Hi, I have an iPhone 5s, recently its been a lot hotter than usual, also the battery life is going down a lot faster than usual, and it takes absolutely ages to charge up. There must be a serious problem with the battery, any ideas? thanks

Hi, I have an iPhone 5s, recently its been a lot hotter than usual, also the battery life is going down a lot faster than usual, and it takes absolutely ages to charge up. There must be a serious problem with the battery, any ideas? thanks

Apple can replace the battery for $79 US.
http://support.apple.com/kb/index?page=servicefaq&product=iphone

Similar Messages

  • HT1476 my iPhone 4 will no longer charge. It is also not recognised in iTunes. There seems to be a problem with the connector slot. I've tried other cables and other computers/plugs but the connection is not being made. Any suggestions?

    my iPhone 4 will no longer charge. It is also not recognised in iTunes. There seems to be a problem with the connector slot. I've tried other cables and other computers/plugs but the connection is not being made. Any suggestions?
    It seems to me that the connection port is faulty.
    George

    Looks like a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
    Be sure to make an appointment first...

  • My Client is having a serious problem with the Contact Form Widget

    My Client is having a serious problem with the Contact Form Widget that I can not figure out how to correct.
    I created a website for a client and inserted a Contact Form widget on their 'Contact Us' page. Whenever anyone uses the form, the e-mail my client receive shows my e-mail address as the sender. So, when they 'reply' to the e-mail, the reply is sent to me and not the person who sent the original message. This creates a major problem in that I get barraged with e-mail replies while my client's potential customers go without a response.
    When I look at  'Site Manager > System E-Mails > Workflow Information > E-mail From Address' on the site's Admin Console, it shows my e-mail information. Is this is what needs to be changed?  If it is, what needs to be placed in that field so that the e-mail my client receives shows the senders e-mail information in the 'From' field.  My client wants to be able to click reply and have the message sent to the right party. They would be very upset if they have to cut and past the senders e-mail address from the body text on every contact they receive.
    Their feeling is that if I can't find a way to make the contact form work the way it should, then it's useless to them.
    Can anyone help me figure this out? I really don't want to disappoint my first client.

    Are you on a plan that has the CRM feature that stores your customers' data? If so, the idea of the contact form is that you'll receive a notification that there's been an inquiry filled out on your contact form and there should be a link in that email notification that leads to the "Case" that was created when that customer filled out a contact form.  You can click that link and visit the case for that customer in your BC site and reply to them from there so that all of the correspondence is logged in the CRM for safe-keeping and for your records.
    If your client finds this is too much work to login to BC to reply every time, then you should check to see if you have the "Customer Service Ticketing" feature on your hosting plan.  This is a feature where you create a dedicated email account (like [email protected]) and the BC system will automatically login to that email account and pull any emails in that inbox and convert them to a customer case for the sender of the email and then it will send out a notification via email to any of the BC Admin users you delegate as "Customer Service Agents".  Since the CST integrates with the BC CRM it lets you reply directly within the email-- but when you reply it will be going to that same email address dedicated to the CST but once the CST service checks your email again and sees that you replied to this inquiry it will log your reply against the customer's case and sends your reply via email back to them so that all the correspondance gets logged on BC's CRM but you can still reply via email.
    There's no way to use the default web forms to update the "From" or "Reply-To" address.. it must come from an approved email address to avoid spam issues.  On most web services you cannot change the "from" address anyway but usually you can at least specify the "Reply-To" address so that when someone hits "reply" in their email client it will reply to whoever you setup as the "Reply-To" address.
    Here's some more information about CST: http://kb.worldsecuresystems.com/kb/customer-service-ticketing.html?bc-partner
    I don't think the CST feature is in the webMarketing BC plan-- I think it's only in the webCommerce plan so if you have less than an webCommerce plan you have to tell your client to reply through BC by clicking the link in the notification they get.  You can justify it by saying its one or two more steps but it keeps the entire convo on record in their CRM for easy referral later.

  • Word experienced a serious problem with the 'acrobat pdfmaker office com addin' add-in. after Office Updates.

