Hi, I have a Apple TV and we are trying to figure out how to transfer the iPad to our tv. Any ideas? Thanks
Hi, I have a Apple TV and we are trying to figure out how to transfer the iPad to our tv. Any ideas? Thanks
You can connect via a cable or wireless using an Apple TV.
http://ipad.about.com/od/iPad_Guide/a/How-To-Connect-Your-Ipad-To-Your-Tv.htm
iPad Accessories: Connections for a TV or Projector
http://www.dummies.com/how-to/content/ipad-accessories-connections-for-a-tv-or-p rojector.html
You may be interested in AirPlay on the Apple TV:
Apple - AirPlay - Play content from iOS devices on Apple TV
http://www.apple.com/airplay/
Alternately, there are Apple Digital AV Adapters for hardwired connections:
iOS: About Apple Digital AV Adapters
http://support.apple.com/kb/ht4108
Look at the Apple TV manual
http://support.apple.com/manuals/#appletv
Cheers, Tom
Similar Messages
-
Apple tech so far hasn't helped except to advise me to get manuals online that Sony doesn't post on its website. I've sent off an inquiry to Sony but don't expect an answer. Apple assumes my devices are bluetooth but the iPad2 hasn't figured out how to discover them, and I don't know how to make them discoverable. I'd like to have the option to use them but so far haven't been able to figure out how.
Heidi-
On the iPad, go to Settings-General-Bluetooth. Set Bluetooth to ON and a new window appears while the iPad searches for Bluetooth devices.
To get the keyboard into a discoverable mode, you may need to remove its batteries for a while. If it is not possible to get it to appear on the iPad, could the keyboard be defective? Can it be discovered by other computers?
Fred -
I have a Macbook Pro Apple . My photos are in iPhoto files. How do transfer the file I want to work on onto Photoshop?
Where iPhoto Pictures are Located and How to Access the iPhoto Library and Picture Files
-
I have an iphone 4 and downloaded my first movie (hd) onto my PC (windows 7) I have not been able to figure out how to transfer the move to my iphone. The movie is in a new tab called "rented" not under the "movie" tab. All of the support I have read talks about the movie being in the "movies" tab. I cannot use the "move" function or the "transfer" function because they are not available. Is this an issue because I just updated to the newest software?
In order to download to your phone over the air, you need to be connected to WiFi.
It's possible the Internet connection through Verizon is not stable enough for the downlaod to begin (it is a very large download).
You might want to head over to Starbucks with your laptop for the afternoon and see if you can download it over their WiFi. -
I cannot get an unlocked version of drivesafe.ly to operate on any accounts on my iphone 4S and have had no help when I asked them for support. I am now trying to figure out how to refund the product. Anyone know how to make that request through itunes?
Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.
-
looking for idiot proof directions on how to restore my pictures and music to my iMAC. It was services and the hard drive cleared of my files. I've reinstalled office 2011 and am now trying to ficture out how to get the pictures and music back. I backed up the machine prior to the service call, but don't seem to know how to restore the pictures and music.
It all depends on how you made the backup and with what application. How was the backup created?
-
I have recently had to fire my web designer who was using iWeb. Now I'm trying to figure out how to get the site to open in iWeb on my new MacBook Pro. Is there a way?
Firstly iWeb CAN'T IMPORT any kind of published html code as it has no import facility. You can however add html code, javascript and css by selecting the html snippet and placing it on your page the entering the code in here and clicking on Apply. You DO NOT create a shape as you say - you use the html snippet and place your code in there.
There are not really a lot of ways in which you can write code - if you want to enter small amounts of code, then you would use an ordinary text editor to do this such as Text Edit on a Mac or Text Wrangler. If you want to add code to iWeb like this, then you would either use the html snippet method in iWeb itself or you would have to publish the site to a local folder from iWeb and open the relevant html page with a text editor and add the additional code in this way and then publish. However, if he decided to add the code with a text editor, then you would have to upload the pages directly to the server using an ftp client - if you try to upload the site directly from iWeb, all the extra code will be overwritten.
As for checking whether the site was created using iWeb, all you need do is view the site in Safari and then click on View and then select View Source Code and it will tell you.
Even thoough extra code was added to the site and he might well have done this by publishing to a local folder and adding the code with a text editor, he should still have the domain file for the site too.
Ask again. I'm sure that for adding quick code, most would not want to use programmes such as Dreamweaver, but a simple text editor will suffice. As OT already said, if he claims that he does not have the domain.sites file, then try Flux 4 which is a web design programme and has full import facilities. At least this way, if he just gives you the published version of the site, you have some way of opening it.
You can download a free trial of Flux 4 and you can also purchase the full version from the Mac App Store if you decide you like it. -
see - I am so inept I have put the full question in the wrong place! I just want to pay for films on the apple tv and sit by the fire but the computer doesnt recognise my apple tv user name or password and I have now downloades itunes but what next as I cant hjomeshare. Also they dont tell you how to pay, surely you dont sit in front of the tv and put ini your card details - equally a bill cant come in the post - I know I am a techno phobe but am I the only one who thinks this handbook and website is NOT VERY HELPFUL.
There are several fairly simple steps to get going really.
1 - Set up an itunes account if you don't have one - do this on computer using itunes - payments can be by credit card registered to an address in your country or prepaid itunes voucher cards which have codes you enter in itunes to top up account credit.
