Hi,i have a very big problem....i had an accident with my macbook , i poured some champagne and it does not start anymore....it will work again???

hi,i have a very big problem....i had an accident with my macbook , i poured some champagne and it does not start anymore....it will work again???

If you spilled champagne on it, chances are not good. If you haven't alredy DO NOT turn it on or charge it. I would immediately take it to the Genius Bar and see if they can clean it up before.
Had the same problem with a 15" MBP and a tea spill and I did the opposite. Trashed the Logic & Keyboard Assembly. Cost to repair was going to be more than what I paid for a computer so ended up having to replace it.

Similar Messages

TS1559 I have 4s. After I updated ios7.0.3 my wifi is geyed out. I expected after ios7.0.4 update wifi will work again, but does not. It annoying, because I have to use my data... Does anyone know when it will be fixed or does anyone have the same problem

I have 4s. After I updated ios7.0.3 my wifi is geyed out. I expected after ios7.0.4 update wifi will work again, but does not. It annoying, because I have to use my data... Does anyone know when it will be fixed or does anyone have the same problem?

I have the same problem. After the upgrade, my wifi is greyed out, and the battery won't hold a charge long. I reset all the settings, tried all the things suggested by Apple, but it didn't work. I took the phone to Verizon, but they said they can't fix it, go to Apple
I made an appointment at the Genius bar, where the staff was incredibly rude and dismissive. A representative told me that the wi-fi is broken and I would need to buy a new phone for $200, because mine is out of warranty. I'm due for an upgrade in a few months, so I'm not going to pay $200 for another 4S now. I'm also not going to buy any more Apple products. Their upgrade caused this problem, and they are not standing behind their producet.

HT1349 Have gone to sync Itunes and program does not start up. Have uninstalled and reinstalled and still nothing. Very frustrating as it has 6 devices I maintain.

Have gone to update and sync Iphones and Ipods and Itunes does not start up.

Both the sccbase.dll and slbcsp.dll failed giving the error "LoadLibrary("xxxxxx.dll") failed. - The specified module could not be found."
There's our likely culprits. We'd better try swapping them out on the PC.
(The instructions I'm about to give are quite possibly going to sound odd ... I'll explain what we're doing and why at the end of the post.)
Navigate to the C:\Windows\System32\ directory. (If you've set a different directory from \Windows\ as your Systemroot, look for \System32\in the alternate Systemroot rather than Windows.)
Can you see sccbase.dll and slbcsp.dll in there?
If so, drag each of them to your Desktop.
Now close the C:\Windows\System32\ window, wait about 5 seconds, and then open navigate to C:\Windows\System32\ again. Have copies of sccbase.dll and slbcsp.dll reappeared in that directory?
If one or both of the dlls aren't replaced and/or you get an error message from Windows saying you have a system file missing, move the dlls back into \System32\ from your desktop, and post back.
(What we're doing here is using XP's Windows File Protection system. It maintains a \dllcache where copies of essential dlls are kept on the PC. If it detects that a dll from \System32\ is missing, or has been replaced by an earlier version, and it has a current version of the dll in the dllcache, it will move a copy of the correct version of the dll into \System32\. There's more information about this in the following document from Microsoft: Description of the Windows File Protection feature.)
If the dlls are replaced, try restarting the PC and then relaunching iTunes again. Does it launch this time?
If it doesn't launch, try reregistering sccbase.dll and slbscp.dll again. Do they reregister properly, or do you get an error message again?

WLS5.1 SP8 problem : weblogic does not start anymore : method getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not found

Hello,
I currently have a problem with the EJBException which does not give the
client the getCausedBy() Exception. I d' like to try the 5.1 sp8 to see if
the bug is fix.
Unfortunately, after having installed the sp8, my WLS 5.1 does not start
anymore : I get an invocationTargetException.
Does anyone have a clue ?
Best Regards.
dom
The WebLogic Server did not start up properly.
Exception raised: java.lang.reflect.InvocationTargetException
java.lang.reflect.InvocationTargetException: java.lang.NoSuchMethodError:
weblogic.boot.ServerClassLoader: method
getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not found
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:141)
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:113)
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:105)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.<init>(Recurs
iveReloadOnModifyClassLoader.java:53)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$SingleSlave.<
init>(RecursiveReloadOnModifyClassLoader.java:149)
at
weblogic.servlet.internal.ServletContextImpl.setClassLoader(ServletContextIm
pl.java:1571)
at
weblogic.servlet.internal.ServletContextImpl.<init>(ServletContextImpl.java:
539)
at
weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java:523)
at weblogic.t3.srvr.HttpServer.start(HttpServer.java:418)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:1312)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:827)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
at weblogic.NTServiceHelper.run(NTServiceHelper.java:19)
at java.lang.Thread.run(Thread.java:479)
java.lang.NoSuchMethodError: weblogic.boot.ServerClassLoader: method
getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not found
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:141)
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:113)
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:105)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.<init>(Recurs
iveReloadOnModifyClassLoader.java:53)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$SingleSlave.<
init>(RecursiveReloadOnModifyClassLoader.java:149)
at
weblogic.servlet.internal.ServletContextImpl.setClassLoader(ServletContextIm
pl.java:1571)
at
weblogic.servlet.internal.ServletContextImpl.<init>(ServletContextImpl.java:
539)
at
weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java:523)
at weblogic.t3.srvr.HttpServer.start(HttpServer.java:418)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:1312)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:827)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
at weblogic.NTServiceHelper.run(NTServiceHelper.java:19)
at java.lang.Thread.run(Thread.java:479)
tel 02 38 64 37 95
mailto:[email protected]