    I cant cant use mail merge feature in Winword in conjunction with Abobe Acrobat 10 (pdfmaker add-in) after the recent Office April Windows and Office Updates.
    Here is a quick note from the event viewer:
    The program WINWORD.EXE version 14.0.7134.5000 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel. 
     Process ID: 1138 
     Start Time: 01d07dcede19c458 
     Termination Time: 15 
     Application Path: C:\Program (file:///C:/Program) Files (x86)\Microsoft Office\Office14\WINWORD.EXE 
     Report Id: 
    Microsoft Word: Accepted Safe Mode action : Word experienced a serious problem with the 'acrobat pdfmaker office com addin' add-in. If you have seen this message multiple times, you should disable
    this add-in and check to see if an update is available. Do you want to disable this add-in?.
    I do not wish to disable the pdfmaker add-in as I use it to run mail merge on WORD and send 10s and 1000s of pdfs via email to external users. I am not sure what are my options here and I wish
    someone could help me get to the root cause of the matter.
    My environment is as follows:
    Windows 7 x64 SP1
    Office 2010 v 14.0.7128.5000
    Adobe Reader MUI X and Adobe Acrobat X
    Feroze

    Hi,
    As the event log indicated, this is due to acrobat pdfmaker office com addin doesn't work well with Microsoft Word.
    I would suggest you go ahead and try to upgrade your Adobe product to the latest version and see if issue persists.
    Or contact the support of Adobe and see if there is a known compatibility issue or not.
    Regards,
    Ethan Hua
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • PowerPoint experienced a serious problem with the 'adobe presenter powerpoint com addin' add-in.

    I've installed Adobe Presenter V7.0.7 Build 7746. When I open an existing PowerPoint file and try and use Presenter, I get the following error: PowerPoint experienced a serious problem with the 'adobe presenter powerpoint com addin' add-in. If you have seen this message multiple times, you should disable this add-in and check to see if an update is available. Do you want to disable this add-in?
    No, I don't want to disable it. When I click No, PowerPoint stops working. I get a message that says: Microsoft PowerPoint has stopped working. A problem caused the program to stop working correctly, Widows will close the program and notify you if a solution is available. My only choice is to click the Close program button.
    When I open the PPT file again, I get the same "experienced a serious problem" message. If anyone has a solution to this, I'd appreciate knowing what it is. It took me a while just to get the Presenter option to appear in the PowerPoint toolbar. Now that I have it, it's not working.
    Thank you!

    Thank you for your quick reply. Here are the answers to your questions.
    1. The file I'm having issues with was not created using any version of Presenter. It is simply a PowerPoint file.
    2. The file is a PPT not PPTX.
    3. I am running Windows7 and Office 2010.
    I think I might have found the solution to the problem. I opened the PPT file and saved it as a PPTX file. Then I clicked the Presenter option in the PowerPoint toolbar and was able to select different Presenter options with no issues. I opened other PPTX files and I did not get the error window stating 'PowerPoint experienced a serious problem with the 'adobe presenter powerpoint com addin' add-in'.
    This seems to work. So, it appears that any PPT file needs to be saved as a PPTX file before using Presenter. If you have another solution that I might be able to keep in my back pocket (in case this happens again and what I did does not work), then please answer. Otherwise, I'm good now.
    Thanks!

  • While installing adobe creative cloud , getting the following error msg " There seems to be a problem with the download process. Error code:201"

    while installing adobe creative cloud , getting the following error msg " There seems to be a problem with the download process. Error code:201"

    Creative Cloud Help / Error downloading Creative Cloud applications
    http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html

  • There seems to be a problem with the file download. For troubleshooting tips, please visit our customer support page

    There seems to be a problem with the file download. For troubleshooting tips, please visit our customer support page.

    Thank you for the update Dlawrenceusa.  I would recommend reviewing the installation logs for the updates that are failing to apply to determine the exact cause of the failure.  You can find details on how to locate and interpret the installation log files at Creative Cloud Help / Troubleshoot install issues with log files | CC.  You are welcome to post any specific error messages you discover to this discussion.

