?
Thank you!
RafaelHi Eng.Rafael Grecco,
>>Analyzing the events of the Host, I find the following warning multiple times: "The IO operation at logical block address 0x31fd01 for Disc 4 (PDO name: \ Device \ 0000005d) was retried." Disc 4 is where SQL runs.
>>Chkdsk /r didn't return any error.
It seems that it is not a hyper-v issue .
I would suggest you to keep the driver up-to-date for your hyper-v host .
In addition , here is a similar thread :
http://answers.microsoft.com/en-us/windows/forum/windows_8-hardware/the-io-operation-at-logical-block-address-for-disk/23c32152-c2a6-4c6d-b229-95dc1470231a
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Hello I have the Latest version of Adobe Lightroom 5 to date (8/26/14) however just recently when I open the develop tab I'm missing two options on the right side column "Lens correction" and "Effects" I do not know I've hit some setting to remove those options or if this latest version deleted those options? Any help would be greatly appreciated and please excuse my ignorance :/
Right click next to one of the other headers and you will get a pop-up to enable the missing ones.
-
I recently created a new Appleid and then the password to my old Appleid suddenly did not work. When I tried to reset the password I do not receive the email with the link and Apple does not either recognize my birthday. What to do?
Hi ingaosk,
Thanks for the question. Based on what you stated, it seems like you did not receive the reset email. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
If you didn't receive your Apple ID verification or reset email - Apple Support
Thanks for using Apple Support Communities.
Cheers,
Mario -
I need to restore my iphone 4 with just ios 5, but it only lets me restore it with the latest version which is ios 5.0.1. What can I do??
Restore it using the computer it normally syncs with, this should not require an iOS update.
-
My itunes library had been fine. I had been using an older ipod nano to sync with my itunes library and had been doing manual syncs, with the preferences in itunes set for not allowing "ipods or iphones" to sync automatically. I found out that apple had a program to replace the battery on this older ipod nano, so I sent it in. It was great, they didn't have an exact replacement and sent me a later ipod nano. However, this ipod nano is so new - I will have to get a newer computer with a later operating system to use it.
So, I thought I'd use my old iphone to listen to my old playlists. I thought the preferences were set for not automatically syncing iphone to itunes.
I've had problems in the past with the syncs with this iphone and my computer because of the USB port (1.1). I'm thinking this was the problem.
The apple store did something to update the software on my iphone when it wasn't working one day. I think that when I tried to sync the iphone to the g4 cube via the old port (1.1) it basically wiped out everything on my itunes. Whatever was my selected playlist for my iphone - that was the only music
that remained on my computer and the iphone. I only had about 20 songs purchased on my library, but alot of music that had been downloaded, I gave away those original cds. I did have a back up on my external drive, but that thing died a few weeks ago from some random power outtages we had this fall.
I'm not looking to purchase retrieval software or have some outside third party to retrieve it for me. It's not that much music lost. I just wanted confirmation that this is what happened: that my old iphone sync is what erased the music.The old iTunes library was lost with the old PC. However, it all that music and content is still on your iPod there are many ways you can extract this content from the iPod and import it back into iTunes.
Your iPod is designed to sync with only one iTunes library at a time. It will recognize the iTunes library on the new PC as a new library. If you sync the iPod with this new library, all content will be erased from the iPod and replaced with what is in the new library. So what you will want to do is copy everything from the iPod to your new iTunes library on your PC first.
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock
Maybe you are looking for
-
Won't boot, seems disk is gone?
Okay, I was on my iMac and it was running really slow, so reset it (Apple > Reset). It then comes up with a broken folder or whatever, and won't boot. I put in the installation disk, checked the Disk Utility and the only thing there is the Mac OSX In
-
currently own a external WD 1.5TB External for 2 years now and its did good for me,but im getting another one but which brand should i go with and what brand is better?
-
Filelds missing in the target system..........
Hi, While upgrade from 4.6 to ecc 6 we are facing an error which is follows, Error :FIELD NOT PRESENT IN TARGET SYSTEM ,Screen number:100,Field : RIBOF-IBASE,RIBOF-IBTYP,RIBOFO-MATNR,RIBOFO-SERNO.Error: SCREEN MISSING IN TARGET SYSTEM Program: 'SA
-
I need to mae 6 buttons: 1,2,3,4,5,6. When I press an button, my red die will show the approriate number and the coputer will also roll it simultaneously. But I have problem why I can't paint inside the string?? Help please!!! Here is one part my pro
-
Open with camera raw is gone, any ideas?
Open with camera raw is gone, any ideas thanks?