Well... I've made a big classpath mistake.
It works indeed.
dom
"Dominique Jean-Prost" <[email protected]> a écrit dans le
message news: [email protected]...
Hello,
I currently have a problem with the EJBException which does not give the
client the getCausedBy() Exception. I d' like to try the 5.1 sp8 to see if
the bug is fix.
Unfortunately, after having installed the sp8, my WLS 5.1 does not start
anymore : I get an invocationTargetException.
Does anyone have a clue ?
Best Regards.
dom
The WebLogic Server did not start up properly.
Exception raised: java.lang.reflect.InvocationTargetException
java.lang.reflect.InvocationTargetException: java.lang.NoSuchMethodError:
weblogic.boot.ServerClassLoader: method
getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not found
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:141)
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:113)
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:105)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.<init>(Recurs
iveReloadOnModifyClassLoader.java:53)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$SingleSlave.<
init>(RecursiveReloadOnModifyClassLoader.java:149)
at
weblogic.servlet.internal.ServletContextImpl.setClassLoader(ServletContextIm
pl.java:1571)
at
weblogic.servlet.internal.ServletContextImpl.<init>(ServletContextImpl.java:
539)
at
weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java:523)
at weblogic.t3.srvr.HttpServer.start(HttpServer.java:418)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:1312)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:827)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
at weblogic.NTServiceHelper.run(NTServiceHelper.java:19)
at java.lang.Thread.run(Thread.java:479)
java.lang.NoSuchMethodError: weblogic.boot.ServerClassLoader: method
getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not found
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:141)
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:113)
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:105)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.<init>(Recurs
iveReloadOnModifyClassLoader.java:53)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$SingleSlave.<
init>(RecursiveReloadOnModifyClassLoader.java:149)
at
weblogic.servlet.internal.ServletContextImpl.setClassLoader(ServletContextIm
pl.java:1571)
at
weblogic.servlet.internal.ServletContextImpl.<init>(ServletContextImpl.java:
539)
at
weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java:523)
at weblogic.t3.srvr.HttpServer.start(HttpServer.java:418)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:1312)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:827)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
at weblogic.NTServiceHelper.run(NTServiceHelper.java:19)
at java.lang.Thread.run(Thread.java:479)
tel 02 38 64 37 95
mailto:[email protected]

I have changed my icloud email in my iphone but in macbook still using old email. I tried to delete the old email in macbook but it requires password and it does not accept the old password for the old email anymore. How do I remove this old email?

I have changed my icloud email in my iphone but in macbook still using old email. I tried to delete the old email in macbook but it requires password and it does not accept the old password for the old email anymore. How do I remove this old email?

Hello farahani hairon nizar,
If your Apple ID was changed from your old account, you may have to change it back to your old account to be able to sign out and then change it back after that is done. Take a look at the article below for more information.
If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/en-us/HT203828
Regards,
-Norm G.

I have a very big problem with my mac book pro. It continously looses the wifire connection. This happens every 5-10 minutes and is getting to be a very big irritation. I have tested my wifiresignal

I have a very irritating problem with my MacBook Pro. It keeps loosing the wifi connection - every 5-1o minutes!!!
I have testet the wifi signal and had my router checked - both are fine.
Please tell me what I can do :-(
John

First you should check on another Wifi to see if it's your Lion machine.
If it only occurs on your Wifi, then perhaps you have local interference and need to set the router on another channel far from others.
You can install a free program called KisMAC that you set your Driver Preferences to Apple Airport Extreme Passive Mode, enter your Admin password and monitor your local Wifi signals, see if you cna pin point the cause of your interference or meddler.
If your not running WPA2 with AES and a 12 plus random character/letter/number password for both Admin and Internet access use only then you should seriously consider doing so.
http://www.tomshardware.com/reviews/wireless-security-hack,2981-10.html

I have problem with iphone4....it closed and it does not open

my iphone closed and it does not open

Hello,
Thanks for your quick answer. What is DFU mode? My problem is that the iPhone does not respond at all.
I am trying with the cable of the iPod now, but still the same: the laptop does not detect the iPhone and the iPhone does not turn on. I think the iPhone cable works because when I connect it to the power as if I was charging the battery, the Apple logo appears on the screen but that's all. I only have one computer at home.
Cheers,
Manu Bresson

I have a very big problem in my data recovery data recovery

I made a backup through blackbery link
I made booting device. I'm trying to restore the data to the device. I get an error "Your computer can not connect to the device, turn the device"
When the power is turned on
Please bring me a solution
I have lots and lots of important data

Hi..
1. Open Control Panel and go to Device manager.
2. Scroll down the network adapter section and you will see “Blackberry #3? or something similar like one for Blackberry Device and the other for Blackberry Virtual Private Network.
3. No matter what the name was, double-click on the additional item named BlackBerryDevice with exclamation mark, go to Drivers tab and click Uninstall button.
4. There is a Monitor with magnifying glass icon at the top right of Device Manger. CLick on it to scan for hardware Changes. Now re-plug your Z10 in back again.
Thanks
Please update the result after applied..
Thanks

HT5887 I am wondering if somebody else have problems with Airdrop, I just configured the option and it does not work. My friends can see me, but I can not see them.