  • I am trying to get the free trial to cc but it said there seems to be a problem with the files (Error code: 205)

    I am trying to get the free trial to cc but it said there seems to be a problem with the files (Error code: 205) please help

    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • When I print a photo to my epson printer, it comes out larger than the original photo - so the photo prints beyond the borders. Tried readjusting all sorts of things but nothing helps. I had this same problem with my Canon. any ideas?

    When I print a photo to my epson printer, it comes out larger than the original photo - so the photo prints beyond the borders. Tried readjusting all sorts of things but nothing helps. I had this same problem with my Canon. any ideas?

    Crop to the print size before pringing
    LN

  • Serious problem after migration assistant - any ideas?

    Hi folks-
    I bought an iMac this weekend and for various reasons did not configure with data from my MacBook Pro when I first turned it on, but waited until two nights ago to use Migration Assistant to transfer all but users.
    I updates both machines fully with Software Update first. MigAsst went fine until I hit the begin option and after a few minutes the iMac told me there was a problem with my MacBook Pro (MBP). I quit MigAsst on the iMac but even after an hour I couldn't escape it or quit the MBP, so shut down using the power button.
    When I restarted, I had a black screen with lighted keyboard and startup chime. I hard-restarted, same thing happened. Third time, I got the grey apple window with no apple for about ten minutes, then a light blue screen with the spinning spokes (not the rainbow) and a slightly darker window with no spokes. The two blue windows alternated back and forth for maybe 8-10 seconds each endlessly until I restarted.
    Since I live about 4 hours from the nearest Apple store and tech support was already closed for the evening, I restarted from the Snow Leopard disk and repaired permissions (there were many repairs) and repaired the disk (was told it was fine). I restarted and got the grey-blue-blue cycle again.
    I reinstalled the OS from the Snow Leopard disk and everything worked fine - I ran as many tests as I know how to, even perturbed the casing slightly wondering if it was a loose video card wire or something. Nothing. It all worked fine for several hours until after the second Software Update (which as I recall was only Java and iTunes), and now all I get is the black screen again. Also, now the green light on the power cable is not glowing even though the battery reads as fully charged and the keyboard and startup chime are all hunky dory.
    I'd think it was a video card issue, but there are too many incongruous symptoms. If I could at least start up from the OS disk again I could get my data off... Any ideas, diagnoses or suggestions would be much appreciated.
    With gratitude and blessings.

    The problem is described in a different post as well, and it is considered to be answered. However, the answers are not very satisfactory because they are complicated.
    The underlying problem is that MacOS is looking for a FileVault user, while after migration the user files are actually not within a FileVault bundle.
    I believe that there must be a setting to change the login properties for the user to not look for a FileVault user, but for a plain, non-encrypted user. So please, somebody from Apple answer this questions!
    Command line very welcome, because I only have a command line user right now. And oh, my MBA didn't ship with a boot DVD so I don't even have the chance to reinstall my system easily. Also, getting my data out of the FileVault on my current machine, transfering everything again (almost 250 GB) and then putting them back into FileVault seems a bit too much effort for what appears to be a simple bit set somewhere…

  • How to solve a serious problem with the Battary of my T500 laptop ?

    Hi Forum,
    My personal laptop is Lenovo THINKPAD T500 2055, and its main specifications are as follows:
    - 39T6651 SBB 9 CELL LI-ION BATTERY
    - Intel Core 2 Duo processor T9400 (2.53GHz 1066MHz 6MBL2)
    - 8 GB DDR3 SDRAM Memory Module 4 GB (2 x 4 GB) 1066MHz DDR31066/PC38500 DDR3 SDRAM SoDIMM Kingston.
    - 2 GB Intel Turbo Memory hard drive cache.
    - ATI Mobility Radeon 3650 with 256MB.
    - 160 GB Hard Disk Drive, 7200rpm.
    - Windows 7 Ultimate with the latest Service Pack (x64).
    My problem precisely and concisely is the Battary. I have been using my laptop with the same battary since 01.01.2009 (Almost 3.5 Years), and the battary has been working quite OK.
    Most of the time my laptop is plugged in and working with the electricity. However, A very few times I used the laptop while it is running on battery, Nevertheless, I have the habit to empty the batter once in a while i.e. Every 3 weeks, I unplug the charger and keep using the laptop till I see the warning orange sign (5%), then, I plug it in again.
    Thankfully, I never had any problems with the battary nor the laptop, and when I charge the laptop usually it shows full sign (100%).
    Three days ago, All of a sudden my laptop starts flashing the orange battary sign constantly while charge indicates 100%. When I try running on the battery by unplugging the AC adapter, the laptop loses power immediately and shuts down right away.
    What do you think should I do? Could you please provide me any useful tips to resolve this problem?
    I would greatly and sincerely appreciate all your inputs !
    Thanks for your consideration of my request, and I very much look forward to hearing from you at your earliest convenience !
    Solved!
    Go to Solution.

