Hi I have a macbook pro version 10.6.7 I cant install tunes 12 .and Ihave a i phone4, i cant use it with Itunes 10,,,I delete Itunes10,and now I cant use my Iphone with my macbook cause I don't have the correct version of Itunes
this is my problem ...I have a macbook pro version 10.6.7 and I cant install tunes 12 ....Ihave a i phone4, i cant use it with Itunes 10,,,I delete Itunes10,and now I cant use my Iphone with my macbook cause I don't have the correct version of Itunes,,,what is the version of Itunes i need to install?? i need it for my iphone 4 and my macbook 10.6.7
Run the Software Update pane of System Preferences or click here.
(121029)
Similar Messages
-
Hello, I need help with my macbook pro.
It looks like I cannot install anything anymore. Everytime I try to install a new software, I simply get stuck during the installation type process. I put in my password, it does accept it, but it does not go any further.
I tried to reset the password, put no password, repair the permissions, the disk but nothing will do. I nearly got stuck with the log in screen but finally succeeded in disabling it.
So I thought I might try to create a new account but I cannot click the lock to make changes. It simply refuses to react.
I am now thinking about using the migration assistant to save all my settings, data and so fourth, but again I get stuck when I have to type in my password. It accepts it but nothing happens...
I guess it has something to do with the authorization process, but can't find anything on the internet about it... Can you help me out?
I am running Lion 10.7.3.
Regards,
Nicolas.
(I apologize if any grammatical/structural mistakes were to be found, english is not my mother-tongue. )You probably won't like this suggestion, but I suggest you reinstall Lion.
First, backup your system. Next, reboot your system, press/hold the COMMAND-R keys to boot into the Recovery HD. Select 'Reinstall Mac OS X'. If you purchased Lion as an upgrade to Snow Leopard, the reinstall process will install Lion 10.7.3. If your system came preinstalled with Lion, you might still get Lion 10.7.2. Both installs are a total install of the OS. None of your apps or data will be impacted. Just the OS. -
i have macbook pro 13.3 inch. I am installing window 7 in boot camp manager after copying file of window upto 67% it doesn't response and i had forcely shotdown my macbook. Now my macbook doesn't open and stop in black screen with cursor blinking. Now how could i open my macbook pro.
At startup hold down the Option/Alt key and from the screen that comes up select your OS X partition to start the computer from. Then use the Boot Camp Assistant app to Remove Windows and the partition you reated for it and it will Automatically place the space you allocated for the Windows install back into the OS X partition.
NOTE:
Do NOT use Disk Utility to erase the partition that was created for the Windows install. Use the Boot Camp Assistant app again to do that. -
Just got a macbook pro, no disc drive. how do I install disc-based software? Do I have to buy an external drive? ARgh.
Yes, an external drive will be necessary. You may purchase the Mac superdrive from the online store or one from another manufacturer. All will work.
http://store.apple.com/us/product/MD564ZM/A/apple-usb-superdrive
Ciao. -
hello I was useing final cut pro 7 . I was sending video with blackmagic or i was catrueing but now i cant see blackmagick my mac system is mac os x 10.7.5
Thank you for your reply. My problem is I used to be able to send video via Blackmagic. But now I can not find the Blackmagic in the menu of premier. How can I divert any bridge with thunderbird or firewall?
Samsung cihazımdan gönderildi -
I have two questions...
1) If I do a clean install on my MacBook Pro will I be able to re-install apps (FCP, Aperture, MS Office etc.) from a Time Machine backup, or will I need the original install DVDs with authorization codes? (because I don't have them)
2) Has anyone ever seen anything like this before on their computers?
The Apple Genius' were stumped by my laptop issues and said they'd never seen anything like it before and recommended I did a clean install. Below you can see my trash bin, and if you look at the "Empty" button it reads "N201" and then there's the "N39" to the left of it. You can also see these numbers over by the folder area--"SD5, SD6, SD7." But that's not all...