2 - Connect AppleTV to TV with HDMI and turn on
3 - Set up AppleTV network settings - ethernet works best, wifi fine for most people to. Confirm you are connected to the internet by trying to play some free content from YouTube or Movie trailers etc.
4 - Configure your iTunes Store account in AppleTV settings - choose default of SD or HD downloads too for rentals. Once configured you should be able to rent/buy from the menus if connected to internet - you can choose for the unit to remember your password if you're happy with that - if others might run up big bills inadvertently don't allow it to remember your password.
5 - If you want to be able to purchase things and store locally in itunes then stream across your local network to AppleTV configure Home Sharing in iTunes - it normally appears in left side of itunes but disappears once set up.
Also are you running Windows or Mac OS - the interface may differ slightly in iTunes?
AC -
I have an ipod touch and when i went to the itunes store to download apps for it, they only have iphone or ipad listed for anything..is there one of those i should be using for ipod touch??
Iphone apps would be where you would find ipod compatible apps. Under the product description it will tell you what devies are compatible.
-
Does anyone have advice about how to move my photos from my android phone to my Macbook Air? The phone is no longer in service (I traded to an iphone) and I can't locate my cable--which may not have helped, anyway. I tried inserting my micro memory card into a USB reader, and the computer will not acknowledge any photos from the card. Thoughts?
I think you will find the cable to be very necessary.
For some phones - samsung for example, you may need to down load their manager program (I think samsung's is called Kies or keis) A bit like how one uses itunes to connect to a iphone.
Once you have the cable and are connected, you should see a file system and look for the DCIM directory. -
Hello friends
We are trying to move our music library stored on the Mac to a second ipad. We have already set up the second ipad and are only interested in getting select music onto the second ipad. When we plug the ipad into the imac and connect to iturnes it wants to set up or restore the second ipad. We're afraid if we do this it will remove all current information on the second ipad. ThanksDid you ever resolve the iCloud problem.I am in the same position and its driving me mad!!! If you have a link to an solution I would appreciate it.
-
it does not have the system update selection in the more advanced ipods
It can't be updated past 4.2.1.
(106092) -
Here's what I have so far.
var docRef = app.activeDocument;
if (docRef.swatches.getByName ("CutContour") === 'undefined') {
var spotNameCC = "CutContour";
var cmykColor = new CMYKColor();
cmykColor.cyan = 0;
cmykColor.magenta = 100;
cmykColor.yellow = 0;
cmykColor.black = 0;
// Create Spot
var spot = docRef.spots.add();
spot.color = cmykColor;
spot.colorType = ColorModel.SPOT;
spot.name = spotNameCC;
//var spotNameW = "WEED (r)";
// Create CMYKColor
/*var cmykColor2 = new CMYKColor();
cmykColor2.cyan = 50;
cmykColor2.magenta = 0;
cmykColor2.yellow = 50;
cmykColor2.black = 0;
// Create Spot
var spot2 = docRef.spots.add();
spot2.color = cmykColor2;
spot2.colorType = ColorModel.SPOT;
spot2.name = spotNameW;
Let me know what I did wrong lol I know it has to do with the detecting part. Also, if anyone knows any good websites to learn javascript I would be very thankful. I am not sure what a lot of the syntax means. Thanks!!Never mind I figured it out. Someone posted a similar question a few months ago on here, damn this forum is awesome wish I had known about it sooner. Sorry if I wasted anyone's time.
-
I recently set up multiple accounts on my imac, When I was trying to figure out how to share the documents I must have done something wrong. When logged into the Admin account, I open up any document and I get a message box that says, "The Document could not be opened. The file isn't in the correct format. The file might be corrupted, truncated, or in an unexpected format." What did I do and how do I fix it?
Without knowing what you did it is impossible to give advice on how to correct it.
If these were files you copied over from some other system then just Re-Copy them replacing the ones that are corrupted.
Other then that I suggest you Wipe the drive and start over with a clean reinstall of the OS and programs. Then if you want to share files to All Accounts place those files in a folder in the ROOT of the drive. -
I there i have a apple ibook and i need to update but i can,t remember the administrator password ,is there way i can change the administrator password,
Changing or resetting an account password
Maybe you are looking for
-
Store results into a variable...
How can I get a result I need into a variable, that I can use in a subsequent query. My initial thought was something like: select emp_id into MyVariable from emp where emp_NAME='Kevin'; select * from emp where emp_id='&MyVariable'; I'm doing this in
-
Mobile Banking BOA...This is a Killer App!
Man, I LOVE this one. *Mobile Banking*. My bank is Bank of America and I pay all bills through BOA Online Banking. What a great time saving feature. I also try and receive as MANY e-bills as I can. This is an email alert directly to you of a bill. So
-
Where is the mic on the ipod touch 4g
Is there only one mic which is next to the camera?
-
Incident/Accident Log - Create description field in new tab page
Dear all, I have a question about Incident/Accident Log. In the Incident/Accident Log, a new tab page and fields inside it can be created using class and characteristics, respectively. The characteristic value field is limited to 30 characters length
-
Alarm Clock 2 not working, any suggestions? Help!
Hi everyone, Alarm Clock 2 didn't wake me up this morning, I tested it, and it seems like the clock on the computer is going to sleep when the computer goes to sleep! Are there any free alarm clock programs out there that work with mountain lion?