    In the control panel goto the "Lenovo - Power Manager" and click the battery tab, there is a maintenance button in there that will let you change the charging profile for your battery.   (from memory, so exact wording may be off)
     The lower the numbers you use there, the longer the battery *should* last.    These batteries degrade faster at higher charge levels, however storing them at too low of levels is also not good for them... I've read that 40% is optimal, but just not realistic if you use your computer.
    --- ThinkPad T61 / Win 7 / Core 2 / 4gb RAM / Nvidia / Still used daily --- ThinkPad Edge 15/ i5 / Win 7 / TrueCrypt / 8gb RAM / Hated it, died at 1 yr 1 mo old --- ThinkPad T510 / Win 7 / TrueCrypt / i5 / 8gb RAM / Nvidia / Current primary machine --- ThinkPad X220 / i7 / IPS / 4gb / TrueCrypt / My Road Machine

  • I bought an iphone4 from a friend and he was on orange i have put my o2 sim in the phone and it is saying restricted network with no service any ideas thanks

    I bought an iphone4 from a friend and he was using it on orange i have put my o2 sim in the phone and it is saying restricted network with no service any ideas thanks

    That is because the phone is locked to the Orange network and an o2 sim card is not going to work with a phone that is locked to Orange.
    You either need to purchase an Orange sim card and use that in the phone, or you need to get your friend to contract Orange and get the phone unlocked so that you can use an 02 sim card.
    At the moment you will never be able to use the 02 sim card if the phone is locked to Orange.  Either use Orange or get the phone unlocked.  It is as simple as that.

  • I have an IPhone 4 lately its been still on but the screen goes dark then after a while of trying to get it to normal again it goes back now i cant get it to go back now

    I have an Iphone 4 and lately the screen has been going dark but i know its still on because i can here it if so,eone calls me or text me .however this morning it went dark agian but i wasnt able to get it visibale agian i tried to hold down the home and power button but then ikt asked me to download or update itunes or it wanted me to recover it so i did and my phone went on for a few min but went  off agian so i tryed to do it a few more times and i still dont know whats wrong with it

    Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

  • Seriously!?!  Serious problems with the customer support and AppleCare.