When I right click on items I see the numbers again. Instead of "Open with" I get "N152" and there's an "N35" and "LB1" towards the bottom.
I have no idea what's going on so I'm just going to do a clean install on my machine but I don't want to lose my apps. I don't have the original install DVDs for them anymore. If you have any suggestions please let me know. Thanks!You don't lose them. You can always redownload them from the app store after you log back in with your Apple ID.
"Buy, download, and even redownload.
You can install apps on every Mac you use and even download them again. This is especially convenient when you buy a new Mac and want to load it with apps you already own." -
Macbook pro freezes for no reason even after installing 10.8 on a brand new hard drive
Macbook pro freezes for no reason even after installing 10.8 on a brand new hard drive.
Tried to reset pram, smc, nvram.
Tried installing new RAM.
Tried installing new hard drive.
You should know that my internal drive is installed in a cheap external case and plugged in a USB 2.0 port because i am waiting for a new hard drive cable.all
Yep all good things happened to me...i don't know if all these problems are linked, ahh and also my trackpad is behaving very erraticaly sometimes, it's like it is possessed by a ghost. My computer is not under warranty anymore so i'd like to avoid a trip to the Apple store but i'm close to doing just that.
Any help appreciated...It's diagnostic software. It's supposed to help you find problems. I don't think anyone is making any software yet that fixes hardware problems.
That said, the two comments:
Le husky wrote:
Macbook pro freezes for no reason even after installing 10.8 on a brand new hard drive....
.....also my trackpad is behaving very erraticaly sometimes, it's like it is possessed by a ghost....
would lead me to think it's the logic board. On older MacBook Pro's both the USB I/O ports and the keyboard/trackpad are fed out of an integrated USB controller integrated into the South Bridge I/O controller. On newer models, the USB ports come out of an integrated North/South bridge controller and the keyboard/trackpad are handled by an SMC controller, which itself interfaces with the I/O controller. All of these items are on the logic board, and they're all unrepairable.
...unless of course the "internal drive [that] is installed in a cheap external case" is itself causing the problems. Another thing to try might be a different USB port, if you haven't done so already.
I didn't know the price for Scannerz went up. I could have sworn I only paid 30-some bucks for it. Maybe it was on sale at the time. I don't remember.
In any case, good luck. -
I am a macbook pro user form last 2 yrs, recently i upgraded to Mountain Lion from Snow leopard. Since then operational speed is a major concern. Now It has crashed so very badly that I am scared of my data.Please help me.
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
My MacBook Pro is running very hot after lion install. Are there any hardware changes that will help? What can I do to get it back to normal?
I get the impression that most of the users on older hardware experiences similar temperature issues on Lion for a long time now. Awaiting for confirmation from the original poster.
In the meantime I'm just cautious with regards to pushing the machine to such extreme temps, since something tells me such behaviour which includes monitor flickering and the likes is nothing but abnormal for any type of use...
Any clues if 10.7.5 does anything on this? If not I'm afraid i see myself going back to SL for good... -
one of the key on my macbook pro is not working properly, can it be fixed by a cleaning spray or something. there is lot of dust in where I live and thought that might be the culprit. thanks Jason
Don't use any cleaning spray. Wipe with a moist but not wet microfiber cloth.
1. Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own"
2.Reset PRAM. http://support.apple.com/kb/PH4405 -
'MacBook Pro EFI Firmware Update (v2.3)' not installing
'MacBook Pro EFI Firmware Update (v2.3)' not installing
I've tried multiple times now to install this update. When I do, it downloads and my computer will restart around 5 times with the 'beep' the first time. Once its finished the restarts and resumes normally, I check the Software Update via the Apple menu and it still appears in the list of updates.
What's the cause of this and what can I do to resolve this?Is your machine plugged in when you do this? The firmware update will not take place unless your system is plugged in. You'll just get a black screen that flashes a few times and it will eventually boot regularly back to what it was. If the firmware is installing, you'll see a progress bar at the bottom of your display.