I am sad, I have days trying to use Airdrop, my friends can see me, but I can not see them. I turned on my Wi-Fi, Bluetooth and I selected the option "available for ALL".... and nothing. I can receive photos from my friends... mean It work for them. I just restarted the phone to the basics configuration but it does not work, my phone still does not recognize my contacts.

warranty will cover it. Did you try only by changing the power adapter or did you change both cable and power adapter?
if you did the latter, see this page: https://www.apple.com/support/iphone/repair/battery-power/
you'll be able to contact Apple Support from there.

I have a very big problem with my icloud acc

On 9th of this month , i erase my another device from my "find my iphone " app , after ther i write on my phone the icloud acc and when i want to press on that iphone's back-up , i can't find it , i must say that , on my another device , when i enter settings -> icloud -> storage -> manage storage , i can see that back-up and it have 8.9 gb .... what's the problem ? i lost so many photos and i really want them back....

Hi Leleli,
I apologize, I'm a bit unclear on the exact nature of the issue you are describing. If you are saying that you are having issues restoring your current iPhone from a previous iPhone's iCloud backup, you may find the information and steps outlined in the following articles helpful:
iCloud: Restore or set up your iOS device from iCloud
If you need help restoring an iCloud backup - Apple Support
Regards,
- Brenden

I Have a Very BIG Problem

I'm trying to get one of my CS4 project to work in CS5 but one of the video files that I used is I guess not compatible with CS5. I reinstalled CS4 and tried opening it, but it had a start up error while initializing media core. I figured out that if I uninstall quick time then I can open it up. But the video file is a .mov with a png codec. What that means is that without Quicktime, After Effects can't decode it. I can't convert the video file because as far as I know the png codec in a .mov file is the only video file that as far as I know works with opacity and transparency. If you have a solution to one or many of these problems please leave a post down below.

I can't convert the video file because as far as I know the png codec in a .mov file is the only video file that as far as I know works with opacity and transparency.
Why not? What's stopping you to use a PNG, PSD, TGA or TIFF image sequence, all of which support Alpha/ transparency? that aside, CS5 handles QT files just fine, but it would seem that you have a permission or other problem that prevents the relevant service from being launched, so please provide some more details about your system and as a minor test, try to run as administrator.
Mylenium

Hello,I have a very big problem in my the new ipad

hello my problem is im my the new ipads touch// yesterday I was download one game in app store after 5min this touch was hanging and I cant do with this touch and I hold this power and it go to lock/ to day I cant (slide to unlock) but this home botton and vol and sensors are ok I dont have any problem but this touch is hang what can I do????
I am in iran...

Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider.

Whenever starting Firefox I get a message. "runtime error" and firefox does not start. Have deleted the software several time and tried new dowload and start. In vain. thanks for your help

When starting Firefox I got a message saying
"Runtime Error! This application has requested Runtime to terminate it in an unusual way. Please contact the application's support team for more information."
I have unistalledFirefox several times and reinstalled 3.6 without success.
Thanks for your help

Refer to this article to fix:
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299

I have an Imac using the old Classic operating system. The printer I was using died and I need a new printer that will work on the OS 9.1/9.2 operating system. Does the install disk that comes with the printer allow the computer to communicate with the

My printer died and I need a printer that is compatable with OS 9.1/9.2. Some printers say they are compatible with OS 9.1/9.2 but do they need a driver or is it included with the install disk that comes with the printer?

As long as the printer is accurately described as being compatible with OS 9.1/9.2, if it needs to have software (such as drivers) installed that software should either be included (usual) or downloadable from the net(usually from the manufacyrer's website).
Not all non-Apple printers need drivers installed. Some, such as many Postscript ones that connect via ethernet, are quite comfortable using the LaserWriter 8 printware that's part of OS 9. Some of those, though, may need to have a model-specific PPD (Postscript Printer Description) installed, a small document that informs the printware of the capabilities of the printer.

My version of Adobe Acrobat 9 Pro Extended does not start anymore. I am reinstalling. I don't have my product code. Will it ask me for that code or will it take it from the previous copy?

How do I find my old 'license key'?

You can also follow http://helpx.adobe.com/x-productkb/global/find-serial-number.html#adobeproductdownload to try to recover your S/N. There are other ways for your existing installation too.

Hi,i have a very big problem....i had an accident with my macbook , i poured some champagne and it does not start anymore....it will work again???

Similar Messages

Maybe you are looking for