    I have a macbook pro.  I've had it since Aug 2007, so it's old, i get it. But I'm a poor starving student and I bought the computer with the idea that it was a quality product that would last me though my studies.  However, it has been the shop for repairs literally, every year, often multiple times per year, since I bought it.  Everything from DVD (twice failed, more than two visits), to hard drive failure, to replacing the motherboard.  That's just what I remember.  The thing is a lemon.
    Fortunately I bought apple care, great idea right? It was for the first year or two.  However over a year before AppleCare was set to expire it started having problems over heating, freezing, and subsequently giving me that scary roll down 'restart your computer immediately screen'.  It gets so hot you can't set it on your lap - it burns. I repeatedly brought it into the shop for help (the flagship one on Regents Street in London), and they couldn't seem to do anything.  When I explained time was of the essence because I wanted it covered under AppleCare, they seemed unbothered, it seeed they were clearly waiting for it to expire first.  Dodgy.
    During the appointments they couldn't seem to replicate the issue in the shop (it take about 30 minutes to an hour to really scorch, and seems to not be related to how hard the CPU works).  And said because they could see it do it, they were not able to help.  Really, in the whole history of apple, I'm the only one to have a computer over heat?  Really?  Instead, they sent me away asking me to come back later "when it starts doing it again".  Okay, as I said, it always overheats, it just takes a while to start, so unless we sit together in quiet awkwardness waiting, and waiting, it's not going to happen.  And as the appointments take about three days to get so it's not like I can just pop round when it starts to happen and say, feel, it's really hot now, will you please, for the love of God, find a solution now?  And it's a bit of a walk to the store, and there are no internet cafe's near by for me to go heat it up at, so it's always going to cool before I arrive. Duh.
    And why is the burden of proof on me?  It's like they are insinuating that I just love popping round the apple store every few months, all the vain hope that I can have a ...free part?
    Still I persevered, taking it in when the problem seemed to exacerbate, and making sure I used it a bit first to get it warmed up.  All the while with the warranty getting closer and closer to expiration.   Finally, we got it to do it in the shop.  But for a fix, they just sprayed it with air, and told me to "see if that works".  It didn't.  And I ask you, why is it in no other visit, they could not have come to this ground breaking solution? Did they really have to feel it get hot to realize overheating may have something to do with a clogged fan? 
    I should also note that they then proceeded to put it back together wrong, and I was unable to open it because a misplaced screw caused it to lock shut.  It took two days to get a new appointment to get it fixed, even when I called to explain that it was their error, and I really, really, needed my laptop.
    Anyway, as I said, it didn't fix the problem. So I had to go back yet again, at this point I can't remember if I was still under applecare or if it had just expired.  It doesn't matter, because, again, without being able to make it get hot on their own (even though they had case history where it was clear that it had, and this was not just in my imagination, and even more case history showing it had a history of instability), they couldn't offer me any solutions.  All they could do, they said, was suggest that I leave it with them for "about a week" to check it over.  A week!! Who goes without a computer for a week?!?! I'm not a student in 1985.  
    So now, I'm sitting here writing you am email from my laptop which is sitting on a towel in my lap to protect my thighs from mac burn.  The warranty has now long passed, but the problem has now finally progressed to the point that it takes much less than 30 to reach scalding point, so I could prove it if there were any point.  But there isn't, because now when I call the apple people, they assure me that it must be a hardware issue (and furthermore that the apple employees should have been able to tell me this over a year ago), and unless I want to buy parts there just isn't anything that they can do.  Which leads me to my next point, if the problem started while under warranty, and you have documentation of this, why do I - a poor starving student - have to pay for this just because it took you, Apple, a year and half to finally figure out the problem?
    So to recap, I decided to pay the exorbitant apple costs and make the switch from PC because I thought that the stability of the machines, the so touted excellent customer service, and the superior programs were worth the cost.  And to be fair, the programs are fabulous, the apps integrate smoothly, and it starts up with a flash.  Unfortunately I can't enjoy any of this with my laptop on my lap without risking burning through my pants.  I can only enjoy these benefits for about 30 minutes before it starts freezing due to the heat.  And, a few times a year I have to make multiple journeys to the apple store (which is, to be fair, really quite a nice store) to get the latest hardware problem fixed, which means I'm often without it for days to over a week at a time.  All in all, it's not worth the money to me - one of those young, hip, cutting edge media types you are trying so hard to market to - until you can fix your customer service issues, put knowledgable people in positions to help, and have the internal support systems to get it done with at least enought efficiency to keep up with the technology demands of the modern world. 

    It sounds as if this is coming back to Norton Security...
    "LiveUpdate_solved" in "Norton 360"
    The article by author "rab60" contains detailed instructions on the Live Update solution.
    You might try a more thorough search of the Norton community forum... I do not use Norton and cannot comment on whether any of the solutions work.
    Kind Regards,
    Dragon-Fur