-
I have an education version of cs 6 creative suite, I have the box and used in once on my old laptop I am now trying to find serial number to reuse on new laptop but only have product code and product number
Hi Sophie,
Normally you can find your serial registered to your AdobeId. To find it please login to the Adobe website and check if you did register it to your account.
Serial number, Redemption, and Product codes | Student & Teacher Editions
In general you will go true a educational verification afterwards you get the serial. So its in your email or account. If you still have issues get in contact with the chat team to get help.
Good luck! -
I bought my macbook pro in march 2007. I am currently running osx 10.6.8, but want to upgrade to lion or mtn lion. Apple website says i need a mid 2007 or later macbook pro, how do I tell if my Macbook pro will support this upgrade?
The Mid-2007 model didn't come out until June 2007, so you must have bought an earlier model. It won't run Mountain Lion (OS X 10.8.x), but it might run Lion (10.7.x) if you can get hold of a copy, depending on which earlier model it is.
Lion requires at least a Intel Core 2 Duo processor. The first MacBook Pros came out in January 2006, but they had "Core Duo" processors (no "2"). The Core 2 Duo MacBook Pros came out in October 2006. You could have bought either in March 2007. -
How can I sync my various email accounts into an iCloud account. Example. I have an embarqmail.account. How can I get it to sync with iPhone, iPad, iMac so that I don't have to read or review eMails on all 3 devices. Thanks
You need OSX 10.7.2 or higher in order to access icloud. The mobile me account is now defunct (it closed down more than a year ago).
-
After I downloaded and install the latest iTunes software upgrade (to 10.5.1), I am no longer able to download free upgrades to the apps on my iPhone or iPad.
The App Store just says I "don't own the major versions", which of course is nonsense. It seems as if Apple's iTunes/App Store has deleted my download history. Any suggestions?
Regards,
BruceActually It doesn't. It says he's on a MacBook. I don't know all the different types of Macs. I was having a ton of problems with iChat. I opened DMZ to my computer, knocked down all firewalls etc and left everything exposed, still with bad results. A few weeks ago my power supply went out on my D-Link. I bought a linksys. Since I'd left all firewalls off I figured it couldn't be the router. I power cycled everything n the netork, still no luck. Today I bought a universal Power supply and started up my D-Link Router. Everything worked perfectly. My wifes computer - a laptop running Tiger worked fine with the Linksys and did my machine before the Leopard upgrade. Now that I've got the D-Link online everythings working.
Message was edited by: graphico
Message was edited by: graphico
Maybe you are looking for
-
WRT160N wont' recognize modem and other issues
To prevent a wall of text from being even taller, here are the three topographies presented in some crude visuals: Default, Option "A" Better, Option "B" Optimal, Option "C" On second thought those images are pretty tall. That totally backfired. Enjo
-
ERROR 500 when testing webservice
Hy, I work in 10.3.3 weblogic envirement with AIX OS. I've deployed a web service which calls a datasource. I've done the first test at the deployment tests to see the wsdl but i get the error 500. Moreover, i saw these errors in the logfile Could yo
-
Freight Carrier Form not showing all records
The Freight Carrier form is not showing all of the data that shows in the table (ORG_FREIGHT). For the Organization that I am in (#23) the table shows 108 records but the form only shows 35 records. Why? How can I make the form see all of the records
-
Project documentation tab - cannot access own templates
We are using SM4.0. In the project template I have created new document types and assigned templates to the document types. When using these to create docuements in the Blueprint Project Documentation tab, the templates are not defaulted, we just get
-
Outlook 2011 for Mac, email account setup
Im trying to setup my dad's email on his new Mac desktop on Outlook. I added all the info on the account settings but it still won't receive email. This is the message i keep getting when i try to refresh Outlook. "Outlook cannot fine the server. Ver