  • NEW VERSION has a serious problem with the recepient fields

    TO
    CC
    BCC
    old version I could paste from excel a list of email addresses into the TO field and it would work perfectly even if:
    they had a "," (comma) at the end of each email
    or if
    they had a line break (one empty row)
    TB would just recognize them as valid - for example:
    "[email protected],
    [email protected]
    [email protected]"
    would be treated as
    [email protected]
    [email protected]
    [email protected]
    ~~~~~~~~~~~~ NEW VERSION BUG:
    it chokes at both the comma and the empty line -- it sends the message but puts a comma as
    ",[email protected]"
    when sending the [email protected] line for example.
    PLEASE FIX THIS PROBLEM.
    THANK YOU
    Also I find the graying of the header section when not active to be annoying BECAUSE IT MAKES IT HARD TO READ (BLACK ON GRAY HAS NO CONTRAST) -- WHY MAKE IT SO FANCY AND BAD? TB IS GREAT ALREADY
    THANK YOU

    Hi Toad - thanks for the note. I saw that you were able to recreate it -- your first reply talking about importing addresses .csv etc. is all fine but the way I have used TB for years is as follows. I run several mailing lists etc.
    for example
    I go to excel
    and I copy let's say a 100 rows (1 column) that contain either
    ~~~~~~~~~~~~~~~~~~~~~~
    [email protected]
    [email protected], [email protected]
    [email protected],
    <BLANK cell anywhere>
    ~~~~~~~~~~~~~~~~~~~~~~
    THEN I go to TB - put curser in BCC field (change TO to BCC) - and hit paste.
    It pastes it as one line.
    THEN I press RETURN
    and it separates it to multiple BCC lines.
    This has always worked.
    The new version chokes at this
    AT THE BLANK LINE
    AT THE COMMA
    ETC.....
    Thanks for reporting it b/c it's a very important bug.
    ''Toad-Hall [[#answer-670828|said]]''
    <blockquote>
    I've just tested this on my system.
    Test one:
    Copy pasted two email addresses from a column in an excel sheet.
    One was above the other - no blank rows.
    Pasted as two email addresses separated by a comma.
    Sent and received ok, so the commas did not cause an issue.
    Test two:
    Created a blank line/row in excel sheet between the two email addresses, then copy pasted the two plus the blank line.
    In TO field this was shown as: email address followed by two commas then last email address.
    When sent this caused the second email address to become invalid. After fist comma, it added double quotes followd by a comma (where the blank line was positioned) then added another double quote just before the @ in the second email address. this made the second email address invalid.
    So it is definately not working with blank lines.
    First email received ok, second email returned a Mail Delivery Service Delivery Status Notification - Recipient address rejected: User unknown in virtual mailbox table.
    However, if you imported the .csv file as an address book, you could use it within Thunderbird. If wanting to send one email to several people, then create Mailing Lists. This does not fix your scenario, but it will resolve the issue of sending one email to a group of valid email addresses.
    Info on Mailing lists.
    * https://support.mozilla.org/en-US/kb/how-create-and-use-mailing-lists
    </blockquote>

Maybe you are looking for

  • Confirmation creation error in web portal using BRF

    Hi SRM Gurus, We are new to SRM 7.0. Currently we are trying to create a confirmation step through BRF to get approval for confirmation of  goods received.  We are using a copy of the FM: /SAPSRM/WF_BRF_0EXP000 with the following parameters:    0C_C1

  • How to Pass APP_USER to a database trigger for auditing

    I have a table which is updated by an Apex Page. (Application Express 4.2.1.00.08). The application is using the standard Oracle apex authentication. I have created an Audit table with a before update trigger to insert a record into the audit table o

  • Export PDF Form to XML through VBScript

    Hi, I was wondering if there is a way to automate the export of an Adobe PDF Form to XML, either using the Adobe SDK/AcroExch.App or the PDF Test Toolkit. I'm wanting to perform this action via a QuickTest Pro Script and thought there might be a func

  • ABAP HR Module

    Hi! What is the diffrerence between Norrmal ABAP(SD, MM FICO) and ABAP HR? If somebody working in suppose SD Module then cant he work on ababp HR module. Regards...Chang..............

  • Testing tools for Servlet

    hi , Iam using Tomcat for my web application, Application generates reports using Servlets and Jsp. when no of users are more the Session Clash occurs ,also Session expires, are there any tools to test the session handling and simulate no of users .